Optic
Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount
Aimpoint's Patrol Rifle Optic, a 1x red dot with a 2 MOA dot and a 23 mm clear aperture on a 30 mm tube, in its ring on the QRP2 mount with the spacer an AR-15 takes it on: "ARTICLE NUMBERS Aimpoint® PRO 12841" (Aimpoint's 2011 sheet); the 2021 manual: "Configuration (spacer) 39 mm / 1.5 in (from top surface of Picatinny rail)"; Primary Arms: "Included mount provides absolute co-witness with AR-15 sights". Flip-up lens covers, the rear one clear; a DL1/3N battery in the housing along its right shoulder. The page linked is Bravo Company's: Aimpoint's own site isn't read.

- Weight
- 12.7 oz Conflictpublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026Its sources span 11.55 oz to 12.72 oz.
- Lowest price
- $512.00 at Sportsman's Warehouse, read Nov 21, 2026
- Maker's number
- 12841
- Colour
- Aimpoint dark gray (the Micro's housing)
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Holosun ARO 2 MOA red dot (listed by Holosun as ARO-CORE-RD-2). No build on the start page takes it without a finding: the designer says what.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (the configuration: the sight on its mount with its lens covers, closed)5.354 in 136 mmConflictPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Configuration 136 mm × 70 mm × 81 mm / 5.4 in × 2.8 in × 3.2 in” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Length 130mm (5.1”)”
Aimpoint, Patrol Rifle Optic (PRO) technical specifications (M01224, 2011), the PDF as Mod Armory hosts it, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Weight: 220 g sight only, 360 g with mount. Length: 130 mm.”
Optics Trade, Aimpoint PRO (12841), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Length std conf: 130 mm (5 1/8")”
Mile High Shooting, AimPoint 12841 Patrol Rifle Optic (its long table: some rows are another sight's, a 26 mm aperture and a "Micro spacer XX"), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Size 5.2 x 2.8 x 3.2 in”
City Arsenal, Aimpoint PRO, Patrol Rifle Optic, 2 MOA, Red Dot (12841), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
The maker's newest document, and the one that says what the length is of (the configuration, beside the sight's own): the 2011 figure is the length over the raised covers' rings at this scale (ring_span), and the sellers copy one or the other.
manual and sheet differ by 0.236 in beyond what each states it is good to.
manual and otrade differ by 0.236 in beyond what each states it is good to.
manual and mhs differ by 0.236 in beyond what each states it is good to.
manual and city differ by 0.154 in beyond what each states it is good to.
sheet and city differ by 0.082 in beyond what each states it is good to.
otrade and city differ by 0.082 in beyond what each states it is good to.
mhs and city differ by 0.082 in beyond what each states it is good to.
The 2021 manual's "Configuration" length, beside the sight's own 122 mm: the sight with its lens covers and the mount. Primary Arms' photograph of a unit with both covers closed (a copy on file) is scaled by it, and at that scale the length over the two cover rings with the covers raised (ring_span, on Aimpoint's own left profile) is 130.4 mm: the 2011 sheet's "Length 130mm", which sellers copy, is that length, or a sight of that year; kept, not adopted.
The sight's own length (no mount, no lens covers)4.803 in 122 mmConflictPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Sight 122 mm × 49 mm × 49 mm / 4.8 in × 1.9 in × 1.9 in” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Length 4.8in Width 1.9in Height 1.9in Weight 7.8oz”
Sportsman's Warehouse, Aimpoint Patrol Rifle Optic 1x Red Dot - 2 MOA Dot, a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Length sight only: 115 mm (4 1/2")”
Mile High Shooting, AimPoint 12841 Patrol Rifle Optic (its long table: some rows are another sight's, a 26 mm aperture and a "Micro spacer XX"), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
The maker's own figure; Sportsman's gives the same in inches. Mile High's table carries another sight's rows.
manual and mhs differ by 0.276 in beyond what each states it is good to.
sportsmans and mhs differ by 0.272 in beyond what each states it is good to.
Overall width (the configuration: from the torque knob's face on the left to the sight's right side)2.756 in 70 mmConfirmedPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Configuration 136 mm × 70 mm × 81 mm / 5.4 in × 2.8 in × 3.2 in” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Size 5.2 x 2.8 x 3.2 in”
City Arsenal, Aimpoint PRO, Patrol Rifle Optic, 2 MOA, Red Dot (12841), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
The maker's figure; City Arsenal's agrees in inches.
The manual doesn't say what it spans; the torque knob on the mount's left side is the furthest thing out on the left, and the sight's own 49 mm puts its right side. The model places the knob's face by it (knob_face_z).
The sight's own width (its left flank to its right side: the battery housing and the windage cap)1.929 in 49 mmConflictPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Sight 122 mm × 49 mm × 49 mm / 4.8 in × 1.9 in × 1.9 in” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Length 4.8in Width 1.9in Height 1.9in Weight 7.8oz”
Sportsman's Warehouse, Aimpoint Patrol Rifle Optic 1x Red Dot - 2 MOA Dot, a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Width: 55 mm (2 3/16")”
Mile High Shooting, AimPoint 12841 Patrol Rifle Optic (its long table: some rows are another sight's, a 26 mm aperture and a "Micro spacer XX"), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
The maker's own figure; Sportsman's gives the same in inches.
manual and mhs differ by 0.236 in beyond what each states it is good to.
sportsmans and mhs differ by 0.265 in beyond what each states it is good to.
Overall height (the configuration)3.189 in 81 mmConflictPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Configuration 136 mm × 70 mm × 81 mm / 5.4 in × 2.8 in × 3.2 in” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Size 5.2 x 2.8 x 3.2 in”
City Arsenal, Aimpoint PRO, Patrol Rifle Optic, 2 MOA, Red Dot (12841), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Height std conf: 67 mm (2 5/8")”
Mile High Shooting, AimPoint 12841 Patrol Rifle Optic (its long table: some rows are another sight's, a 26 mm aperture and a "Micro spacer XX"), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
The maker's figure; City Arsenal's agrees in inches. Mile High's table carries another sight's rows.
manual and mhs differ by 0.551 in beyond what each states it is good to.
city and mhs differ by 0.562 in beyond what each states it is good to.
The manual doesn't say what it spans, and no reading on the photos lands on it: at the scale the 136 mm gives, Primary Arms' photograph has 71.9 mm from the mount's lowest edge to the top of the battery housing, 74.6 mm from the clamp's jaws, and 83.1 mm from the torque knob's lowest edge. Kept as published; the model is drawn at the photos' size.
The sight's own height (the main body's underside to the top of the battery housing)1.929 in 49 mmConfirmedPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Sight 122 mm × 49 mm × 49 mm / 4.8 in × 1.9 in × 1.9 in” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Length 4.8in Width 1.9in Height 1.9in Weight 7.8oz”
Sportsman's Warehouse, Aimpoint Patrol Rifle Optic 1x Red Dot - 2 MOA Dot, a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
The maker's own figure; Sportsman's gives the same in inches.
Aimpoint's left profile at the scale the 136 mm gives has 48.1 mm from the main body's round underside (its radius below the axis: half the body's box in the profile) to the top of the battery housing: 2% under the maker's figure.
Optical axis above the rail's top (with the spacer, as 12841 is sold for an AR-15)1.535 in 39 mmConfirmedPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Configuration (spacer) 39 mm / 1.5 in (from top surface of Picatinny rail)” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Aimpoint's 2011 sheet: the spacer "indexes the sight at the optimal height for co-witness with the standard iron sights on Carbine style weapons"; Primary Arms: "Included mount provides absolute co-witness with AR-15 sights". Where the rail's top lies inside the QRP2 isn't seen in a side view: the model's rail top is this far under the axis.
Optical axis above the rail's top without the spacer (for shotguns and submachine guns), not as this part is drawn1.181 in 30 mmConfirmedPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Configuration (no spacer) 30 mm / 1.2 in (from top surface of Picatinny rail)” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
The spacer's height (what it adds under the ring base)0.354 in ± 0.03 in 9 mmConfirmedWorked out: {.optical_axis_above_rail} - {.no_spacer_axis_above_rail}
Worked out 0.3543 in ± 0.03 in used
{.optical_axis_above_rail} - {.no_spacer_axis_above_rail}, harvested
39 mm less 30 mm: 9 mm.
What the maker's two axis heights leave between them. On Aimpoint's left profile the band with the eight holes, from the groove under the ring base's foot to the line over the QRP2, reads 8.7 mm at the scale the 136 mm gives (rows 1044 to 1140).
Weight of the sight alone (no mount), not this part's6.77 ozConflictPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Sight 192 g / 6.8 oz” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Weight 7.8 oz / 220 g (sight only)”
Bravo Company USA, Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount (AIMPOINT-12841), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Weight sight only (incl battery): 220 g (7,8 oz)”
Mile High Shooting, AimPoint 12841 Patrol Rifle Optic (its long table: some rows are another sight's, a 26 mm aperture and a "Micro spacer XX"), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Weight: 220 g sight only, 360 g with mount. Length: 130 mm.”
Optics Trade, Aimpoint PRO (12841), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Length 4.8in Width 1.9in Height 1.9in Weight 7.8oz”
Sportsman's Warehouse, Aimpoint Patrol Rifle Optic 1x Red Dot - 2 MOA Dot, a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
The maker's newest document; four sellers give 220 g, kept beside it.
manual and bcm differ by 0.99 oz beyond what each states it is good to.
manual and mhs differ by 0.99 oz beyond what each states it is good to.
manual and otrade differ by 0.99 oz beyond what each states it is good to.
manual and sportsmans differ by 1.03 oz beyond what each states it is good to.
Clear aperture0.906 in 23 mmConfirmedPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Clear aperture 23 mm / 0.9 in” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Draws the lens at both ends. The sheet: "Both the front and rear lenses are recessed within the sight body": they are drawn at the end faces.
Main tube diameter (what the ring clamps)1.181 in 30 mmConfirmedPublished: Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026
Published “Sight 30 mm diameter tube” used
Aimpoint, PRO user manual ([13648-4], 2013, 2021), the PDF as T.REX ARMS hosts it: 1.1 Technical specification, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Published “Ring diameter 30mm”
Aimpoint, Patrol Rifle Optic (PRO) technical specifications (M01224, 2011), the PDF as Mod Armory hosts it, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
The newest; the 2011 sheet gives the same.
Inside the ring in every view: it sizes the ring's bore and the tube between the ring and the main body.
Eye reliefNo value yetMissingNo source yet
None to state: the manual says "Eye relief Unlimited" and the 2011 sheet "Eye relief Unlimited". A red dot: the part states no eye point.
The QRP2 mount's length along the rail (its body, the spacer and the ring base's foot are as long)2.771 in ± 0.02 in 70.4 mmCorroboratedPhoto: Primary Arms 12841_01: a photograph of a unit, straight left side on white, both covers closed
Photo 2.771 in ± 0.02 in used
Primary Arms 12841_01: a photograph of a unit, straight left side on white, both covers closed, harvested
Scale: scale from aimpoint-pro.length = 5.35433 in (x-extent 1565 px → 292.3 px/in). Read by median row width in y [0.68, 0.95] (2.761–2.771) of the traced outline (tools/trace.py); the QRP2's body under the spacer, front face to rear face, the median over its rows (the knob's block is narrower and in the middle)
Published “Length 70 mm(2.8″)”
Kenzie's Optics, Aimpoint QRP2 Mount (12195), Specifications: the QRP2 sold alone, in the form of Aimpoint's own tables (its 30 mm axis without a spacer is the PRO manual's), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
The QRP2 sold alone (12195): the same mount. 70.4 mm as read on the photograph.
The reading every outline of the part is scaled by; the QRP2's own table (as Kenzie's Optics gives it) agrees within its last digit, which corroborates it (the detail pass, 2026-10-19).
The sight's length over its lens covers' rings, covers raised (as the profiles have it)5.142 in ± 0.039 in 130.6 mmProvisionalPhoto: Aimpoint's 12841_PRO_Profile_Left as City Arsenal hosts it: straight left side, transparent ground, both covers raised
Photo 5.142 in ± 0.039 in used
Aimpoint's 12841_PRO_Profile_Left as City Arsenal hosts it: straight left side, transparent ground, both covers raised, harvested
Scale: scale from aimpoint-pro.mount_length = 2.771 in (median width over 0.725–0.785 of the height from the top, 777–778 px 777 px → 280.4 px/in). Read by width of the traced outline (tools/trace.py); the outline's length with the raised lids and their hinges cut away: the front cover ring's end to the rear one's
Optical axis above the torque knob's lowest edge2.28 in ± 0.02 in 57.9 mmProvisionalPhoto: Aimpoint's 12841_PRO_Profile_Left as City Arsenal hosts it: straight left side, transparent ground, both covers raised
Photo 2.28 in ± 0.02 in used
Aimpoint's 12841_PRO_Profile_Left as City Arsenal hosts it: straight left side, transparent ground, both covers raised, harvested
Scale: scale from aimpoint-pro.mount_length = 2.771 in (median width over 0.725–0.785 of the height from the top, 777–778 px 777 px → 280.4 px/in). Read by centre between the top (max over 0.0 in windows) along x [2.92, 2.99] of the traced outline (tools/trace.py); the front cover ring's rounded end is round about the axis: the middle of its top and bottom edges over its last 0.07 in, above the knob's lowest edge
The clamp's jaws' bottom (the knob's block) above the torque knob's lowest edge0.41 in ± 0.012 in 10.4 mmProvisionalPhoto: Aimpoint's 12841_PRO_Profile_Left as City Arsenal hosts it: straight left side, transparent ground, both covers raised
Photo 0.41 in ± 0.012 in used
Aimpoint's 12841_PRO_Profile_Left as City Arsenal hosts it: straight left side, transparent ground, both covers raised, harvested
Scale: scale from aimpoint-pro.mount_length = 2.771 in (median width over 0.725–0.785 of the height from the top, 777–778 px 777 px → 280.4 px/in). Read by y_min in x [0.53, 0.58] of the traced outline (tools/trace.py); the lowest edge of the block the knob stands in (the clamp's jaw), just ahead of the knob
The rear cover ring's underside above the torque knob's lowest edge1.594 in ± 0.015 in 40.5 mmProvisionalPhoto: Aimpoint's 12841_PRO_Profile_Left as City Arsenal hosts it: straight left side, transparent ground, both covers raised
Photo 1.594 in ± 0.015 in used
Aimpoint's 12841_PRO_Profile_Left as City Arsenal hosts it: straight left side, transparent ground, both covers raised, harvested
Scale: scale from aimpoint-pro.mount_length = 2.771 in (median width over 0.725–0.785 of the height from the top, 777–778 px 777 px → 280.4 px/in). Read by y_min in x [-2.05, -1.8] in y [0.6, 3.0] of the traced outline (tools/trace.py); the rear cover ring's underside, above the knob's lowest edge
The rear cover ring's diameter (twice its underside below the axis): the main body's round, as drawn1.372 in ± 0.03 in 34.8 mmProvisionalWorked out: 2 * ({.axis_above_knob_bottom} - {.rear_ring_bottom_above_knob_bottom})
Worked out 1.372 in ± 0.03 in used
2 * ({.axis_above_knob_bottom} - {.rear_ring_bottom_above_knob_bottom}), harvested
The rear cover ring and the narrowing of the body ahead of it are turned from the outline's underside; the main body ahead of that is wider, round about the axis at the depth of its own lower edge in the profile (the body feature's box). The maker's 49 mm of sight height, from the body's underside to the top of the battery housing, reads 48.1 mm as drawn.
The torque knob's lowest edge in the optic frame (y, the rail's top is 0)-0.745 in ± 0.03 in -18.9 mmProvisionalWorked out: {.optical_axis_above_rail} - {.axis_above_knob_bottom}
Worked out -0.7446 in ± 0.03 in used
{.optical_axis_above_rail} - {.axis_above_knob_bottom}, harvested
Where the side profile's origin (the knob's lowest edge) sits in the part frame: the axis is the manual's 39 mm over the rail.
How far the QRP2's jaws reach below the rail's top0.335 in ± 0.03 in 8.5 mmProvisionalWorked out: {.axis_above_knob_bottom} - {.jaw_bottom_above_knob_bottom} - {.optical_axis_above_rail}
Worked out 0.3346 in ± 0.03 in used
{.axis_above_knob_bottom} - {.jaw_bottom_above_knob_bottom} - {.optical_axis_above_rail}, harvested
Nothing in a side view shows the rail's top inside the QRP2: it is where the manual's 39 mm puts it under the axis. Primary Arms' photograph, at its own scale, has its jaws 47.3 mm under the axis as Aimpoint's profile does (47.3 mm): the two photographs agree.
The battery housing's diameter (its knurled front cap, on the right shoulder)0.717 in ± 0.05 in 18.2 mmProvisionalPhoto: Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised
Photo 0.717 in ± 0.05 in used
Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised, harvested
Scale: the mount's length, mount_length (2.771 in), is 785 px in this photo (columns 275 to 1060): 283.3 px/in. Read by the knurled front cap of the battery housing at column 760: its top edge at row 512 to its lower edge where it meets the windage cap's boss at about row 715: 203 px; read by eye on a brightened crop, hence the ±
Only the right profile sees the housing whole: in the left one its lower part is behind the body. Placed by the maker's sight width (its right side at 49 mm from the body's left flank) and by the left profile's top of the housing (the outline's top).
Windage cap's diameter (on the right side, under the battery housing)0.805 in ± 0.03 in 20.4 mmProvisionalPhoto: Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised
Photo 0.805 in ± 0.03 in used
Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised, harvested
Scale: the mount's length, mount_length (2.771 in), is 785 px in this photo (columns 275 to 1060): 283.3 px/in. Read by the cap is a circle face on in this view: columns 372 to 600, rows 745 to 975: 228 px
Windage cap's centre behind the mount's middle0.639 in ± 0.03 in 16.2 mmProvisionalPhoto: Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised
Photo 0.639 in ± 0.03 in used
Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised, harvested
Scale: the mount's length, mount_length (2.771 in), is 785 px in this photo (columns 275 to 1060): 283.3 px/in. Read by the cap's centre, column 486, behind the mount's middle, column 667: 181 px (the left profile's elevation cap is centred 0.556 in behind the mount's middle)
Windage cap's centre below the optical axis0.08 in ± 0.03 in 2 mmProvisionalPhoto: Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised
Photo 0.08 in ± 0.03 in used
Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised, harvested
Scale: the mount's length, mount_length (2.771 in), is 785 px in this photo (columns 275 to 1060): 283.3 px/in. Read by the cap's centre, row 860; the axis placed from the fixed jaw's lowest edge, row 1364, by the left profile's 1.870 in between the jaws' bottom and the axis: row 837. 23 px
The mount's width across the rail (the QRP2, the spacer and the ring base's foot)1.1 in ± 0.15 in 27.9 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view from the front, the rear or above is on file, and no page gives the mount's width. Taken as the quarter views show it, a little narrower than the main body.
Worked out 1.1 in ± 0.15 in used
An assumption for the drawing, not a reading: no view from the front, the rear or above is on file, and no page gives the mount's width. Taken as the quarter views show it, a little narrower than the main body., harvested
The QRP2's width as sold alone (12195): its torque knob's face to the outer face of its fixed (right) jaw2.165 in 55 mmProvisionalPublished: Kenzie's Optics, Aimpoint QRP2 Mount (12195), Specifications: the QRP2 sold alone, in the form of Aimpoint's own tables (its 30 mm axis without a spacer is the PRO manual's), a seller, read Oct 19, 2026
Published “Width 55 mm(2.2″)” used
Kenzie's Optics, Aimpoint QRP2 Mount (12195), Specifications: the QRP2 sold alone, in the form of Aimpoint's own tables (its 30 mm axis without a spacer is the PRO manual's), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
A mount's "Width" whose torque knob stands out of its left side: taken to span the knob's face to the far jaw, as the configuration's 70 mm spans the knob's face to the sight's right side (the furthest things out each side, the same knob in both). Kenzie's Optics gives it in Aimpoint's form; aimpoint.com, where the table is from, refuses the reader. With the drawing's knob face (knob_face_z, by the 70 mm) the model's QRP2 was 54.0 mm across (2026-10-19, before the detail pass).
How far the QRP2's right (fixed) jaw's outer face stands inboard of the sight's right side0.591 in ± 0.03 in 15 mmProvisionalWorked out: {.width} - {.qrp2_width}
Worked out 0.5906 in ± 0.03 in used
{.width} - {.qrp2_width}, harvested
70 mm less 55 mm. The ± is the two figures' last digits.
What Aimpoint's two widths leave between them, the configuration's 70 mm (the knob's face to the sight's right side) less the QRP2's 55 mm (the knob's face to its right jaw), the same knob face at one end of both: 15 mm. The model's QRP2 right face is that far in from the sight's right side, which the maker's 49 mm of sight width places (right_z in the manifest): 0.59 in from the rail's middle, where the assumed mount_width had 0.55. Primary Arms' photograph from ahead and to the right (e97955bbce77) shows the QRP2's top as a strip beyond the spacer's right face (the QRP2 the wider), as this has it; a camera fitted to that photo didn't settle (see the part's gaps), so the photo isn't the reading.
The QRP2's right jaw's lowest edge below the middle of the spacer's row of holes0.729 in ± 0.015 in 18.5 mmProvisionalPhoto: Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised
Photo 0.729 in ± 0.015 in used
Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised, harvested
Scale: the mount's length, mount_length (2.771 in), is 785 px in this photo (columns 275 to 1060): 283.3 px/in. Read by the holes' row: each hole from row 1133-1134 (its top rim) to 1178-1179 (its bottom), their middle row 1156.0 (the eight agree to a pixel); the mount's lowest edge, the alpha silhouette's last opaque row at every 20th column from 280 to 1040: 1360 to 1364, level within 3 px, median 1362.5: 206.5 px. The ± covers 2 px each end and the scale.
Read on the one straight view of the right side, where the jaw and the holes are on the near side together (Aimpoint's profiles look taken from a little above: each near face is read against its own near face). The left profile's strip under the left wall (the trace's lip, 0.558 in under its holes) is the far, right jaw's lower edge seen from about 9 degrees above (0.729 less 0.558 over the 1.05 in across the mount), not a lip of the left wall: the front end face in Primary Arms' photograph from ahead and to the right (e97955bbce77) has the left side end at the channel's roof with no lip under it, and Optics Trade's photograph of the QRP2 alone from its channel side (1dbb191bfb52) has the left side's edge plain along both ends, a hook only on the movable jaw at its middle. The movable jaw (the knob's block) reaches 0.740 in under its holes in the left profile (rows 1091.5 to 1299 at 280.4 px/in), as traced (the jaw feature).
How far the ring's flats (where its two screws go down) stand out past its round0.24 in ± 0.05 in 6.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the quarter views show the top ring's two flats beside its round, a little more than a screw head wide (the heads read 0.21 in across in the left profile, the ring_screws feature); no view along the sight is on file.
Worked out 0.24 in ± 0.05 in used
An assumption for the drawing, not a reading: the quarter views show the top ring's two flats beside its round, a little more than a screw head wide (the heads read 0.21 in across in the left profile, the ring_screws feature); no view along the sight is on file., harvested
The lens covers' lids' thickness0.12 in ± 0.04 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: both lids are seen at a slant in the side views, so their thickness isn't read.
Worked out 0.12 in ± 0.04 in used
An assumption for the drawing, not a reading: both lids are seen at a slant in the side views, so their thickness isn't read., harvested
The rotary switch's knurled ring at the battery housing's rear end, its length along the sight0.494 in ± 0.03 in 12.5 mmProvisionalPhoto: Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised
Photo 0.494 in ± 0.03 in used
Aimpoint's 12841_PRO_Profile_Right as City Arsenal hosts it: straight right side, transparent ground, both covers raised, harvested
Scale: the mount's length, mount_length (2.771 in), is 785 px in this photo (columns 275 to 1060): 283.3 px/in. Read by the knurled ring with its set screw at the housing's rear end, columns 120 to 260: 140 px (in the left profile it is behind the rear lid's hinge)
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Sight and magnifier
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Sportsman's Warehouse $512.00 Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $512.00 Nov 21, 2026, out of stock that day
- BCM $512.00 Nov 21, 2026, out of stock that day
- Primary Arms $512.00 Nov 21, 2026, out of stock that day
- Impact Guns $512.49 Nov 21, 2026, out of stock that day