Optic
Holosun HS510C Open Reflex MRS Solar QD Mount
Holosun's open reflex sight: a 2 MOA dot, a 65 MOA circle or both ("Reticle 2 MOA Dot & 65 MOA Circle"), a solar cell on its rear deck, "aluminum housing with a titanium hood", a CR2032 in a tray on its side. It comes on its quick-detach mount: "Integrated QD mount with 1.41 inch dot height for fast installation and iron sight alignment". Drawn as Holosun draws and photographs it: the QD lever, the battery tray and the windage screw on the rifle's right, the brightness buttons on its left.

- Weight
- 7.58 oz ± 0.018 oz Conflictpublished: Holosun Europe, HS510C open reflex red dot sight (article 70127430), Mechanical Parameters, the maker, read Oct 6, 2026Its sources span 7.57 oz to 9.75 oz.
- Lowest price
- $272.79 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- HS510C
- Colours
- Black, FDE
- Drawn as
- modelled
- Maker's page
- holosun.com
In “Aero M4E1 Enhanced, pencil barrel”, a build on the start page, in place of its EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length3.3 in ± 0.005 in 83.8 mmConfirmedPublished: Holosun Europe, HS510C (article 70127430): the dimensioned drawing in the page's gallery (side view from the right, end view from the front), the maker, read Oct 6, 2026
Published “3.30 in” used
Holosun Europe, HS510C (article 70127430): the dimensioned drawing in the page's gallery (side view from the right, end view from the front), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Dimension (in) Body 3.3" x 1.68" x 1.78"”
Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Size: 84x45x59 mm”
Holosun Europe, HS510C open reflex red dot sight (article 70127430), Mechanical Parameters, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Holosun's dimensioned drawing says between which lines; the two pages' figures agree with it.
The housing's rear end to its front face (the drawing's extension lines stand at those two); the mount and its lever are inside it.
Overall width (over the QD lever)1.8 in ± 0.005 in 45.7 mmConflictPublished: Holosun Europe, HS510C (article 70127430): the dimensioned drawing in the page's gallery (side view from the right, end view from the front), the maker, read Oct 6, 2026
Published “1.80 in” used
Holosun Europe, HS510C (article 70127430): the dimensioned drawing in the page's gallery (side view from the right, end view from the front), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Size: 84x45x59 mm”
Holosun Europe, HS510C open reflex red dot sight (article 70127430), Mechanical Parameters, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
1.77 in: 0.03 in less than the drawing's. The page doesn't say what its 45 mm spans.
The drawing shows what its 1.80 in spans (the lever's end to the housing's other side); the shop's 45 mm is a table entry with no view, and 0.03 in less.
drawing and eu differ by 0.028 in beyond what each states it is good to.
The drawing's extension lines stand at the QD lever's outer end and at the housing's far side: the housing alone is narrower (body_width).
Overall height (the clamp's bottom to the hood's top)2.31 in 58.7 mmConfirmedPublished: Holosun Europe, HS510C (article 70127430): the dimensioned drawing in the page's gallery (side view from the right, end view from the front), the maker, read Oct 6, 2026
Published “2.31 in” used
Holosun Europe, HS510C (article 70127430): the dimensioned drawing in the page's gallery (side view from the right, end view from the front), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Size: 84x45x59 mm”
Holosun Europe, HS510C open reflex red dot sight (article 70127430), Mechanical Parameters, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The drawing says between which lines; the shop's 59 mm (2.32 in) agrees.
On its mount: the drawing's extension lines stand at the hood's top and at the mount's lowest edge, below the rail's top.
Housing width (the sight without its mount)1.68 in 42.7 mmConfirmedPublished: Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026
Published “Dimension (in) Body 3.3" x 1.68" x 1.78"” used
Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The second of the US page's three "Body" figures, taken as the housing's width (Sportsman's Warehouse labels the three L, W, H). The drawing's end view has the housing this wide and the whole 1.80 in over the lever.
Housing height (the sight without its mount)1.78 in 45.2 mmConfirmedPublished: Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026
Published “Dimension (in) Body 3.3" x 1.68" x 1.78"” used
Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The third of the US page's three "Body" figures, taken as the sight's height off its mount. Not used by the model: the drawing has the hood's top 2.31 in above the clamp's bottom, and the mount alone is 15 mm (0.59 in), which leaves 1.72 in above the mount's top. The 0.06 in between the two isn't explained by any source (the sight may seat into the mount, or the figure may be the width over the lever, which the drawing gives as 1.80).
Optical axis above the rail's top1.41 in 35.8 mmConfirmedPublished: Holosun Europe, HS510C (article 70127430): the dimensioned drawing in the page's gallery (side view from the right, end view from the front), the maker, read Oct 6, 2026
Published “1.41 in” used
Holosun Europe, HS510C (article 70127430): the dimensioned drawing in the page's gallery (side view from the right, end view from the front), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Integrated QD mount with 1.41 inch dot height for fast installation and iron sight alignment.”
Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “line of sight height: 35.8 mm”
Holosun Europe, HS510C open reflex red dot sight (article 70127430), Mechanical Parameters, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The drawing shows what the figure is measured from; the US page's dot height and the shop's 35.8 mm (1.409 in) are the same figure.
The window's centre above the rail's top. The drawing's 1.41 in runs from the window's centre line to the surface under the mount's cross bar that sits on the rail; Holosun's pages call it the dot height and the line of sight height.
Window's centre above the housing's base (the mount's top edge)1.04 in 26.4 mmConfirmedPublished: Holosun Europe, HS510C (article 70127430): the dimensioned drawing in the page's gallery (side view from the right, end view from the front), the maker, read Oct 6, 2026
Published “1.04 in” used
Holosun Europe, HS510C (article 70127430): the dimensioned drawing in the page's gallery (side view from the right, end view from the front), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The drawing's second height on the end view: from the window's centre line down to the line where the housing's front panel ends over the mount.
Window height0.91 in 23.1 mmConfirmedPublished: Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026
Published “Window Size (in) 0.91" x 1.26"” used
Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Lens size: 23x30 mm”
Holosun Europe, HS510C open reflex red dot sight (article 70127430), Mechanical Parameters, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's US table; the shop's 23 mm (0.906 in) agrees.
Window width1.26 in 32 mmConflictPublished: Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026
Published “Window Size (in) 0.91" x 1.26"” used
Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Lens size: 23x30 mm”
Holosun Europe, HS510C open reflex red dot sight (article 70127430), Mechanical Parameters, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Large 32mm x 24mm lens and open design”
Primary Arms, Holosun 510C Solar Powered Red Dot Sight - Multi-Reticle (HS510C), Features, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's US table, which a seller's 32 mm repeats; the European shop's 30 mm stays a visible conflict (it is what the drawing's inner window line reads from the front).
us and eu differ by 0.079 in beyond what each states it is good to.
eu and primary-arms differ by 0.079 in beyond what each states it is good to.
Two figures from the maker that differ by 2 mm. The drawing's end view from the front has two nested window lines: the frame's opening (the heavier line, traced as the `window` feature) is 1.256 in wide and 0.99 in high at its arched top's crown, 0.77 at its sides; the lighter line inside it reads about 1.18 by 0.89 in, the shop's 30 x 23 mm. The US page's 1.26 in is the frame opening's width. The model's opening is the traced frame line.
Weight of the sight without its mount4.94 ozConfirmedPublished: Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026
Published “Body (oz) Weight 4.94 oz” used
Holosun, HS510C Open Reflex MRS Solar QD Mount, Specs (PHYSICAL DATA), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Weight of the QD mount alone1.59 oz ± 0.018 ozConfirmedPublished: Holosun Europe, QD Mount 510C (HS-QD-MOUNT-510C, article 70143980), Mechanical Parameters, the maker, read Oct 6, 2026
Published “Weight: 45 g” used
Holosun Europe, QD Mount 510C (HS-QD-MOUNT-510C, article 70143980), Mechanical Parameters, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
QD mount's own length3.189 in ± 0.02 in 81 mmConfirmedPublished: Holosun Europe, QD Mount 510C (HS-QD-MOUNT-510C, article 70143980), Mechanical Parameters, the maker, read Oct 6, 2026
Published “Size: 81x42x15 mm” used
Holosun Europe, QD Mount 510C (HS-QD-MOUNT-510C, article 70143980), Mechanical Parameters, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The mount sold alone (HS-QD-MOUNT-510C): the plate under the housing, longer than the foot that clamps the rail (mount_length).
QD mount's own width1.654 in ± 0.02 in 42 mmConfirmedPublished: Holosun Europe, QD Mount 510C (HS-QD-MOUNT-510C, article 70143980), Mechanical Parameters, the maker, read Oct 6, 2026
Published “Size: 81x42x15 mm” used
Holosun Europe, QD Mount 510C (HS-QD-MOUNT-510C, article 70143980), Mechanical Parameters, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
QD mount's own height0.591 in ± 0.02 in 15 mmConfirmedPublished: Holosun Europe, QD Mount 510C (HS-QD-MOUNT-510C, article 70143980), Mechanical Parameters, the maker, read Oct 6, 2026
Published “Size: 81x42x15 mm” used
Holosun Europe, QD Mount 510C (HS-QD-MOUNT-510C, article 70143980), Mechanical Parameters, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Mount's clamp length along the rail2.131 in ± 0.02 in 54.1 mmConflictPhoto: Holosun EU dimensioned drawing, side view from the right (the hood, at the muzzle's end, to the right; the QD lever toward the rear)
Photo 2.131 in ± 0.02 in used
Holosun EU dimensioned drawing, side view from the right (the hood, at the muzzle's end, to the right; the QD lever toward the rear), harvested
Scale: scale from holosun-hs510c.length = 3.3 in (x-extent 707 px → 214.2 px/in) and holosun-hs510c.height = 2.31 in (y-extent 497 px → 215.2 px/in), which agree within 0.4%; mean 214.7 px/in. Read by median row width in y [0.005, 0.03] (0.142–2.170) of the traced outline (tools/trace.py); the side view's lowest rows: the foot's bottom edge, rear corner to front corner
Photo 2.189 in ± 0.015 in
Primary Arms (HS510C_02), the black HS510C's left side, straight on (the hood to the left), harvested
Scale: the drawing's length (3.30 in) and height (2.31 in) on the photo's own outline, which fit it within 2%. Read by median row width over the foot's lowest rows, 0.005 to 0.03 in above its bottom (2.125 to 2.225 over those rows): the same edge from the other side, with no lever in front of its rear corner
Holosun's drawing, whose two published sizes fit its outline within 0.4%; the seller's photo reads the same edge 0.06 in longer on an outline its two sizes fit to 2%, and stays a visible second reading.
drawing-side and photo-left differ by 0.058 in beyond what each states it is good to.
The foot that sits over the rail, at its bottom edge. Not published: read off the drawing's side view.
Mount clamp's bottom below the rail's top0.219 in ± 0.01 in 5.6 mmProvisionalPhoto: Holosun EU dimensioned drawing, end view from the front (the HOLOSUN panel under the window; the QD lever at the picture's left)
Photo 0.219 in ± 0.01 in used
Holosun EU dimensioned drawing, end view from the front (the HOLOSUN panel under the window; the QD lever at the picture's left), harvested
Scale: scale from holosun-hs510c.width = 1.8 in (x-extent 388 px → 215.6 px/in) and holosun-hs510c.height = 2.31 in (y-extent 495 px → 214.3 px/in), which agree within 0.6%; mean 214.9 px/in. Read by y_min in x [-0.25, 0.25] of the traced outline (tools/trace.py); the end view's outline over the rail's middle: the cross bar's underside (where the drawing's 1.41 in line ends) above the mount's lowest edge
Not published: read off the drawing's end view, where the 1.41 in line ends on the surface that sits on the rail.
Mount clamp's bottom in the optic frame (y, the rail's top is 0)-0.219 in ± 0.01 in -5.6 mmProvisionalWorked out: -{.clamp_below_rail}
Worked out -0.219 in ± 0.01 in used
-{.clamp_below_rail}, harvested
Where the traced outlines' clamp-bottom origin sits in the part's frame.
Left jaw's groove, left of the hood's middle0.442 in ± 0.01 in 11.2 mmProvisionalPhoto: Holosun EU dimensioned drawing, end view from the front (the HOLOSUN panel under the window; the QD lever at the picture's left)
Photo 0.442 in ± 0.01 in used
Holosun EU dimensioned drawing, end view from the front (the HOLOSUN panel under the window; the QD lever at the picture's left), harvested
Scale: scale from holosun-hs510c.width = 1.8 in (x-extent 388 px → 215.6 px/in) and holosun-hs510c.height = 2.31 in (y-extent 495 px → 214.3 px/in), which agree within 0.6%; mean 214.9 px/in. Read by −x_min in x [-0.6, 0] in y [0.1, 0.14] of the traced outline (tools/trace.py); the end view's outline inside the left jaw (the fixed one, the clamp bolt's side): its groove at its deepest, left of the hood's middle
Not published: read off the drawing's end view. The fixed jaw, on the clamp bolt's side.
Right jaw's groove, right of the hood's middle0.391 in ± 0.01 in 9.9 mmProvisionalPhoto: Holosun EU dimensioned drawing, end view from the front (the HOLOSUN panel under the window; the QD lever at the picture's left)
Photo 0.391 in ± 0.01 in used
Holosun EU dimensioned drawing, end view from the front (the HOLOSUN panel under the window; the QD lever at the picture's left), harvested
Scale: scale from holosun-hs510c.width = 1.8 in (x-extent 388 px → 215.6 px/in) and holosun-hs510c.height = 2.31 in (y-extent 495 px → 214.3 px/in), which agree within 0.6%; mean 214.9 px/in. Read by x_max in x [0, 0.45] in y [0.1, 0.14] of the traced outline (tools/trace.py); the end view's outline inside the right jaw (the lever's): its groove at its deepest, right of the hood's middle
Not published: read off the drawing's end view. The lever's jaw, as the drawing has it: closed.
Between the two jaws' grooves (what the clamp holds)0.833 in ± 0.014 in 21.2 mmProvisionalWorked out: {.jaw_left_of_middle} + {.jaw_right_of_middle}
Worked out 0.833 in ± 0.014 in used
{.jaw_left_of_middle} + {.jaw_right_of_middle}, harvested
As the drawing has the clamp: 0.833 in, for a rail that is 0.835 in across (std.picatinny.top_width). It is the drawing's own check of its scale, and why the two grooves are taken as where the rail is held.
The rail's middle in the optic frame (z, the hood's middle is 0)-0.025 in ± 0.01 in -0.6 mmProvisionalWorked out: ({.jaw_right_of_middle} - {.jaw_left_of_middle}) / 2
Worked out -0.0255 in ± 0.01 in used
({.jaw_right_of_middle} - {.jaw_left_of_middle}) / 2, harvested
Midway between the two jaws' grooves: 0.025 in to the left of the hood's middle, by the drawing's end view (5 px of 388). The sight is seated by its jaws, so it stands that far to the right of the rail's middle. If the drawing has the lever's jaw closed further than a rail would let it, the offset is less than this, down to none.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Sight and magnifier
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $272.79 Black Nov 21, 2026, in stock that day
- Primary Arms $272.79 FDE Nov 21, 2026, in stock that day
- Sportsman's Warehouse $272.79 FDE Nov 21, 2026, in stock that day
- KYGUNCO $309.99 Black Nov 21, 2026, in stock that day
- Midwest Gun Works $309.99 Black Nov 21, 2026, in stock that day
- Faxon Firearms $352.93 Black Nov 21, 2026, in stock that day
- Holosun $364.69 Black Nov 21, 2026, in stock that day
- Holosun $364.69 FDE Nov 21, 2026, in stock that day