Backup sight
Magpul MBUS Pro Sight – Front
Magpul's MBUS Pro Sight – Front (MAG275): an all-steel folding front sight for a Picatinny rail, with a post selectable between two widths and a toolless elevation knob. Black only. It folds down to the rear.

- Weight
- 1.5 oz ± 0.05 oz Confirmedpublished: Magpul, MBUS Pro Sight – Front, Model MAG275, Technical Specifications, the maker, read Oct 5, 2026
- Lowest price
- $66.99 at KYGUNCO, read Nov 21, 2026
- Maker's number
- MAG275
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- magpul.com
In “Aero 5.56 carbine, fitted out”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length along the rail (folded, where it folds)1.63 in ± 0.005 in 41.4 mmConflictPublished: Magpul, MBUS Pro Sight – Front, Model MAG275, Technical Specifications, the maker, read Oct 5, 2026
Published “Length, stowed 1.63 in.” used
Magpul, MBUS Pro Sight – Front, Model MAG275, Technical Specifications, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
And among its features: "Stowed footprint covers 1.63” of rail".
Published “Length, stowed: 1.6"”
Wing Tactical, Magpul MBUS Pro Front Sight (MPN MAG275), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Magpul's earlier wording, which Primary Arms, Midwest Gun Works, Scheels, Mile High, KYGUNCO, Dirty Bird and AR15Discounts carry too: a figure to one decimal, which both 1.57 and 1.63 round to.
Published “Front Length: 1.57 in / 40 mm (stowed)”
Recoil, Back-up Iron Sights Buyer's Guide (2015-12-28), the MBUS Pro's table (who measured, and how, unstated), a review, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 1.564 in ± 0.012 in
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the clamp in the rear elevation (FIG. 4, 5412c5a0484c, drawn at the side elevations' scale): the fixed jaw's vee (u 1702) to the clamp bar's wall (u 877), 825 px, as a rail of std.picatinny.top_width (.835 in): 988 px/in. Read by the side elevation's length, 1545 px between its strokes' centres (u 488 to 2033); ± 4 px on the jaws and the standard's -.005
Holds only if the patent draws the clamp closed on a rail. Its cross bolt, 190 px across in the same figure, says the same of a No. 10 screw (0.190 in: 1000 px/in).
The maker's own current figure, stated twice, and the one its two heights go with: 1.56 deployed less ~0.43 stowed is 1.13 in, and the patent's figures at this length's scale give 1.123. Recoil's 1.57 and a rail in the patent's clamp both say 4% less; nothing on file shows the sight beside a scale to settle it.
magpul and recoil differ by 0.06 in beyond what each states it is good to.
magpul and rail differ by 0.066 in beyond what each states it is good to.
The base's front end to the wings' tips, the arm folded to the rear. The patent's figures are the model's shape and this figure their scale (the subject's header has what was tried against it).
Width1.248 in ± 0.01 in 31.7 mmProvisionalPhoto: US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 3 front elevation; the patent office's copy, page 3, 300 dpi
Photo 1.248 in ± 0.01 in used
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 3 front elevation; the patent office's copy, page 3, 300 dpi, harvested
Scale: the figure's overall height, 632 px, is the side elevation's (631 px, FIG. 6): one scale, the side elevation's length as .length (1545 px = 1.63 in, 947.9 px/in). Read by the nut's outer face (u 673) to the cross bolt's head (u 1856): 1183 px; FIG. 4 reads 1184. ± covers the length's ±, the reading and a design patent's fidelity
No page states it. Across the cross bolt, its head on the rifle's left and its nut on the right; the body alone (the base's two legs) is 1019 px, 1.075 in. Dirty Bird's and AR15Discounts' shop fields print "1.63 × 0.43 × 1.44 in" unlabelled (their markup calls 1.44 the height and 0.43 the width): 1.44 is no size of this sight the figures give.
Height above the rail's top, folded (a fixed sight: its height)0.43 in 10.9 mmConflictPublished: Magpul, MBUS Pro Sight – Front, Model MAG275, Technical Specifications, the maker, read Oct 5, 2026
Published “Height above rail, stowed ~0.43 in. max” used
Magpul, MBUS Pro Sight – Front, Model MAG275, Technical Specifications, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Front Height: 0.43 in / 11 mm (stowed)”
Recoil, Back-up Iron Sights Buyer's Guide (2015-12-28), the MBUS Pro's table (who measured, and how, unstated), a review, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 0.455 in ± 0.008 in
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 3 front elevation; the patent office's copy, page 3, 300 dpi, harvested
Scale: the figure's overall height, 632 px, is the side elevation's (631 px, FIG. 6): one scale, the side elevation's length as .length (1545 px = 1.63 in, 947.9 px/in). Read by the roof of the clamp's channel (the heavy line at row 1218) to the top of the elevation knob and the ridges beside it (row 787): 431 px
From the channel's roof, taken as the rail's top (the base resting on the rail). At 988 px/in, the scale a rail in the clamp sets, it is 0.436.
The maker's figure, which it marks approximate ("~", "max"). The patent's figures at the length's scale stand 0.025 in more above the channel's roof: the model is that much taller folded than this figure.
magpul and patent differ by 0.025 in beyond what each states it is good to.
recoil and patent differ by 0.025 in beyond what each states it is good to.
Above the rail's top, as Magpul words it: the clamp reaches .clamp_depth below it.
Height above the rail's top, standing1.56 in ± 0.005 in 39.6 mmConfirmedPublished: Magpul, MBUS Pro Sight – Front, Model MAG275, a feature heading, the maker, read Oct 5, 2026
Published “STOWED HEIGHT OF ONLY 0.43" KEEPS YOUR BACKUP OUT OF SIGHT; STANDARD AR SIGHT HEIGHT (1.56” ABOVE RAIL) WHEN DEPLOYED” used
Magpul, MBUS Pro Sight – Front, Model MAG275, a feature heading, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Read as the top of the two wings, not the post's tip (.sight_line_above_rail has why).
Photo 1.578 in ± 0.015 in
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figure's own length, 1545 px, as .length (1.63 in): 947.9 px/in. Read by the hinge pin's centre above the channel's roof (.pivot_y, 243 px) plus the arm's reach from it to the wings' tips (.arm_reach, 1253 px): the arm turned a quarter turn about the pin. ± covers the length's ±, the readings and a design patent's fidelity
The maker's figure; the patent's arm, stood up about its hinge at the length's scale, reaches 0.018 in more.
To the wings' tips, the highest of it standing. The post's tip is lower (.sight_line_above_rail).
Sight line above the rail's top (the aperture's centre, the post's tip)1.41 in ± 0.005 in 35.8 mmConflictPublished: Magpul, MBUS Pro Sight – Rear, Model MAG276 (the rear sight of the pair), a feature heading; its table: "Aperture height over rail: 1.42 in.", the maker, read Oct 5, 2026
Published “STOWED HEIGHT OF ONLY 0.43" KEEPS YOUR BACKUP OUT OF SIGHT; STANDARD AR SIGHT HEIGHT (1.56” ABOVE RAIL) WHEN DEPLOYED”
Magpul, MBUS Pro Sight – Front, Model MAG275, a feature heading, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
The page ties this figure to the sight height. It lands on the wings' tips (.height_up), 0.15 in above the post's.
Published “STOWED HEIGHT OF ONLY 0.38" KEEPS YOUR BACKUP OUT OF SIGHT; STANDARD AR SIGHT HEIGHT (1.41” ABOVE RAIL) WHEN DEPLOYED” used
Magpul, MBUS Pro Sight – Rear, Model MAG276 (the rear sight of the pair), a feature heading; its table: "Aperture height over rail: 1.42 in.", the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
The same sentence on the rear sight's page, where the figure is its aperture's. The front's sheet (072-0074-A) puts the two on one plane, so a line of sight level with the rail has the post's tip at the aperture's height.
Photo 1.414 in ± 0.02 in
Magpul's gallery, mag275-blk_mbus_pro_sight_front_02_1.jpg: the sight standing, straight from the shooter's end, 1200 x 1200, harvested
Scale: the arm's reach in the gallery's side view at the same magnification (02c61aa64f62: the hinge pin's centre, row 782, to the wings' tips, row 228: 554 px) as .arm_reach: 419 px/in. Read by the post's tip (row 270) 61 px below the wings' tips (rows 208 to 210): 0.146 in, taken off Magpul's 1.56 for the wings' tips (.height_up). ± 4 px on the two photos' scale and the tips
The post screws up and down (about 0.004 in a click by Magpul's click value): this is where Magpul's own photo has it.
Photo 1.459 in ± 0.02 in
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 7 top plan; the patent office's copy, page 5, 300 dpi, harvested
Scale: the plan's own length, 1465 px, as .length (1.63 in): 898.6 px/in along the sight. Read by the post's tip (u 578) 91 px short of the wings' tips (u 487): 0.101 in, taken off Magpul's 1.56 for the wings' tips (.height_up)
Where the patent draws an adjustable post: 0.045 in higher than Magpul's photo has it.
Magpul's 1.56 is the sight's top: the patent's wings stand 1.58 at the length's scale, and in Magpul's own photo the post's tip is 0.146 in below them, which is 1.56 less the 1.41 to 1.42 its rear sight's page gives the same sentence and its aperture. The post's tip, at the height the pair is made to share.
magpul and rear differ by 0.15 in beyond what each states it is good to.
magpul and photo differ by 0.146 in beyond what each states it is good to.
magpul and patent differ by 0.101 in beyond what each states it is good to.
rear and patent differ by 0.049 in beyond what each states it is good to.
photo and patent differ by 0.045 in beyond what each states it is good to.
The post's tip, standing, at the setting that puts it level with the rear sight's aperture on one rail: it is adjustable for elevation.
Clamp's length along the rail1.035 in ± 0.008 in 26.3 mmProvisionalPhoto: US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi
Photo 1.035 in ± 0.008 in used
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figure's own length, 1545 px, as .length (1.63 in): 947.9 px/in. Read by the base's two ends on its bottom line (u 1052 and 2033): 981 px; FIG. 5 reads the same (u 489 to 1470)
The whole base: the saddle under the hinge and the clamp behind it. The cross bolt, which is its recoil lug, is 0.20 in behind the middle (.screw_behind_front); the arm, folded, reaches 0.60 in behind the base.
Cross bolt's axis behind the base's front end0.717 in ± 0.006 in 18.2 mmCorroboratedPhoto: US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi
Photo 0.717 in ± 0.006 in used
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figure's own length, 1545 px, as .length (1.63 in): 947.9 px/in. Read by the nut's rings, concentric about (1353, 2378) (the outer one 143 px in radius), behind the base's front end (u 2033): 680 px of the base's 981. ± covers the length's ±, 3 px on the rings' centre and a design patent's fidelity
Photo 0.712 in ± 0.012 in
Magpul's gallery, the sight standing, straight from the rifle's left: the cross bolt's head toward the camera, 1200 x 1200, harvested
Scale: the base's own length in the photo, 442 px (its silhouette's two ends, columns 390 and 832), as .clamp_length (1.035 in): 427 px/in. Read by the head's centre (column 694: the middle of the arc its rim makes below the clamp's bottom edge, the same at three heights) behind the base's front end (column 390): 304 px of 442. ± 3 px on the centre and on each end, and the head standing 0.1 in nearer the lens than the wall
A fraction of the base's length (0.688; the patent's is 0.693): the scale is the patent's, the place is the photo's own. The part's notes had the photo's head "about 0.07 in further back" than the patent's until 2026-10-05: measured, it is 0.005 in further forward.
The figure the model is built from, so the bolt drawn is the bolt the slot holds; Magpul's photo of the sight as sold agrees within its own reading.
The cross bolt is the sight's recoil lug (Magpul's sheet: "Push Sight forward in recess until recoil lug is engaged"): it crosses the clamp's channel with its lower part below the rail's top (.clamp_depth has the channel; the front elevation draws the bolt's underside 0.114 in below the roof), so it is what a rail's slot holds, and the sight is placed on a rail by it. The base reaches this far ahead of the slot's centre and .clamp_length less this (0.32 in) behind it. Until 2026-10-05 the sight was placed by the middle of its base, which put the bolt over a tooth, half a pitch from any slot.
Clamp's reach below the rail's top0.212 in ± 0.005 in 5.4 mmProvisionalPhoto: US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 3 front elevation; the patent office's copy, page 3, 300 dpi
Photo 0.212 in ± 0.005 in used
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 3 front elevation; the patent office's copy, page 3, 300 dpi, harvested
Scale: the figure's overall height, 632 px, is the side elevation's (631 px, FIG. 6): one scale, the side elevation's length as .length (1545 px = 1.63 in, 947.9 px/in). Read by the roof of the clamp's channel (the heavy line at row 1218) to the jaws' lowest point (row 1419): 201 px; FIG. 4 reads the same (rows 2320 and 2521)
The channel's roof is taken as the rail's top: the frame's origin. Not a figure Magpul gives.
Overall height folded (the jaws' bottom to the knob's top)0.666 in ± 0.005 in 16.9 mmProvisionalPhoto: US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi
Photo 0.666 in ± 0.005 in used
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figure's own length, 1545 px, as .length (1.63 in): 947.9 px/in. Read by the base's bottom line (row 2566) to the top of the elevation knob and the ridges beside it (row 1935): 631 px; FIG. 5 reads 631 (rows 1493 and 862)
What the front elevation is scaled by: it shows the same height (632 px).
Hinge pin's axis ahead of the clamp's middle0.209 in ± 0.005 in 5.3 mmProvisionalPhoto: US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi
Photo 0.209 in ± 0.005 in used
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figure's own length, 1545 px, as .length (1.63 in): 947.9 px/in. Read by the pin's pocket, a circle of 79.5 px about (1741, 2122) (the fraction of each candidate circle lying on the drawing's strokes, searched over centre and radius): 292 px behind the base's front end (u 2033), which is half of .clamp_length ahead of the middle. FIG. 5's pin is 291 px behind its front end
Hinge pin's axis above the rail's top0.256 in ± 0.005 in 6.5 mmProvisionalPhoto: US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi
Photo 0.256 in ± 0.005 in used
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figure's own length, 1545 px, as .length (1.63 in): 947.9 px/in. Read by the pin's pocket, a circle about (1741, 2122): 444 px above the base's bottom line (row 2566), less the 201 px of .clamp_depth: 243 px. FIG. 5's pin is 444 px above its bottom line too
Arm's reach from the hinge pin's axis to the wings' tips1.322 in ± 0.008 in 33.6 mmProvisionalPhoto: US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi
Photo 1.322 in ± 0.008 in used
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figure's own length, 1545 px, as .length (1.63 in): 947.9 px/in. Read by the pin's centre (u 1741) to the wings' tips (u 488), along the folded arm: 1253 px. FIG. 5 reads 1253 (u 780 to 2033)
Folded, it lies along the rail; standing, it is the height of the wings' tips above the pin. Magpul's gallery side view of it standing (02c61aa64f62) has the arm's reach 1.253 of the base's length; the patent, 1.277.
Elevation knob's diameter0.388 in ± 0.01 in 9.9 mmProvisionalPhoto: US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi
Photo 0.388 in ± 0.01 in used
US D705,890 S (Magpul, 'Folding front sight for a firearm'), FIG. 6 right side elevation; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figure's own length, 1545 px, as .length (1.63 in): 947.9 px/in. Read by twice the knob's top (row 1938) above the hinge pin's axis (row 2122), on which the post's axis and so the knob's lies: 2 x 184 px. The top plan (FIG. 7) draws the knob 358 px across at its own scale across the sight (0.970 of this one): 369 px here
A fluted drum on the post's axis, in a window through the arm; it stands 0.07 in out of the arm's face.
Post's width, its Standard face0.06 in ± 0.005 in 1.5 mmConfirmedPublished: Magpul, MBUS Pro Sight – Front, Model MAG275, Features, the maker, read Oct 5, 2026
Published “Includes two adjustable sight post widths in one: a 0.06” Standard width for maximum visibility and a 0.04” Match width for increased precision” used
Magpul, MBUS Pro Sight – Front, Model MAG275, Features, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Post's width, its Match face0.04 in ± 0.005 in 1 mmConfirmedPublished: Magpul, MBUS Pro Sight – Front, Model MAG275, Features, the maker, read Oct 5, 2026
Published “Includes two adjustable sight post widths in one: a 0.06” Standard width for maximum visibility and a 0.04” Match width for increased precision” used
Magpul, MBUS Pro Sight – Front, Model MAG275, Features, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
The face it is assembled with toward the shooter: "The sight is assembled with the thinner .040” Match side showing but .060” Standard width may be selected for greater visibility" (Magpul's sheet 072-0074-A).
Cross bolt's hex socket (across its flats)0.125 in ± 0.001 in 3.2 mmConfirmedPublished: Magpul, MAG275 MBUS Pro Sight – Front installation instructions (072-0074-A), POSITION SIGHT ON RAIL, the maker, read Oct 5, 2026
Published “Using a 1/8” hex key or flat-head screwdriver, loosen the 10-24 dual-drive screw enough to mount sight onto the rail.” used
Magpul, MAG275 MBUS Pro Sight – Front installation instructions (072-0074-A), POSITION SIGHT ON RAIL, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
The key's size, taken as the socket's. The bolt's thread is 10-24 by the same sentence; the patent draws it 0.20 in across at the length's scale (a No. 10 thread is 0.190).
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- KYGUNCO $66.99 Nov 21, 2026, in stock that day
- Impact Guns $81.99 Nov 21, 2026, in stock that day
- AR15Discounts $84.95 Nov 21, 2026, in stock that day
- GRITR Outdoors $85.08 Nov 21, 2026, in stock that day
- Midwest Gun Works $90.20 Nov 21, 2026, in stock that day
- Wing Tactical $94.95 Nov 21, 2026, in stock that day
- Right To Bear $94.95 Nov 21, 2026, in stock that day
- Sportsman's Warehouse $94.99 Nov 21, 2026, in stock that day
- Rifle Supply $96.49 Nov 21, 2026, in stock that day
- Primary Arms $99.70 Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $99.70 Nov 21, 2026, in stock that day
- Dirty Bird Industries $99.70 Nov 21, 2026, in stock that day
- Alexander's Store $99.70 Nov 18, 2026, in stock that day
- Scheels $99.99 Oct 5, 2026, in stock that day
- Magpul $104.95 Nov 21, 2026, stock not said