Optic
Holosun ARO 2 MOA red dot (listed by Holosun as ARO-CORE-RD-2)

- Weight
- 3.38 oz Conflictpublished: holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026Its sources span 3.38 oz to 3.58 oz.
- Lowest price
- Sold in the Holosun ARO 2 MOA red dot, on its 1.63 in lower 1/3 co-witness pedestal mount, not by itself
- Colour
- Black (placeholder)
- Drawn as
- modelled
In “22RB .22 LR rifle”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length2.48 in 63 mmConfirmedPublished: holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026
Published “2.48" × 1.54" × 2.63"” used
holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Holosun's usual L × W × H order.
Published “63x39x67 mm”
Holosun EU shop, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Manufacturer product page; the EU listing agrees.
Width1.54 in 39.1 mmConfirmedPublished: holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026
Published “2.48" × 1.54" × 2.63"” used
holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Published “63x39x67 mm”
Holosun EU shop, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Manufacturer product page; the EU listing agrees.
Height (on the 1.63 in mount, presumed)2.63 in 66.8 mmConfirmedPublished: holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026
Published “2.48" × 1.54" × 2.63"” used
holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Holosun doesn't say whether this includes the mount. It's taller than the 1.63 in axis plus half the housing, so presumably yes. Check against a calibrated side photo.
Published “63x39x67 mm”
Holosun EU shop, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Manufacturer product page; the EU listing agrees.
From the bottom of the mount's rail clamp to the housing top (the battery cap), like the HM3X drawing's 2.42. Holosun's own side view (M3): the top is 2.43 in above the rail top and the clamp reaches 0.23 in below it, 2.66 in all (the photo's two published scales agree within 2%). 2026-10-13: that photo is taken from 20 degrees above, which is where the 2% is from; read from where its lens stood the top is 2.41 over the rail and the clamp's bottom 0.21 to 0.24 under it.
Housing top above the rail top (on the 1.63 in mount)2.41 in ± 0.02 in 61.2 mmConflictWorked out: {.optical_axis_above_rail} + {.top_above_axis}
Photo 2.33 in ± 0.05 in
Sniper Country review, right side on a Picatinny rail; supplied in chat, from the site owner
Scale: the housing's own length, 2.48 in (holosun-aro.length) = 552 px, i.e. 222.6 px/in in the optic's plane. The rail slots read ~6% smaller (206 px/in) because they're ~0.6 in farther from this close camera.. Read by housing top 155 px above the objective tube's center (the optical axis), + the axis's published 1.63 in
Worked out 2.41 in ± 0.02 in used
{.optical_axis_above_rail} + {.top_above_axis}, harvested
Holosun's EU side photos, both, through the cameras fitted to them (2026-10-13): the elevation cap's top 0.78 in above the optical axis. It was 2.428 while the left photo was read as a square view.
Holosun's two product shots, each read from where its lens stood, and consistent with the published 2.63 in overall height (2.41 + 0.23 = 2.64). The review photo (the same optic, a close phone shot) reads 2.33 and stays a visible conflict.
photo and eu-side differ by 0.08 in beyond what each states it is good to.
Objective tube outside diameter1.17 in ± 0.02 in 29.7 mmConflictPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 1.03 in ± 0.04 in
Sniper Country review, right side on a Picatinny rail; supplied in chat, from the site owner
Scale: the housing's own length, 2.48 in (holosun-aro.length) = 552 px, i.e. 222.6 px/in in the optic's plane. The rail slots read ~6% smaller (206 px/in) because they're ~0.6 in farther from this close camera.. Read by objective tube's vertical extent at its front end, 230 px (a cylinder's diameter doesn't foreshorten in a side view)
Photo 1.131 in ± 0.03 in
Holosun EU true side view, ARO on its 1.63 in mount (objective to the left), harvested
Scale: scale from holosun-aro.length = 2.48 in (x-extent 1268 px → 511.3 px/in) and holosun-aro.height = 2.63 in (y-extent 1371 px → 521.3 px/in), which agree within 2.0%; mean 516.3 px/in. Read by height (tooth tops, max over 0.05 in windows) along x [0.1, 0.3] of the traced outline (tools/trace.py); the objective ring's top to bottom, 0.1–0.3 in behind its front
Photo 1.17 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the tube's two edges down column 520 of the left photo (572.5 and 1156.5: 584 px) and column 1640 of the right (554.5 and 1127.5: 573 px), each over the scale where the tube's centre line is seen (0.5849 and 0.5848 in of radius); ± is the camera's distance (1.165 from 30 in, 1.143 from a camera square on) and a pixel at each edge
The same edges as eu-side, at the camera's scale. eu-side took the mean of the scale along the sight (511.3 px/in by .length) and the scale up it (521.3 by .height), and the second is what a view from above does to heights, not a scale.
The same two edges of the same photo, and the other side's, at the scale the published length gives a camera fitted to where the lens stood (2026-10-13): eu-side's 1.131 has the photo's vertical extent in its scale, which a view from 20 degrees above stretches. Holosun's front photo has the 22 mm glass 0.751 of the bezel across (1.153 in if the glass stood at the rim; it stands behind it). The review photo's close phone shot reads 1.03 and stays a visible conflict.
photo and eu-side differ by 0.101 in beyond what each states it is good to.
photo and eu-camera differ by 0.14 in beyond what each states it is good to.
Mount clamp length along the rail1.486 in ± 0.015 in 37.7 mmConflictPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 1.81 in ± 0.09 in
Sniper Country review; supplied in chat, from the site owner
Scale: rail slot pitch 0.394 in (std.picatinny.slot_pitch): 84.0 px/slot behind the mount, 79 px in front, interpolated to ~206 px/in at the clamp. Read by clamp silhouette along the rail, 373 px
Photo 1.441 in ± 0.03 in
Holosun EU true side view, ARO on its 1.63 in mount (objective to the left), harvested
Scale: scale from holosun-aro.length = 2.48 in (x-extent 1268 px → 511.3 px/in) and holosun-aro.height = 2.63 in (y-extent 1371 px → 521.3 px/in), which agree within 2.0%; mean 516.3 px/in. Read by median row width in y [0.05, 0.3] (1.439–1.443) of the traced outline (tools/trace.py); the mount clamp's length along the rail: median row width over its lower 0.05–0.3 in (below the pedestal)
Photo 1.486 in ± 0.015 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the clamp's two ends on the jaw's face nearest each lens: columns 760 and 1503.3 of the left photo on the left jaw's face (z -0.563: x 0.756 and -0.735, 1.491) and columns 708.5 and 1435 of the right photo on the right jaw's (z 0.641: x -0.723 and 0.759, 1.482); their middles 0.011 and 0.018, the cross bolt's 0.01
The clamp's two ends read on the jaw's face nearest each lens through that photo's fitted camera, in both side photos (2026-10-13): 1.491 and 1.482. eu-side's 1.441 is the same left photo's outline at one scale for the whole picture (516.3 px/in, the mean of what its length and its height give, the second of them stretched by the view from above), where that photo's camera has 498.7 px/in at the jaw's face; it stays, and so does the review photo's 1.81 (25% longer: it may include the nut, or read the rail's perspective).
photo and eu-side differ by 0.369 in beyond what each states it is good to.
photo and eu-camera differ by 0.324 in beyond what each states it is good to.
Optical axis above rail top (lower-1/3 mount)1.63 in 41.4 mmConfirmedPublished: holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026
Published “Central Mount Height 1.63"” used
holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Published “an all-new 1.63" lower 1/3 co-witness pedestal mount”
Holosun ARO manual, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Manufacturer; the page and manual agree.
Optical axis above rail top (included low mount)1.05 in 26.7 mmConfirmedPublished: holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026
Published “Low Mount Height 1.05"” used
holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Window diameter0.866 in 22 mmConflictPublished: holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026
Published 22 mm
Holosun, the maker, from the project brief
Holosun calls this a 22 mm housing.
Published “0.866 Diameter” used
holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Published “Window Size: 0.78inches.”
Holosun ARO manual, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
May be the clear aperture rather than the housing window.
Photo 0.85 in ± 0.04 in
Holosun's front view, the objective toward the camera, from a little above, 2200 px, harvested
Scale: the objective bezel's outside diameter on the same row (1049), 574 px, as .tube_od (1.131 in): 508 px/in. Read by the red glass at its widest row: 431 px, 0.751 of the bezel. The glass sits down the bezel, further from the lens than the rim that scales it, so it reads small if anything; ± covers tube_od's ±, the glass's edge and that depth
Current product page; equals the 22 mm housing. The manual's 0.78 in may be a different definition.
brief and manual differ by 0.086 in beyond what each states it is good to.
page and manual differ by 0.086 in beyond what each states it is good to.
manual and front-photo differ by 0.07 in beyond what each states it is good to.
The objective's glass, which the model draws at the front (2026-10-05; until then both ends were drawn at .window_d, the 0.737 in read from behind, and the front lens was 14% small). The page says which glass: "22mm Optical Window", "Refined 22mm objective", "Window Size 0.866 Diameter"; Holosun's front photo reads 0.85.
Weight, lower-1/3 mount1.73 ozConfirmedPublished: holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026
Published “Mount Weight 1.73 oz” used
holosun.com ARO-CORE-RD-2 page, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Holosun's US page gives one mount weight beside its two mounts ("Included Mounts 1.63" Mount 1.05" Mount"), and calls the 1.63 in one its "Central Mount": taken to be that one's. The mount is a part of its own since 2026-11-05 (holosun-aro-163-mount.weight), where Holosun's EU shop's figure for it sold alone stands beside this one.
Weight, optic on its lower-1/3 mount5.11 ozProvisionalWorked out: {.weight_body} + {.mount_weight}
Worked out 5.11 oz used
{.weight_body} + {.mount_weight}, harvested
Optical axis above the sight's own base (its mounting surface, the plane its footprint meets a mount's deck in: D101)0.902 in ± 0.03 in 22.9 mmConflictPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Published “ARO is .9 in”
Holosun (u/Holosun_Josh, answering 'ARO-EVO base to centerline measurement' on r/HOLOSUN; screenshot a copy on file), the maker, from the site owner
The thread's own example drawing is another optic (1.02 / 1.49 / 1.63 in); only this reply is the ARO's. He quotes the ARO-EVO (the solar model) separately at 0.8 in, so his ARO is this one.
Photo 0.967 in ± 0.03 in
Holosun EU true side view, ARO on its 1.63 in mount (objective to the left), harvested
Scale: scale from holosun-aro.length = 2.48 in (x-extent 1268 px → 511.3 px/in) and holosun-aro.height = 2.63 in (y-extent 1371 px → 521.3 px/in), which agree within 2.0%; mean 516.3 px/in. Read by (centre between the top (max over 0.05 in windows) along x [0.1, 0.3]) − (y_min in x [0.6, 0.82] in y [0.8, 1.5]) of the traced outline (tools/trace.py); the objective ring's centre (0.1–0.3 in behind its front) above the body's underside where it overhangs the pedestal (0.6–0.82 in back)
Photo 0.902 in ± 0.03 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the skirt's lower edge, which is the bottom of its chamfer (skirt_bottom_width apart; taken 0.443 in off the middle plane toward the lens): rows 1365 and 1367 down columns 800 and 1450 of the left photo (0.726 and 0.722 in over the rail) and rows 1335 and 1332 down columns 720 and 1420 of the right (0.735 and 0.731); their mean 0.728 under the axis's 1.63 (0.730, and this figure 0.900, with the edge 0.447 off the middle plane as the refitted rear view has it). ± is the edge's distance from the middle plane (0.38 of it), the camera's angle and the picks
eu-side is the same edge read as a square view: from 20 degrees above, an edge 0.44 in nearer the lens stands 0.11 in lower against the tube's centre line, less what the foreshortening takes off 0.9 in (0.05).
Holosun's own .9 in, within a hundredth, once the photo is read from where its lens stood (2026-10-13): eu-side's 0.967 is the skirt's near edge read as if it lay in the middle plane. It stays beside it.
eu-side and eu-camera differ by 0.065 in beyond what each states it is good to.
Called base_to_axis until 2026-11-05, when the 1.63 in mount became a part of its own: what the sight brings to any Micro-footprint mount, its axis this far over the deck it is screwed to. On its own pedestal it puts the axis at Holosun's 1.63 in, which is what the pedestal's deck height is worked out from (holosun-aro-163-mount.deck_above_rail).
Housing top (battery cap) above the optical axis0.78 in ± 0.02 in 19.8 mmCorroboratedPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.798 in ± 0.032 in
Holosun EU true side view, ARO on its 1.63 in mount (objective to the left), harvested
Scale: scale from holosun-aro.length = 2.48 in (x-extent 1268 px → 511.3 px/in) and holosun-aro.height = 2.63 in (y-extent 1371 px → 521.3 px/in), which agree within 2.0%; mean 516.3 px/in. Read by (y_max) − (centre between the top (max over 0.05 in windows) along x [0.1, 0.3]) of the traced outline (tools/trace.py); the housing's highest point (the battery cap) above the objective ring's centre
Photo 0.78 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the elevation cap's centre seen in both photos (left 1427.3, 494.5: the middle of its two dots and of its rings; right 772.3, 481.5): the two lines of sight pass 0.006 in apart at x -0.571, y 2.406, z -0.011, on the cap's inner disc; its top face is 0.004 over that (the photo's top, row 453 at column 1428, is the far rim of a face 0.267 in in radius at 2.41)
eu-side is the photo's top row read as a square view: the far rim of the cap's top face, which a camera 20 degrees above sees 0.09 in higher than a point of the middle plane at that height, less the foreshortening of 0.78 in (0.05).
Seen from both sides, where the two lines of sight meet (2026-10-13); eu-side read one photo's top row as a square view. With clamp_below_rail the height comes to 2.64 in for Holosun's 2.63.
Optical axis above the mount clamp's bottom (on the 1.63 in mount)1.857 in ± 0.03 in 47.2 mmProvisionalPhoto: Holosun EU true side view, ARO on its 1.63 in mount (objective to the left)
Photo 1.857 in ± 0.03 in used
Holosun EU true side view, ARO on its 1.63 in mount (objective to the left), harvested
Scale: scale from holosun-aro.length = 2.48 in (x-extent 1268 px → 511.3 px/in) and holosun-aro.height = 2.63 in (y-extent 1371 px → 521.3 px/in), which agree within 2.0%; mean 516.3 px/in. Read by centre between the top (max over 0.05 in windows) along x [0.1, 0.3] of the traced outline (tools/trace.py); the objective ring's centre above the mount clamp's bottom (the origin)
Optic base above the rail top (on the 1.63 in mount)0.728 in ± 0.03 in 18.5 mmProvisionalWorked out: {.optical_axis_above_rail} - {.axis_above_base}
Worked out 0.728 in ± 0.03 in used
{.optical_axis_above_rail} - {.axis_above_base}, harvested
Holosun's 1.63 in less the base-to-axis height: how far the pedestal lifts the optic (0.73 with Holosun's rounded .9). 0.663 until 2026-10-13, while the base's edge was read as a square view.
Mount clamp's bottom below the rail top0.227 in ± 0.03 in 5.8 mmProvisionalWorked out: {.axis_above_clamp_bottom} - {.optical_axis_above_rail}
Worked out 0.227 in ± 0.03 in used
{.axis_above_clamp_bottom} - {.optical_axis_above_rail}, harvested
The jaws wrap the rail's sides; the HM3X's reach 0.22 in.
Mount clamp's bottom in the optic frame (y, the rail top is 0)-0.227 in ± 0.03 in -5.8 mmProvisionalWorked out: -{.clamp_below_rail}
Worked out -0.227 in ± 0.03 in used
-{.clamp_below_rail}, harvested
Where the side profile's clamp-bottom origin sits in the part frame.
Window (lens) diameter, clear, seen from the rear0.737 in ± 0.03 in 18.7 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.737 in ± 0.03 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's least-squares frame on the vertical layout (136.6 px/in, rms 0.042 in). Read by the window's edge (white to dark) on radial profiles from the axis, radius 50.3 ± 1 px; ± covers the edge and the frame's scale
Draws the rear window (M5): the clear circle the backdrop shows through in the user's end view from the rear, round in every direction (edge radius 50–51 px at 0°, 90°, 180°, 270°). The objective's glass at the front is larger and has its own figure (.window).
Eyepiece bezel outside diameter1.094 in ± 0.02 in 27.8 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 1.094 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the bezel's two edges down column 1688 of the left photo (590.5 and 1136.5) and column 520 of the right (581 and 1117.5), over the scale where its centre line is seen: 0.547 and 0.548 in of radius; ± as tube_od's
Housing: the round body between the two bezels, diameter1.2 in ± 0.03 in 30.5 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 1.2 in ± 0.03 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), its middle taken 0.018 in right of the window's centre, where the skirt, the mount's stem and the clamp's jaws have theirs. Read by the outline's left side from 0.37 in under the axis to 0.47 over it lies on one circle about the axis: 0.596 to 0.605 in from it at seven of the traced outline's points (profiles.front); ± is the frame's scale (2.5%) and the picks
A straight view along the sight shows whichever is widest, and the objective's bezel (tube_od, 1.17) is within a hundredth of it: the two can't be told apart there. That the body is the larger is seen where the tube leaves it (the housing's front face shows as a ring round the tube in d968cfc95219 and 5ec56fffa262, looked at, not measured). Holosun's rear photo from above has the body 4.5% wider than the eyepiece's bezel just behind it (1.14 in before the 0.2 to 0.3 in between them is allowed for). The readings taken on the round body below were taken on a round of 1.19 in, as this read before the rear view's frame was refitted; at 1.20 none of them moves by 0.005.
Eyepiece's rear face behind the clamp's middle (the frame's origin)1.115 in ± 0.02 in 28.3 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 1.115 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the silhouette's rear end (column 1707.5 at the axis's row) against the middle of the clamp's two ends (columns 761.6 and 1503.0): 1.117 in the traced outline; the camera is fitted with the rear end at this figure, and then sees the clamp's middle 0.009 in ahead of the origin on the near jaw's face. ± is that and the clamp's ends
Where the housing stands along the mount. The front end is .length ahead of it.
Housing: its front face, where the objective's tube leaves it, X1.055 in ± 0.015 in 26.8 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 1.055 in ± 0.015 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the step from the tube to the body along the left photo's row 850 (column 599: 1.053) and the right's row 700 (column 1587: 1.058), each on the round body (barrel_od)
Housing: its rear face, where the eyepiece's bezel leaves it, X-1.028 in ± 0.015 in -26.1 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo -1.028 in ± 0.015 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the step from the body to the bezel along row 850 of each photo (left column 1664, right column 539: -1.028 both), on the round body
Housing: the block under the round body, across its flat flanks1.094 in ± 0.04 in 27.8 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 1.094 in ± 0.04 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), z counted from the window's centre as that outline counts it (the mount is drawn from that outline). Read by the outline's two upright stretches under the round body: z -0.530 on the left (y 0.79 to 1.20) and +0.564 on the right, under the battery tray's cover (y 0.81 to 0.96); ± is the frame's scale and a pixel each side (0.007)
The flanks are flat and upright (the rear view's outline is straight there over 0.4 in). The left flank has a raised panel on it in Holosun's left photo that isn't drawn; if it stands out of the flank, the flank itself is that much narrower.
Housing: its underside, across (inside the flanks' lower chamfers)0.894 in ± 0.04 in 22.7 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.894 in ± 0.04 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), z counted from the window's centre as that outline counts it (the mount is drawn from that outline). Read by the outline's two lower corners, where the chamfers end on the underside: z -0.430 and +0.464; ± as skirt_width's
Housing: where a flank's lower chamfer begins, above the rail0.89 in ± 0.03 in 22.6 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.89 in ± 0.03 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the fine dark line along each flank: row 1303 down column 970 of the left photo (0.896, on the flank's plane, skirt_width) and row 1283 down column 1100 of the right (0.880)
Housing: the top of a flat flank, above the rail1.22 in ± 0.04 in 31 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 1.22 in ± 0.04 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the flank's upper edge down column 970: rows 1135 to 1160 (1.251 to 1.198 on the flank's plane), taken at 1150; the rear view's outline has the flank upright to 1.20 and a notch at 1.26. ± is which of the lines there is the edge
Housing: where the flank's shoulder meets the round body, above the rail1.3 in ± 0.04 in 33 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 1.3 in ± 0.04 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the lit line over the flank down column 970, row 1104, met with the round body (barrel_od): y 1.298, 0.494 in off the middle plane
Between the flank's top (skirt_top_y) and this the model has one flat shoulder; the photo has two or three lines there (a bead, by the look), which aren't read.
Housing: its underside's front end, X0.806 in ± 0.02 in 20.5 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.806 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the silhouette's lower front corner (column 733, row 1365) on the underside's near edge (skirt_bottom_width); from there the front end slants up to the housing's front face at the flank's top
Housing: its underside's rear end, X-0.771 in ± 0.02 in -19.6 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo -0.771 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the silhouette's lower rear corner (column 1524, row 1366) on the underside's near edge; from there the rear end slants up to the housing's rear face at the flank's top
Housing: the raised deck along its top, across its top0.65 in ± 0.03 in 16.5 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.65 in ± 0.03 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), its middle taken 0.018 in right of the window's centre, where the skirt, the mount's stem and the clamp's jaws have theirs. Read by the top block's upper corners in the outline: z -0.330 and +0.320
Holosun's left photo sees the deck's top from 17 degrees above, 93 px from its far edge to its near one down column 970: 0.63 in across if the two edges are level with one another.
Housing: the raised deck, across its foot on the round body0.739 in ± 0.03 in 18.8 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.739 in ± 0.03 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), its middle taken 0.018 in right of the window's centre, where the skirt, the mount's stem and the clamp's jaws have theirs. Read by where the top block's sides meet the circle in the outline: z -0.375 and +0.364, at y 2.105 and 2.12
Housing: the deck's front top edge, X0.977 in ± 0.02 in 24.8 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.977 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the housing's front top corner (column 650, row 507) at the deck's own height there
Housing: the deck's top at its front edge, above the rail2.29 in ± 0.02 in 58.2 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 2.29 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the line through the two buttons' centres, each seen in both photos (plus: left 831, 538 and right 1356.5, 524.5, lines of sight 0.004 in apart at x 0.610, y 2.311; minus: left 1105.5, 524.5 and right 1089.5, 511.5, 0.009 apart at x 0.068, y 2.341), carried to deck_front_x: 2.291. The front top corner's own row (507) is that height there
The deck rises to the rear at 3.2 degrees.
Housing: the deck's top under the elevation cap, above the rail2.376 in ± 0.02 in 60.4 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 2.376 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the same line through the two buttons' centres (deck_top_front_y), carried back to turret_x
The cap's top (top_above_axis) is 0.034 over it. Behind the cap the deck ends in a face that slopes down to the round body's rear top edge (the silhouette, rows 478 to 587 over columns 1597 to 1653 of the left photo): drawn from the cap's boss to that edge, with no reading of its own.
Button pad: its front end, X0.89 in ± 0.02 in 22.6 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.89 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the dark line across the deck ahead of the plus button, on the deck's top: column 683 of the left photo (0.900) and column 1487 of the right (0.878)
Button pad: its rear end, X-0.23 in ± 0.02 in -5.8 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo -0.23 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the dark line across the deck between the minus button and the cap: column 1252 of the left photo (-0.227) and column 938 of the right (-0.234)
Button pad: across0.55 in ± 0.04 in 14 mmProvisionalPhoto: Holosun EU, from behind and about 30 degrees above; 2200 px
Photo 0.55 in ± 0.04 in used
Holosun EU, from behind and about 30 degrees above; 2200 px, harvested
Scale: the minus button beside it on the same row, 192 px across (columns 948 to 1140) for button_d. Read by the pad's face inside its border, columns 885 to 1180 on the minus button's row: 1.54 buttons across. ± is the edges (5 px each) and button_d's
Holosun's left photo has the pad's far and near edges 81 px apart down column 970, seen from 17 degrees above: 0.55 in.
Button pad: how far it stands over the deck's rim0.012 in ± 0.01 in 0.3 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.012 in ± 0.01 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by down column 970 the pad's near edge is at row 571 and the deck's near edge at 583: 12 px, of which the rim beside the pad (half of deck_top_width less pad_width) takes 7 seen from 17 degrees above; the 5 left are the pad's own edge
Under the 0.02 in the page draws: it is what parts the pad from the deck.
Button: diameter0.357 in ± 0.01 in 9.1 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.357 in ± 0.01 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by each button's dark ring along the sight, fitted as an ellipse (the plus 181.2 px long, the minus 179.0), on the pad's top at its own height: 0.360 and 0.354
Plus button (the front one): centre, X0.61 in ± 0.01 in 15.5 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.61 in ± 0.01 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the cross's centre in both photos (left 831, 538; right 1356.5, 524.5): lines of sight 0.004 in apart at x 0.610, y 2.311, z 0.006
Minus button: centre, X0.068 in ± 0.01 in 1.7 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.068 in ± 0.01 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the bar's centre in both photos (left 1105.5, 524.5; right 1089.5, 511.5): lines of sight 0.009 in apart at x 0.068, y 2.341, z -0.001
Button: the groove round it, across0.02 in ± 0.01 in 0.5 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.02 in ± 0.01 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the dark crescent at each button's two ends along the sight, 8 to 10 px
How deep it is isn't seen: drawn detail_relief deep.
Button: its raised mark (the minus bar, and each arm of the plus), length0.23 in ± 0.015 in 5.8 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.23 in ± 0.015 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the minus bar's two ends along row 524.5 (columns 1048 and 1163) on the pad's top: x 0.177 and -0.051
Button: its raised mark, across0.044 in ± 0.01 in 1.1 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.044 in ± 0.01 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the plus's arm that points at the lens, across the sight: columns 820 to 842 on the pad's top
How far the marks stand isn't seen: drawn at pad_proud.
The two turrets: their common station, X-0.57 in ± 0.01 in -14.5 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo -0.57 in ± 0.01 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the elevation cap's centre seen in both photos (top_above_axis: x -0.571) and the windage cap's rings in the right photo (an ellipse about 770.1, 973.8 on its face's plane, windage_cap_reach_z: x -0.566)
Turret cap: diameter (both caps)0.534 in ± 0.015 in 13.6 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.534 in ± 0.015 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the elevation cap's top face along the sight in the left photo (columns 1292 to 1562 at its own height: radius 0.267) and the windage cap's face in the right (269 px across on its plane: 0.266). The ring cut in each, further in, is 0.241 and 0.240 in in radius
The two caps are one part: their rings agree to a thousandth once each is at its own distance from the lens.
Turret cap: its coin slot, length0.24 in ± 0.02 in 6.1 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.24 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the windage cap's slot, end to end (712.7, 990 to 828.6, 952.7) on the cap's face: 0.229 along and 0.078 up
Turret cap: its coin slot, across0.04 in ± 0.01 in 1 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.04 in ± 0.01 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the windage cap's slot across its middle, about 20 px on the cap's face
How deep it is isn't seen: drawn as deep as it is wide.
Windage turret: its axis above the rail1.63 in ± 0.02 in 41.4 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 1.63 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the cap's two rings, fitted as ellipses about (770.1, 973.8) and (770.1, 975.0), on the cap's face (windage_cap_reach_z): 1.631
Level with the optical axis: the rear view has the turret's block about the window's centre too (its outer face from 0.26 in under the axis to 0.28 over it, the whole block 0.64 in tall). Read as a square view the right photo has it 0.25 in under the axis: the cap's face is 0.78 in nearer a lens that stands 20 degrees above.
Windage turret: its cap's face from the middle plane0.78 in ± 0.02 in 19.8 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.78 in ± 0.02 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), its middle taken 0.018 in right of the window's centre, where the skirt, the mount's stem and the clamp's jaws have theirs. Read by the turret's outer face in the outline, z +0.793 to +0.800 from the window's centre
The right photo's camera puts the cap level with the optical axis when its face is 0.777 in out: the same figure by another road.
Windage turret: its boss's face (the cap stands on it) from the middle plane0.73 in ± 0.03 in 18.5 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.73 in ± 0.03 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), its middle taken 0.018 in right of the window's centre, where the skirt, the mount's stem and the clamp's jaws have theirs. Read by the step at the turret's outer corners in the outline: z +0.745 where the corner's cut begins, +0.793 on the face
The cap's corner may be a chamfer and not a step: the cap then stands out of its boss by less than the 0.05 in drawn.
Windage turret: its boss, diameter0.66 in ± 0.03 in 16.8 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.66 in ± 0.03 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the boss's rim along the sight, columns 602 to 934 at the cap's row, on its own face's plane: radius 0.329
The rear view has the turret's block 0.64 in tall (1.325 to 1.968 over the rail in its outline), with a flat rear face and cut corners: the boss may not be a plain cylinder behind. Drawn as one.
Battery tray's cover (right flank): its rear end, X-0.52 in ± 0.02 in -13.2 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo -0.52 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the cover's lit rim at its rear end (column 800, row 1200) on its own face (cover_proud out of the flank)
Battery tray's cover: its front end, X0.8 in ± 0.02 in 20.3 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.8 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the cover's lit rim at its front end (column 1455, row 1200) on its own face: 0.797
Battery tray's cover: its lower edge, above the rail0.927 in ± 0.02 in 23.5 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.927 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the cover's lower edge at its middle (column 1120, row 1268) on its own face
At its middle. Round each screw the edge dips a little lower (the head's own rim is at 0.927): the cover's ends are lobes about the screws, drawn as a rounded rectangle's corners.
Battery tray's cover: its upper edge, above the rail1.23 in ± 0.02 in 31.2 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 1.23 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the cover's upper edge at its middle (column 1120, row 1128) on its own face: 1.228
Battery tray's cover: the round of its corners0.13 in ± 0.03 in 3.3 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.13 in ± 0.03 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the rear end's upper round leaves the upper edge about 0.14 in ahead of the end and the end's upright about as far down; the lower rounds are tighter (about 0.10)
One round for the four corners.
Battery tray's cover: how far it stands out of the right flank0.035 in ± 0.02 in 0.9 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.035 in ± 0.02 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), z counted from the window's centre as that outline counts it (the mount is drawn from that outline). Read by the outline's right side: the flank at z +0.564 under the cover, the cover at +0.586 to +0.615 over it (0.022 to 0.051)
Battery tray's cover: its rear screw, X-0.352 in ± 0.015 in -8.9 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo -0.352 in ± 0.015 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the screw head's middle (883, 1230: its rim's and its socket's) on the cover's face
Battery tray's cover: its front screw, X0.652 in ± 0.015 in 16.6 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.652 in ± 0.015 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the screw head's middle (1383, 1232) on the cover's face
The two are 1.00 in apart.
Battery tray's cover: its two screws, above the rail1.01 in ± 0.02 in 25.7 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 1.01 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the two heads' middles (rows 1230 and 1232) on the cover's face: 1.013 and 1.001; ± is the heads' rims, which a ring fitted to their shadow puts 7 px lower
Battery tray's cover: a screw's head, diameter0.165 in ± 0.01 in 4.2 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.165 in ± 0.01 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by each head's rim along the sight (82.2 and 80.8 px) on the cover's face: 0.166 and 0.162
Torx heads. Their sockets aren't drawn; how far the heads stand isn't seen (drawn detail_relief).
The HOLOSUN panel on each side: an oval sunk in the round body, length1.042 in ± 0.02 in 26.5 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 1.042 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the oval's two ends on the round body (barrel_od): columns 853 and 1386 along row 950 of the left photo (x 0.557 and -0.485) and columns 982 and 1505 along row 935 of the right (-0.148 and 0.894): 1.042 both
The HOLOSUN panel: height0.245 in ± 0.02 in 6.2 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.245 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the oval's upper and lower edges on the round body: rows 890 and 1012 down column 1120 of the left photo (1.774 and 1.524) and rows 879 and 993 down column 1240 of the right (1.754 and 1.514)
Its ends are half rounds. That it is sunk and not raised is read from its shading in the two obliques (d968cfc95219, 5ec56fffa262); how deep isn't seen (drawn detail_relief). The lettering in it isn't drawn.
The HOLOSUN panel: its middle above the rail1.64 in ± 0.02 in 41.7 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 1.64 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the middle of the same edges: 1.649 on the left, 1.634 on the right
The HOLOSUN panel on the left side: its middle, X0.036 in ± 0.015 in 0.9 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.036 in ± 0.015 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the middle of its two ends (x 0.557 and -0.485)
The HOLOSUN panel on the right side: its middle, X0.373 in ± 0.015 in 9.5 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.373 in ± 0.015 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the middle of its two ends (x -0.148 and 0.894)
Further forward than the left one: the windage turret has the rear of this side.
The long flute high on each flank: its front end, X0.94 in ± 0.02 in 23.9 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.94 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the flute's front end on the round body: column 657 along row 740 of the left photo (0.941) and column 1526 along row 720 of the right (0.940)
The long flute: its rear end, X-0.92 in ± 0.02 in -23.4 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo -0.92 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the flute's rear end on the round body: column 1607 along row 740 (-0.918)
On the right side the elevation turret's boss and the windage turret's stand in its rear third; it is drawn the same on both sides, under them.
The long flute: its lower edge on the round body, above the rail1.875 in ± 0.02 in 47.6 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 1.875 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by row 835 down column 970 of the left photo (1.875) and row 816 down column 1200 of the right (1.874)
The long flute: its upper edge on the round body, above the rail2.15 in ± 0.02 in 54.6 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 2.15 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by row 668 down column 970 of the left photo (2.141) and row 640 down column 1200 of the right (2.156)
Its upper edge is at the deck's foot. That it is sunk is read from its shading (a dark upper edge, a lit lower one, in both side photos and the obliques); how deep isn't seen (drawn detail_relief).
Mount: the cross bolt's axis, X0.01 in ± 0.015 in 0.3 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.01 in ± 0.015 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the bolt head's ring in the left photo (an ellipse about 1129.7, 1720.9, on the left jaw's face: x 0.015) and the bolt's end face in the right (about 1064.6, 1750.8, on its own plane, 0.93 in out: x 0.004)
Mount: the cross bolt's axis above the rail's top0.015 in ± 0.02 in 0.4 mmConflictPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.015 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: both side photos' fitted cameras (this file's note): 495.7 and 486.0 px/in where they look, each lens 24 in off and 20 degrees up; scales from .length, heights from the tube's centre line. Read by the same two: the head's ring at y 0.007 on the left jaw's face, the end face at 0.022 on its own plane
Photo 0.08 in ± 0.03 in
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), z counted from the window's centre as that outline counts it (the mount is drawn from that outline). Read by the nut's middle in the outline (y -0.145 to 0.299: 0.077) and the bolt's end's (0.014 to 0.169: 0.092), over the frame's rail top; the clamp's roof, picked at row 357, is at 0.014 in that frame
0.32 in over the jaws' bottom in this view, where each side photo has the bolt 0.22 to 0.24 over it.
Two photos from opposite sides, each read from where its lens stood, agree within 0.015 in, and both have the bolt 0.22 to 0.24 in over the clamp's bottom; the rear view is one photo at 135 px/in, and puts it 0.32 over. A bolt at the rail's top has its lower half in a slot; one 0.08 over it would clear the rail altogether. The rear view's stays a visible conflict: a view from behind that looked down some 7 degrees would lift the bolt, 0.7 in further from its lens than the clamp's rear end, by that much.
eu-camera and end-user differ by 0.065 in beyond what each states it is good to.
At the rail's top: the bolt's lower half lies in a slot of the rail. Read as a square view the head was at 0.011 and the nut seemed 0.06 lower than it.
Mount: the cross bolt's head, on the left jaw, diameter0.348 in ± 0.01 in 8.8 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.348 in ± 0.01 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the dark ring round the head, fitted as an ellipse 173.8 px long (and 0.926 as tall: the lens is 22 degrees above it), on the left jaw's face
A round head with no socket showing, flush in the jaw's face with a groove round it (the rear view's outline has nothing standing out of the left jaw). Drawn standing detail_relief out, so that it shows.
Mount: the cross bolt's threaded end, diameter0.18 in ± 0.015 in 4.6 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.18 in ± 0.015 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the end face's rim, 88 px across on its own plane (0.176); the threads behind it 94 px (0.19)
Mount: the cross bolt's end, from the window's centre0.94 in ± 0.02 in 23.9 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.94 in ± 0.02 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), z counted from the window's centre as that outline counts it (the mount is drawn from that outline). Read by the outline's rightmost stretch, z +0.940 from y 0.01 to 0.17
Mount: the nut's inner face, from the window's centre0.641 in ± 0.02 in 16.3 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.641 in ± 0.02 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), z counted from the window's centre as that outline counts it (the mount is drawn from that outline). Read by where the nut begins in the outline: z +0.641 at its lower inner corner, +0.663 at its upper
The clamp's right jaw is the outline inside this; everything of the outline beyond it is the nut and the bolt, which are drawn as themselves.
Mount: the nut's outer face, from the window's centre0.867 in ± 0.02 in 22 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.867 in ± 0.02 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54), z counted from the window's centre as that outline counts it (the mount is drawn from that outline). Read by the outline's upright stretch at z +0.867, y -0.10 to -0.03
Mount: the cross bolt's nut, across flats0.375 in ± 0.02 in 9.5 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.375 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the hexagon's lowest corner (1062.7, 1836) on the nut's outer face: 0.212 in under the bolt's axis, and its two lower sides lie 7 degrees off a hexagon standing on a corner: 0.214 from axis to corner, 0.370 across flats
A 3/8 in hexagon, by the look of it, on a thread of 0.18 to 0.19 in. The rear view's outline has the nut 0.444 in tall (y -0.145 to 0.299), which is such a hexagon seen across its corners (0.433).
Mount: the break of the clamp's four upright corners, along the rail0.05 in ± 0.015 in 1.3 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.05 in ± 0.015 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the left jaw's flat face ends at columns 785 and 1478.3 (x 0.706 and -0.685 on that face, z -0.563) and the clamp at 760 and 1503.3 (0.756 and -0.735): 0.050 at each end
A strip the jaw's whole height at each end of its face, in both side photos. How far it runs across isn't seen: drawn at 45 degrees.
Mount: the top edge of each jaw's upright face at mid length, above the rail0.197 in ± 0.02 in 5 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.197 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the face's level top edge along row 1633.3 on the left jaw's face (z -0.563): 0.197; the ring round the bolt's head ends 0.014 under it
The straight rear view's outline has this edge at 0.243: it is a view from behind and a little above of a clamp 1.5 in deep, whose far end stands higher in it. The side photos' cameras are what the bolt's own height was taken from.
Mount: the level middle of each jaw's top edge, and of the clamp's top under the stem, along the rail0.413 in ± 0.03 in 10.5 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.413 in ± 0.03 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the level edge's two ends at columns 1036.7 and 1243.3 of row 1633.3 (x 0.201 and -0.212): 0.413 about x -0.006; the fold where the clamp's top begins to fall is over the same two ends (column 1036.7 at rows 1493 to 1557)
Mount: the top edge of each jaw's upright face at the face's two ends, above the rail0.02 in ± 0.02 in 0.5 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.02 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the edge falls in a straight line from the level middle to (785, 1711.7) at the front and (1478.3, 1718.3) at the rear: 0.027 and 0.013 on the face
Each jaw's face is tallest at the bolt and falls to both ends, as a boat's side does.
Mount: the clamp's top where the stem stands (level, from one jaw's facet to the other's), above the rail0.28 in ± 0.03 in 7.1 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.28 in ± 0.03 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the facet's upper edge at mid length, (1023.3, 1568.3), on the top's edge as the rear view has it (clamp_saddle_width inside the jaw's face, z -0.415): 0.277; the edge along row 1566.7 a little further back: 0.286
In the stem's shadow in both side photos. The rear view's outline has it at 0.35 to 0.36 (the note at clamp_flank_top_y).
Mount: the clamp's top at its two ends, above the rail0.107 in ± 0.03 in 2.7 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.107 in ± 0.03 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the facet's upper edge at the two ends, (761.7, 1640) and (1501.7, 1631.7): 0.121 and 0.139 if it lay straight over the middle's (z -0.415), 0.107 where its line of sight meets the facet drawn (the plane through the jaw's falling top edge at the middle facet's lean: z -0.381); the same line at x 0.305 comes to 0.231 for the 0.249 a straight fall from the level middle gives
The top falls from the level middle to each end. Drawn as a straight fall, level across. What the top really is at its two ends isn't settled: both side photos show a dark round-ended notch there (x 0.70 to 0.545 on the near jaw's plane in the left one), the two obliques a pocket stepped down into its middle from each end, Holosun's front and rear views (from about 30 degrees above) a dark face nearly the clamp's width with a lighter ledge under it over the rail.
Mount: the sloped facet between each jaw's upright face and the clamp's top, across0.144 in ± 0.03 in 3.7 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.144 in ± 0.03 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54). Read by the outline's left side from the jaw's face (z -0.559) in to the top's edge (z -0.415), in two steps (a break at -0.504 to -0.467)
Drawn as one facet a side, the right jaw's the same as the left's (the nut hides the right's in this view).
Mount: the stem (the pedestal between the clamp and the optic's base), along the rail0.935 in ± 0.02 in 23.7 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.935 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by its two upright edges at columns 903.3 and 1365 along row 1420 (x 0.473 and -0.462 on its side face, 0.475 and -0.466 on the middle plane): 0.935 about x 0.005
Mount: the stem's side face (its widest stretch), along the rail0.475 in ± 0.03 in 12.1 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.475 in ± 0.03 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the two upright edges on the stem's side at columns 1025.7 (a lit band 22 px wide) and 1260: x 0.225 and -0.250
Ahead of it and behind it the stem's sides turn in to its two ends (the left front quarter's oblique, d968cfc95219, shows a narrower front face and a facet between).
Mount: the stem, across0.273 in ± 0.02 in 6.9 mmProvisionalPhoto: ARO-RD2 end view from the rear, on white; supplied in chat
Photo 0.273 in ± 0.02 in used
ARO-RD2 end view from the rear, on white; supplied in chat, from the site owner
Scale: the end view's frame as profiles.front has it (135.4 px/in, rms 0.013 in over its five heights, 1.537 in across for Holosun's 1.54). Read by the outline's two upright edges under the optic's base: z -0.116 and +0.157
Mount: where the stem's upright side begins over its flared foot, above the rail0.327 in ± 0.02 in 8.3 mmProvisionalPhoto: Holosun EU, the left side, taken from 20 degrees above; 2200 px
Photo 0.327 in ± 0.02 in used
Holosun EU, the left side, taken from 20 degrees above; 2200 px, harvested
Scale: the left photo's fitted camera (this file's note): 495.7 px/in at the point it looks at, the lens 24 in off and 20 degrees up; its scale from .length, its height from the tube's centre line. Read by the lit line under the stem's side face along row 1493.3, on that face (z -0.136): 0.327; it runs on down each turned-in facet to the stem's end at the clamp's falling top ((1015, 1481.7) to (895, 1538.3))
A flare all round the stem's foot, 0.047 high at the middle. How far it reaches out isn't seen: drawn at 45 degrees.
Mount: the round pocket the nut sits in on the right jaw, diameter0.48 in ± 0.04 in 12.2 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.48 in ± 0.04 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the pocket's arch over the nut: its two sides at columns 1005 and 1120 of row 1592.5 (x -0.115 and 0.118) and its top at (1060, 1565), each where its line of sight meets the right jaw's facet as drawn: 0.238 and 0.242 from the bolt's axis
Mount: the pocket's two wings, end to end along the rail0.829 in ± 0.02 in 21.1 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.829 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by the wings' round ends at columns 867.5 and 1275 on the right jaw's face (z 0.641): x -0.397 and 0.432
A slot through the round pocket, level with the bolt: the clamping bar's seat. The two narrow slits down from its ends to the jaw's foot (0.012 in) aren't drawn.
Mount: the pocket's wings, their upper edge above the rail0.11 in ± 0.02 in 2.8 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo 0.11 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by row 1655 at column 960 on the right jaw's face: 0.110
Mount: the pocket's wings, their lower edge above the rail-0.006 in ± 0.02 in -0.2 mmProvisionalPhoto: Holosun EU, the right side, taken from 20 degrees above; 2200 px
Photo -0.006 in ± 0.02 in used
Holosun EU, the right side, taken from 20 degrees above; 2200 px, harvested
Scale: the right photo's fitted camera (this file's note): 486.0 px/in at the point it looks at, the lens 24 in off and 20 degrees up, the photo rolled 0.42 degrees; its scale from .length, its height from the tube's centre line. Read by row 1707.5 at column 960 on the right jaw's face: -0.006
Mount: how deep the nut's pocket is sunk in the right jaw's face0.08 in ± 0.04 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the pocket in profile. Between what the right rear quarter's oblique suggests by eye (5ec56fffa262: the pocket's wall beside the nut about a quarter of the nut's own thickness, 0.05) and what the right photo's whole arch over the nut would need if the jaw's facet is as drawn (0.11).
Worked out 0.08 in ± 0.04 in used
An assumption for the drawing, not a reading: no view on file shows the pocket in profile. Between what the right rear quarter's oblique suggests by eye (5ec56fffa262: the pocket's wall beside the nut about a quarter of the nut's own thickness, 0.05) and what the right photo's whole arch over the nut would need if the jaw's facet is as drawn (0.11)., harvested
Mount: the stem's two end faces, across0.136 in ± 0.05 in 3.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: half of stem_width. The left front quarter's oblique (d968cfc95219) shows the front face narrower than the stem and a facet turning in to it; no camera is fitted to that photo, and the side photos don't see across the stem.
Worked out 0.136 in ± 0.05 in used
An assumption for the drawing, not a reading: half of stem_width. The left front quarter's oblique (d968cfc95219) shows the front face narrower than the stem and a facet turning in to it; no camera is fitted to that photo, and the side photos don't see across the stem., harvested
How far the shallow pieces no view shows in profile are sunk or stand (the flutes, the HOLOSUN panels, the grooves round the buttons, the screws' heads, the bolt's head)0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the least the page draws (docs/research/model-detail-pass-2026-10-12.md). Each piece's own entry says what was seen of it.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: the least the page draws (docs/research/model-detail-pass-2026-10-12.md). Each piece's own entry says what was seen of it., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Optic footprint
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline