Red dot mount
SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness
The riser SIG sells the ROMEO-MSR GEN II on: "See-Through Riser Mount" (SIG's sheet; Impact Guns: "Includes : Romeo MSR Gen II / See-Through Riser Mount / Mounting Hardware / Battery"). A Micro-footprint dot screws to its top; the ROMEO-MSR on it has its axis 1.41 in over the rail ("SIGHT HEIGHT 1.41" ABSOLUTE CO-WITNESS"), and the window through its legs lets the iron sights be seen under it. The page linked is Primary Arms' for the pair: no page on file sells the riser alone.

- Weight
- 1.8 oz ± 0.36 oz Provisionalworked out: The model's volume, 1.1494 cubic inches, as aluminium (std.density.aluminium, 0.098 lb a cubic inch: 1.802 oz), from pipeline/blender/sig_romeo_msr_gen_2.py's manifest for this part. The ± is a fifth: the clamp plate and the cross bolt aren't modelled, and the four slots in the base aren't cut.
- Lowest price
- Sold in the SIG Sauer ROMEO-MSR GEN II red dot sight, 2 MOA red dot, on its see-through riser, not by itself
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- primaryarms.com
In “Budget 16 in carbine”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The riser's top (where a dot's base sits) above the rail's top0.813 in ± 0.014 in 20.7 mmProvisionalWorked out: {sig-romeo-msr-gen-2.optical_axis_above_rail} - {sig-romeo-msr-gen-2.axis_above_base}
Worked out 0.813 in ± 0.014 in used
{sig-romeo-msr-gen-2.optical_axis_above_rail} - {sig-romeo-msr-gen-2.axis_above_base}, harvested
1.41 in less the ROMEO-MSR's 0.597 in.
SIG gives the riser's height only as the ROMEO-MSR's axis on it: "SIGHT HEIGHT 1.41" ABSOLUTE CO-WITNESS" (its sheet). Less the sight's own axis over its base it is the deck's height; another Micro-footprint dot on it stands as much higher or lower as its own axis is over its base. Read directly on the same side view it is the seam's 1.058 in over the clamp's bottom less the clamp's 0.245 under the rail, 0.813: the same figure, since the sight's axis over its base was read there too.
The footprint's middle along the riser's top, ahead of the clamp's middle0 in ± 0.02 in 0 mmProvisionalPhoto: Primary Arms SORMSR101_02, the sight on its riser, straight left side on white, 2200 x 1467, objective to the left
Photo 0 in ± 0.02 in used
Primary Arms SORMSR101_02, the sight on its riser, straight left side on white, 2200 x 1467, objective to the left, harvested
Scale: the sheet's length, 69.7 mm = 1403 px (511.3 px/in), and its height, 62.9 mm = 1274 px (514.5 px/in), which agree within 0.6%: 512.9 px/in. Read by the housing's flat base and the riser's top are one length over one another (their front corners at column 665, their rear ones at 1675), and the clamp's middle, which the frame's origin is, is theirs. No view on file shows the screws that hold the sight to the riser: the footprint's middle is taken to be the base's
The riser's length along the rail (its clamp's, and its top's, which is as long)1.973 in ± 0.015 in 50.1 mmProvisionalWorked out: {sig-romeo-msr-gen-2.mount_length}
Worked out 1.973 in ± 0.015 in used
{sig-romeo-msr-gen-2.mount_length}, harvested
Read on Primary Arms' side view of the pair, in the sight's ledger.
The riser clamp's bottom below the rail's top0.245 in ± 0.012 in 6.2 mmProvisionalWorked out: {sig-romeo-msr-gen-2.clamp_below_rail}
Worked out 0.245 in ± 0.012 in used
{sig-romeo-msr-gen-2.clamp_below_rail}, harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots