Scope mount
Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT
Reptilia's one-piece scope mount for a 30 mm tube: "30mm diameter bore", "39mm (1.54 inch) bore height", "158 grams", "Machined from billet 7075-T6 aluminum". It "attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount". The scope slides in its two rings before their caps are tightened.

- Weight
- 5.57 oz Confirmedpublished: Reptilia, AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT (product page), the maker, read Oct 13, 2026
- Lowest price
- $292.46 at KYGUNCO, read Nov 21, 2026 (Black)
- Maker's number
- 100-116
- Colours
- Black, Flat Dark Earth, Clear Anodize
- Drawn as
- modelled
- Maker's page
- reptiliacorp.com
In “22RB carbine, scoped”, a build on the start page, in place of its SIG SAUER ALPHA-MSR scope mount, 30 mm.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Ring axis above the rail's top1.535 in 39 mmConfirmedPublished: Reptilia, AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT (product page), the maker, read Oct 13, 2026
Published “39mm (1.54 inch) bore height” used
Reptilia, AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT (product page), the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Height: 39mm (1.54")”
Milgear (Finland), Reptilia AUS One-piece Scope Mount - 30 mm - Picatinny - Black (specifications), a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
The maker's own figure; a seller repeats it.
The maker's word is "bore height"; what it is measured from isn't said on its page. Taken from the rail's top: in the launch photo of the mount with a scope in it the tube's centre stands 38.9 mm above the mount's underside between its clamp bosses, at the scale the mount's length sets.
Tube diameter the rings are bored for1.181 in 30 mmConfirmedPublished: Reptilia, AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT (product page), the maker, read Oct 13, 2026
Published “30mm diameter bore” used
Reptilia, AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT (product page), the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Pipe diameter: 30 mm”
Milgear (Finland), Reptilia AUS One-piece Scope Mount - 30 mm - Picatinny - Black (specifications), a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
The maker's own figure; a seller repeats it. It is engraved on the mount's right side as well: "30MM Ø · 39MM HEIGHT" (the maker's on-rifle picture, 1c9910ef03b6).
Largest objective that clears a flat-top rail in it3.031 in 77 mmConfirmedPublished: Reptilia, AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT (product page), the maker, read Oct 13, 2026
Published “Up to 77mm objective will clear flat-top Picatinny” used
Reptilia, AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT (product page), the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Half of it, 38.5 mm, is under the 39 mm the rings' axis stands above the rail: the maker's two figures agree.
Overall length (front ring's front face to the tail's end)5.315 in ± 0.02 in 135 mmCorroboratedPublished: Milgear (Finland), Reptilia AUS One-piece Scope Mount - 30 mm - Picatinny - Black (specifications), a seller, read Oct 13, 2026
Published “Dimensions: 135 x 52 x 45 mm” used
Milgear (Finland), Reptilia AUS One-piece Scope Mount - 30 mm - Picatinny - Black (specifications), a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
The first of three figures the shop doesn't label. Its third, 45 mm, is the mount's width across its rings as the maker's views from above and below have it (ring_width, 44.6 mm). Its second, 52 mm, is no height of the mount that the side views show (56.4 mm from the rail's top to the caps' tops, 62.5 from the jaws' feet): unexplained.
Photo 5.328 in ± 0.07 in
Soldier Systems, stkl3546-2.jpg: the clear mount with a Vortex scope in it, straight left side, 640 x 427, harvested
Scale: the maker's bore height: the tube's centre (rows 177.9 and 245.5 where the tube stands clear ahead of the turret, 177.8 and 244.7 behind it: 211.5) above the mount's underside between its clamp bosses (row 300.2), 88.7 px for optical_axis_above_rail = 1.5354 in: 57.77 px/in. Read by the mount's silhouette from its front ring's front face (column 131.7) to its tail's end (439.5): 307.8 px. The ± is a pixel in the 88.7. By the tube's own width there (67.3 px for 30 mm) the same length reads 5.40 in: a dark tube on white reads thin, and it does by 1.6% at this scale
A published figure, and the finer one; the launch photo, scaled by the maker's bore height, reads the same length within a quarter of a percent, and the shop's third figure is the width the plan views read.
No page of the maker's gives a length. This one sets the scale of every outline and reading of the mount.
Tail's end behind the rear cross bolt0.66 in ± 0.02 in 16.8 mmCorroboratedPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.66 in ± 0.02 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the rear bolt's head (the dark disc's centre of mass, column 541.45) to the tail's end (610.48)
Photo 0.675 in ± 0.02 in
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by the rear clamp's middle (columns 76.0 to 156.4 on row 335: 116.2) to the tail's end (47.18)
The view the outline is traced from, and the bolt's own head; the other side, by the clamp the bolt draws, is within 0.015.
Front ring's front face ahead of the rear cross bolt4.655 in ± 0.03 in 118.2 mmCorroboratedWorked out: {.overall_length} - {.tail_behind_rear_bolt}
Worked out 4.655 in ± 0.03 in used
{.overall_length} - {.tail_behind_rear_bolt}, harvested
The left view reads it directly at 4.655 (column 54.81 from the rear bolt's head at 541.45), the right view 4.640.
Cross bolts, centre to centre2.411 in ± 0.03 in 61.2 mmConflictPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 2.411 in ± 0.03 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the two bolt heads' centres of mass (the dark discs at columns 289.33 and 541.45): 252.12 px. The heads stand on the near face, nearer the lens than the mount's middle, and read a little large for it
Photo 2.394 in ± 0.03 in
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by the two clamps' middles on row 335 (116.2 and 360.95): 244.75 px
Photo 2.418 in ± 0.03 in
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the two bolts lying across the underside, each the middle of its dark bar at the 90 level on rows 470 to 530 (424.4 and 831.5 at the edges 405.9/442.9 and 811.9/849.2): 407.1 px. In the underside's own plane
Worked out 2.364 in ± 0.002 in
6 * {std.picatinny.slot_pitch}, harvested
What the spacing must be if both bolts lie in the middle of a slot each, six apart: kept beside the readings so that the conflict shows (2026-10-19, the detail pass). No view on file or found has the mount on a rail square on: the maker's and the shops' pictures of it on a rifle are the one picture from the front right and above, the launch post's carbine is 640 px wide, and the one photograph of the flat dark earth mount (Silencer Shop's, 0bf480654d9e) is from the front left and above. Searched 2026-10-19: no review, no owner's picture with a rail.
The view the outline is traced from; three views, three scales' worth of the one length, within 0.024 of each other. The six slots' 2.364 is kept as the other reading of the same thing: the readings are 0.03 to 0.056 over it, the scale they share is the shop's unlabelled 135 mm (checked by the bore height and the rings' width), and a bolt half the slot's width across would lie in its slot either way. A straight side view with a rail in it would settle it.
left and slots differ by 0.047 in beyond what each states it is good to.
underside and slots differ by 0.054 in beyond what each states it is good to.
NOT a whole number of rail slots: six of the standard's pitch are 2.364 in, and the three readings are 0.03 to 0.054 over it (6.1 slots). The pitch was the check, not the scale: scaled by six slots the mount would be 132.3 mm long for a published 135, and its rings' axis 38.2 mm above its underside for the maker's 39. What lies in a slot must fit one: the recoil lug midway between the bolts does (lug_length), and the bolts have 0.2 in of slot each to be 0.024 off its middle in, if they are as thin as that leaves (clamp_bolt_shank_d: not read).
Cross bolt's head, its diameter0.383 in ± 0.012 in 9.7 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.383 in ± 0.012 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by each dark disc's extent (columns 270 to 309 and 522 to 562, rows 318 to 357): 40 px
A slot across a hex socket ("either a 5/32 hex or a flat blade driver"). The maker: tightened "to sit flush with the body of the mount": drawn flush with its boss's face.
Cross bolt's axis above the rail's top0 in ± 0.012 in 0 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0 in ± 0.012 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the two heads' centres (rows 337.2 and 338.5) against the underside between the bosses (the silhouette's lower edge there, row 338.0)
On the underside's own level, within a pixel: half of each bolt is under the rail's top, in a slot.
Cross bolt's shank, its diameterNo value yetMissingNo source yet
Not read. The view from below shows each bolt as a dark bar 37 px across (0.22 in) with a glint down its middle: wider than a rail's slot (0.206), so the bar is the groove the bolt lies in with its shadow, not the bolt. The shanks aren't drawn across the rail's place.
Cross bolt's end in the clamp's face, its diameter0.166 in ± 0.015 in 4.2 mmProvisionalPhoto: Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above
Photo 0.166 in ± 0.015 in used
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by the dark round in the rear clamp's face (columns 157 to 175): 17 px
Recoil lug, its middle ahead of the rear cross bolt1.214 in ± 0.015 in 30.8 mmCorroboratedPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 1.214 in ± 0.015 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the lug's middle (column 627.5, between the edges of the raised bar at 611 and 644) from the rear bolt's bar (831.5): 204.4 px. Midway between the two bolts (628.0) within half a pixel
Photo 1.21 in ± 0.025 in
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by the lug where it hangs under the base (columns 229.4 to 250.4 on row 325: 239.9) from the rear clamp's middle (116.2)
In the underside's own plane, and sharp; the side view agrees within 0.004.
A fixed bar across the underside, the body's own metal (the anodize's colour in every picture), hanging into one slot of the rail: what seats the mount along the rail. The maker's installation sheet: "Place the AUS Mount on the 1913 rail with clamps loose, and apply a slight forward pressure toward muzzle".
The slot's middle the mount is counted from, ahead of the rear cross bolt0.032 in ± 0.015 in 0.8 mmCorroboratedWorked out: {.lug_x} - 3 * {std.picatinny.slot_pitch}
Worked out 0.032 in ± 0.015 in used
{.lug_x} - 3 * {std.picatinny.slot_pitch}, harvested
The lug lies in a slot, so the slot three behind it has its middle this far ahead of the rear cross bolt, and the slot three ahead of it as far behind the front one: that is where the app's slot number puts the mount (the rail_clamp anchor).
Recoil lug, its length along the rail0.2 in ± 0.012 in 5.1 mmCorroboratedPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.2 in ± 0.012 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the raised bar's width on row 500 (the dark edges at columns 611 and 644, a shadow's width each): 33 to 34 px
Photo 0.206 in ± 0.015 in
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by where it hangs under the base, row 325: columns 229.37 to 250.43
In its own plane; the side view agrees.
A slot of the rail is 0.206 in wide (std.picatinny.slot_width): it fills one.
Recoil lug, its length across the rail0.63 in ± 0.02 in 16 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.63 in ± 0.02 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the raised bar from end to end up column 627 (rows 452 to 558): 106 px
Shorter than the rail's top flat is wide (0.656): it doesn't reach the rail's sides.
Recoil lug, how far it hangs under the base0.115 in ± 0.012 in 2.9 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.115 in ± 0.012 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the silhouette's lower edge under the lug (row 350) against the underside beside it (338.0): 12 px; the right view reads 12 px at its scale too (0.117)
A slot is 0.118 in deep (std.picatinny.slot_depth): with the underside on the rail's top the lug comes within 0.003 of its floor.
Rear ring, its middle ahead of the rear cross bolt0.642 in ± 0.03 in 16.3 mmCorroboratedPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.642 in ± 0.03 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the rear ring's near face on rows 157 to 190 (columns 434.0 to 514.7: beside it, to 422.4, the far wall of its bore shows): its middle, 474.35, from the rear bolt's head (541.45)
Photo 0.614 in ± 0.03 in
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by the rear ring's near face (columns 139.0 to 219.0): its middle from the rear clamp's middle (116.2)
The view the outline is traced from; the other side is within its ±.
A ring's near face stands 0.9 in nearer the lens than the mount's middle, and the lens was near enough for each ring's far bore wall to show beside its near face (7 to 8 px): what that leaves open is in the ±.
Front ring, its middle ahead of the rear cross bolt4.264 in ± 0.03 in 108.3 mmCorroboratedPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 4.264 in ± 0.03 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the front ring's near face (columns 54.8 to 136.5): its middle, 95.65, from the rear bolt's head (541.45)
Photo 4.251 in ± 0.03 in
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by the front ring's near face (columns 511.0 to 590.8): its middle from the rear clamp's middle (116.2)
The view the outline is traced from; the other side is within 0.013.
Each ring's length along the tube (face to face)0.777 in ± 0.015 in 19.7 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.777 in ± 0.015 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by each ring's near face on rows 157 to 190: 81.7 px (front) and 80.7 px (rear). The right view reads 0.782 and 0.780 at its scale. A near face stands nearer the lens than the mount's middle and reads up to 2% long
Rings, across their side flats1.757 in ± 0.02 in 44.6 mmCorroboratedPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000) and a copy on file (Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 1.757 in ± 0.02 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000) and a copy on file (Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). From below: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the front ring from side to side: 302.1 px from above (rows 358.3 to 660.4 up column 135: 1.758 in at the heads' depth) and 280.3 px from below (359.4 to 639.8: 1.755 in at the screws' ends' depth)
Published “Dimensions: 135 x 52 x 45 mm”
Milgear (Finland), Reptilia AUS One-piece Scope Mount - 30 mm - Picatinny - Black (specifications), a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
The third of the shop's three unlabelled figures.
Two views of the ring itself, from above and from below, within 0.003 of each other; the shop's figure doesn't say what it is of, and is 0.4 mm from this.
Ring caps' top above the rail's top2.222 in ± 0.012 in 56.4 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 2.222 in ± 0.012 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the caps' top edge (row 105.7 on both rings) above the underside between the bosses (338.0): 232.3 px. The right view: 227.3 px at its scale, 2.223
0.687 in above the rings' axis: 0.096 in of cap over a 30 mm tube.
Ring caps' top flat, across0.8 in ± 0.04 in 20.3 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.8 in ± 0.04 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by where the cap screws' bores open on the cap's chamfer: their openings' middle is 0.275 in under the top (row 134.5), on a chamfer that falls 0.395 in from the top flat's edge to the side flat's top; with the screws 0.735 in from the middle (ring_screw_z) and the side flats 0.879, the top flat's edge is 0.40 in from the middle. From above (bf5ec607d063) the brushed band along the cap's middle is 130 to 135 px wide: 0.76 to 0.79 in
Rings' side flats, their top edge above the rail's top1.827 in ± 0.02 in 46.4 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 1.827 in ± 0.02 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the brightness edge up column 100 between the cap's chamfer and its side flat (row 147)
The line between cap and lower half, above the rail's top1.645 in ± 0.012 in 41.8 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 1.645 in ± 0.012 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the dark line across each ring's side flat (row 166.0 on both)
0.110 in above the rings' axis: the caps are shallower than half a ring. In the photo with a scope in it the line is 8 px above the tube's centre at a scale of 57.9 px/in: 0.14.
Rings' side flats, their bottom edge above the rail's top1.473 in ± 0.02 in 37.4 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 1.473 in ± 0.02 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the brightness edge up column 100 where the lit side flat ends over the shadowed lower chamfer (row 184)
0.06 in under the rings' axis: the tube's widest is on the flats.
Rings' lower chamfer, its foot above the rail's top (where the ring meets its neck)0.887 in ± 0.06 in 22.5 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.887 in ± 0.06 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the lower chamfer's slope carried down to the neck's width (base_width): the cap screws' bores come out of it 0.163 in under the side flat's foot (the ovals' middle, row 201) at 0.735 in from the middle, 0.144 in inside the flat: 48 degrees. Its foot itself is in shadow in both side views
Ring cap screws, the two on a side, centre to centre along the tube0.489 in ± 0.008 in 12.4 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.489 in ± 0.008 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the bores' lower ends on each ring (the dark ovals at columns 70.28 and 121.62, 450.0 and 500.91): 51.3 and 50.9 px
Ring cap screws, their axes from the mount's middle0.735 in ± 0.015 in 18.7 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000) and a copy on file (Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.735 in ± 0.015 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000) and a copy on file (Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). From below: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the screws' heads from above (rows 380.1 and 633.0: 126.5 px each side of the middle, 0.736 in) and their bores' lower ends from below (117.7 px each side: 0.731)
Four to a cap, upright, outside the tube: each head shows whole from straight above, in a bore that opens on the cap's chamfer, and the bore comes out through the lower half's chamfer under it (an oval from the side, a round from below).
Ring cap screws, the bore each head sits in0.215 in ± 0.01 in 5.5 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000
Photo 0.215 in ± 0.01 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). Read by each dark round from above (columns 77 to 114 and three more): 37 px
Ring cap screws, the bore's lower end in the lower half's chamfer0.185 in ± 0.01 in 4.7 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.185 in ± 0.01 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by each oval's width along the tube (columns 61 to 80 and three more): 19 to 20 px; from below they are rounds 28 to 29 px across, 0.18 in
Ring cap screws, their heads0.15 in ± 0.01 in 3.8 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000
Photo 0.15 in ± 0.01 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). Read by the darker round inside each bore (columns 83 to 109 and three more): 25 to 26 px
"T15 screws" (the maker's installation sheet); 15 in-lb, dry.
Ring cap screws, their heads' tops under the cap's top0.37 in ± 0.08 in 9.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows a head in profile. From straight above each is lit, a little way down its bore; put a tenth of an inch under where the bore opens on the chamfer.
Worked out 0.37 in ± 0.08 in used
An assumption for the drawing, not a reading: no view on file shows a head in profile. From straight above each is lit, a little way down its bore; put a tenth of an inch under where the bore opens on the chamfer., harvested
Base, across (the plate over the rail, and each ring's neck)0.712 in ± 0.015 in 18.1 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000) and a copy on file (Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.712 in ± 0.015 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000) and a copy on file (Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). From below: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by between the rings from above (rows 462.4 to 575.7 up columns 260 and 300: 113.3 px, 0.711 in at the base's depth) and from below (444.9 to 565.2: 120.3 px, 0.714)
Narrower than the rail's top (0.835): between its clamps the base is a plate lying on the rail, and it reaches under the rail only at the two clamp bosses.
Base plate's top (the ledge under the bridge's lettered web) above the rail's top0.335 in ± 0.02 in 8.5 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.335 in ± 0.02 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the line under the lettered panel between the rings (row 303)
Bridge's top between the rings, above the rail's top0.545 in ± 0.012 in 13.8 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.545 in ± 0.012 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the silhouette's upper edge between the rings (row 281.0 from column 167 to 403)
Bridge's web between the rings (REPTILIA on its left face, the name and size on its right), across0.19 in ± 0.03 in 4.8 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000
Photo 0.19 in ± 0.03 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). Read by up column 300 between the rings: the plate's edges at rows 463 and 576, an edge at 502 and the web's shadow from 532: 30 px, about the mount's middle (517 for 519.5)
Clamp length along the rail (rear boss's rear end to front boss's front end)3.424 in ± 0.03 in 87 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 3.424 in ± 0.03 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the two bosses' ends on rows 345 and 355 (columns 236.4 and 594.4): 358 px
Each clamp boss (the fixed jaw under a bolt's head), along the rail1.026 in ± 0.02 in 26.1 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 1.026 in ± 0.02 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by rows 345 and 355: columns 236.4 to 343.2 and 486.6 to 594.4 (106.8 and 107.8 px)
Clamp bosses' outer face, from the mount's middle (the left side)0.6 in ± 0.025 in 15.2 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000) and a copy on file (Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.6 in ± 0.025 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000) and a copy on file (Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). From below: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by how far each boss stands out of the base's side: 41.6 px from above (0.261 in) and 37.7 px from below (0.224), added to half of base_width
Clamp bosses' feet under the rail's top0.239 in ± 0.012 in 6.1 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.239 in ± 0.012 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the silhouette's lower edge under each boss (rows 362 to 364) against the underside between them (338.0): 25 px
Each steel clamp (right side), along the rail0.78 in ± 0.02 in 19.8 mmProvisionalPhoto: Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above
Photo 0.78 in ± 0.02 in used
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by row 335: columns 76.0 to 156.4 and 321.2 to 400.7 (80.4 and 79.4 px)
Steel clamps' outer face, from the mount's middle (the right side)0.64 in ± 0.025 in 16.3 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000) and a copy on file (Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.64 in ± 0.025 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000) and a copy on file (Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). From below: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by how far the front clamp stands out of the base's side: 43.5 px from above (0.273 in) and 48.8 px from below (0.290), added to half of base_width
Steel clamps' top above the rail's top0.2 in ± 0.03 in 5.1 mmProvisionalPhoto: Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above
Photo 0.2 in ± 0.03 in used
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by the dark blocks' upper edge (row 294) against the underside between them (316): 22 px, less the 0.016 in the view from above adds to what stands nearest the lens
Steel clamps' feet under the rail's top0.25 in ± 0.02 in 6.3 mmProvisionalPhoto: Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above
Photo 0.25 in ± 0.02 in used
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by the dark blocks' lower edge (rows 342 to 343) against the underside between them (316): 27 px, less the same 0.016
Front accessory pocket (two cross holes in a recess, each side), its middle ahead of the rear cross bolt4.225 in ± 0.03 in 107.3 mmCorroboratedPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 4.225 in ± 0.03 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the middle of the two see-through holes (columns 86.6 and 112.9)
Photo 4.18 in ± 0.03 in
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by the middle of the two see-through holes (columns 531.1 and 556.2) from the rear clamp's middle
The view the outline is traced from. A hole seen through from a near lens shows where the line of sight clears both its ends: the two sides differ by that.
Rear accessory pocket, its middle ahead of the rear cross bolt0.705 in ± 0.03 in 17.9 mmCorroboratedPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.705 in ± 0.03 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the middle of the two see-through holes (columns 454.7 and 480.7)
Photo 0.676 in ± 0.03 in
Soldier Systems, stkl3532-5.jpg: the clear mount alone, right side, 640 x 427; taken from about 4 degrees above, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the silhouette's 543.47 px (columns 47.18 to 590.65): 102.25 px/in. Read by the middle of the two see-through holes (columns 172.6 and 198.1) from the rear clamp's middle
The view the outline is traced from; the other side is within its ±.
Accessory pockets' cross holes, above the rail's top0.448 in ± 0.012 in 11.4 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.448 in ± 0.012 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the four holes' centres (rows 290.9 to 291.4) above the underside (338.0)
The holes the maker's ROF mounts and AUS Offset bolt to ("compatible with all of our existing 30mm ROF line"): accessories that aren't in the catalog.
Accessory pockets' recess, along the rail0.555 in ± 0.02 in 14.1 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.555 in ± 0.02 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the front recess's ends (columns 69 to 127): 58 px
Accessory pockets' recess, its height0.26 in ± 0.02 in 6.6 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.26 in ± 0.02 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the recess's upper and lower edges (rows 273 to 300): 27 px
Accessory pockets' cross holes, centre to centre0.25 in ± 0.008 in 6.3 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.25 in ± 0.008 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by 26.3 and 26.0 px on the two pockets; the right view reads 25.1 and 25.5 px at its scale, 0.247
Accessory pockets' cross holes, their diameter0.115 in ± 0.01 in 2.9 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.115 in ± 0.01 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by each see-through round's extent: 12 px
Accessory pockets' recess, its depth into each side0.12 in ± 0.06 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file is square across a pocket. The maker's three-quarter view (eeb891756f2e) has its floor a little way in, with the two holes through it.
Worked out 0.12 in ± 0.06 in used
An assumption for the drawing, not a reading: no view on file is square across a pocket. The maker's three-quarter view (eeb891756f2e) has its floor a little way in, with the two holes through it., harvested
Tail (the block behind the rear ring, over the rear clamp), across0.83 in ± 0.02 in 21.1 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000
Photo 0.83 in ± 0.02 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). Read by up column 930, behind the rear clamp (rows 446.7 to 578.5): 131.8 px at the base's depth
As wide as the rail's top (0.835).
Each clamp boss's outer face, along the rail (its ends are chamfered back to the base)0.88 in ± 0.03 in 22.4 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.88 in ± 0.03 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the front boss's outer edge from below (columns 352 to 500 on row 408): 148 px, for the 182 px it is long against the base (row 430: 333.5 to 515.7)
Each steel clamp's outer face, along the rail (its ends are chamfered back to the base)0.44 in ± 0.04 in 11.2 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000
Photo 0.44 in ± 0.04 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). Read by the front clamp's outer edge from above (columns 422 to 492): 70 px at the base's depth, for the 121 px it is long against the base
Rings' upright corners (between an end face and a side flat), the chamfer0.055 in ± 0.015 in 1.4 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000
Photo 0.055 in ± 0.015 in used
Reptilia, ...CLEAR-ALONE-TOPFOR-SITE-copy-1.jpg: the clear mount straight from above, 1000 x 1000, harvested
Scale: the ring cap screws' spacing along the tube as the left side view has it (ring_screw_spacing, 0.489 in) over the 84 px between the screws' heads here: 171.8 px/in at the heads' depth; the base, an inch and a half further from the lens, by the two cross bolts' heads as the left view has them (2.411 in over 384.5 px: 159.4 px/in). Read by the front cap's corners from above: its front edge at column 79.6 on row 365, 71.5 on row 380 and 69.4 on row 400: about 10 px at 45 degrees
Accessory pockets' recess, its middle above the rail's top0.49 in ± 0.015 in 12.4 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.49 in ± 0.015 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the recess's upper and lower edges (rows 273 and 300): its middle, row 286.5; the cross holes are 0.045 in under it
Cross bolt's head, the hex socket across its flats0.156 in ± 0.001 in 4 mmConfirmedPublished: Reptilia, AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT (product page), the maker, read Oct 13, 2026
Published “which can be tightened with either a 5/32 hex or a flat blade driver” used
Reptilia, AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT (product page), the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
5/32 in. The installation sheet's tools: "5/32 hex driver or large flat blade driver"; 45 in-lb, dry.
Cross bolt's head, its thickness (and the depth of the seat it sits flush in)0.1 in ± 0.04 in 2.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows a head from its edge. The maker says only that it sits flush.
Worked out 0.1 in ± 0.04 in used
An assumption for the drawing, not a reading: no view on file shows a head from its edge. The maker says only that it sits flush., harvested
Underside's lightening pockets, across0.564 in ± 0.02 in 14.3 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.564 in ± 0.02 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the three pockets' long edges (rows 455 and 550): 95 px
Underside pocket (the long one under the bridge, ahead of the front cross bolt), its rear end ahead of the rear cross bolt2.871 in ± 0.03 in 72.9 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 2.871 in ± 0.03 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the pocket's rear end, column 348 on a gridded enlargement, from the rear bolt's bar (831.5)
Underside pocket (the long one under the bridge, ahead of the front cross bolt), its front end ahead of the rear cross bolt3.863 in ± 0.03 in 98.1 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 3.863 in ± 0.03 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the pocket's front end, column 181 on a gridded enlargement, from the rear bolt's bar (831.5)
Underside pocket (between the front cross bolt and the lug), its rear end ahead of the rear cross bolt1.565 in ± 0.03 in 39.8 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 1.565 in ± 0.03 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the pocket's rear end, column 568 on a gridded enlargement, from the rear bolt's bar (831.5)
Underside pocket (between the front cross bolt and the lug), its front end ahead of the rear cross bolt2.17 in ± 0.03 in 55.1 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 2.17 in ± 0.03 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the pocket's front end, column 466 on a gridded enlargement, from the rear bolt's bar (831.5)
Underside pocket (between the lug and the rear cross bolt), its rear end ahead of the rear cross bolt0.264 in ± 0.03 in 6.7 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.264 in ± 0.03 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the pocket's rear end, column 787 on a gridded enlargement, from the rear bolt's bar (831.5)
Underside pocket (between the lug and the rear cross bolt), its front end ahead of the rear cross bolt0.977 in ± 0.03 in 24.8 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.977 in ± 0.03 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the pocket's front end, column 667 on a gridded enlargement, from the rear bolt's bar (831.5)
Underside's round pocket in the tail, its middle behind the rear cross bolt0.288 in ± 0.03 in 7.3 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.288 in ± 0.03 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the round's middle, column 880, from the rear bolt's bar (831.5)
Underside's round pocket in the tail, its diameter0.267 in ± 0.03 in 6.8 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.267 in ± 0.03 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by the round's width (columns 857 to 902): 45 px
Underside's pockets, their depth0.12 in ± 0.06 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the view from below is the only one of them and shows their floors lit and their walls in shadow, not how deep they are. Hidden against a rail.
Worked out 0.12 in ± 0.06 in used
An assumption for the drawing, not a reading: the view from below is the only one of them and shows their floors lit and their walls in shadow, not how deep they are. Hidden against a rail., harvested
The gap between a cap and its lower half0.01 in ± 0.005 in 0.3 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.01 in ± 0.005 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the dark line across each ring's side flat is one row of the picture deep (row 166: 114 of 255 between rows of 165)
The installation sheet: "Ensure that the gap between the base and each ring cap is equal, left to right." Drawn as a groove as deep as it is wide, not a slit through the ring.
The groove each cross bolt lies in, across the underside0.22 in ± 0.01 in 5.6 mmProvisionalPhoto: Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000
Photo 0.22 in ± 0.01 in used
Reptilia, ...CLEAR-ALONE-BOTTOMFOR-SITE.jpg: the clear mount straight from below, 1000 x 1000, harvested
Scale: the mount's overall length, overall_length = 5.315 in, over the underside's 895.0 px (columns 52.4 to 947.4): 168.4 px/in in the underside's plane; the rings, an inch and a half further from the lens, by the cap screws' spacing (0.489 in over 78.7 px: 160.9 px/in). Read by each dark bar's width at the 90 level on rows 470 to 530 (405.9 to 442.9 and 811.9 to 849.2): 37.0 and 37.3 px, a glint down the middle of each
Wider than a rail's slot (0.206): it is the groove and its shadow, with the bolt in it, and says nothing of the bolt's own size.
Cross bolt's head, the hex socket's depth0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows a socket in profile. Each head's socket is a dark hexagon in the two left side views, with the slot across it.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file shows a socket in profile. Each head's socket is a dark hexagon in the two left side views, with the slot across it., harvested
The break on the mount's machined edges0.006 in ± 0.004 in 0.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows an edge in profile at a size to read it: the 640 px side views have the mount's edges a pixel wide (0.01 in) at most.
Worked out 0.006 in ± 0.004 in used
An assumption for the drawing, not a reading: no view on file shows an edge in profile at a size to read it: the 640 px side views have the mount's edges a pixel wide (0.01 in) at most., harvested
Clamp bosses' top above the rail's top (where each runs out under the plate's chamfer)0.29 in ± 0.03 in 7.4 mmProvisionalPhoto: Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427
Photo 0.29 in ± 0.03 in used
Soldier Systems, the launch post's stkl3530-3.jpg: the clear mount alone, straight left side, 640 x 427, harvested
Scale: the mount's overall length, overall_length = 5.315 in (135 mm), over the silhouette's 555.67 px (its front ring's front face at column 54.81, its tail's end at 610.48, each at the 50% level): 104.55 px/in. Checked in the photo of the same mount with a scope in it (4583eabd46bb): at that scale the tube's centre stands 1.532 in (38.9 mm) above the underside between the bosses, for the maker's 39 mm. Read by the front boss on a contrast-raised enlargement: its face runs up to row 308, under the plate's lit chamfer (rows 302 to 308); the underside is row 338.0
Each boss flares out along the rail above the rail's top, in a concave round at each end (columns 226 to 237 and 343 to 354 at the front one): not drawn.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- KYGUNCO $292.46 Black Nov 21, 2026, in stock that day
- AR15Discounts $292.46 Black Nov 21, 2026, stock not said
- KYGUNCO $292.46 Flat Dark Earth Nov 21, 2026, in stock that day
- GRITR Sports $292.46 Flat Dark Earth Nov 21, 2026, in stock that day
- AR15Discounts $292.46 Flat Dark Earth Nov 21, 2026, stock not said
- Primary Arms $299.66 Black Nov 21, 2026, in stock that day
- Sportsman's Warehouse $324.99 Black Nov 21, 2026, in stock that day
- Rifle Supply $292.99 Flat Dark Earth Nov 21, 2026, out of stock that day