Magnifier
EOTECH G33 Magnifier, STS Mount
A 3X magnifier on EOTECH's Switch-to-Side (STS) quick-detach mount, with its 7 mm riser fitted, as EOTECH pictures it (lower third co-witness), or without it (absolute co-witness): the lever on the rifle's left, the hinge on its right. In line behind the sight, or swung aside to the right.

- Weight
- 10.58 oz Conflictpublished: eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026Its sources span 10.56 oz to 11.25 oz.
- Lowest price
- $489.00 at AR15Discounts, read Nov 21, 2026 (Black)
- Maker's number
- G33.STS
- Colours
- Black, Tan
- Drawn as
- modelled
- Maker's page
- eotechinc.com
In “Aero M4E1 Enhanced, pencil barrel”, a build on the start page, in place of its EOTECH G45 Magnifier, STS Mount.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length4.016 in 102 mmConflictPublished: eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026
Published “4" x 2.2" x 3.3" (102 x 55.9 x 73.7 mm)” used
eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “4” × 2.2” × 3.3” / 102 × 55.9 × 73.7mm”
EOTECH full catalogue (PDF), p. 23, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “4.4" × 2.2" × 3.3" (113 × 55.9 × 73.7mm)”
EOTECH G-Series Magnifiers user manual, January 2022 (hosted by T.REX ARMS), p. 6, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “4.4" x 2.2" x 3.3" (113 x 55.9 x 73.7 mm)”
T.REX ARMS, EOTECH G33 3x Magnifier, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “L x W x H = 4.4" x 2.2" x 3.3" (113 x 55.9 x 73.7 mm)”
Arisaka Defense, EOTech G33 Magnifier with STS Mount, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Length: 3.9” (99mm)”
L-3 EOTech, User's Manual for G33, Rev E, 2015 (hosted by Brownells), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The magnifier's row of the older sheet (the mount has its own row).
The maker's current page and catalogue, and the one figure the maker's own side views bear out: with the mount's published 1.66 in in the same picture, 4 in gives one scale within 0.1% on the left side and 0.3% on the right. The 2022 manual's 4.4 in (which T.REX and Arisaka repeat) would make the mount 1.83 in, and the 2015 sheet's 3.9 in is 2.5% short of it.
page and manual-2022 differ by 0.433 in beyond what each states it is good to.
page and trex differ by 0.433 in beyond what each states it is good to.
page and arisaka differ by 0.433 in beyond what each states it is good to.
page and manual-2015 differ by 0.118 in beyond what each states it is good to.
catalog and manual-2022 differ by 0.433 in beyond what each states it is good to.
catalog and trex differ by 0.433 in beyond what each states it is good to.
catalog and arisaka differ by 0.433 in beyond what each states it is good to.
catalog and manual-2015 differ by 0.118 in beyond what each states it is good to.
manual-2022 and manual-2015 differ by 0.551 in beyond what each states it is good to.
trex and manual-2015 differ by 0.551 in beyond what each states it is good to.
arisaka and manual-2015 differ by 0.551 in beyond what each states it is good to.
Three figures are published. On EOTECH's two side views the overall length and the STS mount's own length (sts_mount_length, 1.66 in, the 2015 manual) are 1654 and 687 px on the left side and 1116 and 462 px on the right: at 4 in the mount comes to 1.661 and 1.656 in; at 4.4 in it would be 1.83, at 3.9 in 1.62. What the 2022 manual's 4.4 in spans isn't said (nothing in the side views is that long: the mount's lever ends 2.2 in behind the front).
Overall width (the mount's lever on the left to the horizontal adjustment's knob on the right)2.201 in 55.9 mmConfirmedPublished: eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026
Published “4" x 2.2" x 3.3" (102 x 55.9 x 73.7 mm)” used
eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “4.4" × 2.2" × 3.3" (113 × 55.9 × 73.7mm)”
EOTECH G-Series Magnifiers user manual, January 2022 (hosted by T.REX ARMS), p. 6, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 2.115 in ± 0.1 in
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the picture's whole width, the lever's outer face at column 490 to the horizontal knob's at 1158: 669 px. EOTECH's page also says 2.3 ("4 × 2.3 × 3.3 L × W × H", its highlights)
The maker's page; its manual says the same. The rear view, scaled by the mount's own published height, reads 0.09 in less, inside the 5% a close view is good to: the model is drawn at what the picture reads.
Overall height, the riser fitted (the vertical adjustment's knob to the clamp's bottom)3.354 in ± 0.02 in 85.2 mmConflictPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Published “4" x 2.2" x 3.3" (102 x 55.9 x 73.7 mm)”
eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “4" x 2.2" x 3.3" (102 x 55.9 x 73.7 mm)”
eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 3.354 in ± 0.02 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by the silhouette's top row to its bottom row, 1387 px: the vertical adjustment knob's top to the clamp's bottom, the riser fitted
The page's inch and millimetre figures are 10 mm apart; the side view scaled by two published lengths reads the inch figure within its rounding, and is what the model is held to.
page-in and page-mm differ by 0.398 in beyond what each states it is good to.
page-mm and left differ by 0.452 in beyond what each states it is good to.
The maker's line contradicts itself: 3.3 in is 83.8 mm, and 73.7 mm is 2.9 in. Its own left side view, the riser fitted, reads 3.35 in from the knob's top to the clamp's bottom (1387 px), and its right side view 3.33 (929 px at 279): the inch figure.
Weight of the magnifier alone7.8 ozConflictPublished: eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026
Published “Weight without STS™ Mounting System 7.8 oz (221.1 g)” used
eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “The weight is a decent 216 grams”
SPARTANAT, REVIEW: EOTech G33 STS Magnifier, a review, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Weight: 6.1oz (174g)”
L-3 EOTech, User's Manual for G33, Rev E, 2015 (hosted by Brownells), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The older sheet; with its mount's 81 g it comes to 255 g, 45 g under today's figure for the pair.
The maker's current figure; a reviewer's scale reads 2% under it.
page and review differ by 0.18 oz beyond what each states it is good to.
page and manual-2015 differ by 1.66 oz beyond what each states it is good to.
review and manual-2015 differ by 1.48 oz beyond what each states it is good to.
Weight of the STS mount alone2.86 ozConflictPublished: L-3 EOTech, User's Manual for G33, Rev E, 2015 (hosted by Brownells), the maker, read Oct 6, 2026
Published “Weight: 2.9 oz (81g)” used
L-3 EOTech, User's Manual for G33, Rev E, 2015 (hosted by Brownells), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Mount Weight (No Rating) 87 grams”
SPARTANAT, REVIEW: EOTech G33 STS Magnifier, a review, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's figure; the reviewer's is the difference of its two weighings (303 − 216).
manual-2015 and review differ by 0.21 oz beyond what each states it is good to.
Optical axis above the rail's top, with the 7 mm riser1.85 in 47 mmCorroboratedPublished: SPARTANAT, REVIEW: EOTech G33 STS Magnifier, a review, read Oct 6, 2026
Published “Height from Mount to Lens Center (No Rating) 40mm or 47mm with Riser” used
SPARTANAT, REVIEW: EOTech G33 STS Magnifier, a review, read Oct 6, 2026 the page, harvested Oct 6, 2026
The reviewer doesn't say which face of the mount it is from; the pictures say the rail's top.
Photo 1.9 in ± 0.04 in
the left side) and 59dba9812333 (from behind, harvested
Scale: the left side at 413.5 px/in (eotech-g33.length, eotech-g33.sts_mount_length); the rear view at 316 px/in at the mount's rear face (eotech-g33.sts_mount_height). Read by axis_above_clamp_bottom (2.220, the left side) less the recess's ceiling above the clamp's bottom in the rear view (rows 1000 ± 5 and 1100: 0.316 in). The ± is the rear view's: a close picture, read at one depth
A stated figure, and the pictures read 1.3 mm from it, inside their own ±. One reviewer: provisional.
EOTECH states no height: its manual says the mount puts the magnifier "at either an absolute co-witness or lower-third co-witness height". A reviewer gives two figures, and the maker's pictures, which show the riser fitted, agree with the higher: the eyepiece ring's centre is 2.220 in above the clamp's bottom on the left side view, and the rail's top (the ceiling of the clamp's recess) about 0.32 in above it in the rear view, 1.90 in between.
Optical axis above the rail's top, without the riser1.575 in 40 mmProvisionalPublished: SPARTANAT, REVIEW: EOTech G33 STS Magnifier, a review, read Oct 6, 2026
Published “Height from Mount to Lens Center (No Rating) 40mm or 47mm with Riser” used
SPARTANAT, REVIEW: EOTech G33 STS Magnifier, a review, read Oct 6, 2026 the page, harvested Oct 6, 2026
The riser's thickness0.276 in 7 mmConfirmedPublished: EOTECH G-Series Magnifiers user manual, January 2022 (hosted by T.REX ARMS), p. 6, the maker, read Oct 6, 2026
Published “The 7mm riser (included) may be required to align the magnifier optical axis with the sight.” used
EOTECH G-Series Magnifiers user manual, January 2022 (hosted by T.REX ARMS), p. 6, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 0.28 in ± 0.02 in
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by the band between the mount's top plate and the body's underside: rows 675 to 750 on the right side (0.27 in); 1178 to 1298 on the left side at 413.5 px/in (0.29)
The maker's figure (0.276 in); both side views read it within 0.015 in.
Eye relief2.201 in 55.9 mmConfirmedPublished: eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026
Published “Eye Relief 2.2" (55.9 mm)” used
eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Eye Relief 2.2" (55.9mm)”
EOTECH G-Series Magnifiers user manual, January 2022 (hosted by T.REX ARMS), p. 6, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Eye Relief: 2.2” (55.8mm)”
L-3 EOTech, User's Manual for G33, Rev E, 2015 (hosted by Brownells), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's page; both manuals say 2.2 in.
Exit pupil0.299 in 7.6 mmConfirmedPublished: eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026
Published “Exit Pupil 7.6 mm” used
eotechinc.com, G33 Magnifier (Tech Specs), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The eyepiece's rear face behind the mount's centre3.168 in ± 0.02 in 80.5 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 3.168 in ± 0.02 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by the diopter ring's rear face at column 1837, the top plate's middle at column 527 (its ends 184 and 870): 1310 px
Where the eye looks in: the eye relief runs back from here. The mount's centre is the middle of its top plate, which is the middle of its clamp too (the clamp's bottom runs from 0.135 to 1.528 in behind the front, the plate from 0 to 1.661).
The STS mount's length1.661 in 42.2 mmConfirmedPublished: L-3 EOTech, User's Manual for G33, Rev E, 2015 (hosted by Brownells), the maker, read Oct 6, 2026
Published “Length: 1.66” (42.2mm)” used
L-3 EOTech, User's Manual for G33, Rev E, 2015 (hosted by Brownells), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
What it spans is read on the side views: the mount's top plate, the longest thing of the mount but its lever.
The STS mount's height (the clamp's bottom to the hinge knuckles' top)1.181 in 30 mmConfirmedPublished: L-3 EOTech, User's Manual for G33, Rev E, 2015 (hosted by Brownells), the maker, read Oct 6, 2026
Published “Height: 1.18” (30mm) Clears common low profile flip up rear iron sights” used
L-3 EOTech, User's Manual for G33, Rev E, 2015 (hosted by Brownells), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 1.158 in ± 0.015 in
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by the knuckles' top edge at row 732, the clamp's bottom at 1055: 323 px
The maker's figure; the picture reads 2% under it, which is the knuckles' rounded tops seen square on.
What it spans is read on the right side view: the two hinge knuckles stand above the mount's top plate, their tops 1.158 in above the clamp's bottom; the plate's own top is 1.10.
Optical axis above the clamp's bottom, the riser fitted2.22 in ± 0.015 in 56.4 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 2.22 in ± 0.015 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by the diopter ring's top and bottom at rows 553 and 1118 (columns 1669 to 1789), their middle 835.5; the silhouette's bottom row 1754: 918.5 px. The right side view reads 2.20 (the ring's middle at row 441.5, the bottom at 1055, 279 px/in)
The clamp's bottom below the rail's top0.37 in ± 0.035 in 9.4 mmProvisionalWorked out: {.axis_above_clamp_bottom} - {.optical_axis_above_rail_spacer}
Worked out 0.37 in ± 0.035 in used
{.axis_above_clamp_bottom} - {.optical_axis_above_rail_spacer}, harvested
Photo 0.316 in ± 0.03 in
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the ceiling of the recess between the jaws at row 1000 ± 5 (the last row closed across is 990, the first open 1015), the jaws' bottom at 1100
It puts the axis where the reviewer's figure has it and the clamp's bottom where the side view has it; the rear view's reading is 0.05 in less, inside the two ±.
The clamp's bottom in the part frame (y; the rail's top is 0)-0.37 in ± 0.035 in -9.4 mmProvisionalWorked out: -{.clamp_below_rail}
Worked out -0.37 in ± 0.035 in used
-{.clamp_below_rail}, harvested
Where the side profile's origin (the clamp's bottom) sits in the part frame.
The objective tube's outside diameter1.149 in ± 0.025 in 29.2 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 1.149 in ± 0.025 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by the tube's top edge at row 598 (columns 229 to 629), the axis at 835.5: 237.5 px, doubled
Its top edge above the axis, doubled: its underside is behind the riser in a side view. T.REX's picture of the parts laid out shows the tube round above a flat foot with two threaded holes.
The diopter ring's outside diameter1.369 in ± 0.012 in 34.8 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 1.369 in ± 0.012 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by rows 553 to 1118 over columns 1709 to 1789: 566 px
The flutes round the diopter ring18ProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 18 count used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the eyepiece seen from behind, unwrapped about its middle (column 803, row 443) into a strip of angle against radius (a copy on file): eighteen lit lands along the rim at radius 214 to 221 px, 75 to 85 of the strip's 1440 columns apart, a dark flute between each two
Counted where the flutes run out at the ring's rear rim, the one view that shows the ring's whole turn. The side views show them along the ring, a land and a flute about 0.23 in from one to the next at its middle, which is what 18 round a 1.37 in ring come to.
The diopter ring's flutes: their depth0.028 in ± 0.008 in 0.7 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 0.028 in ± 0.008 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the eyepiece seen from behind, unwrapped about its middle (column 803, row 443) into a strip of angle against radius (a copy on file): the lands' outer edge at radius 221 px and the flutes' floors at 212, as a share of the ring's own radius there (half of eotech-g33.eyepiece_ring_od): 9 of 221
The diopter ring's flutes: how much of the turn each takes11° ± 2°ProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 11 deg ± 2 deg used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the eyepiece seen from behind, unwrapped about its middle (column 803, row 443) into a strip of angle against radius (a copy on file): each land 35 to 40 of the 80 columns from one to the next, each flute the rest
The armoured body, top to bottom1.627 in ± 0.015 in 41.3 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 1.627 in ± 0.015 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by rows 503 to 1176 over columns 1109 to 1509: 673 px, 0.805 in above the axis and 0.822 below
The vertical adjustment's knob, across0.7 in ± 0.01 in 17.8 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 0.7 in ± 0.01 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by columns 701 to 989 at rows 448 and 488: 289 px; the right side view reads 0.695 (columns 802 to 995)
The vertical adjustment's knob: its axis behind the mount's centre0.769 in ± 0.015 in 19.5 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 0.769 in ± 0.015 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by the knob's middle at column 845, the top plate's at 527: 318 px
The lugs round each adjustment knob8ProvisionalPhoto: EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px
Photo 8 count used
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by the knob marked R, face on in this view, unwrapped about its middle (column 892.5, row 440) into a strip of angle against radius (a copy on file): eight dark notches, their middles at 35, 81, 125, 171, 217, 261, 306 and 350 degrees, 44 to 46 degrees apart, and eight lugs between them
Counted on the horizontal knob, the one view that shows a knob's whole turn; the vertical one is the same knob by the two side views (two tiers of lugs, one over the other, with a groove between).
The notches between a knob's lugs: their depth0.036 in ± 0.01 in 0.9 mmProvisionalPhoto: EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px
Photo 0.036 in ± 0.01 in used
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by the knob marked R, face on in this view, unwrapped about its middle (column 892.5, row 440) into a strip of angle against radius (a copy on file): the lugs' tips at radius 97.5 px (0.349 in, the knob's own radius), the notches' floors at 87.5 px
The notches between a knob's lugs: how much of the turn each takes24° ± 3°ProvisionalPhoto: EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px
Photo 24 deg ± 3 deg used
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by the knob marked R, face on in this view, unwrapped about its middle (column 892.5, row 440) into a strip of angle against radius (a copy on file): each notch 90 to 100 of the strip's 1440 columns, each lug 80 to 90
Where the knob's notches stood in EOTECH's picture35° ± 3°ProvisionalPhoto: EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px
Photo 35 deg ± 3 deg used
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by the knob marked R, face on in this view, unwrapped about its middle (column 892.5, row 440) into a strip of angle against radius (a copy on file): the first notch's middle, from the direction of the muzzle toward the underside
A knob turns: this is only how it was set when photographed, taken so that the model is as pictured.
The horizontal adjustment's knob: its outer face right of the optical axis's vertical1.11 in ± 0.05 in 28.2 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 1.11 in ± 0.05 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the knob's outer face at column 1158, the middle of the clamp's recess at 807.5: 350.5 px
On the rifle's right (the knob marked R). It is the same knob as the one on top, by the two side views, and stands at the same place along the housing, 0.06 in ahead of the mount's rear face: the rear view's scale there is the mount's.
The eyepiece's glass, visible diameter0.95 in ± 0.06 in 24.1 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 0.95 in ± 0.06 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the glass inside its black retainer, columns 650 to 962 through its middle: 312 px. The eyepiece is the nearest thing to the lens and its scale isn't known better than from 316 px/in (the mount's rear face) to about 340: 0.92 to 0.99 in
The objective's clear aperture0.898 in ± 0.012 in 22.8 mmConfirmedWorked out: {.exit_pupil} * 3
Worked out 22.8 mm ± 0.3 mm used
{.exit_pupil} * 3, harvested
The exit pupil times the magnification: EOTECH's page states both ("Exit Pupil 7.6 mm", "Fixed Magnification 3X"). The glass that shows may be a little larger than what it passes.
The riser's top (the magnifier's foot's underside) above the clamp's bottom1.385 in ± 0.02 in 35.2 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 1.385 in ± 0.02 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by row 1178 on the left side (1.393 in); row 675 on the right side at 279 px/in (1.362): their middle, and the ± covers both
The mount's top plate: its top above the clamp's bottom1.1 in ± 0.012 in 27.9 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 1.1 in ± 0.012 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by row 1298 on the left side (1.103 in); row 750 on the right side at 279 px/in (1.093)
The mount's top plate: its underside above the clamp's bottom0.866 in ± 0.012 in 22 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 0.866 in ± 0.012 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by row 1398 on the left side (0.861 in); row 812 on the right side at 279 px/in (0.871)
The riser's length along the rail1.608 in ± 0.01 in 40.8 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 1.608 in ± 0.01 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by columns 193 to 857 over rows 1188 to 1288: 665 px; 1.602 on the right side (columns 895 to 1341)
The riser's width across the rail0.75 in ± 0.05 in 19 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 0.75 in ± 0.05 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the block under the body, columns 688 to 924 at rows 715 and 740: 237 px
The mount's top plate: its width across the rail, without the arm to the hinge0.64 in ± 0.05 in 16.3 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 0.64 in ± 0.05 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by columns 707 to 909 at row 790: 203 px
The clamp base's top (the lever's top edge) above the clamp's bottom0.555 in ± 0.02 in 14.1 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 0.555 in ± 0.02 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by the lever's top edge at rows 1518 to 1528 on the left side (0.571 to 0.547 in); the base's top at row 900 on the right side at 279 px/in (0.555)
The clamp's length along the rail1.395 in ± 0.01 in 35.4 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 1.395 in ± 0.01 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by the silhouette's lowest rows (1728 to 1748), columns 240 to 816: 577 px, its middle at column 528, under the top plate's (527). The right side reads 1.398 (columns 923 to 1312)
The quick-detach lever's tail end, behind the mount's centre (closed)1.381 in ± 0.02 in 35.1 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 1.381 in ± 0.02 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by the lever's tail end at column 1098, the top plate's middle at 527: 571 px. From the right side, seen past the mount, its end reads 1.31
The lever is on the rifle's left and lies along the clamp, its tail to the rear.
The quick-detach lever's underside above the clamp's bottom0.085 in ± 0.02 in 2.2 mmProvisionalPhoto: eotechinc.com's gallery: the left side, square on, in line, 2049 px
Photo 0.085 in ± 0.02 in used
eotechinc.com's gallery: the left side, square on, in line, 2049 px, harvested
Scale: eotech-g33.length across the picture (1654 px: 413.5 px/in) and eotech-g33.sts_mount_length along the mount's top plate (687 px: 413.9 px/in): two published sizes, one scale within 0.1%. Read by the tail's underside at row 1719 behind the clamp (columns 830 to 1098), the bottom at 1754
The quick-detach lever's thickness across the rail0.2 in ± 0.05 in 5.1 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 0.2 in ± 0.05 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the outermost piece on the left of the clamp, columns 490 to 556 at rows 940 to 1065: 66 px
The clamp's left face (the lever's outer face), left of the rail's centre1 in ± 0.05 in 25.4 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 1 in ± 0.05 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by column 490, the middle of the recess between the jaws at 807.5: 317.5 px
The mount's hinge axis above the clamp's bottom0.871 in ± 0.03 in 22.1 mmCorroboratedPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 0.871 in ± 0.03 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the hinge pin's bright end, columns 976 to 1076 and rows 775 to 873, its middle at row 824.8; the jaws' bottom at 1100: 275 px
Photo 0.85 in ± 0.03 in
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by the knuckles' rounded top at row 732 and their radius (half of hinge_knuckle_d): the axis at row 818
The pin's own end, seen end on; the side view's reading comes through the knuckle's radius and agrees within 0.02 in.
The mount's hinge axis to the right of the rail's centre0.69 in ± 0.04 in 17.5 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 0.69 in ± 0.04 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the pin's middle at column 1025.4, the middle of the recess between the jaws at 807.5: 218 px
On the rifle's right as EOTECH pictures it: the rear views have the pin on the picture's right with the knob marked R, and the right side view has the hinge toward the lens.
The hinge pin's diameter0.316 in ± 0.02 in 8 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 0.316 in ± 0.02 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by its bright end, 100 px across
The hinge knuckles' outside diameter0.62 in ± 0.03 in 15.7 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 0.62 in ± 0.03 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the rounded housing about the pin: its top at row 727, 98 px above the pin's middle, and its right at column 1120, 95 px from it
The hinge's length along the rail (both knuckles and the barrel between them)1.394 in ± 0.01 in 35.4 mmProvisionalPhoto: EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px
Photo 1.394 in ± 0.01 in used
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by columns 922 to 1310 at rows 817 to 862: 389 px, its middle 0.005 in behind the top plate's (column 1117.5)
Each hinge knuckle's length along the rail0.37 in ± 0.012 in 9.4 mmProvisionalPhoto: EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px
Photo 0.37 in ± 0.012 in used
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by row 877: the rear knuckle columns 923 to 1027 (0.376), the front one 1209 to 1310 (0.366), the barrel 1036 to 1198 between
The wall under the hinge: its inner face right of the rail's centre0.13 in ± 0.04 in 3.3 mmProvisionalPhoto: EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px
Photo 0.13 in ± 0.04 in used
EOTECH's g33sts_blk_rv_closed as Arisaka Defense serves it: from behind, in line, 1600 px, harvested
Scale: eotech-g33.sts_mount_height from the clamp's bottom to the hinge knuckles' top at the mount's rear face (373 px: 316 px/in). A close view: the picture's whole width against eotech-g33.width is 304 px/in, and what is nearer the lens reads larger, so the ± is 5% or more. Read by the wall's left edge at column 849 at row 865, the middle of the recess between the jaws at 807.5: 41.5 px; at row 890 it is at column 867 (0.19)
The hinge stands on a wall up from the clamp's right side; the plate's underside is open to the left of it (the backdrop shows there in the rear view).
The hinge barrel's diameter (the plate's arm, between the knuckles)0.5 in ± 0.04 in 12.7 mmProvisionalPhoto: EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px
Photo 0.5 in ± 0.04 in used
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by the barrel between the knuckles, its top at row 740 under the plate's edge and its underside at 880, above the two gaps the backdrop shows through: 140 px
The clamp's adjustment nut on the mount's right face, across0.36 in ± 0.02 in 9.1 mmProvisionalPhoto: EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px
Photo 0.36 in ± 0.02 in used
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by the slotted round nut under the hinge barrel, columns 1070 to 1170: 100 px
The clamp's adjustment nut: its axis above the clamp's bottom0.32 in ± 0.02 in 8.1 mmProvisionalPhoto: EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px
Photo 0.32 in ± 0.02 in used
EOTECH's g33sts_blk_profile_b as Arisaka Defense serves it: the right side, square on, in line, 1600 px, harvested
Scale: eotech-g33.length across the picture (1116 px: 279.0 px/in) and eotech-g33.sts_mount_length along the mount's top plate (462 px: 278.3 px/in): one scale within 0.3%. Read by its middle at row 965, the bottom at 1055; along the rail it is at column 1120, under the plate's middle (1117.5)
How far the magnifier swings to the side on its mount93.5° ± 3°ProvisionalPhoto: from behind, in line) and 5a29b52fe5bf (from behind, swung aside; EOTECH's g33sts_blk_rv_open as Arisaka Defense serves it
Photo 93.5 deg ± 3 deg used
from behind, in line) and 5a29b52fe5bf (from behind, swung aside; EOTECH's g33sts_blk_rv_open as Arisaka Defense serves it, harvested
Scale: none needed: an angle between two lines, each within one picture. Read by in line, the pin at (1025.4, 824.8) and the eyepiece's bright spot at (803.6, 444.4): 30.2 degrees left of upright; swung aside, the pin at (714, 677) and the spot at (1107.8, 478.6): 26.8 degrees above level. The ± is the spot's: it is the far aperture seen through the lenses, not a mark on the housing
To the rifle's right as EOTECH pictures it. No page states the angle; it is read from the maker's two rear views, in line and swung aside, as the turn of the line from the hinge pin to the bright spot in the eyepiece. That line is the same length in both (440.3 and 441.0 px), which is what a turn about the pin leaves alone.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Sight and magnifier
- Optics
- Aimpoint Duty RDS Red Dot Sight, Aimpoint Micro T-2 Red Dot Reflex Sight, Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun ARO 2 MOA red dot (listed by Holosun as ARO-CORE-RD-2), Holosun EPS Carry enclosed pistol sight, 2 MOA red dot (EPS-CARRY-RD-2), Holosun HS510C Open Reflex MRS Solar QD Mount, SIG Sauer ROMEO-MSR GEN II red dot sight, 2 MOA red dot, SIG Sauer ROMEO5 GEN II 1x20mm Compact Illuminated Dot Sight, 2 MOA red dot
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $489.00 Black Nov 21, 2026, in stock that day
- Sportsman's Warehouse $516.00 Black Nov 21, 2026, in stock that day
- T.REX ARMS $516.00 Tan Nov 21, 2026, in stock that day
- KYGUNCO $527.68 Black Nov 21, 2026, in stock that day
- T.REX ARMS $548.25 Black Nov 21, 2026, in stock that day
- Primary Arms $645.00 Black Nov 21, 2026, in stock that day
- Primary Arms $645.00 Tan Nov 21, 2026, in stock that day
- Sportsman's Warehouse $645.00 Tan Nov 21, 2026, in stock that day
- Impact Guns $679.00 Black Nov 21, 2026, in stock that day
- Rifle Supply $663.99 Black Nov 21, 2026, out of stock that day