Backup sight
Magpul MBUS Pro Sight – Rear
Magpul's MBUS Pro rear sight: an all-steel folding backup sight for a Picatinny rail, with tool-less windage and a small aperture on a plate that flips down to leave a large one. Black.

- Weight
- 1.8 oz ± 0.005 oz Conflictpublished: Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications, the maker, read Oct 5, 2026Its sources span 1.76 oz to 1.8 oz.
- Lowest price
- $79.99 at KYGUNCO, read Nov 21, 2026
- Maker's number
- MAG276
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- magpul.com
In “Aero 5.56 carbine, fitted out”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length along the rail (folded, where it folds)2.1 in 53.3 mmConfirmedPublished: Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications; its Features say "Stowed footprint covers 2.1” of rail", the maker, read Oct 5, 2026
Published “Length, stowed 2.1 in.” used
Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications; its Features say "Stowed footprint covers 2.1” of rail", the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Rear Length: 2.08 in / 52.8 mm (stowed)”
Recoil, Back-up Iron Sights Buyer's Guide (Rob Curtis, 2015-12-28), Magpul MBUS Pro table (who measured, and how, unstated), a review, read Oct 5, 2026 the page, harvested Oct 5, 2026
The maker's figure; the review's 2.08 in is inside its last digit.
Folded: from the base's front face to the folded arm's rear tip ("Stowed footprint covers 2.1” of rail"). Standing it is the base alone (clamp_length) and, behind it, what the arm and the windage knob overhang it by: 0.08 in.
Height above the rail's top, folded (a fixed sight: its height)0.38 in 9.7 mmConflictPublished: Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications; its Features say "Standard AR sight height when deployed and 0.38" when stowed", the maker, read Oct 5, 2026
Published “Height above rail, stowed ~0.38 in.” used
Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications; its Features say "Standard AR sight height when deployed and 0.38" when stowed", the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Height above rail, stowed, at mid-point: ~0.37"”
Wing Tactical, Magpul Back Up Rear Sight (MBUS) Pro (MAG276), Specifications (Magpul's older text: AR15Discounts and Midwest Gun Works print the same line), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Rear Height: 0.36 in / 9.1 mm (stowed)”
Recoil, Back-up Iron Sights Buyer's Guide (Rob Curtis, 2015-12-28), Magpul MBUS Pro table (who measured, and how, unstated), a review, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 0.37 in ± 0.012 in
US D704,792 S, Magpul, FIG. 3 front elevation, folded; the patent office's copy, page 5, 300 dpi, harvested
Scale: the figure's width as the plan's (.width, itself by the stowed length): 1288 px, 922.0 px/in. Read by the top of the rib that carries the windage pointer, on the sight's centre line (row 924), above the channel's roof (row 1265): 341 px. The folded arm's flat top is 0.341 in above the rail by the side elevation, the base's top 0.332
The maker's current figure. Its older ~0.37 in ("at mid-point") is within the last digit of it, and the patent's centre-line top, scaled by the stowed length, reads 0.370; the review's 0.36 isn't within its digit, and states no method.
magpul and recoil differ by 0.02 in beyond what each states it is good to.
From the rail's top ("Height above rail"), not the clamp's bottom. To what, Magpul's page doesn't say; its older wording, which sellers still print, is "at mid-point", and on the patent the sight's top on its centre line (the rib that carries the windage pointer) is 0.370 in above the rail. The folded arm's flat top is lower (0.34), and two things off the centre line are higher: the ear beside the windage knob (0.40) and the knob's own top (0.43, knob_top_above_rail).
Width1.397 in ± 0.03 in 35.5 mmProvisionalPhoto: US D704,792 S (Magpul, 'Folding rear sight for a firearm'), FIG. 7 top plan, folded; the patent office's copy, page 7, 300 dpi
Photo 1.397 in ± 0.03 in used
US D704,792 S (Magpul, 'Folding rear sight for a firearm'), FIG. 7 top plan, folded; the patent office's copy, page 7, 300 dpi, harvested
Scale: scale from magpul-mbus-pro-rear.length = 2.1 in (x-extent 1919 px → 913.8 px/in). Read by height of the traced outline (tools/trace.py); the top plan's extent across the rifle, from the clamp screw's head (left) to the windage knob's outer face (right): both stand out of the body's sides. ± covers the length's last digit and a design patent's fidelity
Onboarding checklist: Manufacturer spec table.
Height above the rail's top, standing1.633 in ± 0.02 in 41.5 mmProvisionalWorked out: {.hinge_above_rail} + {.arm_tip_from_hinge}
Worked out 1.633 in ± 0.02 in used
{.hinge_above_rail} + {.arm_tip_from_hinge}, harvested
Not published. The arm's tip with the arm turned up square to the rail about its hinge: the patent's figures, scaled by the stowed length. Magpul's photo of it standing from behind (acc7c896d80c), scaled by the aperture's published height, reads about 1.62 by eye; it hasn't been traced.
Sight line above the rail's top (the aperture's centre, the post's tip)1.42 in 36.1 mmConfirmedPublished: Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications, Other Specs, the maker, read Oct 5, 2026
Published “Aperture height over rail: 1.42 in.” used
Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications, Other Specs, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “STOWED HEIGHT OF ONLY 0.38" KEEPS YOUR BACKUP OUT OF SIGHT; STANDARD AR SIGHT HEIGHT (1.41” ABOVE RAIL) WHEN DEPLOYED”
Magpul, MBUS Pro Sight – Rear (MAG276), a feature heading on the same page (the figure sellers still print: Wing Tactical, Primary Arms, Midwest Gun Works "Aperture height over rail: 1.41""), the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Worked out 1.415 in ± 0.02 in
{.hinge_above_rail} + {.aperture_from_hinge}, harvested
The patent's figures, scaled by the stowed length, with the arm turned up square to the rail: the hinge's height and the aperture's distance from the hinge. An independent check of the published figure, and of the scale.
The specification table's row, which names what is measured (the aperture's height over the rail); the heading's 1.41 is the older figure and differs by its last digit. The patent, scaled by the stowed length, gives 1.415.
The aperture's centre over the rail's top with the sight standing ("Aperture height over rail"). Magpul's page gives it twice: 1.42 in. in its specifications and 1.41” in a feature heading; the two are within each other's last digit.
Clamp's length along the rail0.819 in ± 0.015 in 20.8 mmProvisionalPhoto: US D704,792 S (Magpul, 'Folding rear sight for a firearm'), FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi
Photo 0.819 in ± 0.015 in used
US D704,792 S (Magpul, 'Folding rear sight for a firearm'), FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi, harvested
Scale: scale from magpul-mbus-pro-rear.length = 2.1 in (x-extent 1854 px → 882.9 px/in). Read by −x_min in y [0.03, 0.17] of the traced outline (tools/trace.py); the base along the rail: its front face to the jaws' rear end, read on the rows below the folded arm
Onboarding checklist: A straight side view scaled by a published size: the base's two ends. `clamp_rear` and `clamp_front` read it (half each way about the frame's origin).
Small aperture's diameter0.07 in 1.8 mmConfirmedPublished: Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications, Other Specs, the maker, read Oct 5, 2026
Published “Small aperture dia.: 0.07 in.” used
Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications, Other Specs, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Large aperture's diameter0.19 in 4.8 mmConfirmedPublished: Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications, Other Specs, the maker, read Oct 5, 2026
Published “Large aperture dia.: 0.19 in.” used
Magpul, MBUS Pro Sight – Rear (MAG276), Technical Specifications, Other Specs, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Clamp's jaws below the rail's top0.211 in ± 0.01 in 5.4 mmProvisionalPhoto: US D704,792 S, Magpul, FIG. 3 front elevation, folded; the patent office's copy, page 5, 300 dpi
Photo 0.211 in ± 0.01 in used
US D704,792 S, Magpul, FIG. 3 front elevation, folded; the patent office's copy, page 5, 300 dpi, harvested
Scale: the figure's width as the plan's (.width, itself by the stowed length): 1288 px, 922.0 px/in. Read by the channel's roof between the jaws (row 1265, stroke centre) to the fixed jaw's hook bottom (row 1459.5): 194.5 px
Sets the rail's top in the side and end views. The channel's roof is the lower of two parallel lines (the upper, 11 px above, is the break on its front edge); the clamp screw's lowest line is 0.12 in below it, the depth of a rail's slot (std.picatinny.slot_depth, 0.118).
Clamp's bottom in the sight's frame (y, the rail's top is 0)-0.211 in ± 0.01 in -5.4 mmProvisionalWorked out: -{.clamp_below_rail}
Worked out -0.211 in ± 0.01 in used
-{.clamp_below_rail}, harvested
Where the side and end profiles' origin (the jaws' bottom) sits in the part frame.
Base's front face ahead of the clamp's middle (x)0.409 in ± 0.01 in 10.4 mmProvisionalWorked out: {.clamp_length} / 2
Worked out 0.409 in ± 0.01 in used
{.clamp_length} / 2, harvested
Where the side and plan profiles' origin (the base's front face) sits in the part frame.
Windage knob's outer face from the sight's centre line (z, to the rifle's right)0.74 in ± 0.008 in 18.8 mmProvisionalPhoto: US D704,792 S, Magpul, FIG. 7 top plan, folded; the patent office's copy, page 7, 300 dpi
Photo 0.74 in ± 0.008 in used
US D704,792 S, Magpul, FIG. 7 top plan, folded; the patent office's copy, page 7, 300 dpi, harvested
Scale: the figure's own length as the stowed length (.length): 1919 px, 913.8 px/in. Read by the arm's centre line (column 1209: the aperture's rings and the logo's ring fitted, the arm's outline mirrored) to the knob's outer face (column 1885.5, stroke centre): 676.5 px. The front elevation reads 0.740 (the index rib's middle, column 1331, to the knob's face, column 649, at 922.0 px/in) and the bottom plan 0.741
The centre line is the arm's: the aperture's and the logo's centres and the knuckle's middle in the plan, the index rib's and the body's middle in the front elevation. The middle between the jaws' apexes is 0.01 in nearer the knob (the loose bar is drawn 0.03 in open). The clamp screw's head stands as far to the left as the width leaves: 0.657 in.
Hinge's axis above the rail's top0.187 in ± 0.012 in 4.7 mmProvisionalPhoto: US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi
Photo 0.187 in ± 0.012 in used
US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi, harvested
Scale: the figure's own length as the stowed length (.length): 1854 px, 882.9 px/in. Read by the knob's centre (a circle fitted through its lobes' tips: row 795.5 on the sheet, rms 1.3 px) above the jaws' bottom (row 1147): 351.5 px, 0.398 in, less clamp_below_rail (0.211). The front elevation reads 0.187 (the knob's middle, row 1093, above the channel's roof, row 1265, at 922.0 px/in)
The windage screw is the hinge: the knob's centre in the side elevation.
Hinge's axis behind the base's front face0.654 in ± 0.01 in 16.6 mmProvisionalPhoto: US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi
Photo 0.654 in ± 0.01 in used
US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi, harvested
Scale: the figure's own length as the stowed length (.length): 1854 px, 882.9 px/in. Read by the knob's centre (column 1378.0 on the sheet) behind the front face (column 800.5): 577.5 px. The plan reads 0.656 (the knob's middle, 1368.5, behind the front face, 769, at 913.8 px/in)
Aperture's centre from the hinge's axis (along the arm)1.228 in ± 0.015 in 31.2 mmProvisionalPhoto: US D704,792 S, Magpul, FIG. 7 top plan, folded; the patent office's copy, page 7, 300 dpi
Photo 1.228 in ± 0.015 in used
US D704,792 S, Magpul, FIG. 7 top plan, folded; the patent office's copy, page 7, 300 dpi, harvested
Scale: the figure's own length as the stowed length (.length): 1919 px, 913.8 px/in. Read by the aperture's centre (its rings fitted: row 2490.9 on the sheet, rms 0.5 px) behind the hinge's axis (the knob's and the thread's middle, row 1368.5): 1122.4 px. The innermost ring is 65.1 px across, 0.071 in: the small aperture Magpul gives as 0.07
With hinge_above_rail this is the sight line standing, if the arm stands square to the rail: 1.415 in, against Magpul's 1.42 (and 1.41).
Arm's tip from the hinge's axis1.446 in ± 0.015 in 36.7 mmProvisionalPhoto: US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi
Photo 1.446 in ± 0.015 in used
US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi, harvested
Scale: the figure's own length as the stowed length (.length): 1854 px, 882.9 px/in. Read by the folded arm's rear tip (column 2654.5 on the sheet) behind the knob's centre (1378.0): 1276.5 px. The plan reads 1.443 (2687 less 1368.5, at 913.8 px/in)
Windage knob's top above the rail's top0.432 in ± 0.012 in 11 mmProvisionalPhoto: US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi
Photo 0.432 in ± 0.012 in used
US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi, harvested
Scale: the figure's own length as the stowed length (.length): 1854 px, 882.9 px/in. Read by the knob's circle (through its lobes' tips, r 215.9 px, 0.2445 in) above its centre: hinge_above_rail + 0.2445. The front elevation reads 0.425 (the knob's top, row 873, above the roof, row 1265)
The folded sight's highest point, off to the right of its centre line: 0.05 in over the stowed height Magpul gives.
Depth of the shallow recesses drawn (the logo's panel, the plate's window, the pockets)0.03 in ± 0.02 in 0.8 mmProvisionalPhoto: Dirty Bird's copy of Magpul's studio photo, the sight standing, from the front and above, 2000 x 2000
Photo 0.03 in ± 0.02 in used
Dirty Bird's copy of Magpul's studio photo, the sight standing, from the front and above, 2000 x 2000, harvested
Scale: the logo panel's own narrow end, 0.243 in in the patent's plan, 205 px across in the photo (844 px/in); its 0.452 in length shows 300 px, so the face is seen from about 38 degrees above its normal. Read by the panel's upper wall shows 35 ± 8 px tall: 0.067 in if the wall is square to the face, 0.030 if it slopes at 45 degrees, 0.011 if it slopes as far as the patent's double line draws its rim (0.044 in). The middle reading, ± the spread
No orthographic view gives a recess's depth. One oblique product photo bounds the logo panel's: this figure is used for every recess the model cuts, and the pockets between the ribs on the real arm are deeper than it.
Lobes round the windage knob10ProvisionalPhoto: US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi
Photo 10 count used
US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi, harvested
Scale: none: a count. Read by the knob's outline on rays from its centre: lobes (r 216 to 218 px) and gaps (r 199 to 200 px) alternate every 36 degrees over the clear arc (three whole periods): ten to the turn, one of them pointing straight forward
Clamp screw's axis behind the base's front face0.237 in ± 0.012 in 6 mmProvisionalPhoto: US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi
Photo 0.237 in ± 0.012 in used
US D704,792 S, Magpul, FIG. 5 right side elevation, folded; the patent office's copy, page 6, 300 dpi, harvested
Scale: the figure's own length as the stowed length (.length): 1854 px, 882.9 px/in. Read by the centre of the boss the screw ends in (four rings fitted, their centres within 3 px: column 1010 on the sheet) behind the front face (column 800.5): 209.5 px
The screw crosses the rail's channel with its lower half below the rail's top (0.12 in, a slot's depth): it is what sits in a rail's slot. The plan's reading through the screw head's middle is 0.247.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- KYGUNCO $79.99 Nov 21, 2026, in stock that day
- Dirty Bird Industries $99.70 Nov 21, 2026, in stock that day
- AR15Discounts $99.95 Nov 21, 2026, in stock that day
- Impact Guns $102.99 Nov 21, 2026, in stock that day
- GRITR Outdoors $105.20 Nov 21, 2026, in stock that day
- Midwest Gun Works $109.20 Nov 21, 2026, in stock that day
- Right To Bear $114.95 Nov 21, 2026, in stock that day
- Sportsman's Warehouse $114.99 Nov 21, 2026, in stock that day
- Primary Arms $118.70 Black Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $118.70 Nov 21, 2026, in stock that day
- Alexander's Store $118.70 Nov 18, 2026, in stock that day
- Scheels $118.99 Oct 5, 2026, in stock that day
- Magpul $124.95 Nov 21, 2026, stock not said
- Wing Tactical $109.95 Nov 21, 2026, out of stock that day
- Rifle Supply $118.49 Nov 21, 2026, out of stock that day