Handguard
Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2
Aero Precision's 15 in Enhanced free-float M-LOK handguard, second generation: "Machined from 6061-T6 aluminum", a "Continuous top rail" with "Scalloped rails", "Quick disconnect sling socket at the 3, 6 and 9 o'clock positions", held by eight screws to Aero's BAR interface. "Our handguards use the BAR interface and do not work with a standard barrel nut. If you are using our M4E1 Enhanced Upper Receiver, no additional pieces are needed." Sold alone (APRA100218C) for that upper, and with the BAR barrel nut (APRA100218A) for "a standard threaded upper receiver". "This handguard is specific to the AR15/M4E1 platform. It is not compatible with the M5 .308/M5E1 platform."

- Weight
- 13.44 oz ± 0.06 oz Confirmedworked out: {.weight} + {.bar_nut_weight}
- Lowest price
- $180.00 at Aero Precision, read Nov 21, 2026 (Anodized Black, On the M4E1 Enhanced upper (no nut))
- Maker's number
- APRA100218A
- Colours
- Anodized Black, FDE Cerakote, OD Green Anodized, Kodiak Brown Anodized
- Drawn as
- modelled
- Maker's page
- aeroprecisionusa.com
In “Aero M4E1 Enhanced, pencil barrel”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Weight (the handguard, as Aero states it for the 15 in)11.2 oz ± 0.05 ozConfirmedPublished: Aero Precision, AR15 Enhanced M-LOK Handguards, Gen 2 (every length and finish), Specifications, the maker, read Oct 12, 2026
Published “Weight(s) 7" - 5.6oz, 9" - 7.2oz, 12" - 9.6oz, 15" - 11.2oz” used
Aero Precision, AR15 Enhanced M-LOK Handguards, Gen 2 (every length and finish), Specifications, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Weight : 7-Inch: 5.6 oz. 9-Inch: 7.2 oz. 12-Inch: 9.6 oz. 15-Inch: 11.2 oz.”
Wing Tactical, Aero Precision AR-15 Enhanced M-LOK Rail (the 7, 9, 12 and 15 in with the barrel nut), Specifications, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
The seller of the one with the nut, its screws and its shims in the box states the same figure.
Published “Weight 11.2 oz”
AR15Discounts, APRA100218C - Aero Precision Enhanced M-LOK AR-15 Handguard Gen 2 Black - 15", Additional information, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
The seller of the handguard alone; beside it "Dimensions 20.5 × 3 × 3 in", a carton's.
The maker's own figure; both sellers repeat it.
Aero's one figure for the 15 in, under a list for the four lengths; no page says whether the BAR barrel nut, the eight screws or the shims are in it. The same figure stands on the page of the handguard alone's sellers and on the page of the one sold with the nut, so it is taken as the handguard's own; the model as 6061 aluminium is the check (app/tests/aero-enhanced-15-handguard.test.ts).
Weight of the BAR barrel nut (APRH100268), which the one sold for a standard upper comes with2.24 oz ± 0.005 ozConfirmedPublished: Aero Precision, AR15 BAR Barrel Nut (APRH100268), Specifications, the maker, read Oct 12, 2026
Published “Weight(s) 2.24 oz” used
Aero Precision, AR15 BAR Barrel Nut (APRH100268), Specifications, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
"Material: Machined from Billet 7075-T6 Aluminum"; "Includes: BAR Barrel Nut / BAR Shim Pack (8 shims)".
Length as Aero measures it: from where it meets the receiver to the end of its rail's teeth14.94 in ± 0.005 in 379.5 mmConfirmedPublished: Aero Precision, AR15 Enhanced M-LOK Handguards, Gen 2 (every length and finish), Specifications, the maker, read Oct 12, 2026
Published “Actual Handguard Lengths 7" - 7.25", 9" - 9.22", 12" - 12.63", 15" - 14.94"” used
Aero Precision, AR15 Enhanced M-LOK Handguards, Gen 2 (every length and finish), Specifications, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Photo 14.97 in ± 0.05 in
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): its 37 rail slots on the Picatinny pitch, 106.58 px/in in the rail's plane. Read by the last tooth's front edge (column 1775.5: 15.083 in ahead of the tube's rear face) less where the rail's neck begins (column 171: 0.110)
The maker's figure, to two places; the photo's reading of what Aero says it measures agrees within 0.03 in.
Aero: "Aero Precision rail lengths measure from end to end. This is the point of contact at the receiver to the end of the last picatinny slot at the muzzle." The point of contact is the rear end of its rail, which meets the receiver's rail; the tube's own rear face reaches a tenth of an inch further back, round the receiver's front (rail_rear_from_rear). On the side photo the last tooth's front stands 14.97 in ahead of that point, and the rail's floor runs on 0.06 in past it to the front end (overall_length).
Overall length, from the tube's rear face to the front end15.14 in ± 0.05 in 384.6 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 15.14 in ± 0.05 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): the side flat's own plane, its seven M-LOK slots on the M-LOK pitch (109.15 px/in). Read by the side flat's rear edge to its front edge at the M-LOK row, columns 142 to 1797 (1656 px, 15.17 in), and the rail's own nose at the rail's scale (column 1786: 15.13 in from the rear face): the middle; ± covers both and two pixels
A tenth of an inch of tube behind the point Aero measures from, and 0.06 in of the rail's floor ahead of the last tooth. Aero's later list of handguard lengths (handguard_length_tech_manual_2022.pdf, page 4) names this one 15".
Width across the side flats1.92 in ± 0.005 in 48.8 mmProvisionalPublished: Wing Tactical, Aero Precision AR-15 Enhanced M-LOK Rail (the 7, 9, 12 and 15 in with the barrel nut), Specifications, a seller, read Oct 12, 2026
Published “Outside Diameter : Width - 1.92", Height - 2.18"” used
Wing Tactical, Aero Precision AR-15 Enhanced M-LOK Rail (the 7, 9, 12 and 15 in with the barrel nut), Specifications, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
A seller's table, with no word of where it comes from; the maker gives no outside size. Across its two side flats (the M-LOK faces at 3 and 9 o'clock), by Wing's own view down its length: the BAR nut's rim in the rear face's plane reads about 382 px (by eye, on a crop enlarged 2.5 times) to the face's 412, which with the published 1.78 in nut cut is 1.92.
Height, from the rail's top to the bottom flat2.18 in ± 0.005 in 55.4 mmProvisionalPublished: Wing Tactical, Aero Precision AR-15 Enhanced M-LOK Rail (the 7, 9, 12 and 15 in with the barrel nut), Specifications, a seller, read Oct 12, 2026
Published “Outside Diameter : Width - 1.92", Height - 2.18"” used
Wing Tactical, Aero Precision AR-15 Enhanced M-LOK Rail (the 7, 9, 12 and 15 in with the barrel nut), Specifications, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
A seller's table (as the width). What it spans: the rail's top to the flat at 6 o'clock. With the rail level with the receiver's (rail_top_above_bore, 1.2125 above the bore) it puts the bottom flat 0.9675 below the bore, and half the width is 0.96: the body is as far below the bore as it is wide to each side. The side photo's rail top, M-LOK row and bottom edge land on it with the lens 9 degrees above level (the file's header).
Inside diameter, from the barrel nut cut to the front end1.72 in ± 0.005 in 43.7 mmConflictPublished: Aero Precision, AR15 Enhanced M-LOK Handguards, Gen 2 (every length and finish), Features, the maker, read Oct 12, 2026
Published “1.72" inside diameter (from barrel nut cut to forward end) fits most muzzle devices and 1.5" suppressors” used
Aero Precision, AR15 Enhanced M-LOK Handguards, Gen 2 (every length and finish), Features, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Inside Diameter : 1.72"”
Wing Tactical, Aero Precision AR-15 Enhanced M-LOK Rail (the 7, 9, 12 and 15 in with the barrel nut), Specifications, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “1.78" inside diameter fits most muzzle devices and 1.5" suppressors”
Aero Precision, AR15 15" Enhanced M-LOK Handguard, Gen 2 - Anodized Black (APRA100218C), Features, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
The 15 in's own page gives one inside diameter, and it is the figure the page of all lengths gives for the barrel nut cut.
Aero's page of every length tells the two apart (1.72 ahead of the barrel nut cut, 1.78 in it), its 2022 list of lengths says "The 1.72\" ID of the Enhanced Handguard", and a seller's table has 1.72; the 15 in's own page has the nut cut's figure in the sentence about muzzle devices.
aero and aero-15-page differ by 0.06 in beyond what each states it is good to.
wing-tactical and aero-15-page differ by 0.06 in beyond what each states it is good to.
Across the inside of the two side flats: the muzzle end's photos show flat inner walls that follow the outside, a tenth of an inch in (the width less this, halved).
Inside diameter at the rear, where the BAR barrel nut (or the Enhanced upper's platform) goes1.78 in ± 0.005 in 45.2 mmConfirmedPublished: Aero Precision, AR15 Enhanced M-LOK Handguards, Gen 2 (every length and finish), Features, the maker, read Oct 12, 2026
Published “1.78" inside barrel nut cut area diameter” used
Aero Precision, AR15 Enhanced M-LOK Handguards, Gen 2 (every length and finish), Features, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
How far in from the rear face the barrel nut cut runs1.6 in ± 0.2 in 40.6 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 1.6 in ± 0.2 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header). Read by bounded, not read: between screw_hole0_from_rear + screw_hole_spacing + half the countersink's rim, and vent_slot0_from_rear less half a slot's length
No page gives it. It ends ahead of the front screw hole's rim (1.37 in from the rear face) and behind the rear ends of the first slots through its walls (1.81 in): the middle of the two, with half the room either way. It shows only from the rear end, which stands against the receiver.
The tube's rear face ahead of the receiver's front face (negative: behind it, round the receiver's front)-0.555 in ± 0.03 in -14.1 mmCorroboratedWorked out: -{std.ar15.upper_barrel_thread_length} - {.rail_rear_from_rear}
Worked out -0.555 in ± 0.03 in used
-{std.ar15.upper_barrel_thread_length} - {.rail_rear_from_rear}, harvested
Where it meets the receiver is the rear end of its rail, and that stands at the receiver body's front shoulder, the foot of the barrel-nut thread: Aero's manual for the BAR nut (bar-barrel-nut-instructions.pdf, step 10: "Install your handguard and you are now done.") photographs one on a standard upper with its rail carrying on from the receiver's, and the Army's drawing puts that shoulder .445 behind the thread's end, where the app's handguards are placed from. The tube's rear face is a tenth of an inch further back (rail_rear_from_rear). Two things say that the rail's rear end, not the tube's, is at the shoulder: so placed, its first rail slot stands 0.524 in ahead of the shoulder, where the M4E1 Enhanced receiver's own row of slots comes to at the standard's pitch (0.497: aero-m4e1-enhanced-upper.rail_slot0_x and fifteen pitches); and its screw holes stand 0.71 and 1.12 ahead of it, where that receiver's platform has its own (0.74 and 1.15 by its own photo). The shims between the BAR nut and the shoulder (.002 and .003 in) aren't counted.
Its rail's top above the bore axis1.212 in ± 0.02 in 30.8 mmCorroboratedWorked out: {aero-m4e1-threaded-upper.rail_top_above_pin} - {aero-m4e1-threaded-upper.bore_axis_above_pin}
Worked out 1.2125 in ± 0.02 in used
{aero-m4e1-threaded-upper.rail_top_above_pin} - {aero-m4e1-threaded-upper.bore_axis_above_pin}, harvested
Level with the receiver's rail: Aero's M4E1 uppers have a "Picatinny profile that blends seamlessly with our Enhanced Handguards" (its page for the M4E1 Enhanced upper without a forward assist, APAR612201AC, and its page for the M4E1 Threaded upper names the Enhanced handguards too). So the receiver's rail top above the pin line less the bore's height above it. The seller's height less half the seller's width is 1.22.
The side flat (the M-LOK face at 3 and 9 o'clock), from its lower edge to its upper0.93 in ± 0.03 in 23.6 mmCorroboratedPhoto: Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280
Photo 0.93 in ± 0.03 in used
Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280, harvested
Scale: REAR (the file's header): 214.6 px/in across, 0.883 of it up and down. Read by the rear face's left and right edges stand upright (within 5 px) from row 908 to row 1084: 176 px
Photo 0.95 in ± 0.03 in
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): 109.15 px/in on the side flat, heights over 0.988. Read by the flat's even tone between the two inner rows of slots, rows 655 to 759 (104 px), about the M-LOK row at 709
The view that shows the flat's two ends as corners of the outline; the side view, where they are the edges of two rows of slots, agrees within 0.02 in.
Across the two ridges between the faces above (and below) a side flat: each side has a steep face and a shallow one1.44 in ± 0.04 in 36.6 mmProvisionalPhoto: Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280
Photo 1.44 in ± 0.04 in used
Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280, harvested
Scale: REAR (the file's header): 214.6 px/in across. Read by where the outline's slope changes on the lower left (from 1.33 down per px across to 0.44): column 498, 154 px from the nut's centre line (652), doubled
Between a side flat and the flat at the bottom the outline isn't one face: it leaves the chord between their ends by 22 px (0.10 in) at its middle, as two faces with a ridge between (the muzzle end's photos show the two apart, each with its own row of slots). The ridge lies at 47 degrees about the bore: the eight screws, which go in along the BAR nut's 45 degree holes, are countersunk on it.
Those ridges above (and below) the bore's level0.79 in ± 0.04 in 20.1 mmProvisionalPhoto: Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280
Photo 0.79 in ± 0.04 in used
Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280, harvested
Scale: REAR (the file's header): 214.6 px/in across, 0.883 of it up and down; the bottom flat (row 1188) at height less rail_top_above_bore below the bore. Read by the lower left ridge at row 1157, 31 px above the bottom flat's row: 0.164 in above the flat, which is 0.9675 below the bore (0.80); from the nut's centre row (1010) the same point reads 0.776: the middle
The side view agrees: the ridge would stand at row 621 above the M-LOK row and 787 below it, between the two rows of slots each side (bars at 626 to 634 and 774 to 786), where the upper screw holes' rims begin (623).
The flat at 6 o'clock, across (and the shelf each side of the rail's neck ends as far out)0.88 in ± 0.04 in 22.4 mmProvisionalPhoto: Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280
Photo 0.88 in ± 0.04 in used
Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280, harvested
Scale: REAR (the file's header): 214.6 px/in across. Read by the bottom edge lies level (rows 1186 to 1188) from column 556 to 745: 189 px
The top shelf's outer end is the same distance from the middle on the side view (its edge at row 598 is 0.954 above the bore at 0.44 out).
The rail's neck, across its two walls0.67 in ± 0.03 in 17 mmProvisionalPhoto: Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280
Photo 0.67 in ± 0.03 in used
Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280, harvested
Scale: the rail's own head at its rear end, 172 px across for the standard's 0.835 in (std.picatinny.top_width): 206 px/in there. Read by the two walls' outer faces under the head, 138 px apart
The channel under the rail (the gas tube's), across0.5 in ± 0.03 in 12.7 mmProvisionalPhoto: Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280
Photo 0.5 in ± 0.03 in used
Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280, harvested
Scale: the rail's own head at its rear end, 172 px across for the standard's 0.835 in (std.picatinny.top_width): 206 px/in there. Read by the dark opening between the neck's walls, columns 598 to 701: 103 px
That channel's roof below the rail's top0.165 in ± 0.02 in 4.2 mmProvisionalPhoto: Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280
Photo 0.165 in ± 0.02 in used
Wing Tactical: a long one from its rear end, the BAR nut in it, 1280 x 1280, harvested
Scale: the rail's own head at its rear end (206 px/in), 0.883 of it up and down. Read by the head's rear end face, from its top edge (row 788) to the channel's roof (818): 30 px
How many rail slots (each between two teeth)37CorroboratedPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 37 count used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header). Read by counted along the top edge: the runs where the silhouette's top is at the slots' floor, between the shelf behind the first tooth and the open floor ahead of the last (side_pure.py: 39 runs, the first and the last being those two)
Photo 37 count
Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630, harvested
Scale: none: a count. Read by counted again along the top edge of Aero's own level photo of the Kodiak Brown one: 39 runs, the first and the last being the shelf and the open floor
The larger photo; Aero's own counts the same.
38 teeth; ahead of the last the rail's floor runs out open to the front end.
The rearmost rail slot's centre ahead of the rear face0.634 in ± 0.03 in 16.1 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.634 in ± 0.03 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): the 37 slots' centres fit the pitch from column 235.5 (41.96 px a pitch, 106.58 px/in); the rear face from its near edge on the side flat, column 142, 0.96 in nearer the lens. Read by X of column 235.5 at the rail's depth; ± is the lens's place along the photo (150 px) and the rear edge (2 px)
The rail's rear end (its neck's: where it meets the receiver) ahead of the tube's rear face0.11 in ± 0.03 in 2.8 mmCorroboratedPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.11 in ± 0.03 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header). Read by the silhouette's rear end at the neck's rows (582 to 594), column 171, at the neck's depth, against the side flat's rear edge (142) at its own; what the lens's place alone would put between them is 15 px, and there are 29
Photo 0.17 in ± 0.04 in
Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630, harvested
Scale: its own top rail: 37 slot centres on the Picatinny pitch from column 87 to 931, 23.44 px a pitch, 59.55 px/in; the lens stood near its rear third (its slots read widest there), so little is to be taken off at the rear end for where it stood. Read by the silhouette's rear end at the rail's floor and neck (rows 253 to 261: column 57) against the tube's rear edge (column 46): 11 px, 0.185 in, less up to 0.03 for the lens standing a few inches ahead of that end
Decided by what it has to fit: with 0.11 its screw holes stand 0.71 and 1.12 in ahead of where it meets the receiver, and the M4E1 Enhanced receiver's platform has its own 0.72 to 0.75 and 1.12 to 1.16 ahead of its shoulder by its own photo; with 0.17 they would stand 0.06 short. The two readings are inside each other's ±.
The tube's rear end stands this far back round the receiver's front, with a notch under the rail for the receiver's own rail. Behind the first tooth the rail runs back at its slots' floor to here. What the two photos agree on to a hundredth is the rail itself, from this end: 0.50 and 0.52 in to its first slot's centre, 14.97 to its last tooth's front; how far the tube reaches behind it they read 0.06 in apart, each across two planes.
A window through the rail (every other lug is cut through into the channel under it), along the rail0.54 in ± 0.03 in 13.7 mmProvisionalPhoto: Wing Tactical: a 12.63 in one from above, from its left and from below, 1280 x 1280
Photo 0.54 in ± 0.03 in used
Wing Tactical: a 12.63 in one from above, from its left and from below, 1280 x 1280, harvested
Scale: its own rail across, 76.7 px for the standard's 0.835 in (std.picatinny.top_width): 91.8 px/in. Read by an oblong opening's length, 48 to 50 px, over four of them
Aero's "Scalloped rails". Read on Wing's view from above of a 12.63 in one of the same page (six M-LOK slots a side): the rail's section and its windows are the family's, the count along a 15 in isn't. Which lugs: rail_window0_lug.
That window, across the rail0.36 in ± 0.03 in 9.1 mmProvisionalPhoto: Wing Tactical: a 12.63 in one from above, from its left and from below, 1280 x 1280
Photo 0.36 in ± 0.03 in used
Wing Tactical: a 12.63 in one from above, from its left and from below, 1280 x 1280, harvested
Scale: its own rail across, 76.7 px for the standard's 0.835 in (std.picatinny.top_width): 91.8 px/in. Read by an opening's width, 33 px
The first lug that has a window through it, counted from the rear5ProvisionalPhoto: Wing Tactical: a 12.63 in one from above, from its left and from below, 1280 x 1280
Photo 5 count used
Wing Tactical: a 12.63 in one from above, from its left and from below, 1280 x 1280, harvested
Scale: none: a count. Read by the lugs from the rear end: whole, whole, pocket, whole, window, whole, window, ...
On the 12.63 in one from above: the first two lugs are whole, the third has a blind pocket (over the barrel nut), the fourth is whole, and from the fifth every other lug is cut through. The rear end is the same on every length (one nut, one hole pattern); the 15 in's own three-quarter views (23c31a17f084, 5a1039ef4a84) show its lugs cut and whole by turns to the muzzle.
How many lugs of the 15 in's 38 are cut through17ProvisionalWorked out: ({.rail_slots} - {.rail_window0_lug}) / 2 + 1
Worked out 17 count used
({.rail_slots} - {.rail_window0_lug}) / 2 + 1, harvested
Worked out, not counted on a view from above of a 15 in (none is on file): every other lug from the fifth to the thirty-seventh.
How many M-LOK slots in each side flat7ProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 7 count used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header). Read by counted along row 709: seven dark runs 135 to 138 px long (1.24 to 1.26 in: the standard's 32 mm), 171.9 px apart; behind them the sling socket's hole
The rearmost side M-LOK slot's centre ahead of the rear face4.727 in ± 0.02 in 120.1 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 4.727 in ± 0.02 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): the side flat's own plane, 109.15 px/in by the slots' own pitch. Read by the first slot's centre (column 658.0; the six fit 658.0 + 171.9 k within 1 px) from the flat's rear edge (142), both on the flat
How many M-LOK slots along the bottom flat7ProvisionalWorked out: {.mlok_slots}
Worked out 7 count used
{.mlok_slots}, harvested
Not seen on a 15 in: no view of its underside is on file. Wing's page says "M-LOK slots at 3, 6, and 9 o'clock positions", and its view from below of a 12.63 in one has along the bottom as many slots as that one has in a side (six), at the sides' stations, with the 6 o'clock socket where the sides' are. Taken so for the 15 in: its sides' own count, from the sides' first station. Where a grip or a hand stop really bolts under it may differ by a slot.
The room inside its faces, from a face in to the barrel (what an M-LOK accessory's nuts may take)No value yetMissingNo source yet
Not sourced: it depends on the barrel and gas block under it, other parts. Its wall is 0.1 in by the two published figures (1.92 wide, 1.72 inside).
How many slots in each row of the faces between14ProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 14 count used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header). Read by counted along the upper steep face's row (row 650: thirteen dark runs, and a fourteenth at columns 1690 to 1783, seen through to the far side, which ends a tenth of an inch short of the front end) and along the row above it (row 608, the same stations); the two rows below the side flat stand at the same stations (rows 789 and 764)
The rearmost of those slots, its centre ahead of the rear face2.22 in ± 0.02 in 56.4 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 2.22 in ± 0.02 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header). Read by the first slot's centre in the steep face's row (column 387.5 at 0.86 in toward the lens: 2.230) and in the shallow face's (391.5 at 0.58: 2.212)
Those slots' pitch along the handguard0.953 in ± 0.004 in 24.2 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.953 in ± 0.004 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): 108.86 px/in at the steep face's row, 108.11 at the shallow's. Read by thirteen centres in the steep row (387.5 to 1633, 103.8 px a pitch: 0.9535) and eleven in the shallow (391.5 to 1421.5, 103.0: 0.9527)
Not a round figure in either system: 24 mm would be 0.945, and over the twelve pitches read it would stand 11 px short.
Those slots' length0.82 in ± 0.02 in 20.8 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.82 in ± 0.02 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): 108.86 px/in at the steep face's row. Read by the dark runs near the lens's axis, where a slot is looked into square on: 86 to 91 px (further back its rear wall is lit and it reads short, 76 px)
Those slots' width across their face0.2 in ± 0.03 in 5.1 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.2 in ± 0.03 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): 108.4 px/in, each face seen at its own angle to the lens. Read by the steep face's row is 18 px high (rows 636 to 654) on a face whose normal is 28 degrees off the line of sight: 0.19; the shallow's is 15 px (605 to 620) at 47 degrees: 0.20
The steep face's row of slots, its middle up the face from the side flat's edge0.14 in ± 0.03 in 3.6 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.14 in ± 0.03 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): 108.4 px/in, the face 28 degrees off the line of sight. Read by the row's dark band runs from a pixel above the flat's edge (655) to row 636: its middle 10 px up, 0.105 in, and half its lit lower wall
The shallow face's row of slots, its middle from the ridge toward the rail (or the bottom flat)0.17 in ± 0.03 in 4.3 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.17 in ± 0.03 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): 108.1 px/in, the face 47 degrees off the line of sight. Read by the row's band, rows 605 to 620, is centred between the shelf's edge (598) and the ridge (621 to 624): the middle of a face 0.34 in wide
How many screws hold it to the nut or the platform8ConfirmedPublished: Aero Precision, Handguard Lengths (handguard_length_tech_manual_2022.pdf), page 4, Enhanced, the maker, read Oct 12, 2026
Published “these handguards install effortlessly with the use of eight screws” used
Aero Precision, Handguard Lengths (handguard_length_tech_manual_2022.pdf), page 4, Enhanced, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Wing Tactical's box: "8x Mounting Set Screws". Two holes in each of the four ridges at the rear, by the side photo and the view down its length.
The rear screw holes' centres ahead of the tube's rear face0.824 in ± 0.03 in 20.9 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.824 in ± 0.03 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): at the ridge's depth, 0.72 in toward the lens. Read by the upper rear hole's rim, columns 224 to 252: its middle, 238
The front screw holes ahead of the rear ones0.41 in ± 0.02 in 10.4 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.41 in ± 0.02 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): 108.5 px/in at the ridge. Read by the two upper holes' rims, columns 224 to 252 and 268 to 297: their middles 44.5 px apart (their dark centres, which the light skews, are 48.9 apart)
A screw hole's countersink, across its rim0.27 in ± 0.03 in 6.9 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.27 in ± 0.03 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): 108.5 px/in at the ridge. Read by the two upper holes along the handguard, where a round rim isn't foreshortened: 28 and 30 px
A screw hole, across (the screw's thread)0.14 in ± 0.03 in 3.6 mmProvisionalPhoto: Wing Tactical: the BAR nut, its shims and the eight flat-head screws laid out, 1280 x 1280
Photo 0.14 in ± 0.03 in used
Wing Tactical: the BAR nut, its shims and the eight flat-head screws laid out, 1280 x 1280, harvested
Scale: each screw's own head, taken at screw_countersink_d. Read by a screw's thread is about half its head across, on the four that lie side on
No page names the screw. Read as a share of its head on the seller's photo of the eight laid out, and good to no more than that.
The sling sockets' centres ahead of the rear face (3, 6 and 9 o'clock, at one station)2.863 in ± 0.02 in 72.7 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 2.863 in ± 0.02 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): the side flat's own plane, 109.15 px/in. Read by the right socket's dark hole, centred on column 454.5 and on the M-LOK row
Aero: "Quick disconnect sling socket at the 3, 6 and 9 o'clock positions". The one at 6 o'clock is a steel cup under the bottom edge, with its own figures (socket_cup_from_rear).
A sling socket's hole, across0.36 in ± 0.02 in 9.1 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.36 in ± 0.02 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): the side flat's own plane, 109.15 px/in. Read by the dark hole, 38 to 40 px across and as high
The boss a sling socket stands in, across0.67 in ± 0.05 in 17 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.67 in ± 0.05 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): the side flat's own plane, 109.15 px/in. Read by the lit ring round the right socket's hole, 73 px across
How far a side sling socket's boss stands off its flat0.087 in ± 0.02 in 2.2 mmProvisionalPhoto: Wing Tactical: a 12.63 in one from above, from its left and from below, 1280 x 1280
Photo 0.087 in ± 0.02 in used
Wing Tactical: a 12.63 in one from above, from its left and from below, 1280 x 1280, harvested
Scale: its own rail across, 76.7 px for the standard's 0.835 in (std.picatinny.top_width): 91.8 px/in. Read by the bump at each side of the silhouette at the sockets' station, 8 px proud of the side flat
Read on a 12.63 in one seen from above (the sockets are the family's: Aero's "Quick disconnect sling socket at the 3, 6 and 9 o'clock positions" is said of every length); no view of a 15 in from above is on file.
The sling socket at 6 o'clock: its steel cup, across0.484 in ± 0.03 in 12.3 mmProvisionalPhoto: Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630
Photo 0.484 in ± 0.03 in used
Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630, harvested
Scale: its traced outline (profiles.side), scaled by its length end to end (overall_length): 59.97 px/in. Read by the cup's two ends under the bottom edge, 2.676 and 3.160 in from the rear face
A piece of its own: black under the Kodiak Brown, the OD Green and the FDE handguards in Aero's photos of each, where the two side sockets are the handguard's own metal and colour.
That cup's middle ahead of the tube's rear face2.918 in ± 0.03 in 74.1 mmProvisionalPhoto: Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630
Photo 2.918 in ± 0.03 in used
Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630, harvested
Scale: its traced outline (profiles.side), scaled by its length end to end (overall_length): 59.97 px/in. Read by the middle of the cup's two ends, 2.676 and 3.160
The larger side photo has its middle 2.90 in from the rear face; the side sockets' holes stand at 2.863 (socket_from_rear).
How far that cup stands below the bottom flat0.084 in ± 0.02 in 2.1 mmCorroboratedPhoto: Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630
Photo 0.084 in ± 0.02 in used
Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630, harvested
Scale: its traced outline (profiles.side), scaled by its length end to end (overall_length): 59.97 px/in. Read by the cup's underside 2.268 below the rail's top against the bottom edge's 2.184
Photo 0.055 in ± 0.02 in
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): 107 px/in at the bottom's middle. Read by the cup below the bottom edge, rows 800 to 806, seen from 9 degrees above (the bottom flat's near corner hides some of it)
The level view; from above the bottom's near edge hides part of what stands under its middle.
The bottom flat's rear end ahead of the tube's rear face (its rear end leans forward below the side flats' upper edges)0.235 in ± 0.04 in 6 mmCorroboratedPhoto: Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630
Photo 0.235 in ± 0.04 in used
Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630, harvested
Scale: its own top rail: 37 slot centres on the Picatinny pitch from column 87 to 931, 23.44 px a pitch, 59.55 px/in; the lens stood near its rear third (its slots read widest there), so little is to be taken off at the rear end for where it stood. Read by the silhouette's rear edge at the bottom corner (rows 369 to 373: column 60) against its rear edge above the side flat (rows 265 to 273: column 46): 14 px
Photo 0.29 in ± 0.05 in
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header). Read by the bottom edge reaches its level from column 186 (luminance under 120); a square end at the bottom flat's near corner, 0.44 in out, would show at column 155
Read near its lens's axis, with nothing to take off for where the lens stood; the larger photo's reading, which has 13 px of that taken off, is 0.055 in more, inside the two ±.
The tube's rear end isn't square below the side flats' upper edges. Aero's level photo, taken from near that end, has its edge 0.12 in forward at the side flat's lower edge, 0.15 at the lower ridge and 0.235 at the bottom flat; AR15Discounts' larger one, against where a square end would show from its lens, 0.14, 0.18 and 0.29. The receiver's pivot lug stands under there. Drawn as one plane from the side flats' upper edges to this figure at the bottom flat (up to 0.04 in ahead of the readings between).
The scallops milled along the side flats' two edges: their pitch (not drawn)0.527 in ± 0.003 in 13.4 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.527 in ± 0.003 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): the side flat's own plane, 109.15 px/in. Read by bright ticks along rows 660 to 664 and 744 to 752: twenty of them from column 188 to 1394 at 57.55 px (two not found, at the sling socket and near 1452)
Aero: "Additional milling along flats to aid with gripping and add visual appeal". Small crescent cuts, about a tenth of an inch long, in a row along each edge of a side flat (and of the bottom flat, by Wing's view of a 12.63 in one from below). Read so that a later pass can cut them; the model leaves them out.
The rearmost of those scallops ahead of the tube's rear face (not drawn)0.42 in ± 0.02 in 10.7 mmProvisionalPhoto: AR15Discounts: the 15 in black handguard's right side, 1920 x 1280
Photo 0.42 in ± 0.02 in used
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): the side flat's own plane, 109.15 px/in. Read by the first tick at column 188 (upper edge) and 186 (lower edge), from the flat's rear edge at 142
The bottom flat below the bore axis0.968 in ± 0.02 in 24.6 mmProvisionalWorked out: {.height} - {.rail_top_above_bore}
Worked out 0.9675 in ± 0.02 in used
{.height} - {.rail_top_above_bore}, harvested
The seller's height less the rail's height above the bore; half the seller's width is 0.96.
The tube's top beside the rail's neck (the shelf the neck stands on), below the rail's top0.235 in ± 0.02 in 6 mmCorroboratedPhoto: Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630
Photo 0.235 in ± 0.02 in used
Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630, harvested
Scale: its own top rail: 37 slot centres on the Picatinny pitch, 59.55 px/in; a level view (each row of openings is seen through at one height on both sides). Read by the shadow under the rail's head and down its neck ends between rows 258 and 259, 13.5 to 14 px below the teeth's tops (row 245); ± is a row
Photo 0.237 in ± 0.03 in
AR15Discounts: the 15 in black handguard's right side, 1920 x 1280, harvested
Scale: SIDE (the file's header): 107 px/in, the lens 9 degrees above level. Read by the tube's top edge at row 598, 38 px below the rail's top (560), less what the lens's height adds between the rail's far top edge and the shelf's near corner (13 px)
Worked out 0.245 in ± 0.02 in
2 * {.rail_top_above_bore} - {.height}, harvested
What it would be if the tube's top were as far above the bore as its bottom flat is below it.
The level view's own reading; the larger photo and the tube taken as high as it is deep agree within a hundredth.
How much room a clamp's jaws have under the rail's head. Short: Aero's R-ONE has its neck's foot 0.38 in below its rail's top (aero-r-one-15-handguard.rail_neck_foot_below_rail_top), and three clamps on file whose hooks reach 0.37 to 0.39 in below a rail's top (Aimpoint's Micro T-2 mount, EOTECH's G33 and G45 mounts) stand in this tube's top as drawn. Further out the tube's top falls away: where the tube's rear rim begins behind the rail it is 0.29 to 0.30 below the rail's top on the level photo.
The notch under the rail at the tube's rear end (what the receiver's own rail and the body under it stand in), across1.05 in ± 0.06 in 26.7 mmProvisionalPhoto: Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630
Photo 1.05 in ± 0.06 in used
Aero: the 15 in Kodiak Brown handguard's right side, level, 1000 x 630, harvested
Scale: its own top rail: 37 slot centres on the Picatinny pitch, 59.55 px/in; a level view. Read by the silhouette's rear end steps back from the rail's (column 57) to the tube's (46 to 47) between rows 262 and 263, 17.5 px (0.294 in) below the teeth's tops; carried onto the upper shallow face as the section has it (from 0.44 in out at shelf_below_rail_top to the ridge)
Not seen square on. From the side the tube's rear rim begins 0.29 to 0.30 in below the rail's top, lower than the tube's top beside the neck (shelf_below_rail_top): the rim's highest point is where the notch's side cuts the shallow face, and on the face as drawn that height is 0.525 in out from the middle. As good as the face's own angle (a few degrees): 0.06 in either way. The receiver's rail, 0.835 across, has to pass through it.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Aero Precision $180.00 Anodized Black, On the M4E1 Enhanced upper (no nut) Nov 21, 2026, stock not said
- Aero Precision $220.00 Anodized Black Nov 21, 2026, stock not said
- AR15Discounts $129.95 Anodized Black, On the M4E1 Enhanced upper (no nut) Nov 21, 2026, out of stock that day
- Dirty Bird Industries $129.95 Anodized Black, On the M4E1 Enhanced upper (no nut) Nov 21, 2026, out of stock that day
- KYGUNCO $140.99 Anodized Black, On the M4E1 Enhanced upper (no nut) Nov 21, 2026, out of stock that day
- Aerospace Arms $159.99 Anodized Black, On the M4E1 Enhanced upper (no nut) Nov 19, 2026, out of stock that day
- Right To Bear $189.99 Anodized Black Nov 21, 2026, out of stock that day