Frame
Taurus TX22 Gen 2 frame

- Weight
- 6.37 oz ± 1 oz Provisionalworked out: {.pistol_weight} - {taurus-tx22-toro-slide.weight} - {taurus-tx22-barrel-46.weight} - {taurus-tx22-thread-protector.weight} - {taurus-tx22-magazine-16.weight}
- Lowest price
- Sold in the Taurus TX22 Gen 2 T.O.R.O., 22 LR, 4.6 in, Hard Anodized Black, not by itself
- Colour
- Polymer black (placeholder)
- Drawn as
- modelled
- Maker's page
- sportsmans.com
In “Taurus TX22 T.O.R.O.”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The pistol's overall length (the whole T.O.R.O., thread protector on)7.6 in ± 0.005 in 193 mmConflictPublished: Shooting News Weekly, Gun Review: Taurus TX22 T.O.R.O. .22LR Pistol (its specifications list), a review, read Nov 5, 2026
Published “Overall Length 7.6”
Sportsman's Warehouse, Taurus TX22 Gen 2 TORO 22 Long Rifle 4.6in Hard Anodized Black Pistol (MPN 1-2TX22P141), a seller, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “Overall length: 7.60 in.” used
Shooting News Weekly, Gun Review: Taurus TX22 T.O.R.O. .22LR Pistol (its specifications list), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “Overall Length: 7.06"”
American Rifleman, Review: Taurus TX22 Black T.O.R.O. (its specifications box), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “OVERALL LENGTH 7.06 In.”
Gun Tests, Taurus TX22 T.O.R.O. Model Accepts Red Dots (its specifications table), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
The photos decide (CLAUDE.md, a conflict is kept and adopted by what the part has to fit): framed by the two cross pins, the three side views give the frame's rear to the protector's face as 7.51 to 7.59 in at a pin spacing that also puts Blackstone's two rail slots 0.397 apart for the standard's 0.394; at 7.06 the same slots would stand 0.368 apart and the pins 1.26 in. 7.06 is the 4.1 in barrel's size in Taurus's manual as the discovery read it.
sportsmans and rifleman differ by 0.54 in beyond what each states it is good to.
sportsmans and guntests differ by 0.54 in beyond what each states it is good to.
snw and rifleman differ by 0.54 in beyond what each states it is good to.
snw and guntests differ by 0.54 in beyond what each states it is good to.
The pistol's figure, in the root part's ledger for every part to read. Two figures are published: 7.60 (Sportsman's, Shooting News Weekly; Taurus's own page as the discovery read it) and 7.06 (American Rifleman, Gun Tests). Taurus's manual, as the discovery read it (its PDF refusing the reader), lists two sizes, 7.6 and 7.1 in with 4.6 and 4.1 in barrels: 7.06 reads as the shorter one's.
The pistol's overall height5.44 in ± 0.005 in 138.2 mmCorroboratedPublished: Shooting News Weekly, Gun Review: Taurus TX22 T.O.R.O. .22LR Pistol (its specifications list), a review, read Nov 5, 2026
Published “Height: 5.44"”
American Rifleman, Review: Taurus TX22 Black T.O.R.O. (its specifications box), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “Overall Height: 5.44 In.” used
Shooting News Weekly, Gun Review: Taurus TX22 T.O.R.O. .22LR Pistol (its specifications list), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “OVERALL HEIGHT 5.44 In.”
Gun Tests, Taurus TX22 T.O.R.O. Model Accepts Red Dots (its specifications table), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
Three reviews print the one figure (Taurus's own page, refusing the reader, the same by the discovery's reading); Shooting News Weekly's list is the one that also gives 7.60 and 17.30, the T.O.R.O.'s own figures.
To the top of the rear sight, from the bottom of the magazine in it: no page says which magazine. The side views read 5.47 to 5.56 in from the rear sight's top to the flush 16-round magazine's base pad (each taken a little from above, which adds to a height).
The pistol's overall width, at its widest1.25 in ± 0.005 in 31.8 mmCorroboratedPublished: Shooting News Weekly, Gun Review: Taurus TX22 T.O.R.O. .22LR Pistol (its specifications list), a review, read Nov 5, 2026
Published “Width: 1.25"”
American Rifleman, Review: Taurus TX22 Black T.O.R.O. (its specifications box), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “Overall Width: 1.25 In.” used
Shooting News Weekly, Gun Review: Taurus TX22 T.O.R.O. .22LR Pistol (its specifications list), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “OVERALL WIDTH 1.25 In.”
Gun Tests, Taurus TX22 T.O.R.O. Model Accepts Red Dots (its specifications table), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
Three reviews print the one figure; Shooting News Weekly's list is the T.O.R.O.'s (its 7.60 and 17.30).
At its widest point, which the manual (as the discovery read it) says: "1.25" (at widest point)". The ambidextrous safety's two levers are the widest thing on the frame in the oblique views.
The pistol's weight, unloaded (without a magazine)17.3 oz ± 0.005 ozCorroboratedPublished: Shooting News Weekly, Gun Review: Taurus TX22 T.O.R.O. .22LR Pistol (its specifications list), a review, read Nov 5, 2026
Published “Weight 17.3oz”
Sportsman's Warehouse, Taurus TX22 Gen 2 TORO 22 Long Rifle 4.6in Hard Anodized Black Pistol (MPN 1-2TX22P141), a seller, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “Overall Weight: 17.30 oz. (unloaded)” used
Shooting News Weekly, Gun Review: Taurus TX22 T.O.R.O. .22LR Pistol (its specifications list), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “OVERALL WEIGHT 17.30 Oz. (Unloaded)”
Gun Tests, Taurus TX22 T.O.R.O. Model Accepts Red Dots (its specifications table), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
All three say 17.3 oz unloaded; Shooting News Weekly's and Gun Tests' say it to the hundredth.
The pistol's weight with its 16-round magazine (empty)19.7 oz ± 0.05 ozProvisionalPublished: American Rifleman, Review: Taurus TX22 Black T.O.R.O. (its specifications box), a review, read Nov 5, 2026
Published “Weight: 19.7 ozs. (with 16-round magazine)” used
American Rifleman, Review: Taurus TX22 Black T.O.R.O. (its specifications box), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
American Rifleman's figure is the pistol with a magazine in it, not the unloaded figure: kept apart. Less pistol_weight it leaves 2.4 oz for the 16-round magazine, a check for that magazine's own weight.
The accessory rail's length, under the dust cover1.75 in ± 0.005 in 44.4 mmProvisionalPublished: American Rifleman, Review: Taurus TX22 Black T.O.R.O. (its specifications box), a review, read Nov 5, 2026
Published “The dustcover features a molded-in 1.75" accessory rail.” used
American Rifleman, Review: Taurus TX22 Black T.O.R.O. (its specifications box), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
The front cross pin's centre ahead of the rear one (the origin), along the slide's travel1.355 in ± 0.012 in 34.4 mmProvisionalPhoto: Blackstone's right side; Sportsman's left and right
Photo 1.355 in ± 0.012 in used
Blackstone's right side; Sportsman's left and right, harvested
Scale: the pistol's published overall length (7.60, pistol_overall_length) from the frame's rearmost point to the thread protector's front face: 2440, 1186 and 1179 px. Read by the pins' centres picked on 2.5x and 4x crops (the dark ring round each pin's end); their distance at each photo's overall-length scale: 1.354 (Blackstone), 1.365 (left), 1.351 (right). The ± covers the three and a pixel at each pin; Blackstone's rail (two slots 127.5 px apart at 321 px/in: 0.397 for the standard's 0.394) agrees.
The pin frame's scale. The two pins' ends show on both sides of the frame under the slide, the rear one behind the trigger at the origin. Every photo is framed by the two (trace.py method frame), so a part traced from any of them is in one frame.
The front cross pin's centre above the rear one, square to the slide's travel0.03 in ± 0.005 in 0.8 mmProvisionalPhoto: a photo on file
Photo 0.03 in ± 0.005 in used
a photo on file, harvested
Scale: front_pin_x. Read by the pins' line against a line fitted to the slide's lower edge along the frame (the lit edge of the frame's top in the two black views, the OD green's top edge in Blackstone's, over 5 to 7 in): 4.6 px over 214 (left), 4.6 over 212 (right), 10.2 over 433 (Blackstone): 0.029, 0.029, 0.032 in
The line through the two pins rises toward the muzzle against the slide's lower edge (the frame's top along its side, where the slide rides): the pin frame's x is along that edge, not along the pins.
The frame's top along its side faces, where the closed slide's lower edge meets it, above the origin0.165 in ± 0.008 in 4.2 mmProvisionalPhoto: a photo on file
Photo 0.165 in ± 0.008 in used
a photo on file, harvested
Scale: the pin frame (front_pin_x, front_pin_y). Read by the slide's lower edge over the rear pin, on the frame's near face as the pin is (so a view from above moves both alike): 0.165 (Blackstone, the OD green's top), 0.162 (left), 0.171 (right)
The bore axis's height above the frame's origin0.467 in ± 0.03 in 11.9 mmProvisionalPhoto: a photo on file
Photo 0.467 in ± 0.03 in used
a photo on file, harvested
Scale: the pin frame (front_pin_x, front_pin_y). Read by the protector's silhouette's middle (its top and bottom edges over 45 to 70 columns: 92 and 93.5 px across) carried to the rear pin's column along the slide's lower edge: 0.460 (left) and 0.467 (right). Blackstone's reads 0.578: it is taken from about 11 degrees above (its cover plate's top and the trigger guard's top face show), and the pin, on the near face 0.48 in from the middle plane, stands about 0.09 lower in it than the bore's middle would at the same height: 0.49 less that. The ± covers the three and what the two black views' small elevation may add (the pins on the near face, the bore on the middle plane).
Onboarding checklist: Side view, scaled by the pistol's published sizes: the barrel's muzzle (its thread protector's) centre against the origin pin's. It is where the slide, the barrel and whatever is on the muzzle line up. Read on the thread protector's middle (the middle of its silhouette over its length, a turned part on the bore), carried back to the rear pin along the slide's lower edge.
Where a closed slide's rear face stands, from the origin-2.75 in ± 0.03 in -69.8 mmProvisionalPhoto: a photo on file
Photo -2.75 in ± 0.03 in used
a photo on file, harvested
Scale: the pin frame (front_pin_x, front_pin_y). Read by the silhouette's rearmost point on the rows 0.4 to 0.6 above the origin (the slide's rear face, behind nothing of the frame there), at the bore axis's height: -2.766 (Blackstone), -2.735 (left). Sportsman's right reads -2.668: it is yawed (its pins stand 0.05 to 0.07 forward of its outline against the other two), and is left out.
Onboarding checklist: Side view of the pistol closed: the slide's rear face against the origin pin. Each part's half of the seat: the frame states where, the slide has its origin there. The face leans (its top about 0.2 of its height ahead of its foot, 11 degrees): read at the bore axis's height.
The frame's rearmost point, from the origin-2.894 in ± 0.025 in -73.5 mmProvisionalPhoto: a photo on file
Photo -2.894 in ± 0.025 in used
a photo on file, harvested
Scale: the pin frame (front_pin_x, front_pin_y). Read by the silhouette's rearmost point (the grip's back at 3.4 to 3.6 in under the origin): -2.894 (Blackstone, OD green), -2.914 (left); the tang over the web -2.85 (Blackstone at 0.2 under the origin)
Onboarding checklist: Side view: the tang behind the grip, the overall length's rear end. On the TX22 the rearmost point is the back of the grip low down (the swell 3.4 to 3.7 in under the origin), 0.05 in behind the tang over the web.
The grip's bottom face, where a magazine's base pad bears-4.024 in ± 0.02 in -102.2 mmProvisionalPhoto: Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background
Photo -4.024 in ± 0.02 in used
Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by the face's lowest stretch over the pad's span (-4.046 from x -2.46 to -2.19, the OD green's lower edge at the half level of its fall to the pad's black: rows 1712 to 1717) carried to magwell_x at the pad's rise of 1.0 degree: -4.046 + 1.25 x tan(1.0) = -4.024 (the pad's rear end at -2.39, its nose at pad_nose_x less its length). The ± covers the rise's own (0.9 degree over 1.25 in) and a pixel and a half.
Onboarding checklist: Side view: the grip's lower edge at the magazine's front, against the origin pin. The grip's bottom face (profiles.side, the OD green's lower edge over the black pad) runs nearly level over the pad, lowest at its rear (grip_bottom_low, x -2.46 to -2.19), rising about a degree and a half to x -1.2 and then rounding up into the front strap (-3.98 at x -0.97, -3.93 at -0.86). The pad's top bears on the face's lowest stretch and stands under its front round, as Blackstone's picture has it (a dark gap over the pad's nose): this is that face's line at magwell_x, the lowest stretch carried forward at the pad's own rise (taurus-tx22-magazine-16.pad_top_rise, 1.0 degree). Until 2026-11-05 21:47 it was the round's own height there (-3.98), which stood a magazine's pad 0.04 in up into the frame at its rear.
The grip's bottom face at its lowest over a magazine's pad (its rear stretch, ahead of the heel)-4.046 in ± 0.01 in -102.8 mmProvisionalPhoto: Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background
Photo -4.046 in ± 0.01 in used
Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by profiles.side's lower edge from x -2.46 to -2.19 (the stretch between the heel's front face and the face's step up at -2.14)
The front of a seated magazine's body at the grip's bottom-1.144 in ± 0.03 in -29.1 mmProvisionalWorked out: {.pad_nose_x} - {taurus-tx22-magazine-16.pad_front_ahead}
Worked out -1.144 in ± 0.03 in used
{.pad_nose_x} - {taurus-tx22-magazine-16.pad_front_ahead}, harvested
The nose at -0.76 less its 0.384 ahead of the body: the front wall is then 0.20 thick 3.6 in under the origin and the pad's rear end 0.07 ahead of the heel's front face, where the photo has it (-2.47).
Onboarding checklist. The magazine's body is inside the grip: what shows is the base pad's nose ahead of it (pad_nose_x), and the magazine's owner reads how far the nose stands ahead of the body's front on photos of the magazine alone (taurus-tx22-magazine-16.pad_front_ahead). Until 2026-11-05 22:15 an assumption (-0.97: the front strap's foot less a 0.12 wall), which left the well's front wall 0.03 thick 3.6 in under the origin and broke through the front strap's round at its corners (a white triangle beside the pad in the front-quarter render), and stood the pad's nose 0.17 ahead of where Blackstone's photo has it.
A seated magazine's base pad: its nose at the pad's top, ahead of the origin-0.76 in ± 0.02 in -19.3 mmProvisionalPhoto: Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background
Photo -0.76 in ± 0.02 in used
Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by the black pad's front edge under the grip's front round (the flush 16-round in the photo), at the pad's top: -0.76; at its foot -0.74
The magazine well's lean: its front wall from upright, top toward the muzzle14.5° ± 1.5°ProvisionalPhoto: Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background
Photo 14.5 deg ± 1.5 deg used
Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by the OD green's front edge between 2.0 and 3.6 in under the origin (-0.435 at -2.0, -0.541 at -2.4, -0.852 at -3.6): 14.6 and 14.5 degrees over the two stretches
The magazine goes in along the grip: the front strap's outer face is the reading (its inner wall taken to be parallel).
The grip's middle along the pistol, at grip_y (where the firing hand holds it)-1.75 in ± 0.05 in -44.4 mmProvisionalPhoto: Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background
Photo -1.75 in ± 0.05 in used
Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by midway between the grip's front strap (-0.66) and back strap (-2.85) at grip_y
The grip's middle height (where the firing hand holds it)-2.85 in ± 0.05 in -72.4 mmProvisionalPhoto: Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background
Photo -2.85 in ± 0.05 in used
Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by midway between the frame's underside behind the trigger guard, where the front strap begins (-1.7), and the grip's bottom face (-4.0)
How many slots the rail under the dust cover has2ProvisionalPhoto: a photo on file
Photo 2 count used
a photo on file, harvested
Scale: none needed. Read by the gaps in the rail's lower edge, counted: two in every side view and in both obliques from the front
The rail's rear slot's centre, ahead of the origin3.489 in ± 0.01 in 88.6 mmProvisionalPhoto: Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background
Photo 3.489 in ± 0.01 in used
Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by the rear slot's two walls where the silhouette's alpha crosses a half, on three rows just above the rail's face: 2042.9 and 2108.3 px (65.4 px, 0.204 in for the standard's 0.206); the middle at x 3.489. The front slot's front wall shows a lit face (the slot seen a little from ahead), so it is placed by its rear wall: 3.885 for the pitch's 3.883.
The second slot is a pitch (std.picatinny.slot_pitch) ahead: Blackstone's two rear edges are 127.3 px apart, 0.3965 in for the standard's 0.394.
The rail's mounting face (its top, turned down under the dust cover), above the origin-0.566 in ± 0.012 in -14.4 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200
Photo -0.566 in ± 0.012 in used
Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 735.0, 372.0 and the front at 520.8, 367.0, 158.8 px/in. Read by profiles.left's lower edge on the rail's teeth between the slots (x 2.8 to 3.2: -0.567, -0.565), grey under 150
Photo -0.561 in ± 0.012 in
Blackstone Shooting: the OD green T.O.R.O. from its right, 2500 x 1844, harvested
Scale: the pin frame: the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by the silhouette's lower edge (alpha a half) on the teeth, -0.535 between the slots, less what the view's height above the pistol lifts an edge 0.137 in nearer the middle than the pins (the rail head's lower corner at 0.328 off the middle, the pins at 0.465): 0.026, at the 11 degrees the bore's reading gives (13 by this edge and the left view's)
The left view is nearly level (no screw head of the cover plate is seen from above); Blackstone's needs a correction for its height, which brings it within 0.005.
Blackstone's view, taken from above, has the rail's face 0.03 in higher than the near-level left view: its lower corner stands 0.14 in nearer the middle plane than the pins it is framed by, and a view from 13 degrees above lifts it that much. The left view's reading is adopted, the other corrected for it beside it.
The rail's front end (the front tooth's front face), ahead of the origin4.068 in ± 0.012 in 103.3 mmProvisionalPhoto: Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background
Photo 4.068 in ± 0.012 in used
Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by where the silhouette's lower edge leaves the front tooth (column 2262); the dust cover's front face then rises at a slant to the slide's front (column 2286)
How far each lever of the manual safety stands out from the frame's side face0.16 in ± 0.03 in 4.1 mmProvisionalWorked out: ({.pistol_width} - {.body_width}) / 2
Worked out 0.16 in ± 0.03 in used
({.pistol_width} - {.body_width}) / 2, harvested
The published widest point (pistol_width) is taken to be across the safety's two levers: they are the widest thing on the frame in both obliques from the front.
The frame's width across its side faces under the slide (the dust cover, over the trigger, the tang)0.93 in ± 0.06 in 23.6 mmProvisionalWorked out: {taurus-tx22-toro-slide.width}
Worked out 0.93 in ± 0.06 in used
{taurus-tx22-toro-slide.width}, harvested
No view on file is square across the frame. In both obliques from the front (7c0111a45816 along the seam over the trigger and at the rear, d4f6e257c86f at the rear under the safety's lever) the slide's side runs down into the frame's with no ledge between them: the frame is taken as wide as the slide there, which its owner reads in the right oblique against the thread protector's front face (taurus-tx22-toro-slide.width).
The grip's width across its sides at its widest (its foot and up its panels)1.115 in ± 0.025 in 28.3 mmConflictWorked out: {taurus-tx22-magazine-22.sleeve_width}
Worked out 1.115 in ± 0.025 in used
{taurus-tx22-magazine-22.sleeve_width}, harvested
Flush with the grip's foot in Taurus's picture of the 22-round seated.
Worked out 1.186 in ± 0.029 in
{taurus-tx22-magazine-16.pad_width}, harvested
A hair proud of the grip's sides in Handguns' view from below.
Taurus's own picture, made to show the fit, has the sleeve's side face flush with the grip's foot; Handguns' has the pad a little proud of it.
sleeve and pad differ by 0.071 in beyond what each states it is good to.
No view on file is square across the frame. The magazine's base is flush with the grip's sides seated: Taurus's own picture of the 22-round in a TX22 (taurus-tx22-magazine-22 c3fd2bc09052, "to display proper magazine fit") has the sleeve's side face run on from the grip's foot, and Handguns' view of the 16-round's pad from below (taurus-tx22-magazine-16 9e7b75ff19e1) the pad's sides with the grip's, a hair proud. The grip is taken as wide as the sleeve, the magazines' owner's reading of Taurus's end view, the pad's kept beside it. Until 2026-11-05 22:25 an assumption of the slide's width (0.93), which left the pad standing out of each side by 0.13. Above the panels the frame narrows to body_width (the model eases between y -0.95 and -0.45).
The trigger guard's bars' width across0.4 in ± 0.08 in 10.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the guard's bars are seen only from their sides and, from above, their top faces in Blackstone's view (taken from about 11 degrees above), where the lower bar's top face shows 0.03 to 0.04 in of its depth.
Worked out 0.4 in ± 0.08 in used
An assumption for the drawing, not a reading: the guard's bars are seen only from their sides and, from above, their top faces in Blackstone's view (taken from about 11 degrees above), where the lower bar's top face shows 0.03 to 0.04 in of its depth.
The trigger shoe's width across0.3 in ± 0.05 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: the trigger is seen only from its sides; in the obliques its face is turned away.
Worked out 0.3 in ± 0.05 in used
An assumption for the drawing, not a reading: the trigger is seen only from its sides; in the obliques its face is turned away.
The radius the grip's front and back straps are rounded to, across the grip0.3 in ± 0.1 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: in both obliques the front strap reads as a broad round from one side to the other with no flat face of its own, and the back strap rounds into the sides behind the panels; no view looks along either.
Worked out 0.3 in ± 0.1 in used
An assumption for the drawing, not a reading: in both obliques the front strap reads as a broad round from one side to the other with no flat face of its own, and the back strap rounds into the sides behind the panels; no view looks along either.
The radius the frame's corners are rounded to elsewhere (the dust cover's front corners, the tang's)0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the dust cover's front corners and the tang's read rounded and small in the close views from the front (e546d93843c1) and of the rear (b2ff2ae9a5cd).
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: the dust cover's front corners and the tang's read rounded and small in the close views from the front (e546d93843c1) and of the rear (b2ff2ae9a5cd).
The dust cover's underside beside the rail's head, above the origin-0.381 in ± 0.012 in -9.7 mmProvisionalPhoto: Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background
Photo -0.381 in ± 0.012 in used
Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by the line along the dust cover's side over the rail's teeth, where the side face's lower edge meets the rail's head (row 550, x 3.3 to 4.0): -0.373, less what the view's height lifts an edge on the stepped-in band's face, 0.04 nearer the middle than the pins (0.008)
The rail's head hangs under it (std.picatinny.lower_gauge_below_top above the rail's face is 0.154: -0.381), narrower than the dust cover.
How far the disassembly latch's ends, the magazine release's buttons and the slide stop stand out from the frame's side faces0.05 in ± 0.03 in 1.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: each shows from its side only; in the obliques they stand a little proud of the frame's side, less than the safety's levers.
Worked out 0.05 in ± 0.03 in used
An assumption for the drawing, not a reading: each shows from its side only; in the obliques they stand a little proud of the frame's side, less than the safety's levers.
The cross pins' bright ends' diameter, on the frame's side faces0.065 in ± 0.015 in 1.7 mmProvisionalPhoto: Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background
Photo 0.065 in ± 0.015 in used
Blackstone Shooting: a T.O.R.O. with an OD green frame from its right, the muzzle at the right, 2500 x 1844, alpha background, harvested
Scale: the pin frame (front_pin_x, front_pin_y): the rear pin at 962.0, 430.8 and the front at 1395.2, 425.2, 321.1 px/in. Read by the bright end inside each pin's dark ring on a 2.5x crop: about 20 px across (the ring round it about 30 px, 0.094 in)
The magazine well's width across the grip0.64 in ± 0.02 in 16.3 mmProvisionalWorked out: {taurus-tx22-magazine-16.body_width}
Worked out 0.64 in ± 0.02 in used
{taurus-tx22-magazine-16.body_width}, harvested
No view looks into the well: it is cut to the magazine's own body (its width read by the magazine's owner on Taurus's end view of the 22-round, whose body the 16-round's is), with the model's clearance round it. Until 2026-11-05 21:47 an assumption of 0.62.
How far the grip's stippled panels lie below the smooth borders round them0.012 in ± 0.008 in 0.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the borders round the panels read raised in the close view of the grip (0c6d81d099f9) and in Blackstone's side view, by an amount no view gives; sunk this much the panels' edge shows at the size the page draws a pistol.
Worked out 0.012 in ± 0.008 in used
An assumption for the drawing, not a reading: the borders round the panels read raised in the close view of the grip (0c6d81d099f9) and in Blackstone's side view, by an amount no view gives; sunk this much the panels' edge shows at the size the page draws a pistol.
How deep the indentations over the trigger guard are sunk into the frame's sides0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: their outline shows in Blackstone's side view by its shadowed edge, their depth in no view.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: their outline shows in Blackstone's side view by its shadowed edge, their depth in no view.
How far the dust cover's lower band is stepped in along each side0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the step shows in Blackstone's side view as a shadowed line and in the close view from the front (e546d93843c1) as a ledge, its depth in neither.
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: the step shows in Blackstone's side view as a shadowed line and in the close view from the front (e546d93843c1) as a ledge, its depth in neither.
The trigger guard's lower bar's top (the opening's floor), above the origin-1.595 in ± 0.01 in -40.5 mmConflictPhoto: Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200
Photo -1.595 in ± 0.01 in used
Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200, harvested
Scale: the pin frame (front_pin_x, front_pin_y), 158.8 px/in. Read by where a line down the frame at x 0.7, 1.0, 1.3 and 1.6 goes from the background into the bar (grey under 150): -1.598, -1.598, -1.592, -1.592
Photo -1.617 in ± 0.01 in
Sportsman's Warehouse 1883977-1: the black T.O.R.O. from its right, 1200 x 1200, harvested
Scale: the pin frame: the rear pin at 452.5, 382.5 and the front at 664.5, 374.5, 157.2 px/in. Read by the same lines: -1.620, -1.612, -1.616, -1.622
The left view's frame agrees with Blackstone's at the pins and the grip's foot (0.02 in) where the right view is yawed; the right is kept as the check, 0.022 apart.
left and right differ by 0.022 in beyond what each states it is good to.
Blackstone's view, from above, sees the bar's top face and has its far edge for the opening's floor, 0.13 in higher (-1.468); the two black views, nearly level, have the bar's edge. The model moves its outline's floor here.
The trigger guard's lower bar's bottom, above the origin-1.771 in ± 0.01 in -45 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200
Photo -1.771 in ± 0.01 in used
Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200, harvested
Scale: the pin frame (front_pin_x, front_pin_y), 158.8 px/in. Read by where the same lines leave the bar into the background: -1.774, -1.774, -1.768, -1.768
Photo -1.791 in ± 0.01 in
Sportsman's Warehouse 1883977-1: the black T.O.R.O. from its right, 1200 x 1200, harvested
Scale: the pin frame, 157.2 px/in. Read by the same lines: -1.792, -1.790, -1.790, -1.794
As guard_bar_top_y: the right view kept as the check, 0.02 apart.
Blackstone's outline has it at -1.70: the bar's near lower edge stands 0.27 in nearer the middle than the pins it is framed by, and the view's height lifts it. The model moves its outline's bar here.
How much lower the trigger stands than Blackstone's view draws it-0.07 in ± 0.02 in -1.8 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200
Photo -0.07 in ± 0.02 in used
Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200, harvested
Scale: the pin frame, 158.8 px/in. Read by the trigger's tip, its lowest dark pixel ahead of the guard's floor (about x 0.98, y -1.40), against Blackstone's (x 1.085, y -1.33); the pin's bright end through the trigger likewise (-0.770 left, -0.702 Blackstone). Their x differs by 0.1 at the tip and 0.02 at the pin: the tip isn't moved along
The trigger's sides are 0.15 in off the middle, 0.31 nearer it than the pins Blackstone's view is framed by, and the view's height lifts them: its tip reads -1.33 there and -1.40 in the left view. The model takes Blackstone's outline of the trigger (the only one told from the frame by its colour) this much lower.
The trigger's pin, its bright end on the trigger's side, ahead of the origin0.499 in ± 0.012 in 12.7 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200
Photo 0.499 in ± 0.012 in used
Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200, harvested
Scale: the pin frame (front_pin_x, front_pin_y), 158.8 px/in. Read by the bright end's middle on a 12x crop (655.8, 494.2); Blackstone's has it at 0.515 (1126.5, 656.9 on an 8x crop)
The trigger's pin above the origin-0.77 in ± 0.012 in -19.6 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200
Photo -0.77 in ± 0.012 in used
Sportsman's Warehouse 1883977-2: the black T.O.R.O. from its left, 1200 x 1200, harvested
Scale: the pin frame (front_pin_x, front_pin_y), 158.8 px/in. Read by as trigger_pin_x; Blackstone's reads -0.702, lifted by its height as the trigger is (trigger_drop)
The trigger's pin's bright end, across0.11 in ± 0.02 in 2.8 mmProvisionalPhoto: Blackstone Shooting: the OD green T.O.R.O. from its right, 2500 x 1844
Photo 0.11 in ± 0.02 in used
Blackstone Shooting: the OD green T.O.R.O. from its right, 2500 x 1844, harvested
Scale: the pin frame, 321.1 px/in. Read by the bright disc with its rim on an 8x crop, 36 px across (the left view's 0.08 to 0.115 by its dark ring)
Width across the frame's grip1.115 in ± 0.025 in 28.3 mmProvisionalWorked out: {.grip_width}
Worked out 1.115 in ± 0.025 in used
{.grip_width}, harvested
Onboarding checklist: A view from the front or the rear, or a camera fitted to an oblique; the published overall width is at the widest point (its controls). No such view is on file: grip_width's assumption.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
TX22 slide on its frame
TX22 magazine in its grip
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount