Rail section
Magpul M-LOK® Aluminum Rail, 3 Slots
A three-slot Picatinny rail section machined from aluminium and hard anodized black, for any M-LOK hand guard or forend: two screws and two cammed T-nuts hold it in one M-LOK slot, and its recoil lugs sit in the slot. Its ends are bevelled. Magpul: "M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc."

- Weight
- 0.25 oz ± 0.06 oz Provisionalworked out: The rail's own aluminium: the model's volume, 0.1581 cubic inches (pipeline/blender/magpul_mlok_aluminum_rail_section.py's manifest for this length, app/public/models/magpul-mlok-aluminum-rail-section-3-slot.json volume_in3, the screws apart), times std.density.aluminium (1.568 oz to the cubic inch: the alloy isn't stated, "Machined from milspec-anodized aluminum"): 0.248 oz. The ± is the height's (± 0.03 in over its length and the width under its head) and the alloy's 4%.
- Lowest price
- $16.92 at Primary Arms, read Nov 17, 2026
- Maker's number
- MAG580
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- magpul.com
Added to “22RB .22 LR rifle”, a build on the start page, where the designer starts a new rail section.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (along the handguard)1.576 in ± 0.008 in 40 mmConflictPhoto: Primary Arms, MAG580_02.jpg, 2200 x 1467: its underside, square on
Photo 1.576 in ± 0.008 in used
Primary Arms, MAG580_02.jpg, 2200 x 1467: its underside, square on, harvested
Scale: its two through holes (circles fitted to their white: 618.7 and 1579.8 px), the M-LOK interval apart (20 mm: the screws over the first and third grooves), at the base's own plane: 1220.6 px to the inch. Read by the base's outline end to end along the line through the holes: 137 to 2060 px (1924 px)
Photo 1.578 in ± 0.008 in
Primary Arms, MAG580_01.jpg, 2200 x 1467: from above, square on, no screws, harvested
Scale: its two through holes (621.8 and 1582.1 px) the M-LOK interval apart, the white seen through each bounded at the base. Read by the base's outline end to end: 138 to 2062 px (1925 px). The base and the holes are in one plane in both of Primary Arms' views: they agree to 0.002 in
Photo 1.563 in ± 0.014 in
Magpul, 580_2, 700 x 525: from above, square on, screws in, harvested
Scale: its two counterbores' centres (circles fitted to their dark discs: 223.7 and 467.8 px) as two standard pitches: 309.8 px to the inch, at the rail's top. Read by the base's outline end to end (tools/trace.py: 1.563 in). Scaled at the rail's top, 0.24 in nearer the lens than the base whose tips the outline's ends are: short by that much perspective (the seven-slot's photo from above shows it, its through holes 1.8% inside its grooves)
Published “The overall length of this rail is 1-1/2".”
Midwest Gun Works, Magpul Aluminum M-LOK Rail Section, 3 Slots (MAG580), a seller, read Oct 29, 2026 the page, harvested Oct 29, 2026
A fraction to the sixteenth: ± half of it.
The base end to end at the scale of its own holes in the base's plane, seen square; Primary Arms' view from above, the other side of the same plane, agrees to 0.002 in. Magpul's own photo from above is scaled at the rail's top and reads 0.013 short; Magpul's "max overall length of 1.6" is a bound (max_length) the part is under; Midwest Gun Works' 1-1/2" is a round figure.
pa-underside and mgw differ by 0.076 in beyond what each states it is good to.
pa-plan and mgw differ by 0.078 in beyond what each states it is good to.
The base's length, tip to tip of its arched ends: its three slots on the standard's pitch and an end block of about 0.39 in at each end. The rail's top is shorter by the two end bevels (end_bevel_run).
Maximum overall length, as Magpul states it1.6 in 40.6 mmConfirmedPublished: Magpul, M-LOK Aluminum Rail Sections (GIS sheet, MAG580-MAG583_M-LOK_Aluminum_Rail_Sections_GIS_01.pdf), the maker, read Oct 29, 2026
Published “MAG580 - 3 Slots, max overall length of 1.6”” used
Magpul, M-LOK Aluminum Rail Sections (GIS sheet, MAG580-MAG583_M-LOK_Aluminum_Rail_Sections_GIS_01.pdf), the maker, read Oct 29, 2026 the page, harvested Oct 29, 2026
A bound, not the length: the test holds the length under it.
Height (its rail's top above the handguard's face it sits on)0.24 in ± 0.03 in 6.1 mmProvisionalWorked out: {magpul-mlok-aluminum-rail-section-5-slot.height}
Worked out 0.24 in ± 0.03 in used
{magpul-mlok-aluminum-rail-section-5-slot.height}, harvested
Photo 0.21 in ± 0.04 in
Midwest Gun Works, MAG580.jpg, 1500 x 1301: from above its near side, its hardware in front of it, harvested
Scale: an orthographic camera fitted to its own teeth: one pitch between its two teeth's near top corners (555, 605) and (765, 580); across, the rear tooth's top from its near corner to its far end (485, 340) as the flat and the far bevel (0.66 to 0.75 in). Read by the rear tooth's near top edge (600, 603) to the base's near edge under it (600, 700): 96.3 px across the rail's direction: 0.20 to 0.22 in with the body under the head the lower gauge line's width. The camera puts the tooth's upper bevel 68.6 px deep where the photo has its near face about 74: the picks are good to a few pixels, the ±
The line's figure, read on the five-slot with a check on the fit; this length's own photo reads it within its ±.
The line's figure, with the reason in its source; its own oblique photo agrees within its ±.
Width (side to side, at its widest)0.835 in ± 0.005 in 21.2 mmConfirmedWorked out: {std.picatinny.top_width}
Worked out 0.835 in ± 0.005 in used
{std.picatinny.top_width}, harvested
The head's widest is the standard's: Magpul, "various 1913 Picatinny spec rail-mounted accessories".
Photo 0.832 in ± 0.011 in
Magpul, from above, harvested
Scale: its counterbores two standard pitches apart, as for length. Read by the outline across at its teeth (tools/trace.py reports 0.832)
The standard's head; the photo from above reads it within its ±, a check on the photo's scale.
Width of the base's flat face (the body's foot, on the hand guard's face)0.603 in ± 0.01 in 15.3 mmProvisionalPhoto: Primary Arms, MAG580_02.jpg: its underside, square on
Photo 0.603 in ± 0.01 in used
Primary Arms, MAG580_02.jpg: its underside, square on, harvested
Scale: its two through holes the M-LOK interval apart, in the base's plane: 1220.6 px to the inch. Read by the base's flat face between the two lit creases that run its whole length either side (rows 362 and 1098 at columns 400 and 450, 370 and 1107 at 1900, 376 and 1103 at 1350: 736 px), the teeth's widest standing out past them to the silhouette (0.82 in). The faces outside the creases, between the base and the head, show the same tone from below: which way they lean isn't read; drawn as the head's lower faces carried on at 45 degrees, which reach this width 0.228 in under the rail's top
The section under the head: the head's lower 45 degree faces carried on past the lower gauge line until they are this wide (0.228 in under the rail's top), and upright from there to the base, as the clamps' hooks need room under the head (rail-sections.test.ts) and as the photos of the underside show the base: narrower than the head by 0.11 in each side. Until 2026-10-29 the body was drawn upright at the lower gauge line's width (.748), an assumption, and three clamps' hooks stood in it. Midwest Gun Works' photos from above show a dark band 30 px deep under the head's widest on the near side, which a body undercut so far shows only as its shadow on the white ground: said in height's note.
Rail slots3ConfirmedPublished: Magpul, M-LOK® Aluminum Rail, 3 Slots (MAG580), the maker, read Oct 29, 2026
Published “M-LOK® Aluminum Rail, 3 Slots” used
Magpul, M-LOK® Aluminum Rail, 3 Slots (MAG580), the maker, read Oct 29, 2026 the page, harvested Oct 29, 2026
Published “Magpul Aluminum M-LOK Rail Section, 3 Slots”
Midwest Gun Works, Magpul Aluminum M-LOK Rail Section, 3 Slots (MAG580), a seller, read Oct 29, 2026 the page, harvested Oct 29, 2026
Magpul's name for it; counted on its photo from above (three grooves, two teeth between them and an end block at each end).
Rear rail slot's centre ahead of the part's rear end0.395 in ± 0.008 in 10 mmCorroboratedPhoto: Primary Arms, its underside, square on
Photo 0.395 in ± 0.008 in used
Primary Arms, its underside, square on, harvested
Scale: its through holes the M-LOK interval apart, in the base's plane, as for length. Read by the base's tip to the near hole's centre along the line through the holes: 481.7 px (0.3946 in); the other end 0.3934
Photo 0.388 in ± 0.012 in
Magpul, from above, harvested
Scale: its counterbores two standard pitches apart, at the rail's top. Read by the rear end of the base's outline behind the first groove's centre (tools/trace.py); short by the base's perspective, as for length
The base's own plane, square on, at the scale of the holes in it; the photo from above at the top's scale reads it within the two readings' ±.
The end bevel's run: from the base's tip in to the bevel's top edge (along the part)0.14 in ± 0.02 in 3.6 mmProvisionalPhoto: Magpul, from above
Photo 0.14 in ± 0.02 in used
Magpul, from above, harvested
Scale: its counterbores two standard pitches apart, as for length. Read by rows 200 and 340, each end: the base's edge to the bevel's top edge, where the bevel's lighter grey gives way to the flat's (43.5, 42, 42.5 and 42.5 px: 0.136 to 0.140 in). On the centre line the two ends read 39.5 and 52.5 px, the edge there less sharp in the light
Magpul: "beveled ends to reduce snagging". The bevel runs round the arched end at one width, from the base up to the rail's top.
Screws (and T-nuts) it is held by2CorroboratedPublished: Midwest Gun Works, Magpul Aluminum M-LOK Rail Section, 3 Slots (MAG580), a seller, read Oct 29, 2026
Published “Included with this premium piece are 2 cammed T-nuts and 2 recoil/impact mitigation lugs” used
Midwest Gun Works, Magpul Aluminum M-LOK Rail Section, 3 Slots (MAG580), a seller, read Oct 29, 2026 the page, harvested Oct 29, 2026
Photo 2 count
a photo on file, harvested
Scale: none: a count. Read by two counterbores, each with its screw, in the photo from above; two counterbores with their through holes in Magpul's studio photo
The seller's sentence, counted on two photos.
Rail pitches from one screw to the next2ProvisionalPhoto: Magpul, from above
Photo 2 count used
Magpul, from above, harvested
Scale: its grooves, 120.75 px apart. Read by the counterbores' fitted centres (223.7 and 467.8 px) on the first and the third grooves' dark bands' middles (224.5 and 466 px): two pitches, 20 mm, the M-LOK interval
The first screw stands in the first groove's floor, on its centre (rail_slot0_x). Its two T-nuts are the M-LOK interval apart: both in one slot.
M-LOK slots its T-nuts span1ProvisionalWorked out: Two T-nuts (Midwest Gun Works) on two screws the M-LOK interval apart (screw_step: two rail pitches, 20 mm): both in one slot, one in each half of it, as an accessory with nuts 20 mm apart goes (Magpul's M-LOK FAQ: "M-LOK accessories can be direct mounted entirely within a slot"). Magpul's photo of it on a hand guard (76328379992b) has both screws over one slot of the face.
Worked out 1 count used
Two T-nuts (Midwest Gun Works) on two screws the M-LOK interval apart (screw_step: two rail pitches, 20 mm): both in one slot, one in each half of it, as an accessory with nuts 20 mm apart goes (Magpul's M-LOK FAQ: "M-LOK accessories can be direct mounted entirely within a slot"). Magpul's photo of it on a hand guard (76328379992b) has both screws over one slot of the face., harvested
Its seat on the M-LOK face: the centre of the M-LOK slot its rear T-nut is in, ahead of its rear end0.789 in ± 0.012 in 20 mmCorroboratedWorked out: {.rail_slot0_x} + {std.mlok.interval} / 2
Worked out 0.789 in ± 0.012 in used
{.rail_slot0_x} + {std.mlok.interval} / 2, harvested
Its two T-nuts are the M-LOK interval apart (the screws over the first and the third grooves): one in each half of one slot, as a hand stop's two lugs are, and that slot's centre is the second groove's, the part's middle.
Reach inside the handguard (below the mounting face, tightened)No value yetMissingNo source yet
Not published: Magpul's M-LOK tips sheet sets the nut's top level with the recoil lug's bottom edge and gives neither's size.
The screws' counterbores, across0.37 in ± 0.015 in 9.4 mmProvisionalPhoto: Magpul, from above
Photo 0.37 in ± 0.015 in used
Magpul, from above, harvested
Scale: its counterbores two standard pitches apart, as for length. Read by circles fitted to the two counterbores' dark discs: 57.4 px of radius each (0.371 in across); the rear one 166 to 282 px across its centre's rows (0.374)
The screws' button heads, across0.2 in ± 0.03 in 5.1 mmProvisionalPhoto: Magpul, from above
Photo 0.2 in ± 0.03 in used
Magpul, from above, harvested
Scale: its counterbores two standard pitches apart, as for length. Read by the lit rim of the rear head's dome in its counterbore: 191 to 254 px (63 px)
How far below the rail's top the screws' heads seat (the counterbore's floor)0.2 in ± 0.03 in 5.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the counterbore's floor in profile. The heads are down in the counterbores below the grooves' floors in every photo with the screws in; their seat is put 0.04 in above the base.
Worked out 0.2 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file shows the counterbore's floor in profile. The heads are down in the counterbores below the grooves' floors in every photo with the screws in; their seat is put 0.04 in above the base., harvested
The screws' button heads, high0.08 in ± 0.02 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no photo on file shows a screw of it from the side; a button head about a third as high as it is wide.
Worked out 0.08 in ± 0.02 in used
An assumption for the drawing, not a reading: no photo on file shows a screw of it from the side; a button head about a third as high as it is wide., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
M-LOK
- Uppers
- Nordic Components 22RB .22 LR upper, 16" (fit unchecked), Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12" (fit unchecked), Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16" (fit unchecked)
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 12.7" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2 (fit unchecked), Aero Precision AR15 15" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" S-ONE M-LOK Handguard (fit unchecked), Aero Precision AR15 16.6" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 7.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 9.3" R-ONE M-LOK handguard (fit unchecked), BCM MCMR-10 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-13 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-15 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK (fit unchecked), Expo Arms Free Float AR-15 Handguard - M-LOK - 15" (fit unchecked), Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 15" Super Modular Rail MK16 M-LOK (fit unchecked), Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), MAS Defense 12.62" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 15" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 9.87" NERO M-LOK FREE FLOAT (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine) (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length) (fit unchecked), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15") (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $16.92 Nov 17, 2026, in stock that day
- Midwest Gun Works $18.00 Nov 21, 2026, in stock that day
- Magpul $20.95 Nov 21, 2026, stock not said