Upper
Palmetto State Armory AR-15 Stripped Upper Receiver
Palmetto State Armory's stripped upper: a "Forged 7075-T6 A3 AR upper", "hard coat anodized black for durability", "Featuring M4 feedramp cuts and no T marks". "Does Not Include Ejection Port Assembly or Forward Assist Assembly."

- Weight
- No weight on file yet: No page states one: Palmetto State Armory's page for it, saved by the user on 2026-10-12, has no weight row and none in its text (Manufacturer, Platform, Material, Finish), and no other source is on file (the maker's site refuses the reader, D59; no seller's page for it has been harvested). Not estimated: a build with it says its total is unknown.
- Lowest price
- $69.99 at Palmetto State Armory, read Oct 12, 2026
- Maker's number
- 51655109407
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- palmettostatearmory.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision M4E1 Threaded upper receiver.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Weight (the stripped receiver: no port door, forward assist or barrel)No value yetMissingNo source yet
No page states one: Palmetto State Armory's page for it, saved by the user on 2026-10-12, has no weight row and none in its text (Manufacturer, Platform, Material, Finish), and no other source is on file (the maker's site refuses the reader, D59; no seller's page for it has been harvested). Not estimated: a build with it says its total is unknown.
Bore axis above the takedown pin centre0.877 in ± 0.0015 in 22.3 mmConfirmedWorked out: {std.ar15.bore_axis_y}
Worked out 0.8775 in ± 0.0015 in used
{std.ar15.bore_axis_y}, harvested
The standard's. Palmetto State Armory's page: "Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts and no T marks." It names no standard; its being the Army drawing's receiver is what "A3 AR upper" is taken to say, and each face is tried on its photo.
Photo 0.876 in ± 0.02 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the threaded nose's top and bottom edges over x 6.75 to 6.95 read 1.480 and 0.256 from the pin line (its silhouette's edges lie within a hundredth of the mid-plane from a lens 0.5 below its axis): their middle 0.868, and at that end the picture is 0.94% smaller than between the holes (the receiver's rear end is nearer the lens: the tooth tops stand 2.136 over the takedown hole and 2.099 over the pivot's): 0.876; ± is a pixel
The drawings' figure; this receiver's own photo puts its nose's axis within its ± of it.
The top rail's surface above the pin line2.09 in ± 0.02 in 53.1 mmProvisionalPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo 2.09 in ± 0.02 in used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the tooth tops read 2.117 at mid-length (2.136 over the takedown hole, 2.099 over the pivot's: the receiver's rear end is nearer the lens); the silhouette's top is the rail's near upper edge, 0.36 nearer than the mid-plane and 1.8 above where the lens stands: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z): 2.088; ± is a pixel and the lens's distance
Read on the page's one photo in the frame of its own lug holes. The catalog's other forged flat tops read 2.09 the same way (expo-arms-stripped-upper.rail_top_above_pin, aero-m4e1-threaded-upper.rail_top_above_pin) and the reference model of a mil-spec forging has 2.090.
The rearmost rail slot's centre ahead of the takedown pin1.31 in ± 0.02 in 33.3 mmProvisionalPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo 1.31 in ± 0.02 in used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the 13 gaps' centres on rows 207 to 211 run from 1.302 to 6.098 in the frame, bounded by the teeth's near edges 0.41 nearer than the mid-plane: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z), and the picture's scale falls 0.26% to the inch toward the muzzle (the tooth tops stand 2.136 over the takedown hole and 2.099 over the pivot's): the first slot at 1.317, the last at 6.030, which is the first at 1.302 by the standard pitch; their mean, ± for the lens's distance and a pixel
Expo Arms' forged flat top reads 1.314 on a photo four times this one's size (expo-arms-stripped-upper.rail_slot0_x): the same forging's rail, within this reading's ±.
How many rail slots13ProvisionalPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo 13 count used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the see-through gaps along the top edge, counted on rows 207 to 211
Behind the first is a solid run of rail over the charging handle's channel (from rail_rear_x), ahead of the last a long tooth to the front shoulder. Unmarked: the page's "no T marks".
The top rail's head: where it begins ahead of the tongue, X (the app draws the head from here)0.416 in ± 0.006 in 10.6 mmProvisionalWorked out: {std.ar15.rail_tongue_shoulder_x}
Worked out 0.4165 in ± 0.006 in used
{std.ar15.rail_tongue_shoulder_x}, from the site owner
Until 2026-10-20 this was the rail's rearmost point (now rail_tongue_rear_x), and the app drew the head at its full width from there, square: the charging handle's T, cut round for a rounded rail end, stood in its corners. Behind this the rail is the standard's tongue (std.ar15.rail_tongue_*), which the receiver's model carries, as the 22RB's does.
The top rail's tongue: its rounded end's rearmost point, X ahead of the takedown pin-0.57 in ± 0.025 in -14.5 mmProvisionalPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo -0.57 in ± 0.025 in used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the rail's tail's rear end in the traced outline (profiles.side): -0.574 at y 2.12, -0.567 at y 1.93, its tip taken on the mid-plane (a mil-spec forging's tail is rounded in plan: expo-arms-stripped-upper.rail_rear_x, -0.588 on a larger photo); ± is a pixel and a half
The top rail's front end ahead of the takedown pin6.591 in ± 0.011 in 167.4 mmConfirmedWorked out: {.front_face_x} - {std.ar15.upper_barrel_thread_length}
Worked out 6.591 in ± 0.011 in used
{.front_face_x} - {std.ar15.upper_barrel_thread_length}, harvested
The rail's last tooth ends flush with the body's front shoulder, where the barrel-nut thread begins (the photo): the drawing's .445 REF behind the front face.
Photo 6.6 in ± 0.03 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the silhouette's front edge at the rail's height reads 6.669; it is the shoulder's near edge, about 0.37 nearer than the mid-plane: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z): 6.600; ± is a pixel and the lens's distance
The drawing's shoulder; the photo's edge lands on it within its ±.
Ahead of it the receiver is the barrel nut's thread.
The receiver's rear face behind the takedown pin (negative)-0.621 in ± 0.005 in -15.8 mmConfirmedWorked out: {std.ar15.upper_rear_face_x}
Worked out -0.621 in ± 0.005 in used
{std.ar15.upper_rear_face_x}, harvested
The Army's drawing of the upper (8448524). Palmetto State Armory's page: "Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts and no T marks." It names no standard; its being the Army drawing's receiver is what "A3 AR upper" is taken to say, and each face is tried on its photo.
Photo -0.63 in ± 0.05 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the silhouette's rear edge at y 1.45 to 1.62 reads -0.720, where the forward assist's housing joins the wall: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z); taken as an edge 0.32 nearer than the mid-plane it is -0.67, at 0.6 nearer -0.63, at 0.9 (the housing's root) -0.58: ± covers that
The drawing dimensions the face; the photo agrees with it within its ±.
The receiver's front face (the end of its barrel-nut thread) ahead of the takedown pin7.036 in ± 0.005 in 178.7 mmConfirmedWorked out: {std.ar15.upper_front_face_x}
Worked out 7.036 in ± 0.005 in used
{std.ar15.upper_front_face_x}, harvested
The Army's drawing: .661 ahead of the pivot lug's hole. Palmetto State Armory's page: "Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts and no T marks." It names no standard; its being the Army drawing's receiver is what "A3 AR upper" is taken to say, and each face is tried on its photo.
Photo 7.05 in ± 0.03 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the silhouette's front tip reads 7.172: the thread's near rim, 0.62 nearer than the mid-plane and 4.6 in from where the lens stands: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z): 7.043, and 0.006 more for the picture's fall of scale toward the muzzle; ± is a pixel and the lens's distance (18.7 in makes it 7.02, 25.7 in 7.06)
The drawing dimensions the face; the photo lands on it within its ±.
The receiver's underside above the pin line0.248 in ± 0.0015 in 6.3 mmConfirmedWorked out: {std.ar15.deck_y}
Worked out 0.2485 in ± 0.0015 in used
{std.ar15.deck_y}, harvested
It sits on the lower's deck.
Photo 0.245 in ± 0.02 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the silhouette's lower edge between the lugs reads 0.243 over x 1.0 to 5.5: the wall's near lower edge, 0.45 nearer than the mid-plane and 0.09 below where the lens stands: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z): 0.002 more; ± is a pixel
The lower's deck; the photo's edge lands on it within its ±.
Width of the receiver's body1.18 in ± 0.02 in 30 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View G-G; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “FORGED DIA 1.18 DIA REF -V-” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View G-G; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The round body just behind the threaded nose, as aero-m4e1-threaded-upper.width reads it. Not measured on this receiver: its page has one photo, of its side.
The mil-spec forging's: the page calls it a "Forged 7075-T6 A3 AR upper". Its forward assist's housing and brass deflector stand out past it on the right.
The notch under the rail's rear end (the charging handle's room), its floor above the pin line1.6 in ± 0.03 in 40.6 mmProvisionalPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo 1.6 in ± 0.03 in used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the see-through notch's lower edge in the traced outline (profiles.side) reads 1.631 at x -0.5 to -0.1; there the picture is 0.9% larger than between the holes (the rear end nearer the lens): 1.616; and what bounds a see-through from below is the wall's near upper edge, 0.32 nearer than the mid-plane and 1.3 above where the lens stands: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z): 1.597; ± is a pixel and a half
The wall's top behind the notch's front wall: what a charging handle's block lies on.
The notch under the rail's rear end, its roof (the rail's tail's underside) above the pin line1.89 in ± 0.03 in 48 mmProvisionalPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo 1.89 in ± 0.03 in used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the see-through notch's upper edge in the traced outline (profiles.side), the rail's tail's underside, reads 1.884; 0.9% less for the picture's scale at that end: 1.867; and what bounds a see-through from above is the far lower edge, 0.31 further than the mid-plane and 1.5 above where the lens stands: 1.888; ± is a pixel and a half. The notch is 0.29 high so, for the 0.31 to 0.32 the Army's drawing scales to (expo-arms-stripped-upper.handle_seat_x) and a handle .2985 thick
The charging handle's channel above the bore's axis0.856 in ± 0.007 in 21.8 mmConfirmedWorked out: {std.ar15.charging_handle_axis_y} - {.bore_axis_above_pin}
Photo 0.87 in ± 0.03 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the notch in the rear end, from the wall's top to the rail's tail's underside: 1.597 to 1.888 once its two edges are brought back through the lens (notch_bottom_y, notch_top_y): its middle 1.743, less the bore's 0.8775: 0.865
Worked out 0.8563 in ± 0.007 in used
{std.ar15.charging_handle_axis_y} - {.bore_axis_above_pin}, from the site owner
Riding on its guide lugs on the channel's tier: std.ar15.charging_handle_axis_y.
A handle rides on its guide lugs on the channel's tier (std.ar15.charging_handle_axis_y, the Army's drawing's); the photo reads the see-through notch's middle, which is the room the handle's block lies in, and agrees within its ±.
The notch the handle's latch end lies in: the handle lies at its height (as expo-arms-stripped-upper.charging_handle_above_bore, 0.87).
The charging handle's seat: the front wall of the open notch under the rail's rear end, ahead of the takedown pin0.06 in ± 0.03 in 1.5 mmCorroboratedPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo 0.06 in ± 0.03 in used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the see-through notch's front wall in the traced outline (profiles.side): its flat at x 0.060 from y 1.732 to 1.859, between two corners cut back to x 0.037 and -0.028. What shows through a notch is bounded by the wall's near edge, 0.32 to 0.45 nearer than the mid-plane: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z), so that edge reads 0.04 behind the wall itself, which would be at 0.10; ± covers the pixel (0.016) and half of that
Standard 0.075 in ± 0.015 in
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation, scaled (the notch has no callout in this view); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Scaled, not a callout. On the 6600 px scan the two lug holes, fitted as circles, are 1966 px apart (308.4 px/in over std.ar15.pin_spacing) and the notch's front wall (column 2427.5) is 21.5 px ahead of the takedown hole's centre: 0.070. From the rear face's line, 217 px behind the wall, it is 0.083: the drawing dimensions that face at -0.621 and the scan has it at -0.634 by the holes. Between the two; ± covers both. The notch is 0.31 to 0.32 high there, for the handle's .2985 (drawing 8448518), its front corners cut back 0.06.
This receiver's own notch in the outline its model is built from, where the model's wall is: a handle seated there stands in nothing. The Army's drawing, scaled, reads +0.015 from it, inside both ±.
Where a charging handle stops: the front wall of the notch cut across the receiver under the rail's rear end, open to the rear. The handle's block lies in it with its shoulder against this wall, and the shaft runs on through the slot ahead of it (expo-arms-stripped-upper.handle_seat_x has the photo of one seated).
The side photo: its lens's distance from the receiver's mid-plane22 in ± 4 in 558.8 mmProvisionalPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo 22 in ± 4 in used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by two readings, 7 in apart: the lug holes' rims give 18.7, the fit's own ± 0.2 and its residual large (the bores' lit walls aren't in it); the rail's 13 slots, bounded at the teeth's near edges 0.41 out, run 25.17 px to the slot for the mid-plane's 24.80, 1.65% long once the picture's own fall of scale along the receiver is out of it: 25.7. Taken between them; ± covers both, and moves what is read 1.1 in out (the forward assist's rear face) by 0.03
A property of Palmetto State Armory's photo 55761f177232, not of the receiver: the model corrects what the right side shows nearer the lens (the forward assist's rear face, the deflector, the hinge lugs, the lugs) by it.
The side photo: where its lens stands, X2.58 in ± 0.3 in 65.5 mmProvisionalPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo 2.58 in ± 0.3 in used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by as right_photo_lens_distance: the two holes' far rims sit off their near ones toward px (235.5, 318.6), the fit's ± 2.2 px; the rail's teeth show their rear faces ahead of about x 3.5 and none behind it. ± is widened for the fit's residual
The side photo: where its lens stands, Y0.33 in ± 0.3 in 8.4 mmProvisionalPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo 0.33 in ± 0.3 in used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by as right_photo_lens_x: px row 318.6, the fit's ± 2.9 px: about level with the lugs, under the bore
The round body's radius about the bore (the forging's)0.59 in ± 0.01 in 15 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View G-G; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “FORGED DIA 1.18 DIA REF -V-” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View G-G; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Model 0.6 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): cylindrical faces r 0.6000 about the bore's axis, x -0.43 to 6.59
The drawing's forged figure; the model's is 0.01 more.
The bore the bolt carrier runs in1 in ± 0.002 in 25.4 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: note 4; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “DIA -P- (IN 1.000 DIA ±.002 AREA)” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: note 4; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The rail's dovetail, its foot (where the neck begins), Y above the pin line1.885 in ± 0.003 in 47.9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.885 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the planes under the dovetail at y 1.885, z 0.309 to 0.333
The rail's dovetail at its foot, half its width0.323 in ± 0.013 in 8.2 mmProvisionalWorked out: {std.picatinny.bevel_width} / 2 + {std.picatinny.lower_gauge_below_top} - ({.rail_top_above_pin} - {.dovetail_foot_y})
Model 0.333 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the planes at y 1.885 reach z 0.333
Worked out 0.323 in ± 0.013 in used
{std.picatinny.bevel_width} / 2 + {std.picatinny.lower_gauge_below_top} - ({.rail_top_above_pin} - {.dovetail_foot_y}), harvested
The standard's lower face carried on at its 45 degrees from the lower gauge line (.748 across, .154 below the rail's top) to the height the reference model has the foot at: the face every other rail on file has (the teeth the app draws on this body, a handguard's own rail) and every clamp's channel is cut to. ± is the gauge line's .010 and the model's .003.
The standard's: a rail's head is MIL-STD-1913's, and every clamp's channel is cut to it (pipeline/blender/lib.py rail_seat). The reference model draws the same face a hundredth further out, at the standard's stated .164 where the ledger has the middle of .164 -.020 (std.picatinny.lower_gauge_below_top): inside the standard's band, but a body drawn so stands in every clamp (expo-arms-stripped-upper.dovetail_foot_half_width). The model isn't authoritative beside the standard; its neck and the foot's height are still its own.
The rail's neck below its dovetail, half its width0.309 in ± 0.003 in 7.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.309 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the planes at y 1.700 and 1.885 begin at z 0.309
The rail's neck, where it meets the receiver's sides, Y1.7 in ± 0.003 in 43.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.7 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the planes at y 1.700, z 0.309 to 0.319
The receiver's sides below the rail's neck, half its width0.319 in ± 0.003 in 8.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.319 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the planes at y 1.700 end at z 0.319; a .10 fillet below them
The receiver's sides, where they turn into the round body, Y1.44 in ± 0.005 in 36.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.44 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the r .10 fillet between the flat side and the round body, its axis at y 1.440, z 0.419
The walls below the round body down to the underside, half the width0.453 in ± 0.003 in 11.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.453 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the r .075 fillets at y 0.458, their axes at z 0.528
The flange round the rear end, its radius about the bore0.694 in ± 0.003 in 17.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.6938 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): cylindrical faces r 0.6938 about the bore's axis from the rear face to x -0.470, on both sides
The raised lip that follows the rear end's contour, the forging's.
The rear flange's front face, X-0.47 in ± 0.005 in -11.9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model -0.47 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the r 0.6938 faces end at x -0.470
The takedown and pivot lugs' width0.494 in ± 0.0015 in 12.6 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the rear elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.496 -.003 BOTH LUGS” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the rear elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The reference model has them 0.494.
The takedown lug's rear face, how high it rises into the body, Y0.458 in ± 0.005 in 11.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.458 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the plane x -0.236 from y -0.212 to 0.458; the r .75 corner faces lie outside z ±0.247
Behind it the body's lower rear is cut away either side of the lug's width, to the arc a lower's rear walls rise along (std.ar15.rear_wall_arc_r; the upper's own is std.ar15.upper_rear_corner_r).
The lugs' pin holes0.251 in ± 0.001 in 6.4 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.250 DIA +.002 THRU (the takedown lug's, CSK .31 DIA X 90 INCL THIS SIDE ONLY); .250 DIA +.001 THRU (the pivot lug's)” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The photo's two holes are fitted with this diameter (right_photo_lens_*).
The barrel-nut thread's major diameter1.244 in ± 0.0044 in 31.6 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “1 1/4 -18 UNEF-2A MAJOR DIA - 1.2485/1.2398 (AFTER ANODIZE)” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Photo 1.236 in ± 0.025 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the nose's top to its bottom over x 6.75 to 6.95: 1.224, and the picture 0.94% smaller at that end than between the holes: 1.236; ± is a pixel each side. A black thread on white reads thin, its crests' tips lost
The drawing's thread: the barrel nut's is the same on every AR-15 receiver, and the page calls this an "A3 AR upper"; the photo reads under, as a black thread does on white at this size.
The barrel-nut thread's minor diameter1.18 in ± 0.003 in 30 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “MINOR DIA - 1.1803 MAX” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The barrel-nut thread's turns to the inch18ConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “1 1/4 -18 UNEF-2A” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The gas tube's hole in the front shoulder0.183 in ± 0.0015 in 4.7 mmConflictStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View F-F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.182 DIA +.003 THRU; .312 DIA +.010 BACK BORE” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View F-F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Model 0.175 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): a cylinder r 0.0875 along x at y 1.662, z 0 (0.783 above the bore), x 6.401 to 6.591
The drawing's callout; the model's hole is 0.008 smaller.
tdp and model differ by 0.009 in beyond what each states it is good to.
Above the thread on the bore's mid-plane, std.ar15.gas_tube_above_bore above the bore. Not visible in this receiver's one photo: the drawing's.
The gas tube hole's four corner reliefs, diameter0.094 in ± 0.002 in 2.4 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View F-F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.047 R, 4 PLACES EQUALLY SPACED RANDOM ORIENTATION EXCEPT MUST NOT INTERSECT THREADS” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View F-F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Model 0.09 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): four cylinders r 0.0450 along x round the gas tube's hole
The drawing's radius; the model's is 0.002 less.
The gas tube hole's corner reliefs, off its centre each way0.078 in ± 0.003 in 2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.078 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): their axes at y 1.585 and 1.740, z ±0.078: 0.0775 and 0.078 off the hole's centre
The ejection port's length3.125 in ± 0.005 in 79.4 mmConflictStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “3.125; .25 R TRUE 2 PLACES; 1.562 ±.010” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Photo 3.07 in ± 0.04 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the dark opening from px column 261 to 459: 2.981 to 6.126, in the wall 0.55 nearer than the mid-plane: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z): 2.971 to 6.037; ± is two pixels
The callout; the brass deflector, added after the port is cut, sets the opening's rear end where the photo shows it.
tdp and photo differ by 0.055 in beyond what each states it is good to.
The opening reads short of the callout, as it does on Expo Arms' and Aero's photos and on the reference model (3.097): the drawing marks .005 and .042 beside the 3.125's two ends, which may be the opening's own ends inside it.
The ejection port's front end ahead of the takedown pin6.036 in ± 0.01 in 153.3 mmConfirmedWorked out: {.front_face_x} - 1.00in
Worked out 6.036 in ± 0.01 in used
{.front_face_x} - 1.00in, from the site owner
8448524 sheet 1: "1.00" from the 3.125's front end to the receiver's front end (read on the scan at 309 px/in: the two extension lines are 1.00 apart).
Photo 6.04 in ± 0.03 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the opening's front end, px column 459: 6.126, corrected as port_length
The drawing; the photo agrees within its ±.
The port's lower edge above the pin line, seen from the side (its ends R .25: 0.50 high)0.841 in ± 0.01 in 21.4 mmConfirmedStandard: 8448524 sheet 1 side view, scaled (not a callout): its lower straight edge at px row 3640 against the lug holes' row 3900 at the sheet's own 309.3 px/in (the lug holes 6.375 apart), as aero-m4e1-threaded-upper.port_bottom_y read it; a half-size crop reads 0.847 here
Standard 0.841 in ± 0.01 in used
8448524 sheet 1 side view, scaled (not a callout): its lower straight edge at px row 3640 against the lug holes' row 3900 at the sheet's own 309.3 px/in (the lug holes 6.375 apart), as aero-m4e1-threaded-upper.port_bottom_y read it; a half-size crop reads 0.847 here, from the site owner
Photo 0.87 in ± 0.03 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the dark opening's lower edge, px row 283: 0.881 above the pin line there, corrected as port_length; its upper edge reads 0.5 above it
The drawing's outline at its own scale; the photo agrees within its ±.
The port's ends' radius (half its height from the side)0.25 in ± 0.005 in 6.3 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.25 R TRUE 2 PLACES” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The forward assist's axis, turned inward toward the front in plan20° ± 1°ConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section (CL HOLE at 20°, 1.0285 ±.0050, .509 DIA ±.003, .315 DIA ±.001); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “20°” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section (CL HOLE at 20°, 1.0285 ±.0050, .509 DIA ±.003, .315 DIA ±.001); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The reference model has 22.5 (aero-m4e1-threaded-upper.fa_axis_angle): the drawing wins.
The forward assist's bore0.509 in ± 0.003 in 12.9 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.509 DIA ±.003” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The forward assist's bore, how deep its .509 runs from the housing's rear face0.65 in ± 0.01 in 16.5 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.65” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Read as the .509 bore's depth along its axis; ahead of it the hole is the .315.
The forward assist's inner bore, ahead of the .5090.315 in ± 0.001 in 8 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.315 DIA ±.001” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The forward assist's axis: a point on it, X-0.395 in ± 0.005 in -10 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model -0.395 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the r .25 bore's axis through (-0.395, 0.879, 1.090)
With fa_axis_z and the drawing's angle this places the axis; scaled off the drawing's plan view (309 px/in) the hole's centre line is 1.0285 from the receiver's centre line 0.41 ahead of the rear face, which puts it at 1.097 here.
The forward assist's axis: that point out from the middle (Z)1.09 in ± 0.01 in 27.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.09 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the r .25 bore's axis through (-0.395, 0.879, 1.090)
The forward assist housing's rear face where the axis crosses it, X-0.53 in ± 0.05 in -13.5 mmProvisionalPhoto: Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546
Photo -0.53 in ± 0.05 in used
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the bore's opening at the housing's rear, the dark ellipse about px column 29.5: -0.697, 1.13 nearer than the mid-plane: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z); ± is a pixel and what the lens's distance leaves (0.03)
The housing runs back to the rear end, as the drawing's side view has it and as Expo Arms' forging does (expo-arms-stripped-upper.fa_rear_x: -0.49 on a larger photo); the reference model's stops at -0.34.
The forward assist housing's radius about its axis0.313 in ± 0.003 in 7.9 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.3125 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the housing's cylinder r .3125 on the bore's axis
Photo 0.32 in ± 0.02 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the housing's rear rim, px rows 259 to 301: 0.667 high, 1.13 nearer than the mid-plane: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z); halved; ± is a pixel each side
The forging's; the photo's rim agrees within its ±.
The brass deflector's crest, out from the middle (Z; the forging's)1.25 in ± 0.05 in 31.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.25 in ± 0.05 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): its crest's faces (a sphere and r .125, r 1.35 cylinders) reach z 1.20 to 1.30 at x 2.31 to 2.34, y 1.11 to 1.32
The mil-spec forging's: no end or top view of this receiver is on file to read its own on.
The deflector's crest, X2.32 in ± 0.02 in 58.9 mmConflictModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 2.32 in ± 0.02 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): its crest's faces at x 2.308 to 2.337
Photo 2.4 in ± 0.05 in
Palmetto State Armory's product photo 51655109407.jpg, in the page the user saved on 2026-10-12: the stripped receiver's right side on white, 546 x 546, from the site owner
Scale: its own lug holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once, their midpoints the frame's points: 62.96 px/in on the receiver's mid-plane, a pixel 0.016 in; the rail's 13 slots, read at the teeth's near edges, run 1.5% over the standard pitch on it, as a lens some 26 in away makes them. Read by the crease between its steep rear face and its long slope, px columns 221 to 224 on a lightened enlargement: 2.387, 1.25 nearer than the mid-plane: the lens stands about 22 in away opposite x 2.58, y 0.33 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 22 / (22 - z); ± is three pixels: the crease is soft at this size
The model places the crest. This receiver's photo has the crease 0.08 further forward, read on a lightened enlargement of a 546 px picture: a difference that stays in sight, and that an end or a top view would settle.
model and photo differ by 0.08 in beyond what each states it is good to.
The deflector's slope where it ends at the port, out from the middle (Z; the forging's)0.82 in ± 0.03 in 20.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.82 in ± 0.03 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): its slope's faces come down to z 0.813 at x 2.886
The port door's hinge pin, Y0.641 in ± 0.003 in 16.3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.641 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the two lugs' r .0625 holes and r .1365 bosses on one axis at y 0.641, z 0.689
This receiver's photo shows its two hinge lugs about where the model has them (profiles.side, hinge_rear and hinge_front, brought back through the lens): the rear one from 2.82 to 2.94 against the model's 2.837 to 2.932, the front one from 6.12 to 6.29 against 6.079 to 6.235, three pixels ahead. Each is drawn where the photo has it.
The port door's hinge pin, out from the middle (Z)0.689 in ± 0.003 in 17.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.689 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): as hinge_axis_y
The hinge lugs' radius about the pin0.137 in ± 0.003 in 3.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.1365 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the lugs' cylindrical faces r .1365
The hinge pin's hole0.13 in ± 0.0015 in 3.3 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: Section B-B; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.128 DIA +.003 THRU 2 HOLES IN LINE” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: Section B-B; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Model 0.125 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the lugs' holes r .0625
The drawing's callout; the model's holes are 0.004 smaller.
The cam pin's pad on the left side, its face out from the middle (Z, to the left)0.563 in ± 0.003 in 14.3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.5625 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the round along the pad's top edge, r 0.0938 about an axis along x at (y 1.486, z -0.469), so its face at z -0.563; expo-arms-stripped-upper.cam_pad_face_z reads the same file's flat face at z -0.561 to -0.564 over x 4.60 to 5.58, y 1.05 to 1.63
The pad over the cam pin's travel is the forging's: the Army's machined drawing doesn't show it. The page has no view of the left side: this is the mil-spec forging's, not read on this receiver.
The cam pin's pad, its face's rear edge ahead of the takedown pin4.6 in ± 0.01 in 116.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 4.6 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the pad's flat face at z -0.561 to -0.564 over x 4.60 to 5.58, y 1.05 to 1.63
The page has no view of the left side: this is the mil-spec forging's, not read on this receiver.
The cam pin's pad, its face's front edge5.58 in ± 0.01 in 141.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 5.58 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the pad's flat face at z -0.561 to -0.564 over x 4.60 to 5.58, y 1.05 to 1.63
The page has no view of the left side: this is the mil-spec forging's, not read on this receiver.
The cam pin's pad, its face's lower edge above the pin line1.05 in ± 0.01 in 26.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.05 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the pad's flat face at z -0.561 to -0.564 over x 4.60 to 5.58, y 1.05 to 1.63
The page has no view of the left side: this is the mil-spec forging's, not read on this receiver. Its lower edge runs into the round body.
The cam pin's pad, its face's upper edge1.63 in ± 0.01 in 41.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.63 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the pad's flat face at z -0.561 to -0.564 over x 4.60 to 5.58, y 1.05 to 1.63
The page has no view of the left side: this is the mil-spec forging's, not read on this receiver.
The cam pin's pad, the round along its face's edges and at its upper corners0.094 in ± 0.003 in 2.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.094 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the round along the pad's top edge, r 0.0938 about (y 1.486, z -0.469), and its two upper corners' rounds about z, r 0.0938 at x 4.695 and 5.488
The page has no view of the left side: this is the mil-spec forging's, not read on this receiver. BCM's forging reads 0.115 on its own photo (bcm-m4-upper.cam_pad_edge_round).
The charging handle latch's slot in the left wall: the wall left between it and the notch's front wall (handle_seat_x)0.156 in ± 0.005 in 4 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: Section D-D (cut along the notch's centre line, View C-C: the left wall at the rear); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.156” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: Section D-D (cut along the notch's centre line, View C-C: the left wall at the rear); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The page has no view of the left side: this is the mil-spec forging's, not read on this receiver. As bcm-m4-upper.latch_slot_wall reads the drawing.
The latch's slot, along the receiver (its ends full rounds of half this)0.195 in ± 0.005 in 5 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: Section D-D (cut along the notch's centre line, View C-C: the left wall at the rear); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.195” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: Section D-D (cut along the notch's centre line, View C-C: the left wall at the rear); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
View C-C marks the slot's end FULL R.
Model 0.192 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: two rounds about z, r 0.0960, at (x 0.329, y 1.616) and (x 0.329, y 1.839), from the wall's face at z -0.318 in to the slot's floor at -0.251; the flat between them from x 0.233 to 0.425
The drawing's callout; the reference model's is within 0.003 of it.
The page has no view of the left side: this is the mil-spec forging's, not read on this receiver. As bcm-m4-upper.latch_slot_length reads the drawing.
The latch's slot, its lower end above the pin line1.52 in ± 0.003 in 38.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.52 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: two rounds about z, r 0.0960, at (x 0.329, y 1.616) and (x 0.329, y 1.839): the slot from y 1.520 to 1.935
The page has no view of the left side: this is the mil-spec forging's, not read on this receiver. Its heights have no callout in the drawing's View C-C or Section D-D: the reference model's.
The latch's slot, its upper end above the pin line1.935 in ± 0.003 in 49.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.935 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: two rounds about z, r 0.0960, at (x 0.329, y 1.616) and (x 0.329, y 1.839): the slot from y 1.520 to 1.935
The page has no view of the left side: this is the mil-spec forging's, not read on this receiver. Its heights have no callout in the drawing's View C-C or Section D-D: the reference model's.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver pins
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
Barrel extension
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
Handguard mount
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Barrel nuts
- BCM G.I. Barrel Nut - AR15, Spike's Tactical Delta Ring Assembly w/Mil-Spec Barrel Nut
Bolt carrier channel
Charging handle channel
- Charging handles
- Aero Precision AR15/M4 5.56 charging handle, BCM Ambidextrous MK2 Charging Handle - Large Latch (5.56mm/.223), Radian Weapons AR-15 / M16 Raptor-LT Ambidextrous Charging Handle, Radian Weapons Raptor Ambidextrous Charging Handle AR15/M16, Radian Weapons Raptor-SD Ambidextrous Charging Handle AR15/M16
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Palmetto State Armory $69.99 Oct 12, 2026, in stock that day