Light
SureFire Scout Light Pro Dual Fuel
SureFire's 6-volt Dual Fuel Scout Light Pro with the Z68 click tail cap: 1,500 lumens on the SF18650 cell it comes with, 1,200 on two 123A. Its Low-Profile Mount pivots, and it comes with a cleat for a MIL-STD-1913 rail and one for M-LOK. Black (M640DF-BK-PRO) and tan (M640DF-TN-PRO).

- Weight
- 5.5 oz ± 0.05 oz Confirmedpublished: SureFire, Scout Light Pro Dual Fuel, specifications (Body), the maker, read Oct 5, 2026
- Lowest price
- $269.99 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- M640DF-BK-PRO
- Colours
- Black, Tan
- Drawn as
- modelled
- Maker's page
- surefire.com
In “Aero 5.56 carbine, fitted out”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length5.56 in ± 0.005 in 141.2 mmConfirmedPublished: SureFire, Scout Light Pro Dual Fuel, specifications (Body), the maker, read Oct 5, 2026
Published “LENGTH 5.56 in (14.1 cm)” used
SureFire, Scout Light Pro Dual Fuel, specifications (Body), the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Taken as the bezel's front to the tail cap's rear rim, along the axis: the photos' proportions bear that reading out (.head_diameter). Midwest Gun Works, Sportsman's Warehouse and T.REX ARMS repeat it.
Head (bezel) diameter1.125 in ± 0.0005 in 28.6 mmConfirmedPublished: SureFire, Scout Light Pro Dual Fuel, specifications (Body), the maker, read Oct 5, 2026
Published “BEZEL DIAMETER 1.125 in (2.9 cm)” used
SureFire, Scout Light Pro Dual Fuel, specifications (Body), the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Taken as the bezel's smooth front section (the length of the head ahead of its faceted ring), not the ring, which is wider (.ring_diameter). Tried against the published length on three side photos, the lit edges kept: on Rifle Supply's (5911a4468ee0), with heights by this diameter and each end face taken behind its rim's arc, the faces stand 5.518 in apart, 0.8% short of the published 5.56 (the trace's own check: it stops past 2%). End to end with no correction the silhouettes read 5.627 in there, 5.740 on SureFire's left profile (240f795d3e2a) and 5.777 on Primary Arms' photograph (5aa1d5cc4968): 1 to 4% long, as near rims standing toward a close lens make them. Read as the ring instead (1.05 of this section in all three), the two published sizes would be 4 to 6% apart on every photo.
Body diameter0.843 in ± 0.006 in 21.4 mmCorroboratedPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000
Photo 0.843 in ± 0.006 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000, harvested
Scale: the bezel's front section in the same photo as .head_diameter (1.125 in over 0.86 to 0.96 of the length: 199.92 px radius). Read by tools/turned.py --dark-above 235: median radius over 0.41 to 0.635 of the length, both edges (149.82 px, ratio 0.7494 of the bezel's); ± the two sections' scatter and half a pixel an edge
Photo 0.845 in ± 0.007 in
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: the bezel's front section in the same photo as .head_diameter (146.99 px radius). Read by tools/turned.py --dark-above 235 --flip: median radius over 0.43 to 0.6 of the length, both edges (110.42 px, ratio 0.7512)
Photo 0.853 in ± 0.006 in
Primary Arms' own photograph, M640DF-BK-PRO_01: the body without a mount, side view on white, 2200 x 1467, harvested
Scale: the bezel's front section in the same photo as .head_diameter (178.00 px radius). Read by tools/turned.py --dark-above 235: median radius over 0.43 to 0.635 of the length, both edges (134.91 px, ratio 0.7579); the photo leans 1.5 degrees, taken out by the fitted axis
The largest and sharpest of the three, and the photo the outline is traced from. SureFire's newer profile agrees within 0.002 in; Primary Arms' own photograph of a unit reads 0.010 more, inside the two ±.
Not published. The tube between the head and the body's bands, by its ratio to the bezel in three side photos (tools/turned.py at level 235: ratios of radii are true whatever the lens's distance). 0.845 in is 21.5 mm: 1.4 mm of wall round an 18.6 mm cell.
Tail cap's shroud diameter0.989 in ± 0.008 in 25.1 mmCorroboratedPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000
Photo 0.989 in ± 0.008 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000, harvested
Scale: the bezel's front section in the same photo as .head_diameter (199.92 px radius). Read by tools/turned.py --dark-above 235: median radius over 0.012 to 0.058 of the length, both edges (175.77 px, ratio 0.8792)
Photo 0.995 in ± 0.007 in
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: the bezel's front section in the same photo as .head_diameter (146.99 px radius). Read by tools/turned.py --dark-above 235 --flip: median radius over 0.02 to 0.058 of the length, top edge (130.04 px, ratio 0.8847)
Photo 0.983 in ± 0.005 in
Primary Arms' own photograph, M640DF-BK-PRO_01: the body without a mount, side view on white, 2200 x 1467, harvested
Scale: the bezel's front section in the same photo as .head_diameter (178.00 px radius). Read by tools/turned.py --dark-above 235: median radius over 0.02 to 0.058 of the length, top edge (155.56 px, ratio 0.8739)
The photo the outline is traced from; the other two read 0.006 either side of it.
Not published. The Z68 tail cap's rear shroud, by its ratio to the bezel: what the trace takes the rear end face's rim to be.
The body's axis above the mounting face (the rail's top, the handguard's face)0.19 in ± 0.06 in 4.8 mmProvisionalPhoto: SureFire's M-1913-S page, M-1913-S-TN_isoL: the Picatinny mount alone in tan, three-quarter view, 1500 x 1500
Photo 0.19 in ± 0.06 in used
SureFire's M-1913-S page, M-1913-S-TN_isoL: the Picatinny mount alone in tan, three-quarter view, 1500 x 1500, harvested
Scale: the pivot barrel's end face in the same photo, 208 px across where it is 415 px tall: its diameter is .ear_bottom_below_axis less .pivot_top_below_axis (0.360 in). Read by the fixed hook's V, in the barrel's own end plane: its apex (column 355) 139 px from the barrel's centre (494), 0.668 of the barrel's diameter (0.236 in: .rail_corner_below_pivot), and its upper wall running 28 px (0.05 in) toward the plate before the end face turns away: 0.236 less 0.05; by hand. ± covers the readings and that the wall's run is a least figure for a rail's corner
For the Picatinny mount on a rail as SureFire photographs it (hanging straight from its pivot): the body then stands BESIDE the rail, 1.12 in from its centre line (.rail_centre_below_axis), and this is how far its axis, and the pivot's, stand above the rail's top. The clamp holds a rail by its two corners (a V in each jaw) and its plate rides clear of the rail's top, so the rail's top is its corner's height (.rail_corner_below_pivot) less how far a rail's corner lies below its top. That last figure is MIL-STD-1913's and isn't on file: the hook's wall above the corner runs 0.05 in in the photo, which is the least it can be, so this is the most the axis can stand above the rail (with a deeper corner, less: about 0.06 in less if the corner is 0.11 in down). On the M-LOK mount, as photographed, the body stands over the face instead: .mlok_pivot_above_face plus the pivot's distance below the axis.
A rail's corner (the fixed hook's V) below the pivot's axis, across the Picatinny mount0.236 in ± 0.03 in 6 mmProvisionalPhoto: SureFire's M-1913-S page, M-1913-S-TN_isoL: the Picatinny mount alone in tan, three-quarter view, 1500 x 1500
Photo 0.236 in ± 0.03 in used
SureFire's M-1913-S page, M-1913-S-TN_isoL: the Picatinny mount alone in tan, three-quarter view, 1500 x 1500, harvested
Scale: the pivot barrel's end face in the same photo, 208 px across (0.360 in). Read by the V's apex at column 355 against the barrel's centre at 494, both in the barrel's end plane: 139 px, 0.668 of its diameter; by hand
Where the clamp holds the rail's near corner, measured out of the plate (toward the rail). Along the plate the same V is 0.05 in from the pivot's axis, which with a rail's 0.835 in puts the rail's centre line where the two jaws' lips have it in the right profile (.rail_centre_below_axis).
Width of the recoil bar under the Picatinny mount's plate (along the rail)0.2 in ± 0.01 in 5.1 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileR: the light on its Picatinny mount, right side, the mount's rail side toward the lens, 1500 x 1500
Photo 0.2 in ± 0.01 in used
SureFire's gallery, M640DF-BK-PRO-profileR: the light on its Picatinny mount, right side, the mount's rail side toward the lens, 1500 x 1500, harvested
Scale: the body's two bands either side of the mount in the same photo, .band_rear_x and .band_front_x apart: 266.7 px/in there. Read by the bar's two edges across six rows (860 to 960): columns 423 and 476.5, 53.5 px; by hand on the pixel values
The bar that sits in a rail's slot: it has to be narrower than the slot (std.picatinny.slot_width, 0.206 in), and reads just that. It is also what says the right profile's scale is right: by the bezel's published diameter read at the old threshold it came out 0.225 in, wider than any slot.
Overall width (with its mount and switch)No value yetMissingNo source yet
Not published, and it changes as the mount is swivelled.
M-LOK slots its mount's lugs span1ProvisionalPhoto: SureFire's M-MLOK-S page, M-MLOK-S-BK_isoL: the M-LOK mount alone from above, 1500 x 1500
Photo 1 count used
SureFire's M-MLOK-S page, M-MLOK-S-BK_isoL: the M-LOK mount alone from above, 1500 x 1500, harvested
Scale: the mount's pivot barrel, 0.553 in long by the left profile photo. Read by the two screws stand 1.16 barrel lengths apart (0.64 in; three photos): well under a 32 mm slot's length, and far from the 40 mm between two slots
No page on file states it, and the sheet SureFire is said to enclose (Magpul's) isn't on file. Worked out from the mount's photos: two screws with T-nuts about 0.64 in apart (.mlok_screw_spacing) on a base about 1.04 in long: both nuts go in one 32 mm slot.
Reach inside the handguard (below the mounting face, tightened)No value yetMissingNo source yet
Not sourced: no page on file gives the M-MLOK-S's nuts a figure, and the Magpul sheet SureFire's box is said to enclose isn't on file.
Weight of the Picatinny mount sold apart (M-1913-S)1.6 oz ± 0.05 ozConfirmedPublished: SureFire, M-1913-S-BK Scout Light Pro Picatinny Mount, Key Attributes, the maker, read Oct 5, 2026
Published “WEIGHT 1.6 oz (45 g)” used
SureFire, M-1913-S-BK Scout Light Pro Picatinny Mount, Key Attributes, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Whether the light's 5.5 oz counts a mount isn't stated.
Weight of the M-LOK mount sold apart (M-MLOK-S)1.6 oz ± 0.05 ozConfirmedPublished: SureFire, M-MLOK-S Scout Light Pro M-Lok Mount, Key Attributes, the maker, read Oct 5, 2026
Published “WEIGHT 1.6 oz (45 g)” used
SureFire, M-MLOK-S Scout Light Pro M-Lok Mount, Key Attributes, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
The same figure as the Picatinny mount's, on a page of the same template: it may be one figure given to both.
Rear end face, ahead of the outline's rearmost point0.044 in ± 0.01 in 1.1 mmProvisionalPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000
Photo 0.044 in ± 0.01 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000, harvested
Scale: scale from surefire-scout-light-pro-dual-fuel.head_diameter = 1.125 in, the tube's own width column by column: 399.4 px over columns 1708–1752, 399.6 px over columns 1918–1955; a line through them (rms 0.27 px) changes +0.1% from column 1708 to 1955, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1000)/width, the lens's axis taken to meet the image at column 1000; 354.2 px/in there. The axis is the tube's centre line (tilt -0.20°, rms 0.06 px). Lengths then scaled by 1.0076 so that the end faces are surefire-scout-light-pro-dual-fuel.length = 5.56 in apart: at the tube's scale they read 5.518 (-0.8%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.070 in over radius 0.563 (rms 0.014), the rear end's rim sags 0.043 in over radius 0.494 (rms 0.001). Read by the min end's face: the silhouette's tip at -0.000 less its rim's arc, 0.044 in of sag at radius 0.4945 (the end is seen from 5.0° off square; arc fitted over 109 rows, rms 0.001) of the traced outline (tools/trace.py); the tail cap's rear face behind its rim's arc: the front face is the published length ahead of it
The side photo sees the tail cap's rear rim from an angle: the outline's rearmost point is the rim's near side, and the face is this far ahead of it. The front face is the published length ahead of the rear one.
Diameter of the body's two bands0.889 in ± 0.009 in 22.6 mmProvisionalPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000
Photo 0.889 in ± 0.009 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000, harvested
Scale: scale from surefire-scout-light-pro-dual-fuel.head_diameter = 1.125 in, the tube's own width column by column: 399.4 px over columns 1708–1752, 399.6 px over columns 1918–1955; a line through them (rms 0.27 px) changes +0.1% from column 1708 to 1955, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1000)/width, the lens's axis taken to meet the image at column 1000; 354.2 px/in there. The axis is the tube's centre line (tilt -0.20°, rms 0.06 px). Lengths then scaled by 1.0076 so that the end faces are surefire-scout-light-pro-dual-fuel.length = 5.56 in apart: at the tube's scale they read 5.518 (-0.8%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.070 in over radius 0.563 (rms 0.014), the rear end's rim sags 0.043 in over radius 0.494 (rms 0.001). Read by height (tooth tops, max over 0.05 in windows) along x [1.12, 1.36] of the traced outline (tools/trace.py); the rear band
Not published. The rear band (the middle one reads the same); the pivot's two ears hang under them.
Diameter of the faceted ring behind the bezel (as seen)1.178 in ± 0.009 in 29.9 mmProvisionalPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000
Photo 1.178 in ± 0.009 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000, harvested
Scale: scale from surefire-scout-light-pro-dual-fuel.head_diameter = 1.125 in, the tube's own width column by column: 399.4 px over columns 1708–1752, 399.6 px over columns 1918–1955; a line through them (rms 0.27 px) changes +0.1% from column 1708 to 1955, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1000)/width, the lens's axis taken to meet the image at column 1000; 354.2 px/in there. The axis is the tube's centre line (tilt -0.20°, rms 0.06 px). Lengths then scaled by 1.0076 so that the end faces are surefire-scout-light-pro-dual-fuel.length = 5.56 in apart: at the tube's scale they read 5.518 (-0.8%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.070 in over radius 0.563 (rms 0.014), the rear end's rim sags 0.043 in over radius 0.494 (rms 0.001). Read by height (tooth tops, max over 0.05 in windows) along x [4.5, 4.78] of the traced outline (tools/trace.py); the faceted ring behind the bezel, as this view happens to see its flats
Not published. The ring has flats, so a side view reads it between its flats and its corners, by how the head happens to be turned: 1.180 by its ratio to the bezel in Rifle Supply's photo, 1.183 in SureFire's left profile, 1.186 in Primary Arms' photograph. Wider than the published bezel diameter, which is the smooth section ahead of it (.head_diameter).
Rear band's rear edge, ahead of the outline's rearmost point1.078 in ± 0.005 in 27.4 mmProvisionalPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000
Photo 1.078 in ± 0.005 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000, harvested
Scale: scale from surefire-scout-light-pro-dual-fuel.head_diameter = 1.125 in, the tube's own width column by column: 399.4 px over columns 1708–1752, 399.6 px over columns 1918–1955; a line through them (rms 0.27 px) changes +0.1% from column 1708 to 1955, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1000)/width, the lens's axis taken to meet the image at column 1000; 354.2 px/in there. The axis is the tube's centre line (tilt -0.20°, rms 0.06 px). Lengths then scaled by 1.0076 so that the end faces are surefire-scout-light-pro-dual-fuel.length = 5.56 in apart: at the tube's scale they read 5.518 (-0.8%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.070 in over radius 0.563 (rms 0.014), the rear end's rim sags 0.043 in over radius 0.494 (rms 0.001). Read by x_min in x [0.95, 1.25] in y [0.437, 0.443] of the traced outline (tools/trace.py); the rear band's rear edge, where the top edge crosses 0.44 in off the axis
A step the other side photos are placed by.
Middle band's front edge, ahead of the outline's rearmost point2.319 in ± 0.008 in 58.9 mmProvisionalPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000
Photo 2.319 in ± 0.008 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000, harvested
Scale: scale from surefire-scout-light-pro-dual-fuel.head_diameter = 1.125 in, the tube's own width column by column: 399.4 px over columns 1708–1752, 399.6 px over columns 1918–1955; a line through them (rms 0.27 px) changes +0.1% from column 1708 to 1955, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1000)/width, the lens's axis taken to meet the image at column 1000; 354.2 px/in there. The axis is the tube's centre line (tilt -0.20°, rms 0.06 px). Lengths then scaled by 1.0076 so that the end faces are surefire-scout-light-pro-dual-fuel.length = 5.56 in apart: at the tube's scale they read 5.518 (-0.8%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.070 in over radius 0.563 (rms 0.014), the rear end's rim sags 0.043 in over radius 0.494 (rms 0.001). Read by x_max in x [2.0, 2.6] in y [0.437, 0.443] of the traced outline (tools/trace.py); the middle band's front edge, where the top edge crosses 0.44 in off the axis
A step the other side photos are placed by.
Step at the head's rear, ahead of the outline's rearmost point3.699 in ± 0.012 in 94 mmProvisionalPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000
Photo 3.699 in ± 0.012 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000, harvested
Scale: scale from surefire-scout-light-pro-dual-fuel.head_diameter = 1.125 in, the tube's own width column by column: 399.4 px over columns 1708–1752, 399.6 px over columns 1918–1955; a line through them (rms 0.27 px) changes +0.1% from column 1708 to 1955, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1000)/width, the lens's axis taken to meet the image at column 1000; 354.2 px/in there. The axis is the tube's centre line (tilt -0.20°, rms 0.06 px). Lengths then scaled by 1.0076 so that the end faces are surefire-scout-light-pro-dual-fuel.length = 5.56 in apart: at the tube's scale they read 5.518 (-0.8%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.070 in over radius 0.563 (rms 0.014), the rear end's rim sags 0.043 in over radius 0.494 (rms 0.001). Read by x_min in x [3.5, 3.9] in y [0.5045, 0.5105] of the traced outline (tools/trace.py); the step at the head's rear, where the top edge crosses 0.5075 in off the axis
A step the other side photos are placed by.
Where the bezel's smooth front section begins, ahead of the outline's rearmost point4.791 in ± 0.015 in 121.7 mmProvisionalPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000
Photo 4.791 in ± 0.015 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_2_HR: the body alone, straight side view on white, 2000 x 2000, harvested
Scale: scale from surefire-scout-light-pro-dual-fuel.head_diameter = 1.125 in, the tube's own width column by column: 399.4 px over columns 1708–1752, 399.6 px over columns 1918–1955; a line through them (rms 0.27 px) changes +0.1% from column 1708 to 1955, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1000)/width, the lens's axis taken to meet the image at column 1000; 354.2 px/in there. The axis is the tube's centre line (tilt -0.20°, rms 0.06 px). Lengths then scaled by 1.0076 so that the end faces are surefire-scout-light-pro-dual-fuel.length = 5.56 in apart: at the tube's scale they read 5.518 (-0.8%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.070 in over radius 0.563 (rms 0.014), the rear end's rim sags 0.043 in over radius 0.494 (rms 0.001). Read by x_min in x [4.7, 4.95] in y [0.567, 0.573] of the traced outline (tools/trace.py); where the bezel's smooth front section begins ahead of its ring: the top edge coming down through 0.57 in off the axis
A step the other side photos are placed by: the corner where the bezel's diameter is the published one.
Top of the mount's barrel, below the body's axis0.471 in ± 0.006 in 12 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500
Photo 0.471 in ± 0.006 in used
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes band_rear, band_front, head_step, bezel_rear (260.7 px/in, rms 0.003 in over 4 points). Read by −y_max of the traced outline (tools/trace.py); the top of the mount's barrel, under the white gap between it and the tube
The barrel the mount turns on sits just clear of the tube: a gap of 0.04 in shows between them. With the ears' lowest point (.ear_bottom_below_axis) it gives the pivot: its axis midway between the two, the barrel's diameter their difference.
Lowest point of the pivot's ears, below the body's axis0.831 in ± 0.006 in 21.1 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500
Photo 0.831 in ± 0.006 in used
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes band_rear, band_front, head_step, bezel_rear (260.7 px/in, rms 0.003 in over 4 points). Read by −y_min in x [1.95, 2.13] of the traced outline (tools/trace.py); the front ear's lowest point
The ears are round about the pivot and flush with the mount's barrel between them.
Rear end of the mount's barrel, ahead of the outline's rearmost point1.412 in ± 0.006 in 35.9 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500
Photo 1.412 in ± 0.006 in used
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes band_rear, band_front, head_step, bezel_rear (260.7 px/in, rms 0.003 in over 4 points). Read by x_min in y [-0.75, -0.55] of the traced outline (tools/trace.py); the rear end of the mount's barrel, against the rear ear
The rear ear's front face.
Front end of the mount's barrel, ahead of the outline's rearmost point1.965 in ± 0.007 in 49.9 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500
Photo 1.965 in ± 0.007 in used
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes band_rear, band_front, head_step, bezel_rear (260.7 px/in, rms 0.003 in over 4 points). Read by x_max in y [-0.75, -0.55] of the traced outline (tools/trace.py); the front end of the mount's barrel, against the front ear
The front ear's rear face.
Rear edge of the Picatinny mount's plate, ahead of the outline's rearmost point1.406 in ± 0.006 in 35.7 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500
Photo 1.406 in ± 0.006 in used
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes band_rear, band_front, head_step, bezel_rear (260.7 px/in, rms 0.003 in over 4 points). Read by x_min in y [-1.5, -0.9] of the traced outline (tools/trace.py); the plate's rear edge, below the ears
With .clamp_front_x: how far the clamp reaches along the rail, and where its middle is on the body.
Front edge of the Picatinny mount's plate, ahead of the outline's rearmost point1.999 in ± 0.007 in 50.8 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500
Photo 1.999 in ± 0.007 in used
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes band_rear, band_front, head_step, bezel_rear (260.7 px/in, rms 0.003 in over 4 points). Read by x_max in y [-1.5, -0.9] of the traced outline (tools/trace.py); the plate's front edge, below the ears
Underside of the Picatinny mount's moving jaw, below the body's axis1.62 in ± 0.006 in 41.1 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500
Photo 1.62 in ± 0.006 in used
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes band_rear, band_front, head_step, bezel_rear (260.7 px/in, rms 0.003 in over 4 points). Read by −y_min of the traced outline (tools/trace.py); the moving jaw's underside (the mount screw's head, 0.04 in proud of it, left out)
As SureFire photographs it, the mount hanging straight below the body.
Front face of the pivot screw's head, ahead of the outline's rearmost point2.325 in ± 0.007 in 59.1 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500
Photo 2.325 in ± 0.007 in used
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes band_rear, band_front, head_step, bezel_rear (260.7 px/in, rms 0.003 in over 4 points). Read by x_max of the traced outline (tools/trace.py); the pivot screw's head, its front face
The rail's centre line below the body's axis, the Picatinny mount hanging straight (as photographed)1.123 in ± 0.025 in 28.5 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileR: the light on its Picatinny mount, right side, the mount's rail side toward the lens, 1500 x 1500
Photo 1.123 in ± 0.025 in used
SureFire's gallery, M640DF-BK-PRO-profileR: the light on its Picatinny mount, right side, the mount's rail side toward the lens, 1500 x 1500, harvested
Scale: the body's two bands either side of the mount in the same photo: the rear band's rear edge (column 286.6) and the middle band's front edge (617.6), .band_rear_x and .band_front_x apart: 266.7 px/in there (the photo is yawed: its bezel reads 258.5). Read by rows by hand on an 8x crop: the fixed hook's lip 809.5, the moving jaw's lip 991, the body's axis 600.8: 0.783 and 1.463 in below the axis, their middle 1.123; the jaw's underside at 1034 reads 1.624, against 1.620 in the left profile
Where the clamp holds a rail: midway between the fixed hook's lip and the moving jaw's, 0.680 in apart in the photo (a rail is 0.835 across its corners, so each lip reaches 0.08 in under one). The moving jaw may stand closer in the photo than on a rail. The fixed hook alone, by the tan mount's three-quarter photo (its V 0.05 in below the pivot's axis), puts it at 1.12.
Thickness of the Picatinny mount's plate (its SF face to its rail side)0.22 in ± 0.05 in 5.6 mmProvisionalPhoto: SureFire's M-1913-S page, M-1913-S-TN_isoL: the Picatinny mount alone in tan, three-quarter view, 1500 x 1500
Photo 0.22 in ± 0.05 in used
SureFire's M-1913-S page, M-1913-S-TN_isoL: the Picatinny mount alone in tan, three-quarter view, 1500 x 1500, harvested
Scale: the pivot barrel's end face in the same photo, 208 px across where it is 415 px tall: its diameter is .ear_bottom_below_axis less .pivot_top_below_axis (0.360 in). Read by the moving jaw's end face, 130 px across (columns 405 to 535 at rows 1150 to 1230), over the barrel end's 208 px: 0.625 of its diameter. A same-direction ratio in one end plane, by hand; the photo's perspective between the mount's two ends is in the ±
Coarse. The mount's own page shows it three-quarter on; the moving jaw's end face is read against the pivot barrel's end, both foreshortened alike, though they are an inch apart down the photo. The plate's SF face runs tangent into the barrel in both colours' photos; its other face rides clear of the rail's top (.axis_above_mount).
How far the Picatinny mount's jaws reach below the rail's top0.1 in ± 0.04 in 2.5 mmProvisionalPhoto: SureFire's M-1913-S page, M-1913-S-TN_isoL: the Picatinny mount alone in tan, three-quarter view, 1500 x 1500
Photo 0.1 in ± 0.04 in used
SureFire's M-1913-S page, M-1913-S-TN_isoL: the Picatinny mount alone in tan, three-quarter view, 1500 x 1500, harvested
Scale: the pivot barrel's end face in the same photo, 208 px across (0.360 in). Read by the jaw's hook tip at column 347 against its block's face at 405 (rows 1240 to 1300): 58 px, 0.279 of the barrel's diameter; by hand
Coarse: the moving jaw's hook beyond its block's rail-side face, in the same photo and by the same ratio. The fixed hook reads deeper (its outer face 0.19 in beyond the barrel's surface) and is drawn to the same reach.
M-LOK mount: its two screws, centre to centre0.64 in ± 0.07 in 16.3 mmProvisionalPhoto: SureFire's M-MLOK-S page, M-MLOK-S-BK_isoL: the M-LOK mount alone from above, 1500 x 1500); b01c13c9399c (SureFire's gallery, isoL_MLOK: the mount loose with the pivot screw through it); d0a349018d36 (Rifle Supply, _3_HR: the mount fitted, from below
Photo 0.64 in ± 0.07 in used
SureFire's M-MLOK-S page, M-MLOK-S-BK_isoL: the M-LOK mount alone from above, 1500 x 1500); b01c13c9399c (SureFire's gallery, isoL_MLOK: the mount loose with the pivot screw through it); d0a349018d36 (Rifle Supply, _3_HR: the mount fitted, from below, harvested
Scale: the mount's pivot barrel, which lies along the screws' line: its length is .barrel_front_x less .barrel_rear_x (0.553 in, the gap between the body's ears). Read by the screws' centres over the barrel's length, both read along the same direction in each photo, by hand: 759 px over 663 (1.145), 156 over 136 (1.15), 250 over 212 (1.18, the web's length standing in for the barrel's): 1.16 of the barrel's length. The first photo is close (its parallels converge 8 degrees)
Coarse, and short of the M-LOK interval (std.mlok.interval, 20 mm = 0.787 in) by more than its ±: either SureFire's nuts stand closer, or the three photos' perspective reads the same way. Either way both nuts go in one 32 mm slot (.lugs).
M-LOK mount: width of its base0.4 in ± 0.06 in 10.2 mmProvisionalPhoto: SureFire's M-MLOK-S page, M-MLOK-S-BK_isoL: the M-LOK mount alone from above, 1500 x 1500
Photo 0.4 in ± 0.06 in used
SureFire's M-MLOK-S page, M-MLOK-S-BK_isoL: the M-LOK mount alone from above, 1500 x 1500, harvested
Scale: the two screws' centres in the same photo, 759 px apart (.mlok_screw_spacing). Read by along the screws' line: the right counterbore 370 px across and the rim beyond it 50 px, so the base's end is 235 px from the screw: 0.62 of the spacing across; by hand
Coarse. The base is an obround whose ends are round about the screws: its length is taken as the screws' spacing plus this width.
M-LOK mount: the pivot's axis above its mounting face0.4 in ± 0.1 in 10.2 mmProvisionalPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_3_HR: the M-LOK mount fitted, from the front left and below, 2000 x 2000
Photo 0.4 in ± 0.1 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_3_HR: the M-LOK mount fitted, from the front left and below, 2000 x 2000, harvested
Scale: the pivot screw's head in the same photo, 68 px tall (0.35 in across in the left profile). Read by the head's centre to the base's upper face, 48 px, and the base about 30 px thick, both read up the photo, which looks up at the mount from below: foreshortened by an angle that isn't known, hence the ±
Very coarse: no photo on file shows the mount square on from its end.
M-LOK mount: thickness of its base0.15 in ± 0.05 in 3.8 mmProvisionalPhoto: Rifle Supply's gallery, SFM640DF-BK-PRO_3_HR: the M-LOK mount fitted, from the front left and below, 2000 x 2000
Photo 0.15 in ± 0.05 in used
Rifle Supply's gallery, SFM640DF-BK-PRO_3_HR: the M-LOK mount fitted, from the front left and below, 2000 x 2000, harvested
Scale: the pivot screw's head in the same photo, 68 px tall (0.35 in across in the left profile). Read by the base's edge about 30 px up the photo, against the head's 68 px; by hand, foreshortened by an angle that isn't known
Very coarse, read with .mlok_pivot_above_face.
M-LOK mount: diameter of the counterbore round each screw0.31 in ± 0.04 in 7.9 mmProvisionalPhoto: SureFire's M-MLOK-S page, M-MLOK-S-BK_isoL: the M-LOK mount alone from above, 1500 x 1500
Photo 0.31 in ± 0.04 in used
SureFire's M-MLOK-S page, M-MLOK-S-BK_isoL: the M-LOK mount alone from above, 1500 x 1500, harvested
Scale: the two screws' centres in the same photo, 759 px apart (.mlok_screw_spacing). Read by the right counterbore along the screws' line, 370 px: 0.49 of the spacing; by hand
Coarse, read with .mlok_base_width.
Picatinny mount: diameter of the mount screw's head, at the moving jaw's end0.19 in ± 0.02 in 4.8 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500
Photo 0.19 in ± 0.02 in used
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: the `clamp` trace's frame for this photo: four of the body's steps, 260.7 px/in (rms 0.003 in). Read by the head's dark run just under the jaw (row 1032): columns 1016 to 1065, 49 px; by hand on the pixel values. It is centred on the plate (columns 968 to 1113 there)
The slotted screw that draws the jaw up; its head shows under the jaw in both profiles.
Picatinny mount: how far the mount screw's head stands out of the moving jaw0.04 in ± 0.01 in 1 mmProvisionalPhoto: SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500
Photo 0.04 in ± 0.01 in used
SureFire's gallery, M640DF-BK-PRO-profileL: the light on its Picatinny mount, left side, on white, 1500 x 1500, harvested
Scale: the `clamp` trace's frame for this photo, 260.7 px/in. Read by rows 1031 (the jaw's underside) to 1041 (the head's end): 10 px; by hand
Picatinny mount: how far the fixed hook's block reaches past the pivot's axis, away from the rail's centre0.07 in ± 0.02 in 1.8 mmProvisionalPhoto: SureFire's M-1913-S page, M-1913-S-TN_isoL: the Picatinny mount alone in tan, three-quarter view, 1500 x 1500
Photo 0.07 in ± 0.02 in used
SureFire's M-1913-S page, M-1913-S-TN_isoL: the Picatinny mount alone in tan, three-quarter view, 1500 x 1500, harvested
Scale: the pivot barrel's end face in the same photo, 415 px tall (0.360 in). Read by the hook's block begins at row 190, 82 px above the barrel's centre (272), in the barrel's end plane: 0.198 of its diameter; by hand
The fixed hook hangs under the barrel: from this far past the pivot's axis on the body's side to its lip under the rail's corner.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
M-LOK
- Uppers
- Nordic Components 22RB .22 LR upper, 16" (fit unchecked), Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12" (fit unchecked), Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16" (fit unchecked)
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 12.7" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2 (fit unchecked), Aero Precision AR15 15" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" S-ONE M-LOK Handguard (fit unchecked), Aero Precision AR15 16.6" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 7.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 9.3" R-ONE M-LOK handguard (fit unchecked), BCM MCMR-10 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-13 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-15 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK (fit unchecked), Expo Arms Free Float AR-15 Handguard - M-LOK - 15" (fit unchecked), Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 15" Super Modular Rail MK16 M-LOK (fit unchecked), Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), MAS Defense 12.62" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 15" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 9.87" NERO M-LOK FREE FLOAT (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine) (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length) (fit unchecked), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15") (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $269.99 Black Nov 21, 2026, in stock that day
- Scheels $332.00 Black Oct 5, 2026, in stock that day
- Mile High Shooting Accessories $341.00 Black Nov 21, 2026, in stock that day
- Sportsman's Warehouse $341.00 Black Nov 21, 2026, in stock that day
- KYGUNCO $341.00 Black Nov 21, 2026, in stock that day
- Alexander's Store $341.00 Black Nov 18, 2026, in stock that day
- MidwayUSA $341.00 Black Oct 30, 2026, in stock that day
- Sportsman's Warehouse $395.00 Tan Nov 21, 2026, in stock that day
- Midwest Gun Works $395.00 Tan Nov 21, 2026, in stock that day
- Alexander's Store $395.00 Tan Nov 18, 2026, in stock that day
- Rifle Supply $349.99 Black Nov 21, 2026, out of stock that day
- Rifle Supply $395.99 Tan Nov 21, 2026, out of stock that day