Handguard
Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
Midwest Industries' 15 in free-float M-LOK handguard, with the barrel nut, torque plate and two clamp screws it mounts by. The maker's page (one page for thirteen lengths; this one is MI-CRM15): "4140 Heat Treated Barrel Nut", "Barrel Nut and Wrench Included", "Features Patented 4140 Heat Treated Torque Plate", "6061 Aluminum Type 3 Hard Coat Anodized", "Continuous MIL-STD 1913 Picatinny Top rail", "Two Integral Anti-Rotation QD Sling Sockets", "Super Slim 1.5” Outside and 1.3” Inside Diameter", "Seven Sides of M-Lok", "5-Slot Polymer M-Lok rail included"; and "This handguard is compatible with standard forged upper receivers.", "NOT FOR USE ON GAS PISTON AR’s!". Magpul® and M-LOK™ are trademarks of Magpul Industries Corp.

- Weight
- 11.4 oz ± 0.05 oz Confirmedpublished: Midwest Industries, Combat Rail One Piece Free Float Handguard, M-LOK™ (15 in: MI-CRM15), Product Details, the maker, read Oct 12, 2026
- Lowest price
- $209.95 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- MI-CRM15
- Colours
- Black, Magpul FDE
- Drawn as
- modelled
- Maker's page
- midwestindustriesinc.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision AR15 15" R-ONE M-LOK handguard.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Weight, its barrel nut (worked out from its steel)1.05 oz ± 0.4 ozProvisionalWorked out: 0.785398163 * ({.nut_od} * {.nut_od} - {.nut_bore} * {.nut_bore}) * {.nut_length} * {std.density.steel}
Worked out 1.05 oz ± 0.4 oz used
0.785398163 * ({.nut_od} * {.nut_od} - {.nut_bore} * {.nut_bore}) * {.nut_length} * {std.density.steel}, harvested
WORKED OUT, not published: no page weighs the nut. A plain ring of its outside diameter, its threaded bore and its length, each read off a photo, times std.density.steel (the maker: "4140 Heat Treated Barrel Nut"). Its inner lip at the muzzle end adds a little and its groove, its notches and its knurl take a little off: neither is counted. The ± is what the three readings leave.
Weight, its two clamp screws (worked out from their steel)0.25 oz ± 0.07 ozProvisionalWorked out: 2 * 0.785398163 * ({.screw_d} * {.screw_d} * {.screw_length} + {.screw_head_d} * {.screw_head_d} * {.screw_head_height}) * {std.density.steel}
Worked out 0.247 oz ± 0.07 oz used
2 * 0.785398163 * ({.screw_d} * {.screw_d} * {.screw_length} + {.screw_head_d} * {.screw_head_d} * {.screw_head_height}) * {std.density.steel}, harvested
WORKED OUT, not published. Two socket head cap screws, each a shank of the stated length and a head, as plain rounds (the sockets aren't taken off), times std.density.steel.
Weight, its torque plate (worked out from its steel)0.1 oz ± 0.04 ozProvisionalWorked out: {.plate_length} * {.plate_height} * {.plate_thickness} * {std.density.steel}
Worked out 0.099 oz ± 0.04 oz used
{.plate_length} * {.plate_height} * {.plate_thickness} * {std.density.steel}, harvested
WORKED OUT, not published. A flat plate of its length, height and thickness as read, times std.density.steel (the maker: "Patented 4140 Heat Treated Torque Plate"); its two holes and its post aren't counted, which about cancel.
Weight, the handguard's aluminium alone (worked out)10.01 oz ± 0.45 ozProvisionalWorked out: {.weight} - {.weight_nut} - {.weight_screws} - {.weight_plate}
Worked out 10.005 oz ± 0.45 oz used
{.weight} - {.weight_nut} - {.weight_screws} - {.weight_plate}, harvested
WORKED OUT, not published: the installed weight less the steel that is weighed with it (the nut, the two screws, the plate), each of which is itself worked out from sizes read off photos. What the model's aluminium is held to.
Length, end to end (its rear face to the tips of its muzzle end, the tabs behind the rear face left out)15 in ± 0.05 in 381 mmConfirmedPublished: Midwest Industries, Combat Rail One Piece Free Float Handguard, M-LOK™ (15 in: MI-CRM15), Product Details, the maker, read Oct 12, 2026
Published “15.0" - 11.4oz” used
Midwest Industries, Combat Rail One Piece Free Float Handguard, M-LOK™ (15 in: MI-CRM15), Product Details, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “15.0" overall length”
Midwest Gun Works, Midwest Industries AR-15 Combat Rail M-Lok Handguard, 15" Black (Code: MI-CRM15), a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “15" overall length”
Right to Bear, Midwest Industries Combat Rail One Piece Free Float Handguard 15" - M-LOK (SKU: MI-CRM15), a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
Photo 14.95 in ± 0.04 in
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the rail's rear end (its near corner at px 142, 13 px nearer the lens's column in the mid-plane: half what the notches have narrowed by there) 1.575 pitches behind the rearmost slot's centre (px 232.5), its front end (px 2066, 10 px likewise) 1.243 ahead of the foremost (px 1993.5): 37.82 pitches, 14.89 in; the side face's tip (px 2080, at k 1.021) 0.143 pitch further: 14.945. The left photo e1fb6c9b2da4 reads the rail 14.91 and the tips 0.045 further (m2.py, m4.py)
The maker's figure to its one decimal; two photos read 14.95, inside both ±.
The maker names the size 15.0" in its table of weights and 15" in its list of lengths; sellers write it as the overall length. By its own rail it reads 14.95: the rail 14.90 from end to end (36 slots and two lands) and the side faces' tips 0.05 further.
Width across the side faces (3 to 9 o'clock)1.5 in ± 0.05 in 38.1 mmConfirmedPublished: Midwest Industries, Combat Rail One Piece Free Float Handguard, M-LOK™ (15 in: MI-CRM15), Product Details, the maker, read Oct 12, 2026
Published “Super Slim 1.5” Outside and 1.3” Inside Diameter” used
Midwest Industries, Combat Rail One Piece Free Float Handguard, M-LOK™ (15 in: MI-CRM15), Product Details, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Width: 1.5"”
Wing Tactical, Midwest Industries M-LOK Combat Rail (MPN: MI-CRM10.5 / MI-CRM12.625 / MI-CRM14 / MI-CRM15), Specifications, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's; a seller states the same figure as a width.
The maker's "1.5” Outside ... Diameter" is a size, not a shape: the section has flat faces. Wing Tactical gives it as a width beside a height. The bottom flat stands the same 0.75 in from the bore (body_bottom_below_bore), and the faces between are taken to (diag_face_distance).
Height (the rail's top to the bottom flat; the clamp lug under the rear end left out)1.97 in ± 0.005 in 50 mmCorroboratedPublished: Wing Tactical, Midwest Industries M-LOK Combat Rail (MPN: MI-CRM10.5 / MI-CRM12.625 / MI-CRM14 / MI-CRM15), Specifications, a seller, read Oct 12, 2026
Published “Height: 1.97"” used
Wing Tactical, Midwest Industries M-LOK Combat Rail (MPN: MI-CRM10.5 / MI-CRM12.625 / MI-CRM14 / MI-CRM15), Specifications, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
Photo 1.95 in ± 0.02 in
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots beside the lens's column: 50.8 px a pitch, 129.0 px/in in the mid-plane, each edge at its own depth from a lens 35 in away. Read by at the lens's column: the rail's top (row 607, its near edge 0.37 in nearer the lens) to the bottom flat's near edge (row 861, 0.25 nearer), about a principal row taken at the image's middle (733): 0.9665 above it and 0.985 below (m2.py)
The one published figure, from a seller's own table; the level photo reads 0.02 less, inside its ±.
What Wing Tactical's 1.97 in spans is read on the level photo: the rail's top to the bottom flat is 1.95 there; to the bottom of the clamp lug under the rear end it would be 2.34. Half the width below the bore and a mil-spec receiver's rail above it (1.2125, bcm-m4-upper) come to 1.9625.
Inside diameter (across the inner flats)1.3 in ± 0.05 in 33 mmConfirmedPublished: Midwest Industries, Combat Rail One Piece Free Float Handguard, M-LOK™ (15 in: MI-CRM15), Product Details, the maker, read Oct 12, 2026
Published “Super Slim 1.5” Outside and 1.3” Inside Diameter” used
Midwest Industries, Combat Rail One Piece Free Float Handguard, M-LOK™ (15 in: MI-CRM15), Product Details, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Inner Diameter: 1.3"”
Wing Tactical, Midwest Industries M-LOK Combat Rail (MPN: MI-CRM10.5 / MI-CRM12.625 / MI-CRM14 / MI-CRM15), Specifications, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Inner Diameter 1.3”
Primary Arms, Midwest Industries Combat Rail Free Float AR-15 Handguard - M-LOK - 15" (SKU and MPN MI-CRM-15.0), a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's; two sellers repeat it.
The maker's "1.3” Inside Diameter": ahead of the barrel nut the inside has flat walls that follow the outside (Primary Arms' view of the muzzle end, fac9b67f0d22), and the model takes this figure across the inner side flats, which leaves a wall of 0.1 in. The light through the slots of the faces at 45 degrees is 17 px tall on the level photo where a wall of no thickness would show 25: a wall of 0.09 in. Over the barrel nut the bore is round and larger (nut_od).
Its rear face against the receiver's front face (negative: behind it)-0.445 in ± 0.04 in -11.3 mmConfirmedWorked out: 0in - {std.ar15.upper_barrel_thread_length}
Worked out -0.445 in ± 0.04 in used
0in - {std.ar15.upper_barrel_thread_length}, harvested
No page says where it stops and no photo of this handguard mounted is on file (Wing Tactical's pictures of a complete upper are of the Lightweight Combat Rail, another product). It slides back over its barrel nut until its two tabs lie along the receiver's sides (Primary Arms: "Indexing tabs key the handguard against the receiver to keep it from rotating under recoil"): its rear face is taken to meet the receiver's front shoulder, where the barrel-nut thread begins (std.ar15.upper_barrel_thread_length behind the front face), with no gap. A check that isn't a photo: its rail's first slot then stands 0.01 in from where the receiver's own row of slots would continue at the standard's pitch (bcm-m4-upper), and the maker calls the rail "Continuous MIL-STD 1913 Picatinny Top rail".
Its two tabs' reach behind its rear face0.165 in ± 0.02 in 4.2 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.165 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the tab's rear end (px 118, rows 690 to 703) behind the side face's rear edge (px 138): 20 px at 126.8 px/in (49.1 px a pitch at the rear end, 1.7% more at the tab's depth): 0.158; the left photo reads 22 px, 0.173 (m4.py)
Wing Tactical: "Two integral anti-rotation tabs". Each is the wall of an upper face (between a side face and the neck under the rail) carried on behind the rear face, its end cut to a blunt point: one each side, seen on both level photos and, from behind, on Wing Tactical's and the maker's pictures of the rear end.
The opening between its two tabs' inner faces0.638 in ± 0.03 in 16.2 mmCorroboratedWorked out: 2 * {bcm-m4-upper.side_half_width}
Worked out 0.638 in ± 0.03 in used
2 * {bcm-m4-upper.side_half_width}, harvested
Not measured: no view shows it square on. The tabs stand beside a mil-spec receiver's flat sides under its rail (0.56 to 0.82 in above the bore on the catalog's receivers), which is what keeps the handguard from turning, and their inner faces are drawn against those flats with no clearance.
The outline's rear end (its tabs' ends) against the receiver's front face (negative: behind it)-0.61 in ± 0.045 in -15.5 mmProvisionalWorked out: {.rear_face_x} - {.tab_length}
Worked out -0.61 in ± 0.045 in used
{.rear_face_x} - {.tab_length}, harvested
Length over all, its tabs' ends to its muzzle end15.165 in ± 0.055 in 385.2 mmProvisionalWorked out: {.length} + {.tab_length}
Worked out 15.165 in ± 0.055 in used
{.length} + {.tab_length}, harvested
The bottom flat below the bore axis0.75 in ± 0.015 in 19 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.75 in ± 0.015 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots beside the lens's column: 129.0 px/in in the mid-plane, each edge at its own depth from a lens 35 in away. Read by the bottom flat's near edge (row 861) below the middle of the light through the side rows' slots (row 764, on the near face): 0.985 and 0.235 below the principal row: 0.750. The left photo: 97.5 px between the same two, the right one 97 (m2.py)
The bore's axis is taken on the side faces' rows of M-LOK slots (the light through them, both walls: rows 746 to 782 at the lens's column), which is where the sling sockets also stand. The bottom flat is then half the published width below it: the tube is as deep below the bore as it is wide either side.
Its rail's top above the bore axis1.22 in ± 0.02 in 31 mmProvisionalWorked out: {.height} - {.body_bottom_below_bore}
Worked out 1.22 in ± 0.02 in used
{.height} - {.body_bottom_below_bore}, harvested
Photo 1.2 in ± 0.02 in
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots beside the lens's column: 129.0 px/in in the mid-plane, each edge at its own depth from a lens 35 in away. Read by the rail's top (row 607) above the middle of the light through the side rows' slots (row 764): 0.9665 above the principal row and 0.235 below it (m2.py)
The published height over the bottom's depth; the photo's own reading of the rail's top is 0.02 less, inside its ±, and a mil-spec receiver's rail is between the two.
Not published as such: the published height less the bottom flat's depth below the bore. The catalog's mil-spec receivers have their rail 1.2125 and 1.2145 in above the bore (bcm-m4-upper, expo-arms-stripped-upper), which this is within a hundredth of: the maker's "Continuous" rail.
The side faces' flat height (between the two narrow faces that break its corners)0.478 in ± 0.015 in 12.1 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.478 in ± 0.015 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots beside the lens's column, 2.1% more on the near side face: 131.8 px/in. Read by a column through the bar between two slots beside the lens's column (px 1192): the side face in shadow from row 732 to row 795, between two lighter bands: 63 px (m2.py; the left photo, px 1000: rows 708 to 770, 62 px)
Centred on the bore: the middle of the flat is the middle of the light through the side rows' slots within a pixel. A regular octagon 1.5 in across would have 0.621 here; the corners between each side face and the faces at 45 degrees are broken by a narrow face (corner_chamfer_height), which is where the small scallops are cut.
The narrow face between each side face and the face at 45 degrees beside it, its height as seen from the side0.106 in ± 0.015 in 2.7 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.106 in ± 0.015 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots beside the lens's column, 2.1% more on the near side face: 131.8 px/in. Read by the same column: the lighter band above the side face, rows 718 to 731, and the one below it, rows 796 to 809: 14 px each (m2.py; the left photo: rows 694 to 706 and 770 to 784)
A corner broken evenly on a regular octagon 1.5 in across, from where the side face's flat ends (0.239 from the bore's height), would end 0.361 from it on the face at 45 degrees: the band reads to 0.345. The corners between the lower faces and the bottom flat show the same narrow face, 5 px tall at the foot of the level photo.
The faces at 45 degrees (between the sides and the rail, and between the sides and the bottom): their distance from the bore axis0.75 in ± 0.02 in 19 mmConfirmedWorked out: {.width} / 2
Worked out 0.75 in ± 0.02 in used
{.width} / 2, harvested
Taken as the side faces' and the bottom's: a regular octagon about the bore, which is what the maker's one "1.5” Outside ... Diameter" for a section with flat faces says, with the faces at 45 degrees (Wing Tactical: "allow user to mount accessories at 45-degree"). Three checks on the level photo: the bottom flat reads 0.75 below the bore (body_bottom_below_bore); the narrow faces at the side faces' corners straddle where a regular octagon's corners are (0.311 from the bore's height: corner_chamfer_height); and the upper faces end 0.664 above the bore, 0.397 from the middle at this distance, just outside a neck of 0.345 (the narrow shelf the views from behind show under the neck).
Where the upper faces end and the shelf under the neck begins, above the bore0.664 in ± 0.02 in 16.9 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.664 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots beside the lens's column, 1.2% more at this edge's depth: 130.5 px/in. Read by the line under the row of round holes (row 677 on a 3x crop of the muzzle end), 0.429 above the principal row, the bore 0.235 below it (m2.py)
The neck's width under the rail (across its two walls)0.69 in ± 0.03 in 17.5 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.69 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: the rail's own notches on the same photo: they lose 0.0239 of their distance from the lens's column, for a rail 0.835 in wide. Read by the light through each round hole is 0.61 pitch long at the lens's column and 0.302 sixteen pitches from it: 0.0193 a pitch, 0.672 in across the neck; the left photo reads 0.0169 against its notches' 0.0199: 0.710 (m2.py)
Narrower than the rail's 0.835: the rail's lower faces come in to it. Read from how the light through the neck's round holes narrows away from the lens's column, against how the rail's notches do (the rail is 0.835 wide: std.picatinny.top_width).
The neck's walls, their thickness0.06 in ± 0.02 in 1.5 mmProvisionalPhoto: Wing Tactical's gallery for the M-LOK Combat Rail, 58126: a Combat Rail seen from behind and its right, the rear end near, 1280 x 1280; which of its four lengths isn't stated
Photo 0.06 in ± 0.02 in used
Wing Tactical's gallery for the M-LOK Combat Rail, 58126: a Combat Rail seen from behind and its right, the rear end near, 1280 x 1280; which of its four lengths isn't stated, harvested
Scale: the neck's own width on its rear face (this ledger's neck_width over 575 px on an 8x crop). Read by each wall of the opening under the rail, about 50 px of the 575 between the neck's outer faces (the opening itself 470)
The rear end is the same on every length of this handguard (the maker's pictures of thirteen).
The channel under the rail (the gas tube's), its roof below the rail's top0.15 in ± 0.03 in 3.8 mmProvisionalPhoto: Wing Tactical's gallery for the M-LOK Combat Rail, 58126: a Combat Rail seen from behind and its right, the rear end near, 1280 x 1280; which of its four lengths isn't stated
Photo 0.15 in ± 0.03 in used
Wing Tactical's gallery for the M-LOK Combat Rail, 58126: a Combat Rail seen from behind and its right, the rear end near, 1280 x 1280; which of its four lengths isn't stated, harvested
Scale: the neck's own height on its rear face (the rail's top to the shelf, 0.556 in by this ledger, over 527 px on an 8x crop). Read by the opening's top edge 126 to 150 px below the rear face's top edge beside it: 0.13 to 0.16
Weakly read: an oblique view, and the rear face's top edge is broken. Deeper than the rail's slots (std.picatinny.slot_depth), as it has to be.
Slots in its top rail36ProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 36 count used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: none: a count. Read by the notches of the silhouette's top edge (luminance under 235): 36, centres from px 232.5 to px 1993.5, each 49 to 52 px from the next with none missing, a longer land at each end; 36 again on the left photo e1fb6c9b2da4 (px 206 to 1965.5) (m2.py)
Its rail's rearmost slot (its centre) ahead of its rear face0.62 in ± 0.02 in 15.7 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.62 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the rail's rear end (its near corner at px 142, 13 px nearer the lens's column in the mid-plane) behind the rearmost slot's centre (px 232.5): 77.5 px at 49.2 px a pitch, 1.575 pitches; the left photo reads 1.584 (m2.py, m4.py)
The rail's rear end is the body's rear face (the views from behind show one plane; the level photos read the side faces' rear edge within 0.04 in of it either way).
Its rail's rearmost slot (its centre) ahead of the receiver's front face0.175 in ± 0.045 in 4.4 mmProvisionalWorked out: {.rear_face_x} + {.rail_slot0_from_rear}
Worked out 0.175 in ± 0.045 in used
{.rear_face_x} + {.rail_slot0_from_rear}, harvested
Its rail's front end ahead of its last slot's centre0.5 in ± 0.02 in 12.7 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.5 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the rail's front end (its near corner at px 2066, 10 px nearer the lens's column in the mid-plane) ahead of the foremost slot's centre (px 1993.5): 62.5 px at 50.3 px a pitch, 1.243 pitches, 0.489 in; the left photo reads 1.282 pitches, 0.505 (m2.py, m4.py)
Its rail, end to end14.91 in ± 0.03 in 378.7 mmProvisionalWorked out: {.rail_slot0_from_rear} + ({.rail_slots} - 1) * {std.picatinny.slot_pitch} + {.rail_front_from_last_slot}
Worked out 14.91 in ± 0.03 in used
{.rail_slot0_from_rear} + ({.rail_slots} - 1) * {std.picatinny.slot_pitch} + {.rail_front_from_last_slot}, harvested
Its muzzle end: how far behind the side faces' tips the bottom flat ends0.48 in ± 0.05 in 12.2 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.48 in ± 0.05 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the bottom edge leaves its line at px 2014 and the side face's tip is at px 2080, each brought to the mid-plane about the lens's column at its own depth (k 1.0075 and 1.021): 55.4 px at 127.3 px/in, 0.435 in; the left photo, the same way, 0.525 (m4.py)
The muzzle end is cut to a blunt point: the side faces run furthest forward, the upper faces slope back to the neck's front under the rail's end, and the lower faces and the bottom slope back further. The two photos differ by 0.09 in here, more than anywhere else: the value is between them.
M-LOK slots on each side face (3 and 9 o'clock)7ProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 7 count used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: none: a count. Read by the light through the middle row (row 764): seven long runs 199 to 207 px apart and one short one behind them (px 507 to 554); the same seven and one on the left photo (row 738) (m2.py)
Seven full slots; behind the rearmost, where an eighth would be, a short cut 0.64 in long takes the front half of the place and a sling socket stands behind it (short_slot_length, socket_from_rear). The maker: "Seven Sides of M-Lok".
M-LOK slots on each of the four faces at 45 degrees8ProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 8 count used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: none: a count. Read by the light through the upper row (row 701) and the lower row (row 824): eight runs each, the front seven over the side row's seven and one more behind them; eight and eight on the left photo (rows 675 and 798) (m2.py)
M-LOK slots on its underside (6 o'clock)7ProvisionalPhoto: Wing Tactical's gallery for the M-LOK Combat Rail, 57933: a Combat Rail seen from below and behind, its clamp lug near, 1280 x 1280; which of its four lengths isn't stated
Photo 7 count used
Wing Tactical's gallery for the M-LOK Combat Rail, 57933: a Combat Rail seen from below and behind, its clamp lug near, 1280 x 1280; which of its four lengths isn't stated, harvested
Scale: none: a count. Read by the underside's row, in line with the split of the clamp lug: a short cut, then six long slots in view and the seventh's rear end at the muzzle end, each beside one of the lower face's (whose eighth is likewise at the muzzle end)
As the side faces: seven full slots and a short cut behind them, ahead of the clamp lug. Counted on a view of a Combat Rail from below whose length isn't stated; it shows eight slots on the lower faces as this length's level photos do, and the underside's long slots stand beside the lower faces' second to eighth.
The faces at 45 degrees: their rearmost M-LOK slot (its centre) ahead of the rear face2.655 in ± 0.03 in 67.4 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 2.655 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the upper row's slots' own ends (the end of each run of light on the lens's side): front ends at S 6.754, 10.752, 14.762, 18.755 and rear ends at 23.556, 27.551, 31.529 once brought to the mid-plane (k 1.0173 from their own spacing): centres at 5.17 + 4n pitches, the rearmost 6.745 pitches ahead of the rail's rear end (m2.py)
The side faces' and the underside's rearmost full M-LOK slot (its centre) ahead of the rear face4.23 in ± 0.03 in 107.4 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 4.23 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the middle row's slots' own ends: front ends at S 6.782, 10.767, 14.781, 18.779 and rear ends at 23.543, 27.544, 31.546 (k 1.021 from their own spacing; the slots 3.24 pitches long for the standard's 3.2): full slots' centres at 9.17 + 4n pitches, the rearmost 10.745 ahead of the rail's rear end. The left photo: rear ends at 19.553, 23.558, 27.557, 31.554 and front ends at 6.801, 10.783, 14.792 (m2.py)
One M-LOK pitch (40 mm) ahead of the other faces' rearmost: the rows stand in line, and the side faces and the underside lack the first.
The faces at 45 degrees: their rearmost M-LOK slot (its centre) ahead of the receiver's front face2.21 in ± 0.05 in 56.1 mmProvisionalWorked out: {.rear_face_x} + {.mlok_diag_slot0_from_rear}
Worked out 2.21 in ± 0.05 in used
{.rear_face_x} + {.mlok_diag_slot0_from_rear}, harvested
The side faces' and the underside's rearmost full M-LOK slot (its centre) ahead of the receiver's front face3.785 in ± 0.05 in 96.1 mmProvisionalWorked out: {.rear_face_x} + {.mlok_side_slot0_from_rear}
Worked out 3.785 in ± 0.05 in used
{.rear_face_x} + {.mlok_side_slot0_from_rear}, harvested
The short cut behind the side faces' and the underside's slots, its length0.64 in ± 0.04 in 16.3 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.64 in ± 0.04 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by its front end at S 6.78 (its own edge) and its rear end at 5.17 (the far wall's edge of the light, brought back by k 0.975): 1.61 pitches; the left photo reads 6.83 and 5.15 (m2.py)
As wide as an M-LOK slot and about half as long, its front end where an eighth slot's would be (one M-LOK pitch behind the first full slot's). Not offered as a place to mount: no page says what it takes.
The upper rows of slots, their middle line above the bore0.51 in ± 0.02 in 13 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.51 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots beside the lens's column, 1.7% more at this face's depth: 131.2 px/in. Read by the middle of the light through the upper row (rows 693 to 709: 701), 0.479 above the bore; the light passes a slot cut square through a wall 0.1 in thick at 45 degrees only over its inner 0.125 in of height, so the slot's own middle on the face is 0.035 further from the bore (m2.py)
A line from the bore meets an upper face square on 0.53 in above the bore: the row reads 0.02 nearer the side face.
The lower rows of slots, their middle line below the bore0.5 in ± 0.02 in 12.7 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.5 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots beside the lens's column, 1.4% more at this face's depth: 130.8 px/in. Read by the middle of the light through the lower row (rows 816 to 833: 824.5), 0.464 below the bore, and 0.035 further for the wall's thickness as on the upper rows (m2.py)
A line from the bore meets a lower face square on 0.53 in below the bore: the row reads 0.03 nearer the side face.
The room inside its faces, from a face in to the barrel (what an M-LOK accessory's nuts may take)No value yetMissingNo source yet
Not sourced: it depends on the barrel and gas block under it, other parts. Its walls are 0.1 in by the maker's two figures (1.5 outside, 1.3 inside).
The round holes through the neck under the rail, their diameter0.24 in ± 0.01 in 6.1 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.24 in ± 0.01 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the light through the hole at the lens's column: 0.61 pitch long (rows 639 to 669: 31 px tall, the same); 0.613 on the left photo (m2.py)
Those holes' centres below the rail's top0.36 in ± 0.015 in 9.1 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.36 in ± 0.015 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots beside the lens's column, 1% more at the neck's wall: 130.3 px/in. Read by the middle of the light through the holes (row 654), 0.6065 above the principal row, below the rail's top (0.9665 above it) (m2.py)
Those holes, a side32ProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 32 count used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: none: a count. Read by the runs of light along row 654: 32, their middles at S 4.003, 5.000, ... 34.99 (each on a rail slot's centre within 0.02 pitch); 32 on the left photo, on the same slots (m2.py)
One under each of the rail's slots from the fifth to the thirty-sixth: none under the first four, where the neck carries the maker's marks.
The rearmost of those holes ahead of the rail's rearmost slot1.576 in ± 0.01 in 40 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 1.576 in ± 0.01 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the rearmost hole's light, its middle at S 4.003: under the rail's fifth slot (m2.py)
The sling sockets (their centres) ahead of the rear face1.9 in ± 0.03 in 48.3 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 1.9 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the socket's round hole, its centre at px (375, 762) on a 3x crop: S 3.24 at k 1.021, 4.81 pitches ahead of the rail's rear end; the left photo reads S 3.26 (px 1816, where light shows through both sockets) (m2.py)
The maker: "Two Integral Anti-Rotation QD Sling Sockets". One in each side face, on the line of the side rows of slots, in a shallow flat cut across the face.
A sling socket's hole, its diameter0.365 in ± 0.02 in 9.3 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.365 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end (49.35 px a pitch), 2.1% more on the near side face: 128 px/in. Read by the dark round hole, 46.7 px across on a 3x crop
The flat cut across each side face round its sling socket, its length0.62 in ± 0.04 in 15.7 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.62 in ± 0.04 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the cut's two ends at px 333 and 413 on a 3x crop: S 2.40 and 3.99 at k 1.021
Between the plain panel at the rear end and the first slots the side face is cut a little lower over the whole of its height, the socket in the middle of the cut, its two ends sloped.
That cut's depth below the side face0.035 in ± 0.015 in 0.9 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.035 in ± 0.015 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end, on the near side face: 128 px/in. Read by the upper crease 3 to 5 px lower over the cut than on the panel behind it, on a 3x crop
Weakly read: by how far the side face's two creases step toward each other where the cut is (a cut into a face between two faces at 45 degrees moves each crease by its own depth).
The blind pocket at the rear of each face at 45 degrees (its centre) ahead of the rear face1.1 in ± 0.03 in 27.9 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 1.1 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the upper face's pocket from px 196.7 to 358.3 on a 3x crop: S -0.386 to 2.834 at k 1.0167, its middle 2.80 pitches ahead of the rail's rear end; the lower face's pocket stands at the same columns
Where a ninth slot would be, one M-LOK pitch behind the rearmost, each face at 45 degrees has a shallow pocket of a slot's length that doesn't go through. The side faces have a shorter one with the maker's mark in it (pocket_side_from_rear).
That pocket's length1.27 in ± 0.03 in 32.3 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 1.27 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by S -0.386 to 2.834: 3.22 pitches (an M-LOK slot is 3.2)
That pocket's width on its face0.33 in ± 0.03 in 8.4 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.33 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end, 1.7% more at this face's depth: 129.6 px/in. Read by 30 px tall on the level photo (rows 681.7 to 711.7), the face seen at 45 degrees
The blind pocket at the rear of each side face (its centre) ahead of the rear face0.815 in ± 0.03 in 20.7 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.815 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the pocket with the maker's mark from px 191.7 to 281.7 on a 3x crop: S -0.398 to 1.39 at k 1.021, its middle 2.07 pitches ahead of the rail's rear end, on the line of the side rows of slots (rows 745 to 781.7)
That pocket's length0.7 in ± 0.03 in 17.8 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.7 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by S -0.398 to 1.39: 1.79 pitches
That pocket's width (up and down the side face)0.28 in ± 0.02 in 7.1 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.28 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end, 2.1% more on the near side face: 130.2 px/in. Read by rows 745 to 781.7: 36.7 px (an M-LOK slot's width)
Those pockets' depth0.02 in ± 0.01 in 0.5 mmProvisionalPhoto: the maker's gallery, MI-CRM4.5-2: the 4.5 in Combat Rail seen from its right and behind, 883 x 697
Photo 0.02 in ± 0.01 in used
the maker's gallery, MI-CRM4.5-2: the 4.5 in Combat Rail seen from its right and behind, 883 x 697, harvested
Scale: its own rail's slots in that view: about 178 px/in along it. Read by the lit wall along the upper edge of each pocket, 1.5 to 2 px wide seen from about 45 degrees: 0.01 to 0.03 in
The rear end is the same on every length of this handguard.
Weakly read: the pockets' walls show as a line a pixel or two wide in every oblique view; nothing on file measures them. Shallow against a wall of 0.1 in.
The small scallops along the side faces' and the bottom's edges, each one's length0.22 in ± 0.03 in 5.6 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.22 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end, 2.1% more on the near side face: 129.6 px/in. Read by each scallop 27 to 33 px long on a 3x crop of the muzzle end
A shallow round-bottomed cut across each crease every 20 mm (half an M-LOK pitch), at the slots' middles and at the bars between them, from the first slot of the faces at 45 degrees to the muzzle end: sixteen by those stations. Read at the two ends of the row (S 5.3 and 7.3 on a crop of the rear end; 29.2 to 35.2 on one of the muzzle end); the ones between are seen at the same spacing and not each measured.
Each scallop's reach into the side face from its edge0.03 in ± 0.01 in 0.8 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.03 in ± 0.01 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end, 2.1% more on the near side face: 129.6 px/in. Read by each scallop 4 px tall on the side face on a 3x crop of the muzzle end
Scallops along each crease16ProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 16 count used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: none: a count by stations. Read by one every two rail pitches from S 5.17 (seen at 5.3 and 7.3 on the rear end's crop, uncorrected for depth) to S 35.17 (seen at 29.2, 31.2, 33.2 and 35.2 on the muzzle end's): sixteen stations
The clamp lug under the rear end, its bottom below the bore1.135 in ± 0.02 in 28.8 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 1.135 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end, the lens's bend taken across the rifle at a third of what it is along it: 128.4 px/in. Read by the lug's bottom edge (row 908) below the bore's row there (762.7): 145.3 px, 1.132; the left photo: 146.5 px, 1.141 (m4.py)
A block under the bottom flat at the rear end, split along its middle, drawn together round the barrel nut by the two clamp screws.
Height over all, the rail's top to the clamp lug's bottom2.355 in ± 0.03 in 59.8 mmProvisionalWorked out: {.rail_top_above_bore} + {.lug_bottom_below_bore}
Worked out 2.355 in ± 0.03 in used
{.rail_top_above_bore} + {.lug_bottom_below_bore}, harvested
What the level side outline's height is scaled by: the published height carried down to the lug by the photo's own reading of it.
The lug's rear lower corner, its round0.13 in ± 0.03 in 3.3 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.13 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 128.4 px/in. Read by the lug's rear edge leaves its line at row 889 and its bottom edge begins at px 170, 17 px on from the rear edge (px 153) and 18 px down (m4.py)
The lug's flat underside, its front end ahead of the rear face1.24 in ± 0.03 in 31.5 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 1.24 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by where the lug's bottom edge begins to rise (px 307; 313.9 in the mid-plane) ahead of the rail's rear end (155.1): 1.270 in; the left photo reads 1.216 (m4.py)
The lug's front ramp, where it meets the bottom flat, ahead of the rear face1.64 in ± 0.03 in 41.7 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 1.64 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by where the ramp reaches the tube's bottom edge (px 355; 361.6 in the mid-plane): 1.651 in ahead of the rail's rear end; the left photo reads 1.632 (m4.py)
The lug's width (across its two halves)0.51 in ± 0.04 in 13 mmProvisionalPhoto: Wing Tactical's gallery for the M-LOK Combat Rail, 58126: a Combat Rail seen from behind and its right, the rear end near, 1280 x 1280; which of its four lengths isn't stated
Photo 0.51 in ± 0.04 in used
Wing Tactical's gallery for the M-LOK Combat Rail, 58126: a Combat Rail seen from behind and its right, the rear end near, 1280 x 1280; which of its four lengths isn't stated, harvested
Scale: the body's width on its rear face (this ledger's width over 590 px on a 3.5x crop). Read by the lug's rear face under the barrel nut, about 200 px across its two halves
The rear end is the same on every length of this handguard.
About the bottom flat's own width (0.48 in between its broken corners on a regular octagon 1.5 in across), and what a 10-32 x 1/2 screw's half inch of thread has to cross.
The split along the lug's underside, its width0.08 in ± 0.03 in 2 mmProvisionalPhoto: Wing Tactical's gallery for the M-LOK Combat Rail, 58126: a Combat Rail seen from behind and its right, the rear end near, 1280 x 1280; which of its four lengths isn't stated
Photo 0.08 in ± 0.03 in used
Wing Tactical's gallery for the M-LOK Combat Rail, 58126: a Combat Rail seen from behind and its right, the rear end near, 1280 x 1280; which of its four lengths isn't stated, harvested
Scale: the body's width on its rear face (this ledger's width over 590 px on a 3.5x crop). Read by the dark gap in the middle of the lug's rear face, about 30 px wide
The rear end is the same on every length of this handguard.
The torque plate stands in it (the maker's sheet: "Drop the torque plate into the slot in the handguard").
The rear clamp screw (its axis) ahead of the rear face0.427 in ± 0.02 in 10.8 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.427 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the rear head's centre (px 198.3 on a 3x crop) as S -0.497 at k 1.01, 1.078 pitches ahead of the rail's rear end: 0.424; the left photo's rear hole reads 0.429 (m4.py)
The maker's sheet: "the (2) 10-32 x ½” socket head cap screws from the rear of the handguard". Their heads stand on the lug's right side; their ends show in two holes on its left.
The front clamp screw (its axis) ahead of the rear face0.985 in ± 0.02 in 25 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.985 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch), each column read as a rail coordinate. Read by the front head's centre (px 268.3 on a 3x crop) as S 0.915 at k 1.01: 0.980; the left photo's front hole reads 0.990. The two are 0.556 and 0.561 apart (m4.py)
The clamp screws' axes below the bore0.887 in ± 0.02 in 22.5 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.887 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 128.4 px/in. Read by the two heads' centres (rows 876.7 and 875) below the bore's row there (762.7): 0.881; the left photo's two holes, 0.893 (m4.py)
A clamp screw's shank, its diameter0.19 in ± 0.03 in 4.8 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.19 in ± 0.03 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 126.2 px/in. Read by each screw's end in its hole on the lug's left side: the hole 28 px across with its broken edge, the screw's end inside it 22 to 25 px, on a 3.5x crop
The maker names the screws 10-32 (a No. 10 thread). Read on the photo, not taken from a thread table.
A clamp screw's length under its head0.5 in ± 0.03 in 12.7 mmConfirmedPublished: Midwest Industries, Free Float Hand Guard Installation Instructions (one page), step 8, the maker, read Oct 12, 2026
Published “(2) 10-32 x ½” socket head cap screws” used
Midwest Industries, Free Float Hand Guard Installation Instructions (one page), step 8, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
A clamp screw's head, its diameter0.31 in ± 0.02 in 7.9 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.31 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 128.4 px/in. Read by each head 40 px across on a 3x crop
A clamp screw's head, how far it stands off the lug's right side0.17 in ± 0.04 in 4.3 mmProvisionalPhoto: Wing Tactical's gallery for the M-LOK Combat Rail, 57933: a Combat Rail seen from below and behind, its clamp lug near, 1280 x 1280; which of its four lengths isn't stated
Photo 0.17 in ± 0.04 in used
Wing Tactical's gallery for the M-LOK Combat Rail, 57933: a Combat Rail seen from below and behind, its clamp lug near, 1280 x 1280; which of its four lengths isn't stated, harvested
Scale: each head's own diameter in that view (this ledger's screw_head_d). Read by each head stands a half to six tenths of its diameter off the lug on a 7x crop
The rear end is the same on every length of this handguard.
A clamp screw's hexagon socket, across its flats0.155 in ± 0.02 in 3.9 mmProvisionalPhoto: Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467
Photo 0.155 in ± 0.02 in used
Primary Arms' gallery for MI-CRM-15.0, MI-CRM-15.0_01.jpg: the handguard alone, its right side seen level, muzzle to the right, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 128.4 px/in. Read by the dark hexagon in each head, 19 to 20 px across on a 3x crop (half the head's 40)
Its barrel nut, its outside diameter (the round bore at the handguard's rear end)1.345 in ± 0.03 in 34.2 mmCorroboratedPhoto: the maker's gallery, MI-CRM7-2: the 7 in Combat Rail with its barrel nut, torque plate, wrench, polymer rail and keys laid out, 1192 x 980
Photo 1.345 in ± 0.03 in used
the maker's gallery, MI-CRM7-2: the 7 in Combat Rail with its barrel nut, torque plate, wrench, polymer rail and keys laid out, 1192 x 980, harvested
Scale: the receiver's barrel-nut thread, its minor diameter (bcm-m4-upper.thread_minor_d: 1.1803 in), which the nut's thread crests stand on. Read by the nut's rim, its long axis 760 px on a 3x crop, the ring between the knurl and the thread's crests about 45 px wide each side: the crests' circle 0.88 of the outside, 1.341 in; 0.865 to 0.895 by a few pixels either way
One nut for every length (the maker's pictures show the same one with each).
Photo 1.41 in ± 0.05 in
Wing Tactical's gallery for the M-LOK Combat Rail, 58126: a Combat Rail seen from behind and its right, the rear end near, 1280 x 1280; which of its four lengths isn't stated, harvested
Scale: the body's width on its rear face (this ledger's width over 590 px on a 3.5x crop). Read by the nut's rim, 555 px across, in a view from the side of the rear face: the two aren't in one plane (the nut stands a little proud) and the body's far edge is hidden
The rear end is the same on every length of this handguard.
A ratio on the nut itself, seen nearly end on, over a thread the Army's drawing sizes; the oblique view of the rear end reads 0.065 more, which would leave 0.045 in of wall at the side faces and stand in the gas tube's way (its underside is 0.69 in above the bore by std.ar15.gas_tube_above_bore and a tube's 0.18; the maker's nut needs "no timing", Primary Arms, so the tube passes over it).
The nut fills the rear end's round bore, which is larger than the 1.3 in the maker gives for the inside: the walls are thinnest there. Read as a ratio on the nut laid out beside the handguard: its rim, between the knurl and the crests of its thread, is 0.06 of its diameter wide, and those crests stand on the receiver thread's minor diameter (bcm-m4-upper.thread_minor_d, the Army's 1¼-18).
Its barrel nut's threaded bore (the receiver thread it goes over)1.244 in ± 0.01 in 31.6 mmConfirmedWorked out: {bcm-m4-upper.thread_major_d}
Worked out 1.244 in ± 0.01 in used
{bcm-m4-upper.thread_major_d}, harvested
The maker's sheet: "Screw the barrel nut onto the upper receiver threads". Taken as the receiver thread's major diameter (the Army's 1¼-18 UNEF, 1.244 in after anodize: bcm-m4-upper.thread_major_d), which is what the nut has to go over and what its ring is drawn round; its own thread's crests stand inside that (nut_od's reading).
Its barrel nut's length1.12 in ± 0.1 in 28.4 mmProvisionalPhoto: the maker's gallery, MI-CRM7-2: the 7 in Combat Rail with its barrel nut, torque plate, wrench, polymer rail and keys laid out, 1192 x 980
Photo 1.12 in ± 0.1 in used
the maker's gallery, MI-CRM7-2: the 7 in Combat Rail with its barrel nut, torque plate, wrench, polymer rail and keys laid out, 1192 x 980, harvested
Scale: the nut's own outside diameter in that view (this ledger's nut_od over 760 px). Read by the nut seen with its axis 38 degrees off the line of sight (its rim's short axis 0.79 of the long one): its two rims' centres 387 px apart, 628 px along the axis: 0.83 of its diameter
One nut for every length.
Its torque plate, its length1 in ± 0.05 in 25.4 mmProvisionalPhoto: the maker's gallery, MI-CRM7-2: the 7 in Combat Rail with its barrel nut, torque plate, wrench, polymer rail and keys laid out, 1192 x 980
Photo 1 in ± 0.05 in used
the maker's gallery, MI-CRM7-2: the 7 in Combat Rail with its barrel nut, torque plate, wrench, polymer rail and keys laid out, 1192 x 980, harvested
Scale: its two holes' centres (the clamp screws' spacing, 0.558 in by this ledger, over 295 px on a 3x crop). Read by the plate 530 px long
One plate for every length.
A flat steel plate with two holes for the clamp screws and a round post on its upper edge, which stands in the split of the lug with the post in the groove round the barrel nut.
Its torque plate, its height without the post0.36 in ± 0.04 in 9.1 mmProvisionalPhoto: the maker's gallery, MI-CRM7-2: the 7 in Combat Rail with its barrel nut, torque plate, wrench, polymer rail and keys laid out, 1192 x 980
Photo 0.36 in ± 0.04 in used
the maker's gallery, MI-CRM7-2: the 7 in Combat Rail with its barrel nut, torque plate, wrench, polymer rail and keys laid out, 1192 x 980, harvested
Scale: its two holes' centres (0.558 in over 295 px on a 3x crop). Read by the plate 190 px tall
One plate for every length.
Its torque plate, its thickness0.06 in ± 0.02 in 1.5 mmProvisionalPhoto: the maker's gallery, MI-CRM7-2: the 7 in Combat Rail with its barrel nut, torque plate, wrench, polymer rail and keys laid out, 1192 x 980
Photo 0.06 in ± 0.02 in used
the maker's gallery, MI-CRM7-2: the 7 in Combat Rail with its barrel nut, torque plate, wrench, polymer rail and keys laid out, 1192 x 980, harvested
Scale: its two holes' centres (0.558 in over 295 px on a 3x crop). Read by the plate's lower edge, 25 to 35 px thick seen a little from below; inside the lug's split (clamp_gap_width)
One plate for every length.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $209.95 Black Nov 21, 2026, in stock that day
- Midwest Gun Works $209.95 Black Nov 21, 2026, in stock that day
- AR15Discounts $209.95 Black Nov 21, 2026, stock not said
- Right To Bear $279.99 Black Nov 21, 2026, in stock that day
- BCM $199.95 Black Nov 21, 2026, out of stock that day
- Dirty Bird Industries $209.95 Black Nov 21, 2026, out of stock that day