Backup sight
Magpul MBUS 3 Sight – Front
Magpul's MBUS 3 Sight – Front: a polymer folding backup front sight for a Picatinny rail, deployed by a spring-loaded latch, with a tool-less elevation wheel and a post that turns between a 0.06 in standard and a 0.04 in match width. Black, Flat Dark Earth, Olive Drab Green.

- Weight
- 0.88 oz Confirmedpublished: Magpul, MBUS 3 Sight – Front (MAG1166), the maker, read Oct 5, 2026
- Lowest price
- $24.99 at KYGUNCO, read Nov 21, 2026 (Black)
- Maker's number
- MAG1166
- Colours
- Black, Flat Dark Earth, Olive Drab Green
- Drawn as
- modelled
- Maker's page
- magpul.com
In “Aero 5.56 carbine, fitted out”, a build on the start page, in place of its Magpul MBUS Pro Sight – Rear.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length along the rail (folded, where it folds)2.13 in 54.1 mmCorroboratedPublished: T.REX ARMS, Magpul MBUS 3 Sight - Front, Technical Specifications (the source of its rows unstated), a seller, read Oct 5, 2026
Published “Length 2.13 inches” used
T.REX ARMS, Magpul MBUS 3 Sight - Front, Technical Specifications (the source of its rows unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Dimensions 2.13 × 0.65 × 3 in”
Dirty Bird Industries, Magpul MBUS Gen 3 Folding Front Sight - Black, Additional information, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
The same two figures as T.REX's length and total height, beside a 3 in and a 3 oz that are a parcel's: probably one origin, not a second measurement.
Photo 2.15 in ± 0.03 in
Magpul's gallery image 04.1, "Side view of stowed MBUS 3 Front Sight on railed forend", in Impact Guns' 1500 px copy; Magpul's own 1200 px file, 5cbe636d7387, reads the same, harvested
Scale: the handguard's rail teeth behind the sight in the same image (calibrate.py rail: 7 slots, residual 0.0009 in rms; 118.8 px/slot over the four nearest the sight, 301.5 px/in in the rail's mid-plane). Read by the silhouette's ends at the 50% level: the wings' tips (u 514.4) to the base's front (u 1171.7), 657.3 px = 2.180 in in the rail's mid-plane; the ends stand 0.3 to 0.6 in nearer the lens than that plane (the near wing, the near cheek) and read 0.6 to 2% long for a lens 80 to 25 in away, which isn't known: 2.15, and the ± covers that range, the pitch's ± 0.5% and the edges (the 1200 px file: 526.3 px at 95.1 px/slot, 2.180)
A published figure; the maker's own photo of the sight folded on a rail, scaled by the rail's teeth, agrees within its ±. Dirty Bird's row is the same number.
Folded, the arm lies back from its hinge along the rail (the installation sheet: "slide it onto the rail with Sight Arm to the rear"; "To stow sight, push down Sight Arm into flat position"): the base's front end to the wings' tips. Magpul states no length. This figure sets the scale of the patent's figures (the subject's header). Standing it is half as long (length_up).
Width1.38 in 35.1 mmConflictPublished: Magpul, MBUS 3 Sight – Front (MAG1166), the maker, read Oct 5, 2026
Published “It stows at just .47” tall and 1.38” wide on your M1913 picatinny rail” used
Magpul, MBUS 3 Sight – Front (MAG1166), the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Also in its feature list: "Compact (0.47ʺ tall when folded; 1.38ʺ wide)". T.REX ARMS, Wing Tactical, Dirty Bird, Midwest Gun Works, Mile High, Alexander's and AR15Discounts repeat it.
Published “Significantly reduced in size from the MBUS, it sits at just 0.44” high when folded and 1.15” at its widest point.”
Scheels, Magpul MBUS 3 Front Sight (873750-MAG1166): the maker's older copy, word for word on Right To Bear, KYGunCo, Impact Guns and GRITR Outdoors too; Primary Arms: "folds down to just .44" high and 1.15" wide so it sits on slimmer rails without overhanging", a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 1.299 in ± 0.02 in
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the boss's face (u 660.5, solid) to the screw head's (u 1854.5, in broken lines: the patent's environment): 1194 px; strokes' centres
Photo 1.255 in ± 0.03 in
Magpul's gallery image 03.1, "Underside view of MBUS 3 Front Sight in stowed position", in Impact Guns' 1500 px copy; Magpul's own 1200 px file is 2c3af1e179ed, harvested
Scale: the folded sight's own length in the same image, the wings' tips to the base's front end, 1326 px, as .length (2.13 in): 622.5 px/in. Seen from below, so the base is some 0.5 in nearer the lens than the arm's tip: sizes on the base read up to 2% large against that length. Read by the silhouette's widest rows, the boss's face to the screw head's: 781 px (Magpul's 1200 px file: 627 of 1061 px, the same 0.59 of the length). Its front view (ff4952671f93) has the same two faces 937 px apart where the cheeks are 843: 1.11 of the body, 1.27 in
The maker's own present figure for its product is kept as the published width, as the run's brief asks; it is in conflict with everything measured (the note), and the model is not built to it.
magpul and sellers differ by 0.23 in beyond what each states it is good to.
magpul and patent differ by 0.081 in beyond what each states it is good to.
magpul and photo differ by 0.125 in beyond what each states it is good to.
sellers and patent differ by 0.149 in beyond what each states it is good to.
sellers and photo differ by 0.105 in beyond what each states it is good to.
Three different sizes are in print or in the drawings, and they are kept apart. The maker's present page says 1.38 in. Its older copy, still on eight sellers' pages (Primary Arms, Scheels, Sportsman's Warehouse, Right To Bear, Rifle Supply, KYGunCo, Impact Guns, GRITR Outdoors), says 1.15 in "at its widest point": that is the body between its cheeks' outer faces (body_width, 1.143 by the patent at the length's scale). Across the round boss on its left and the screw's head on its right the patent has 1.30 (the head in broken lines) and Magpul's own photos 1.26 to 1.28. Nothing on file reproduces 1.38: at a scale that made the patent 1.38 wide it would be 2.26 in long, against T.REX's 2.13 and the rail photo's 2.15. The model is the patent's (1.27 across the boss and the head as photographed).
Height above the rail's top, folded (a fixed sight: its height)0.47 in 11.9 mmConflictPublished: Magpul, MBUS 3 Sight – Front (MAG1166), the maker, read Oct 5, 2026
Published “Height above rail, stowed ~0.47 in.” used
Magpul, MBUS 3 Sight – Front (MAG1166), the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Approximate by its own tilde. Elsewhere on the page: "0.47ʺ tall when folded", "STOWED HEIGHT OF ONLY 0.47"".
Published “Height 0.65 inches (total) 0.47 inches (above rail)”
T.REX ARMS, Magpul MBUS 3 Sight - Front, Technical Specifications (the source of its rows unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Significantly reduced in size from the MBUS, it sits at just 0.44” high when folded and 1.15” at its widest point.”
Scheels, Magpul MBUS 3 Front Sight (873750-MAG1166): the maker's older copy, word for word on Right To Bear, KYGunCo, Impact Guns and GRITR Outdoors too; Primary Arms: "folds down to just .44" high and 1.15" wide so it sits on slimmer rails without overhanging", a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 0.46 in ± 0.012 in
Magpul's gallery image 04.1, the sight folded on a railed forend, right side, in Impact Guns' 1500 px copy; Magpul's own 1200 px file is 5cbe636d7387, harvested
Scale: the handguard's rail teeth in the same image (calibrate.py rail: 7 slots, 0.0009 in rms): 301.5 px/in in the rail's mid-plane near the sight. Read by above the line through the tops of the five clear teeth behind it (266 columns, 0.9 px rms): the highest point 138.7 px (at u 627, the post's end, and 138.2 at u 870, the latch's hinge end); the arm's and the base's flat top 131 to 134 px (0.444 in). The lens stands a little above the rail (the base's top face shows), which lifts a far edge by up to 0.01 in: inside the ±
Photo 0.431 in ± 0.008 in
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the underside of the base's hinge block, which lies on the rail (row 2138.5; the rail's own top, in broken lines in FIG. 4, is row 2141.5), to the base's top edge (row 1742.5): 396 px. The arm folded reaches the same: its front face and its round end stand 193.3 px off the hinge's axis, which is 202.2 px above the rail: 395.5 px
The maker's row for exactly this dimension, approximate by its own tilde; its photo on a rail reads 0.46 to the highest point, within the two ±. The older 0.44 and the patent's 0.431 are the body's top, which is what the model draws.
magpul and sellers differ by 0.03 in beyond what each states it is good to.
magpul and patent differ by 0.039 in beyond what each states it is good to.
trex and sellers differ by 0.03 in beyond what each states it is good to.
trex and patent differ by 0.039 in beyond what each states it is good to.
sellers and photo differ by 0.02 in beyond what each states it is good to.
photo and patent differ by 0.029 in beyond what each states it is good to.
From the rail's top (Magpul's row is "Height above rail, stowed"), to its highest point. The maker's older copy says 0.44, which is the body's top: the patent's base and folded arm both top out at 0.431, and the photo's at 0.444. What stands above that in the photo, to 0.46, is a small step at the hinge end of the base's latch and the sight post's end between the wings. The clamp reaches a further 0.25 below the rail's top (clamp_below_rail; height_total).
Height above the rail's top, standing1.488 in ± 0.015 in 37.8 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi
Photo 1.488 in ± 0.015 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the underside of the base's hinge block (row 2138.5) to the wings' top (row 771.0; 771.5 in FIG. 3, 770.5 in FIG. 4 and FIG. 5): 1367.5 px; strokes' centres. The ± covers the length's last digit, the reading and a design patent's fidelity (this one's body, post and folded length sit within 1.6% of the published sizes)
To the wings' tops, the highest point: the sight post's tip is 0.1 in lower, between them. No published figure (Magpul: "Standard AR sight height when deployed").
Sight line above the rail's top (the aperture's centre, the post's tip)1.41 in 35.8 mmCorroboratedPublished: T.REX ARMS, Magpul MBUS 3 Sight - Front, Technical Specifications (the source of its rows unstated), a seller, read Oct 5, 2026
Published “Centerline Height 1.41 inches” used
T.REX ARMS, Magpul MBUS 3 Sight - Front, Technical Specifications (the source of its rows unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 1.387 in ± 0.03 in
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the underside of the base's hinge block (row 2138.5) to the post's flat top (row 863.5, the same in FIG. 5): 1275 px. The ± is the post's travel as much as the reading: a drawing shows one setting
The one published figure; the patent's post tip, drawn at one elevation setting, is within its travel of it.
The post's tip. Magpul gives no figure: "Standard AR sight height for across-the-board compatibility". T.REX's row doesn't say what its "Centerline Height" is measured to; the patent's post, at the height it is drawn (it screws up and down in its wheel), has its tip 0.023 in under it, so it is read as the sight line over the rail.
Clamp's length along the rail0.692 in ± 0.008 in 17.6 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 7 bottom view; the patent office's copy, page 9, 300 dpi
Photo 0.692 in ± 0.008 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 7 bottom view; the patent office's copy, page 9, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the base's front face (u 764.5) to the step where its jaws end and the arm's legs begin (u 1402.5): 638 px; FIG. 2's cheek ends at u 1399 at the rail's level (634.5 px); the mean, 636.3 px
The base with its two jaws, front end to rear end: the hinge block behind it lies on the rail's top and has no jaws. The part frame's origin is at its middle.
Length along the rail, standing1.072 in ± 0.01 in 27.2 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi
Photo 1.072 in ± 0.01 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the base's front (u 764.5) to the arm's flat rear face (u 1749.25): 984.75 px; FIG. 3 (u 1750.0 to 765.0) 985.0; FIG. 7 985.0
The base's front end to the arm's rear face. The arm stands at the rear of the base (the installation sheet: "slide it onto the rail with Sight Arm to the rear").
Clamp's reach below the rail's top0.248 in ± 0.006 in 6.3 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi
Photo 0.248 in ± 0.006 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the underside of the base's hinge block (row 2138.5) to the jaws' lower edge (row 2366.5, the same in FIG. 3, FIG. 4 and FIG. 5): 228 px
The jaws' lower edge. The on-rail photo (c823bae5d9f5) has the cheek's lower edge 0.24 in under the tooth tops, dark on a dark handguard (± 0.015).
Height folded, the clamp included0.679 in ± 0.012 in 17.2 mmConflictPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi
Published “Height 0.65 inches (total) 0.47 inches (above rail)”
T.REX ARMS, Magpul MBUS 3 Sight - Front, Technical Specifications (the source of its rows unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 0.679 in ± 0.012 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the jaws' lower edge (row 2366.5) to the base's top edge (row 1742.5): 624 px
Line art, whole and orthographic, which the model is built from; the on-rail photo reads 0.69 (0.444 over the tooth tops and 0.24 under them). T.REX's 0.65, which Dirty Bird's row repeats, is 0.03 under both, and what it spans isn't said.
trex and patent differ by 0.029 in beyond what each states it is good to.
The jaws' lower edge to the top. T.REX's total is 0.18 more than its height above the rail; the patent's jaws reach 0.248 under the rail's top and the photo's 0.24.
Hinge's axis behind the base's front end0.862 in ± 0.006 in 21.9 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi
Photo 0.862 in ± 0.006 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the base's front (u 764.5) to the centre of the arm's round end (u 1556.8: circles fitted to its outer arc, r 193.4 px, its face, r 161.6, and the pin in broken lines, r 67.6, concentric within 0.6 px): 792.3 px; FIG. 3, 791.8; the mean
The arm turns about it. With the hinge's height and the standing height it makes the folded length: hinge_behind_front + (height_up − hinge_y) is the length, which is how the patent's scale was set.
Hinge's axis above the rail's top0.22 in ± 0.004 in 5.6 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi
Photo 0.22 in ± 0.004 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the underside of the base's hinge block (row 2138.5) to the centre of the arm's round end (row 1936.5; 1936.2 in FIG. 3): 202.2 px
Arm's round end: its diameter (the arm's thickness at its foot)0.421 in ± 0.005 in 10.7 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi
Photo 0.421 in ± 0.005 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the circle fitted to the round end's outer arc: r 193.4 px (192.8 to 194.0 over four fits in FIG. 2 and FIG. 3); the rear face stands 192.5 px behind its centre and the lower front face 193.3 px ahead
The arm's flat rear face and the front face of its lower half are both tangent to it: folded, the arm is this thick over the hinge.
Body's width, between its cheeks' outer faces1.143 in ± 0.01 in 29 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi
Photo 1.143 in ± 0.01 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the cheeks' outer faces, u 732.5 and 1782.25: 1049.75 px; FIG. 5, 1050.0; FIG. 7, 1051.5; the mean, 1050.4 px
Without the boss and the screw's head. The sellers' older "1.15 in at its widest point" (width) is this within 0.007 in.
Cross bolt's axis ahead of the clamp's middle0.061 in ± 0.005 in 1.5 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi
Photo 0.061 in ± 0.005 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the centre of the boss's circles (u 1026.9; the screw head's in FIG. 3 mirrors it within 0.6 px) ahead of the middle of the base (u 764.5 to 1400.8: 1082.6): 55.7 px
The bolt lies in a rail slot (the installation sheet: "Remove the 10-24 Dual Drive Screw from the MBUS 3 and slide it onto the rail"), so this is where the sight sits against the slot it is in.
Cross bolt's axis below the rail's top0.007 in ± 0.003 in 0.2 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi
Photo 0.007 in ± 0.003 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the centre of the boss's circles (row 2144.8; the screw head's in FIG. 3, 2144.5) under the hinge block's underside (row 2138.5): 6.2 px
Left boss: its diameter0.425 in ± 0.006 in 10.8 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi
Photo 0.425 in ± 0.006 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 2 left elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the outermost of the boss's three circles: r 195.4 px (inner steps at r 173 and 157)
The round boss moulded on the left cheek, which the cross bolt threads into.
Left boss: how far it stands off the cheek0.078 in ± 0.004 in 2 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi
Photo 0.078 in ± 0.004 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the cheek's outer face (u 732.5) to the boss's face (u 660.5): 72 px; FIG. 7, 72 px. The underside photo (0933bc534c51) has it 50 px where the length is 1326: 0.080
Cross bolt's head: its diameter0.349 in ± 0.012 in 8.9 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 3 right elevation; the patent office's copy, page 5, 300 dpi
Photo 0.349 in ± 0.012 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 3 right elevation; the patent office's copy, page 5, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the circle in broken lines at the bolt's axis: r 160.4 px (a second at r 173, a recess round it at r 204)
In broken lines in the patent (its environment, not the claimed design).
Cross bolt's head: how far it stands off the right cheek0.053 in ± 0.01 in 1.3 mmConflictPhoto: Magpul's gallery image 03.1, "Underside view of MBUS 3 Front Sight in stowed position", in Impact Guns' 1500 px copy; Magpul's own 1200 px file is 2c3af1e179ed
Photo 0.053 in ± 0.01 in used
Magpul's gallery image 03.1, "Underside view of MBUS 3 Front Sight in stowed position", in Impact Guns' 1500 px copy; Magpul's own 1200 px file is 2c3af1e179ed, harvested
Scale: the folded sight's own length in the same image, the wings' tips to the base's front end, 1326 px, as .length (2.13 in): 622.5 px/in. Seen from below, so the base is some 0.5 in nearer the lens than the arm's tip: sizes on the base read up to 2% large against that length. Read by the right cheek's outer face (u 1143) to the head's face (u 1176): 33 px; the front view (ff4952671f93) has it 36.5 px where the cheeks are 843 px apart: 0.050
Photo 0.079 in ± 0.004 in
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by the right cheek's outer face (u 1782.25) to the head's face in broken lines (u 1854.5): 72.25 px
The screw as it is in the maker's two photographs; the patent draws it in broken lines, as its environment, and as far out as the boss.
photo and patent differ by 0.026 in beyond what each states it is good to.
Elevation wheel's diameter0.407 in ± 0.015 in 10.3 mmProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi
Photo 0.407 in ± 0.015 in used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi, harvested
Scale: the patent's own folded length as .length (2.13 in): in FIG. 2 and FIG. 3 the base's front end to the hinge's axis, 792.0 px, plus the hinge's axis to the wings' top, 1165.4 px (the arm a quarter turn back about its hinge), 1957.4 px: 919.0 px/in; FIG. 4, FIG. 5 and FIG. 7 are drawn at the same scale (their rows and lengths agree to a pixel). Read by its flutes' spacing seen face on: the middle rib (u 1222 to 1293) and the next (u 1133.5 to 1194.5) are 93.5 px apart, and in FIG. 5 the one after stands 168 px off the middle: twelve flutes at 30° on a radius of 187 px
The fluted wheel the post screws through, in its window in the arm. It is as thick as the arm less 0.014 in and shows through both faces without standing out of either (the side elevations' edges are straight there).
Elevation wheel's flutes12ProvisionalPhoto: US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi
Photo 12 count used
US D1,010,056 S (Magpul, 'Gun sight'), FIG. 4 rear elevation; the patent office's copy, page 6, 300 dpi, harvested
Scale: none needed: a ratio of two spacings in one figure. Read by the second rib's offset over the first's, 168 / 93.5 px = 1.80, is 2 cos of the angle between flutes: 26° to 30°, twelve to fourteen flutes; twelve fits the arm's thickness (wheel_d). Three ribs show in the rear window and five in the front
Sight post's width, standard0.06 in 1.5 mmConfirmedPublished: Magpul, MBUS 3 Sight – Front (MAG1166), the maker, read Oct 5, 2026
Published “Includes two adjustable sight post widths in one: a 0.06” Standard width for maximum visibility and a 0.04” Match width for increased precision” used
Magpul, MBUS 3 Sight – Front (MAG1166), the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
The post has two widths a quarter turn apart; the installation sheet: "The default position is the combat-width post."
Sight post's width, match0.04 in 1 mmConfirmedPublished: Magpul, MBUS 3 Sight – Front (MAG1166), the maker, read Oct 5, 2026
Published “Includes two adjustable sight post widths in one: a 0.06” Standard width for maximum visibility and a 0.04” Match width for increased precision” used
Magpul, MBUS 3 Sight – Front (MAG1166), the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
The patent's elevations draw the post 0.037 in wide (34 px between its edges' strokes): the match width faces the eye there.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- KYGUNCO $24.99 Black Nov 21, 2026, in stock that day
- Impact Guns $30.99 Black Nov 21, 2026, in stock that day
- GRITR Outdoors $36.95 Flat Dark Earth Nov 21, 2026, in stock that day
- T.REX ARMS $37.95 Black Nov 21, 2026, in stock that day
- T.REX ARMS $37.95 Flat Dark Earth Nov 21, 2026, in stock that day
- T.REX ARMS $37.95 Olive Drab Green Nov 21, 2026, in stock that day
- Wing Tactical $37.95 Nov 21, 2026, in stock that day
- Dirty Bird Industries $37.95 Black Nov 21, 2026, in stock that day
- Midwest Gun Works $37.95 Flat Dark Earth Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $37.95 Black Nov 21, 2026, in stock that day
- AR15Discounts $37.95 Nov 21, 2026, stock not said
- Primary Arms $37.95 Olive Drab Green Nov 21, 2026, in stock that day
- Right To Bear $37.95 Black Nov 21, 2026, in stock that day
- Alexander's Store $37.95 Black Nov 18, 2026, in stock that day
- Alexander's Store $37.95 Flat Dark Earth Nov 18, 2026, in stock that day
- Alexander's Store $37.95 Olive Drab Green Nov 18, 2026, in stock that day
- Magpul $39.95 Nov 21, 2026, stock not said
- Scheels $39.99 Oct 5, 2026, in stock that day
- Sportsman's Warehouse $37.99 Black Nov 21, 2026, out of stock that day
- Rifle Supply $43.99 Flat Dark Earth Nov 21, 2026, out of stock that day