Handguard cap
BCM Handguard Cap Round - .750 AR15
BCM: "Handguard Cap for your AR15, M16, M4. Round caps are typically used on barrels with a standard carbine length gas system. For .750 Diameter Barrel". The cap behind the front sight base that holds the front of a drop-in handguard: the round one, the M4's.

- Weight
- 0.4 oz ± 0.02 oz Provisionalworked out: (0.785398163 * (({.skirt_od} - 2 * {.bend_r}) * ({.skirt_od} - 2 * {.bend_r}) - {.bore_d} * {.bore_d}) - {.slot_w} * ({.slot_hi} - {.slot_lo} - {.slot_w}) - 0.785398163 * {.slot_w} * {.slot_w} + 9.8696044 * ({.bend_r} - {.sheet} / 2) * ({.skirt_od} / 2 - {.bend_r}) + 6.28318531 * ({.bend_r} - {.sheet} / 2) * ({.bend_r} - {.sheet} / 2) + 3.14159265 * ({.skirt_od} - {.sheet}) * ({.length} - {.bend_r})) * {.sheet} * {std.density.steel}
- Lowest price
- $3.00 at BCM, read Nov 21, 2026
- Maker's number
- Handguard-Cap-Round-.750-AR15
- Colour
- BCM handguard cap (round), manganese phosphate
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Drop-in 16 in, Stealth Gray on BCM's MK2 lower”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Bore (the journal it fits: .750 or .625)0.75 in ± 0.0005 in 19 mmConfirmedPublished: BCM, Handguard Cap Round - .750 AR15, the maker, read Oct 28, 2026
Published “For .750 Diameter Barrel” used
BCM, Handguard Cap Round - .750 AR15, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
The bore's diameter0.751 in ± 0.00004 in 19.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 19.0754 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by its STEP surfaces read as text: the bore a cylinder of r 9.5377 mm about the axis
0.751 in: a thousandth over BCM's .750 journal.
The skirt's lip, outside (its widest)1.693 in ± 0.00004 in 43 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 43 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by the lip's outside, a cylinder of r 21.5 mm from the open edge forward 1.043 mm
Photo 1.69 in ± 0.025 in
BCM's photo of the cap, its face from a little below, 500 x 491, harvested
Scale: the bore: BCM's "For .750 Diameter Barrel" (bore_d, 0.751). Read by dark runs along rows (luminance < 150): the rim 387 px across at its widest row, the bore 172 px across at its; across, where the view's tilt doesn't shorten either
387/172 × 0.751 = 1.690. The ± is two pixels at each edge. It checks the reference model's proportion on BCM's own cap: 0.444 here, 0.4436 there.
The reference model's figure, a mil-spec round cap; BCM's photo puts its own cap's rim within 0.003 in of it, scaled by the bore.
The skirt's last millimetre at its open edge stands 0.15 mm proud of the rest, an S-bend between: a lip the handguard's front goes in past.
The skirt, outside (behind the lip)1.681 in ± 0.00004 in 42.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 42.7 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by a cylinder of r 21.35 mm, from the lip's S-bend to the bend into the face (and the bend's outside, a torus of tube r 3.0 mm about a circle of r 18.35 mm, ends on it)
The sheet's thickness0.032 in ± 0.00004 in 0.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 0.8128 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by the face's two planes 0.8128 mm apart (z −7.0 and −6.1872), and the skirt's two cylinders (r 21.35 and 20.5372; r 21.5 and 20.6872 at the lip)
0.032 in.
Depth along the bore0.276 in ± 0.00004 in 7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 7 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by the face's front plane at z −7.0 and the skirt's edge (a plane ring) at z 0
0.276 in.
From the face's front (against the front sight base) to the skirt's open edge.
The lip's length from the open edge0.041 in ± 0.00004 in 1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 1.0428 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by the lip's cylinder r 21.5 from z 0 to −1.0428, where its S-bend (two tori of tube r 0.762 and 1.016) begins
The lip's S-bend along the bore0.028 in ± 0.00004 in 0.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 0.7148 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by the S-bend's two tori between z −1.0428 and −1.7576
The bend from the face to the skirt (outside)0.118 in ± 0.00004 in 3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 3 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by a torus of tube r 3.0 (outside) and 2.1872 (inside) about a circle of r 18.35 mm at z −4.0
The gas tube's hole: its width0.185 in ± 0.00004 in 4.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 4.7 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by its two flat sides, planes 2.35 mm either side of the line over the bore
The gas tube's hole: its lower end above the bore axis0.529 in ± 0.00004 in 13.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 13.425 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by its lower end, a half cylinder r 2.35 about a centre 15.775 mm over the axis
The gas tube's hole: its upper end above the bore axis0.753 in ± 0.00004 in 19.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 19.125 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by its upper end, a half cylinder r 2.35 about a centre 16.775 mm over the axis
The hole runs up into the bend: the face is flat to 18.35 mm from the axis.
The two tabs at the sides: their width0.177 in ± 0.00004 in 4.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 4.5 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by the tab's two flat sides, planes 2.25 mm either side of the line across the bore
At 3 and 9 o'clock (square across from the gas tube's hole), the bend is pressed in: a strip of it set in toward the bore, as BCM's photo shows two square notches at the sides of its cap's rim.
The tabs: their outside face from the bore axis0.722 in ± 0.00004 in 18.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 18.35 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by the tab's outside, a plane 18.35 mm from the axis from the face's front (z −7.0) back to z −5.75
The tabs: their bend (outside)0.079 in ± 0.00004 in 2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 2 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by a cylinder of r 2.0 (outside) and 2.8128 (inside) across the tab, its axis 20.35 mm from the bore axis at z −5.75
The tabs: their bend's centre behind the face's front0.049 in ± 0.00004 in 1.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 1.25 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by the tab bend's axis at z −5.75, the face's front at z −7.0
The tabs: their step out to the skirt, behind the face's front0.128 in ± 0.00004 in 3.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one
Model 3.25 mm ± 0.001 mm used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the mil-spec parts; its end cap is a round one, from the site owner
Read by the tab's outside step, a plane at z −3.75 from the bend (20.35 mm from the axis) out to the skirt's flat (21.30); its inside step at z −2.937
Width across1.693 in ± 0.00004 in 43 mmCorroboratedWorked out: {.lip_od}
Worked out 43 mm ± 0.001 mm used
{.lip_od}, harvested
The lip's, its widest.
Height1.693 in ± 0.00004 in 43 mmCorroboratedWorked out: {.lip_od}
Worked out 43 mm ± 0.001 mm used
{.lip_od}, harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Drop-in handguard's front in its cap
- Handguards
- BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length)
Handguard cap seat
Drop-in handguard's hold
- Handguards
- BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $3.00 Nov 21, 2026, in stock that day