Handguard
BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK
BCM's polymer drop-in hand guard for a carbine-length gas system, in two halves: "Direct replacement handguard featuring simple "drop in" design. For mil-spec, non-free float M4 Carbine-type platforms"; "Natural ergonomics; slim, comfortable and lightweight, only 4.48 ounces"; "Aggressive textured area for needed traction"; "Three, three-hole M-LOK® compatible mounting slots, mounting surfaces (10:30, 1:30, and 6:00 o'clock placements)"; "Aluminum heat shield, lessening heat transfer to the handguard and shooter's hand"; "Made of an impact and temperature resistant high strength polymer"; "Patent Pending design. Made in the USA." (BCM). It goes on the rifle's own barrel nut and delta ring and the round cap behind its front sight base: no free-float nut of its own.

- Weight
- 4.48 oz Confirmedpublished: BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, the maker, read Oct 28, 2026
- Lowest price
- $30.95 at BCM, read Nov 21, 2026 (Black)
- Maker's number
- BCM-PMCR-CAR-BLK
- Colour
- Polymer black (placeholder)
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “BCM 11.5 in carbine, suppressed”, a build on the start page, in place of its BCM MCMR-10 (M-LOK® Compatible* Modular Rail). The BCM G.I. Barrel Nut - AR15 and the BCM Delta Ring Assembly - AR15 and the BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers and the BCM Handguard Cap Round - .750 AR15 go in with it: its maker says it needs them.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length, overall7.28 in ± 0.04 in 184.9 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 7.28 in ± 0.04 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the outline (luminance under 200) from its rear end (column 22, the spine's tab over the ring; the upper flange's end at 26) to its front face (column 1257): 1235 px; ± 0.5% for the slots' scatter and the depth between the slots' faces and the outline's edges
BCM states no length. From its rear end, which bears on the delta ring's lip, to its front face, which stands ahead of the front sight base's rear face (the front hook and the upper half's front chamfer included).
Width (the upper half, across its sides)1.854 in ± 0.03 in 47.1 mmCorroboratedPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 1.854 in ± 0.03 in used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by the upper half's silhouette across it at column 600 (rows 462 to 790): 328 px; ± 4 px
Photo 1.873 in ± 0.03 in
BCM's gallery photo STKL8993: the mid-length's two halves apart, the upper one from above, 1280 x 853, harvested
Scale: its own rows of four M-LOK slots, 216.1 px apart: 137.2 px/in. Read by the upper half across it at column 1019 (rows 505 to 762): 257 px; ± 4 px: the mid-length's, the same section by every photo of the two
The carbine-length's own photo; the mid-length's, the same section, agrees within the two ±.
The lower half's width (it stands inside the upper one's sides at the seam)1.745 in ± 0.03 in 44.3 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the lower one from below, 1280 x 853
Photo 1.745 in ± 0.03 in used
BCM's gallery photo STKL8997: the two halves apart, the lower one from below, 1280 x 853, harvested
Scale: the lower half's own row of three M-LOK slots, 269 px apart for the standard's 40 mm: 170.8 px/in. Read by the lower half's silhouette across it at column 600 (rows 76 to 374): 298 px; ± 4 px
Height, excluding the front hook2.176 in ± 0.02 in 55.3 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 2.176 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the outline's top (row 242, the spine) to the body's bottom (row 611) at column 700, clear of the hook: 369 px; ± 3 px
BCM gives no height.
Its top (the spine's tab at its rear end, the outline's highest point) above the bore axis1.294 in ± 0.02 in 32.9 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 1.294 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the bore axis at row 458.5, the middle of its rear flanges (rows 321 and 596 at column 46), which stand in the delta ring round the barrel nut; the outline's highest point, the spine's tab over the ring (row 239): 219.5 px; ± 3 px. The spine along its length stands at row 242, 0.02 lower
Its body's bottom (clear of the hook) below the bore axis0.899 in ± 0.02 in 22.8 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.899 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the axis (row 458.5) to the body's bottom (row 611) at columns 300 to 700: 152.5 px; ± 3 px
Inside diameterNo value yetMissingNo source yet
BCM gives none, and no photo looks into an end. The model's inside is its outside less the wall (wall), which no view gives either.
Its rear end (bearing on the delta ring's lip) ahead of the receiver's front face0.336 in ± 0.015 in 8.5 mmProvisionalWorked out: {std.ar15.slip_ring_front_x}
Worked out 0.336 in ± 0.015 in used
{std.ar15.slip_ring_front_x}, harvested
Where the standard's delta ring holds it (std.ar15.slip_ring_front_x, from the Army's drawings): its rear flanges in the ring, against the lip. BCM's instructions (this page's picture of them, e0a7762984ab): "pull the Delta Ring to the furthest rearward position, enough to allow the rear of the PMCR to interface with the Barrel Nut teeth. The upper handguard will surround and index to the barrel nut enough to let the Delta Ring travel forward to secure the upper handguard in place".
Its body's rear face (behind which its rear flanges and the spine's tab stand), from its rear end0.2 in ± 0.01 in 5.1 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.2 in ± 0.01 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the body's whole height begins at column 56 (rows 239 to 601) against the rear end (22): 34 px; ± 2 px
Its rear flanges (what stands in the delta ring round the barrel nut), outside diameter1.621 in ± 0.03 in 41.2 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 1.621 in ± 0.03 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the upper flange's top (row 321) to the lower flange's bottom (row 596) at column 46, where both are whole: 275 px; ± 4 px for their rounded rear edges
Inside the delta ring's bore (std.ar15.slip_ring_bore_d, 1.75), and about the barrel nut's toothed flange (std.ar15.barrel_nut_flange_od, 1.56) and a wall: BCM's instructions have the rear of the PMCR "interface with the Barrel Nut teeth", so its flanges stand round the teeth and in their notches, which the nut's model has as a ring; what the two share there is said in the part.
The gap between its two halves' rear flanges at each side (where the backdrop shows through)0.436 in ± 0.02 in 11.1 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.436 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the backdrop through the rear end at column 46: rows 437 to 511, 74 px; ± 3 px
That gap's middle above the bore axis (negative below)-0.091 in ± 0.02 in -2.3 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo -0.091 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the gap's middle (row 474) less the axis (row 458.5): 15.5 px under it; ± 3 px
The seam between its two halves, on the sides, above the bore axis (negative below)-0.339 in ± 0.03 in -8.6 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo -0.339 in ± 0.03 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the dark band where the upper half's side ends over the lower half (rows 504 to 528 at columns 300 to 700), its middle 516: 57.5 px under the axis; ± 5 px
The upper half reaches below the axis; the lower one, narrower (lower_width), stands inside its sides along the seam.
Where the upper half's upright side meets its M-LOK face, above the bore axis0.5 in ± 0.02 in 12.7 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.5 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the change from the face's lit band to the side's textured one: row 372 at columns 500 and 700, 376 at 300: 85 px over the axis; ± 3 px
M-LOK slots in each upper face (the 10:30 and 1:30 rows)3ConfirmedPublished: BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, the maker, read Oct 28, 2026
Published “Three, three-hole M-LOK® compatible mounting slots, mounting surfaces (10:30, 1:30, and 6:00 o'clock placements)” used
BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 3 count
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: none: a count. Read by three see-through slots in the right upper row; three in the left's on e380434eed29, and in both upper rows and the lower row on 291dadf219c1
BCM's "three-hole" for each of the three, counted on its photos.
The upper rows' rearmost M-LOK slot (its centre), from its rear end2.343 in ± 0.01 in 59.5 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 2.343 in ± 0.01 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the rearmost slot's centre (column 419.3, the see-through region's middle) from the rear end (22): 397.3 px; ± 2 px. The next two at 684.8 and 953.6: the standard's pitch to 0.6%
The upper rows' slot centres above the bore axis0.806 in ± 0.02 in 20.5 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.806 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the slot's near rim, rows 306 to 338 at columns 500 and 700 (its upper wall's shadow over the see-through part): centre 322, 136.5 px over the axis; ± 3 px
The upper rows' see-through slits, seen from above, out from the middle (to each side)0.539 in ± 0.02 in 13.7 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 0.539 in ± 0.02 in used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by the two rows' see-through slits, centres at rows 531.8 and 722.6: 95.4 px each side of their middle; ± 2 px
Not the slots' centres: from above, the upper half's own side under each face hides the outer part of what shows through a slot, so the slit stands inward of the slot. Not used by the model (mlok_side_face_distance is the face's place); kept as the reading it is.
The upper M-LOK faces' outward direction about the bore axis, from straight up (degrees)43° ± 4°CorroboratedPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Published “Three, three-hole M-LOK® compatible mounting slots, mounting surfaces (10:30, 1:30, and 6:00 o'clock placements)”
BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 43 deg ± 4 deg used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by two readings: the face runs from where the upright side ends (side_top_y, 0.50 up, at the half width, width / 2) to where it meets the spine (spine_vent_y, 1.10 up, at the spine's half width, spine_half_width): 0.60 up over 0.633 in, its outward direction 43.5° from up; and the slot's near rim, 32 px tall in the level side view (rows 306 to 338), is the standard's 7 mm (std.mlok.slot_width) times the sine of 43°
BCM's "10:30, 1:30" says which faces; the photo's own edges put them at 43 degrees from up, within its ± of BCM's 45. The accessories stand out at the angle the faces have.
The upper M-LOK faces' distance from the bore axis (along their outward direction)0.998 in ± 0.04 in 25.3 mmProvisionalWorked out: {.width} / 2 * sin({.mlok_side_face_angle}) + {.side_top_y} * cos({.mlok_side_face_angle})
Worked out 0.998 in ± 0.04 in used
{.width} / 2 * sin({.mlok_side_face_angle}) + {.side_top_y} * cos({.mlok_side_face_angle}), harvested
The plane through the face's lower edge (the upright side's top at the half width) at the faces' angle: it meets the spine at spine_vent_y, and the slots' centres, which the level photo has 0.806 up, stand 0.08 up the face from where its normal through the axis meets it (where an accessory is placed).
M-LOK slots in the underside (six o'clock)3ConfirmedPublished: BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, the maker, read Oct 28, 2026
Published “Three, three-hole M-LOK® compatible mounting slots, mounting surfaces (10:30, 1:30, and 6:00 o'clock placements)” used
BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 3 count
BCM's gallery photo STKL8997: the two halves apart, the lower one from below, 1280 x 853, harvested
Scale: none: a count. Read by three slots along the lower half's middle, the heat shield bright through them
BCM's figure, counted on its photo.
The underside's rearmost M-LOK slot (its centre), from its rear end1.77 in ± 0.06 in 45 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the lower one from below, 1280 x 853
Photo 1.77 in ± 0.06 in used
BCM's gallery photo STKL8997: the two halves apart, the lower one from below, 1280 x 853, harvested
Scale: the lower half's own row of three M-LOK slots, 269 px apart for the standard's 40 mm: 170.8 px/in. Read by the slots' see-through middles along row 215 at columns 593 and 862 (the rearmost is broken by the shield behind it, its middle near 323: one pitch behind the second, 324) less the lower half's rear end (column 20): 304 px; ± 0.06 in for the lower half's rear end against the upper's
The underside's M-LOK face, its distance below the bore axis0.899 in ± 0.02 in 22.8 mmProvisionalWorked out: {.bottom_below_axis}
Worked out 0.899 in ± 0.02 in used
{.bottom_below_axis}, harvested
The room inside its M-LOK faces before what runs through it (how far an accessory's nuts may reach in)No value yetMissingNo source yet
Depends on the barrel, the gas tube and the heat shield, and on the wall, which no view gives: no figure, so the check reads as unmade.
Its underside's flat (where the six o'clock slots are), half its width0.3 in ± 0.08 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: the lower half from below (291dadf219c1) shows its slot row between its two rows of vents on faces turned down and out; the flat is taken as the slot's 7 mm and a margin each side as wide as the webs between the vents and the slots.
Worked out 0.3 in ± 0.08 in used
An assumption for the drawing, not a reading: the lower half from below (291dadf219c1) shows its slot row between its two rows of vents on faces turned down and out; the flat is taken as the slot's 7 mm and a margin each side as wide as the webs between the vents and the slots., harvested
The vents along each lower side (through to the heat shield)5ProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 5 count used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: none: a count. Read by five dark runs along row 598; five in each row either side of the six o'clock slots on 291dadf219c1, the shield bright through them
The rearmost lower vent's middle, from its rear end1.4 in ± 0.01 in 35.6 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 1.4 in ± 0.01 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by dark runs along row 598 (luminance under 45), centres 259.5, 434, 607, 780, 953: the rearmost 237.5 px ahead of the rear end; ± 2 px
The lower vents, middle to middle1.022 in ± 0.006 in 26 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 1.022 in ± 0.006 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the first to the last, 693.5 px over four gaps: 173.4 px each
Each lower vent's length along it0.607 in ± 0.01 in 15.4 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.607 in ± 0.01 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the dark runs along row 598: 103 to 104 px
The lower vents' middles above the bore axis (negative below)-0.811 in ± 0.03 in -20.6 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo -0.811 in ± 0.03 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the dark run at column 300, rows 586 to 606: middle 596, 137.5 px under the axis; ± 5 px
The lower vents' middles out from the middle (to each side)0.451 in ± 0.03 in 11.5 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the lower one from below, 1280 x 853
Photo 0.451 in ± 0.03 in used
BCM's gallery photo STKL8997: the two halves apart, the lower one from below, 1280 x 853, harvested
Scale: the lower half's own row of three M-LOK slots, 269 px apart for the standard's 40 mm: 170.8 px/in. Read by the two rows of vents at column 452, middles at rows 128 and 282: 77 px each side of their middle; ± 4 px
Each lower vent's width across it0.14 in ± 0.02 in 3.6 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the lower one from below, 1280 x 853
Photo 0.14 in ± 0.02 in used
BCM's gallery photo STKL8997: the two halves apart, the lower one from below, 1280 x 853, harvested
Scale: the lower half's own row of three M-LOK slots, 269 px apart for the standard's 40 mm: 170.8 px/in. Read by the lit side's vent across column 452 (rows 116 to 140): 24 px; ± 3 px, on a face turned partly away from the lens
The spine along its top (the outer edges of its two rows of pockets), half its width0.294 in ± 0.02 in 7.5 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 0.294 in ± 0.02 in used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by the two rows of pockets along the top, their outer edges at rows 576 and 680 (on a crop at twice the size): 52 px each side of their middle (628); ± 3 px
The bottom of the spine (where the M-LOK faces meet it, the windows' sills), above the bore axis1.1 in ± 0.02 in 27.9 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 1.1 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the windows' lower edge and the face's lit band's top at columns 500 and 700 (rows 271 to 274): 186 px over the axis; ± 3 px
The ribs across the spine (between its pockets, and at its ends)14ProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 14 count used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by fourteen dark lines across the two rows of pockets along row 590 (columns 48 to 1196), the shadows of the ribs between them: thirteen pockets a row
The rearmost rib across the spine (its rear wall's shadow line), from its rear end0.147 in ± 0.02 in 3.7 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 0.147 in ± 0.02 in used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by the first dark line along row 590 (column 48) less the rear end (22): 26 px; ± 3 px
The ribs across the spine, middle to middle0.499 in ± 0.005 in 12.7 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 0.499 in ± 0.005 in used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by the first to the last line, columns 48 to 1196: 1148 px over thirteen gaps, 88.3 px each
Half the spine's windows' pitch on the side view (spine_vent_pitch, 1.016): the two photos agree within 2%.
The rib along the spine's middle, between its two rows of pockets: its width0.254 in ± 0.02 in 6.5 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 0.254 in ± 0.02 in used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by between the pockets' inner edges, rows 605 and 650 (on a crop at twice the size): 45 px; ± 3 px
The ribs across the spine between its pockets (along it), their width0.15 in ± 0.03 in 3.8 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 0.15 in ± 0.03 in used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by the lit ribs between the pockets along row 590, each between a dark line at its front and one at its rear 24 to 28 px apart; ± 4 px
The pockets lie between the ribs, centred between the lines spine_groove0_x and spine_groove_pitch place: as long as the pitch less a rib.
The rim along the spine's outer top edge, over its pockets0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the level side view's top edge runs straight over the pockets (no notch where each is), so a rim stands along the top over them; from above it is a lit edge outside each pocket, 8 px on this photo (0.045 in) and 2 px on the mid-length's (0.015).
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: the level side view's top edge runs straight over the pockets (no notch where each is), so a rim stands along the top over them; from above it is a lit edge outside each pocket, 8 px on this photo (0.045 in) and 2 px on the mid-length's (0.015)., harvested
The slit through the floor of every other pocket (by the middle rib), its width0.028 in ± 0.01 in 0.7 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 0.028 in ± 0.01 in used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by the backdrop seen through under alternate pockets' inner edges, rows 598 to 603 and 655 to 658: 4 to 5 px; ± 1 px
The windows in each side of the spine, into every other pocket6ProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 6 count used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: none: a count. Read by six dark windows along row 260, the rearmost half seen; the see-through slits under alternate pockets from above (291dadf219c1) agree, six a row
The rearmost spine window's middle, from its rear end0.874 in ± 0.02 in 22.2 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.874 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the windows along row 260 (luminance under 45), centres 342.5, 516.5, 688.5, 860, 1032, and the rearmost half seen at 159 to 202: the second's (1.890) less a pitch. From above, the slit under the first at 0.869
The spine's windows, middle to middle1.016 in ± 0.006 in 25.8 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 1.016 in ± 0.006 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the second to the last, 689.5 px over four gaps: 172.4 px each
Each spine window's length along it0.395 in ± 0.01 in 10 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.395 in ± 0.01 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the dark windows along row 260: 66 to 68 px
Each spine window's height (from the spine's bottom up)0.1 in ± 0.01 in 2.5 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.1 in ± 0.01 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the dark window at column 500, rows 254 to 271: 17 px
The opening across the top of its front end (round the front sight base's tower): its back, from its rear end6.795 in ± 0.03 in 172.6 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 6.795 in ± 0.03 in used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by along the spine's middle (row 627) the polymer ends at column 1224, the rear end at column 22: 1202 px; ± 3 px. The backdrop shows from there to the faces' front tip seen from above (column 1263, 7.015 in from the rear end), which stands behind the side view's front face (length) by the front's chamfer
That opening's half width, at its back0.475 in ± 0.05 in 12.1 mmProvisionalPhoto: BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853
Photo 0.475 in ± 0.05 in used
BCM's gallery photo STKL8997: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of three M-LOK slots, centres 278.6 px apart for the standard's 40 mm: 176.9 px/in. Read by across column 1229 (0.19 in from the front), the backdrop from row 542 to row 710: 84 px each side of the middle; it widens to 0.68 at column 1245; ± 6 px
The textured panels' top edge, above the bore axis0.49 in ± 0.02 in 12.4 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.49 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the panels' upper edge along the side (rows 372 to 376), just under the face's lower edge: 84 px over the axis; ± 3 px
The textured panels' bottom edge, above the bore axis (negative below)-0.215 in ± 0.03 in -5.5 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo -0.215 in ± 0.03 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the panels' lower edge (row 495, by eye along columns 350 to 1100): 36.5 px under the axis; ± 5 px
The rearmost panel's rear end, from its rear end0.31 in ± 0.05 in 7.9 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.31 in ± 0.05 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the panel's rear end (column 75) less the rear end (22): 53 px; ± 6 px, by eye
The ribs between the textured panels: how many3ProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 3 count used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: none: a count. Read by four panels along each side (the front one under the star), with a rib between each two; the same on the left side (e380434eed29)
The first rib's top (where it meets the panels' top edge), from its rear end3.08 in ± 0.05 in 78.2 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 3.08 in ± 0.05 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by column 545 less the rear end (22); ± 6 px, by eye
The second rib's top, from its rear end4.79 in ± 0.05 in 121.7 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 4.79 in ± 0.05 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by column 835 less the rear end (22); ± 6 px, by eye
The third rib's top (the star panel's rear edge), from its rear end6.53 in ± 0.05 in 165.9 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 6.53 in ± 0.05 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by column 1130 less the rear end (22); ± 6 px, by eye
The first rib's foot (where it meets the panels' bottom edge), from its rear end1.92 in ± 0.05 in 48.8 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 1.92 in ± 0.05 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by column 348 less the rear end (22); ± 6 px, by eye
The second rib's foot, from its rear end4.16 in ± 0.05 in 105.7 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 4.16 in ± 0.05 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by column 728 less the rear end (22); ± 6 px, by eye
The third rib's foot, from its rear end6.39 in ± 0.05 in 162.3 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 6.39 in ± 0.05 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by column 1105 less the rear end (22); ± 6 px, by eye
The ribs between the panels, their width0.11 in ± 0.03 in 2.8 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.11 in ± 0.03 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the smooth ribs between the stippled panels, about 18 px across; ± 4 px, by eye
How far the textured panels stand in from the side round them0.015 in ± 0.01 in 0.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: BCM's "Aggressive textured area" is a stipple whose edge catches the light round each panel in the photos; no view shows it in section. Drawn as a shallow recess, the stipple itself not drawn.
Worked out 0.015 in ± 0.01 in used
An assumption for the drawing, not a reading: BCM's "Aggressive textured area" is a stipple whose edge catches the light round each panel in the photos; no view shows it in section. Drawn as a shallow recess, the stipple itself not drawn., harvested
The ribbed tab on the lower half's rear (over the upper half's side): its rear end, from its rear end0.153 in ± 0.02 in 3.9 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.153 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the tab's rear end at column 48 (the flange's run reaching down to row 461 there, to 437 at column 46) less the rear end (22); ± 3 px
Where the ribbed tab's level top begins to fall toward its front, from its rear end0.755 in ± 0.04 in 19.2 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 0.755 in ± 0.04 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by its top edge level at row 465 back from column 150, falling ahead of it to the seam at column 215: 128 px ahead of the rear end; ± 7 px, by eye
The ribbed tab's front end (at the seam), from its rear end1.138 in ± 0.04 in 28.9 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo 1.138 in ± 0.04 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by the tab's lower front corner at column 215: 193 px ahead of the rear end; ± 7 px, by eye
The ribbed tab's top (its rear part, level), above the bore axis-0.027 in ± 0.02 in -0.7 mmProvisionalPhoto: BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853
Photo -0.027 in ± 0.02 in used
BCM's main photo STKL8995 of the black PMCR carbine-length, assembled, its right side seen level, 1280 x 853, harvested
Scale: its three upper M-LOK slots, centres 267.15 px apart (265.5 and 268.8) for the standard's 40 mm (std.mlok.slot_pitch): 169.6 px/in. Read by its top edge at rows 461 to 465 from column 48 to 150: 4.5 px under the axis; ± 3 px
How far the ribbed tab stands out from the upper half's side0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: the tab shows its lit top edge over the upper half's side in the level side views; how far it stands out isn't seen from above or an end.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: the tab shows its lit top edge over the upper half's side in the level side views; how far it stands out isn't seen from above or an end., harvested
Its length between the ring and the cap (from its rear end to its front flange's end)6.5 in ± 0.1 in 165.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: BCM states none and no photo shows the front flange, inside its front end. Taken as from its rear end on the delta ring's lip (rear_x) to the round cap's floor on BCM's 11.5 in carbine barrel (bcm-115-carbine-barrel) with BCM's F base: the cap's face on the base at 13.904 in the rifle, its floor the sheet's 0.032 behind it (bcm-handguard-cap-round-750), less the ring's lip at 7.372 (std.ar15.upper_front_face_x + std.ar15.slip_ring_front_x).
Worked out 6.5 in ± 0.1 in used
An assumption for the drawing, not a reading: BCM states none and no photo shows the front flange, inside its front end. Taken as from its rear end on the delta ring's lip (rear_x) to the round cap's floor on BCM's 11.5 in carbine barrel (bcm-115-carbine-barrel) with BCM's F base: the cap's face on the base at 13.904 in the rifle, its floor the sheet's 0.032 behind it (bcm-handguard-cap-round-750), less the ring's lip at 7.372 (std.ar15.upper_front_face_x + std.ar15.slip_ring_front_x)., harvested
Its front flange (what goes into the round cap), outside diameter1.36 in ± 0.05 in 34.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the flange goes into the cap (BCM: "The PMCR - Carbine will only fit the "round" front handguard retaining cap") and shows on no photo. Drawn round, inside the round cap's two tabs, which stand 0.690 from the axis inside (bcm-handguard-cap-round-750: tab_set_r less the sheet).
Worked out 1.36 in ± 0.05 in used
An assumption for the drawing, not a reading: the flange goes into the cap (BCM: "The PMCR - Carbine will only fit the "round" front handguard retaining cap") and shows on no photo. Drawn round, inside the round cap's two tabs, which stand 0.690 from the axis inside (bcm-handguard-cap-round-750: tab_set_r less the sheet)., harvested
Its front flange's length (into the cap)0.4 in ± 0.1 in 10.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view shows the flange. Long enough that the front wall it stands from stays behind the round cap's rim with the flange home in it (0.244 deep).
Worked out 0.4 in ± 0.1 in used
An assumption for the drawing, not a reading: no view shows the flange. Long enough that the front wall it stands from stays behind the round cap's rim with the flange home in it (0.244 deep)., harvested
How far its inside stands off the front sight base where the base stands in its front end0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no photo looks into its front end, and the real part goes on round a front sight base (BCM's instructions draw it so). The inside under the hood is cut clear of BCM's F base model (bcm-front-sight-base-f-750) as it stands with the hand guard seated in the round cap, this far off each of the base's faces.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: no photo looks into its front end, and the real part goes on round a front sight base (BCM's instructions draw it so). The inside under the hood is cut clear of BCM's F base model (bcm-front-sight-base-f-750) as it stands with the hand guard seated in the round cap, this far off each of the base's faces., harvested
Its polymer wall's thickness0.1 in ± 0.04 in 2.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view shows an end square on or a section. Taken so that the model comes near BCM's 4.48 oz at the polymer's density on file (std.density.polymer, an unfilled nylon) with its aluminium heat shield.
Worked out 0.1 in ± 0.04 in used
An assumption for the drawing, not a reading: no view shows an end square on or a section. Taken so that the model comes near BCM's 4.48 oz at the polymer's density on file (std.density.polymer, an unfilled nylon) with its aluminium heat shield., harvested
Its aluminium heat shield's thickness0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: the shield shows only through the lower half's slots and vents, never in section.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: the shield shows only through the lower half's slots and vents, never in section., harvested
Its front wall (the inner face the front flange stands from), from its rear end6 in ± 0.15 in 152.4 mmProvisionalWorked out: {.mounting_length} - {.front_flange_length} - {.wall}
Worked out 6 in ± 0.15 in used
{.mounting_length} - {.front_flange_length} - {.wall}, harvested
Ahead of the wall the shell runs on open to its front face, over the cap and the front sight base's rear.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Drop-in handguard's front in its cap
Handguard mount
Drop-in handguard's hold
- Delta rings
- BCM Delta Ring Assembly - AR15
Gas system length
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $30.95 Black Nov 21, 2026, in stock that day