Handguard
Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine)
Midwest Industries' two-piece aluminium drop-in handguard, carbine length (MI-17M; one page, SKU AR15M16TWOPI, for the carbine, mid and rifle lengths). The maker: "Drop-in, no gunsmith installation, installs in minutes like factory handguards!", "Five anti rotation QD socket locations for QD sling swivels", "Monolithic type continuous top rail", "MIL-STD 1913 top rail", "Constructed from 6061 aluminum hard coat anodized", "1.83\" wide and 2.25\" tall", and "MI-17M (Carbine) – Only for use with round handguard caps". It goes on the rifle's own barrel nut and delta ring and the cap behind its front sight base: no free-float nut of its own. M-LOK® is a trademark of Magpul Industries Corp.

- Weight
- 5 oz ± 0.05 oz Confirmedpublished: Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Carbine, MI-17M), Product Details, the maker, read Oct 28, 2026
- Lowest price
- $136.95 at AR15Discounts, read Nov 21, 2026 (Black)
- Maker's number
- MI-17M
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- midwestindustriesinc.com
In “BCM 11.5 in carbine, suppressed”, a build on the start page, in place of its BCM MCMR-10 (M-LOK® Compatible* Modular Rail). The BCM G.I. Barrel Nut - AR15 and the BCM Delta Ring Assembly - AR15 and the BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers and the BCM Handguard Cap Round - .750 AR15 go in with it: its maker says it needs them.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length (the maker's overall length; read here as the rail's whole length, its tongue's rear end to its front)7 in 177.8 mmConfirmedPublished: Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Carbine, MI-17M), Product Details, the maker, read Oct 28, 2026
Published “Overall Length [...] MI-17M - 7"” used
Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Carbine, MI-17M), Product Details, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 7.09 in ± 0.06 in
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the tongue's rear end (1.06 behind slot 0: tongue_rear_from_slot0) to the rail's and the upper half's front (6.03 ahead: front_from_slot0)
The maker's figure, which its photo through its camera reads 0.09 more of, inside the figure's half digit.
Its mounting length: from its rear flanges' end (on the delta ring's lip) to the end of what goes into the cap (at the inside of the cap's face)6.5 in ± 0.02 in 165.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the room the catalog's carbine-length rifle holds it in: from the delta ring's lip (std.ar15.slip_ring_front_x, 0.336 ahead of the receiver's face) to the round cap's pocket, the inside of its face (bcm-handguard-cap-round-750, its sheet behind its seat), with the cap on BCM's F base on bcm-115-carbine-barrel (the base's rear face 6.868 ahead of the receiver's face): 6.500.
Worked out 6.5 in ± 0.02 in used
An assumption for the drawing, not a reading: the room the catalog's carbine-length rifle holds it in: from the delta ring's lip (std.ar15.slip_ring_front_x, 0.336 ahead of the receiver's face) to the round cap's pocket, the inside of its face (bcm-handguard-cap-round-750, its sheet behind its seat), with the cap on BCM's F base on bcm-115-carbine-barrel (the base's rear face 6.868 ahead of the receiver's face): 6.500., harvested
A part held between two faces is as long as the room it is held in (CLAUDE.md, the P90 magazine): the cap seats it there (D97, ar15.handguard_front). Not seen in the photo: what of its front goes into the cap is inside its front end. The maker's 7 in is another span, the rail's whole length (length: 7.09 by the photo).
The front sight base's rear face (the cap's seat), in its frame, with the cap seating it: its mounting length and the cap's face ahead of its rear end6.868 in ± 0.03 in 174.4 mmProvisionalWorked out: {.rear_x} + {.mounting_length} + {bcm-handguard-cap-round-750.sheet}
Worked out 6.868 in ± 0.03 in used
{.rear_x} + {.mounting_length} + {bcm-handguard-cap-round-750.sheet}, harvested
What of its hidden front stands in the base's space ahead of this face is cut from its inside (pipeline/blender/midwest_industries_drop_in_mlok_mid.py): the base is sourced, its inside isn't.
Its whole length, from its rear flanges' end (in the delta ring) to the lower half's front edge6.84 in ± 0.07 in 173.7 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 6.84 in ± 0.07 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the rear flanges' rim at 0.70 behind the rail's slot 0 (rail_slot0_from_rear) to the lower half's front edge at 6.14 (lower_front_from_slot0)
Width (across the lower half's side faces)1.83 in ± 0.005 in 46.5 mmConfirmedPublished: Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Carbine, MI-17M), Product Details, the maker, read Oct 28, 2026
Published “1.83" wide and 2.25" tall” used
Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Carbine, MI-17M), Product Details, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
One figure for the three lengths. Taken as across the lower half's flat side faces, the widest in the photo (the camera's plane for the M-LOK slots).
Height (the rail's top to the bottom)2.25 in ± 0.005 in 57.1 mmConfirmedPublished: Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Carbine, MI-17M), Product Details, the maker, read Oct 28, 2026
Published “1.83" wide and 2.25" tall” used
Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Carbine, MI-17M), Product Details, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 2.28 in ± 0.03 in
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the bottom's silhouette at column 745 (row 427) carried back onto z = 0.415: 2.283 below the rail's top
The maker's figure; the camera, fitted to no height but the M-LOK slots' 7 mm, reads 0.03 more.
Inside diameterNo value yetMissingNo source yet
Not published, and no view on file looks into either end square on. Left missing: the model's inside is its wall (assumed) inside its section.
Its rear end (the rear flanges' end, bearing on the delta ring's lip) ahead of the receiver's front face0.336 in ± 0.015 in 8.5 mmProvisionalWorked out: {std.ar15.slip_ring_front_x}
Worked out 0.336 in ± 0.015 in used
{std.ar15.slip_ring_front_x}, harvested
Where the standard's delta ring holds it: its rear flanges in the ring's skirt, against the lip (std.ar15.slip_ring_front_x). Its instructions: "Pull the delta ring to the rear and remove both sections of the plastic handguards, pulling out from the delta ring end first."
Its rail's top above the bore axis1.212 in ± 0.02 in 30.8 mmCorroboratedWorked out: {bcm-m4-upper.rail_top_above_pin} - {bcm-m4-upper.bore_axis_above_pin}
Worked out 1.2125 in ± 0.02 in used
{bcm-m4-upper.rail_top_above_pin} - {bcm-m4-upper.bore_axis_above_pin}, harvested
Level with a mil-spec receiver's rail: the maker's "Monolithic type continuous top rail". So the catalog's BCM M4 upper's rail top above its pin line less its bore's height above it.
Slots in its top rail15ProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 15 count used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: none: a count. Read by the top silhouette's dips under the lands' envelope (dips.py): 15, centres from px 184.8 to 1002.2, each 53.4 to 64.6 px from the next, falling smoothly with the distance (a projective map through them leaves 0.28 px rms), none missing; the first is the slot between the tongue's front (px 161) and the first land (px 194), at the pitch of the rest
Its rail's rearmost slot (its centre) ahead of its rear end (the rear flanges' end)0.7 in ± 0.06 in 17.8 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.7 in ± 0.06 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the flanges' rear rim: circles of their radius (collar_od) about the bore axis carried through the camera at 0.6 to 1.2 behind slot 0 over the photo (rim.py, rim_carbine.png): both flanges' outer edges lie between the ones at 0.6 and 0.8
Its rail's rearmost slot (its centre) ahead of the receiver's front face1.036 in ± 0.075 in 26.3 mmProvisionalWorked out: {.rear_x} + {.rail_slot0_from_rear}
Worked out 1.036 in ± 0.075 in used
{.rear_x} + {.rail_slot0_from_rear}, harvested
The rail's tongue (its plain rear part over the delta ring), its rear end behind the rail's slot 01.06 in ± 0.04 in 26.9 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 1.06 in ± 0.04 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the tongue's far rear corner (column 13.5, row 108.8) on the top flat's far edge: 1.051 behind slot 0 through the camera, 1.069 on the top's plane
With its rear flanges in the delta ring (rear_x, rail_slot0_from_rear) this puts the tongue's rear end 0.02 in behind the upper receiver's front face, inside the two readings' ± (0.04 and 0.06): it reaches the receiver, the maker's "continuous top rail". Drawn bearing on the receiver's front face.
The rail's tongue's thickness (a plate under the rail's top)0.12 in ± 0.03 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photo shows the plate's far rear edge 12 to 15 px tall from 23 in, edge-on from above where it isn't a height that can be read. Its underside stands 0.13 over the delta ring's front land (std.ar15.slip_ring_front_od) under a rail level with the receiver's.
Worked out 0.12 in ± 0.03 in used
An assumption for the drawing, not a reading: the photo shows the plate's far rear edge 12 to 15 px tall from 23 in, edge-on from above where it isn't a height that can be read. Its underside stands 0.13 over the delta ring's front land (std.ar15.slip_ring_front_od) under a rail level with the receiver's., harvested
The upper half's front (the rail's front end) ahead of the rail's slot 06.03 in ± 0.04 in 153.2 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 6.03 in ± 0.04 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the last land's front by the lands' projective map (fit1d.py), 6.015; the upper side face's front edge carried back onto its plane at the holes' height, 6.06
The upper half's body's rear face behind the rail's slot 00.336 in ± 0.04 in 8.5 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.336 in ± 0.04 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the upper side face's rear edge (column 205, row 250) carried back onto its plane (z 0.85)
The lower half's body's rear face behind the rail's slot 00.245 in ± 0.03 in 6.2 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.245 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the lower side face's rear edge carried back onto its plane at two heights: 0.239 and 0.252 behind slot 0
The lower half's front edge ahead of the rail's slot 06.14 in ± 0.03 in 156 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 6.14 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the lower side face's front edge (column 1184, row 250) carried back onto its plane: 6.138
Where the bottom flat ends at the front (its front part cut up), ahead of the rail's slot 05.95 in ± 0.05 in 151.1 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 5.95 in ± 0.05 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the bottom's step at columns 1086 to 1100 (rows 345 to 366) carried back onto the bottom's plane (y = -2.25): 5.86 to 5.96
How far the bottom's front part is cut up0.12 in ± 0.04 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the step shows about 20 px tall in the photo, edge-on from above, where it isn't a height that can be read.
Worked out 0.12 in ± 0.04 in used
An assumption for the drawing, not a reading: the step shows about 20 px tall in the photo, edge-on from above, where it isn't a height that can be read., harvested
The rail's neck's foot (where the upper half's top, a shelf out to its side faces, meets the neck under the head) below the rail's top0.41 in ± 0.04 in 10.4 mmConflictPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.41 in ± 0.04 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the dark line under the engraved face (column 745, rows 127 to 130) carried back onto a plane at z 0.343 (the neck's side is at 0.363, the head's lower faces carried on to shoulder_top_below_top: a thousandth of difference here): 0.407 to 0.419
Photo 0.268 in ± 0.03 in
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the same line carried back onto the upper side face's plane (z 0.85) instead
One line of the photo, read on two planes; which one it lies in the photo can't say. Read on the side face's plane (the first reading, a sloped shoulder from the neck out to the side faces under it), the body stood 0.18 to 0.19 in under the rail's top beside the head, and 17 of the 30 clamps on file stood in it (Aimpoint's T-2 LRP 0.06 cubic inches, its PRO and Duty RDS, EOTECH's STS, SIG's Romeo5, Holosun's ARO and HS510C, Magpul's MBUS 3: rail-clamps.test.ts); on the maker's \"MIL-STD 1913 top rail\" they go. Read on the neck's plane, the engraved face is the neck's side, as the maker engraves its name under the rail on its Combat Rail's neck (0.69 in wide down to 0.56 under its top: midwest-combat-rail-15-handguard), and a forged upper's neck runs as deep (0.39); the line read at column 760, row 140 as a hole's top rim (0.351 on the side face's plane) is the shelf's outer edge, 0.41 down. Drawn so: a neck down to here, the shelf out to the side faces.
neck and side differ by 0.142 in beyond what each states it is good to.
The neck's top: where the head's lower faces, carried on at 45 degrees, meet the neck's sides, below the rail's top0.18 in ± 0.04 in 4.6 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.18 in ± 0.04 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the top of the dark band under the lands (column 745, row 91: the head's lower faces and the neck's top in their shadow) carried back onto the neck's plane (z 0.343): 0.18. (First read as the top of a shoulder sloping out from the head, on a plane at z 0.6; with the engraved face taken for the neck's side, it is this.)
With the standard's head (lib.rail_half) this sets the neck's half width: the head's lower faces carried on to here.
Width across the upper half's side faces1.7 in ± 0.05 in 43.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photo shows the lower half's top as a ledge outside the upper half's side; how far isn't read from a view from above. Every reading on the upper side face is carried back onto this plane.
Worked out 1.7 in ± 0.05 in used
An assumption for the drawing, not a reading: the photo shows the lower half's top as a ledge outside the upper half's side; how far isn't read from a view from above. Every reading on the upper side face is carried back onto this plane., harvested
The gas tube's channel up inside the neck: its roof below the rail's top0.15 in ± 0.03 in 3.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view looks into either end. The neck stands over the gas tube (std.ar15.gas_tube_above_bore), so it is hollow up to a web under the rail's slots' floors (std.picatinny.slot_depth, 0.118), as thick as a few hundredths.
Worked out 0.15 in ± 0.03 in used
An assumption for the drawing, not a reading: no view looks into either end. The neck stands over the gas tube (std.ar15.gas_tube_above_bore), so it is hollow up to a web under the rail's slots' floors (std.picatinny.slot_depth, 0.118), as thick as a few hundredths., harvested
The upper side face's lower edge (the seam between the halves) below the rail's top0.979 in ± 0.03 in 24.9 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.979 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the dark seam line at column 745, row 244, carried back onto the upper side face's plane
The lower side face's top edge below the rail's top1.07 in ± 0.03 in 27.2 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 1.07 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by column 745, row 262, carried back onto the lower side face's plane
The lower side face's bottom edge (where the lower bevel begins) below the rail's top1.473 in ± 0.03 in 37.4 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 1.473 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by column 745, row 327, carried back onto the lower side face's plane
Half the bottom flat's width0.46 in ± 0.05 in 11.7 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.46 in ± 0.05 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the bottom's silhouette (column 745, row 427) carried back: z 0.506 where it meets the maker's height (y = -2.25), 2.283 below the top on z = 0.415
The seam's groove (each side), its width and depth0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the seam shows as a dark line a few pixels wide.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: the seam shows as a dark line a few pixels wide., harvested
Its wall's thickness0.08 in ± 0.03 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view looks into an end square on. Set so that the model's aluminium is near the maker's installed weight at the density on file (std.density.aluminium), as the mid-length's is.
Worked out 0.08 in ± 0.03 in used
An assumption for the drawing, not a reading: no view looks into an end square on. Set so that the model's aluminium is near the maker's installed weight at the density on file (std.density.aluminium), as the mid-length's is., harvested
The upper half's front top corner, rounded (its radius)0.25 in ± 0.1 in 6.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photo shows the upper half's front rounding over from its side into the rail's front, seen from behind.
Worked out 0.25 in ± 0.1 in used
An assumption for the drawing, not a reading: the photo shows the upper half's front rounding over from its side into the rail's front, seen from behind., harvested
The rear flanges' outside diameter1.74 in ± 0.01 in 44.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: inside the delta ring's skirt (std.ar15.slip_ring_skirt_d, 1.750), where they go.
Worked out 1.74 in ± 0.01 in used
An assumption for the drawing, not a reading: inside the delta ring's skirt (std.ar15.slip_ring_skirt_d, 1.750), where they go., harvested
The rear flanges' inside diameter1.6 in ± 0.03 in 40.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: clear of the barrel nut's toothed flange (std.ar15.barrel_nut_flange_od, 1.56) that the skirt surrounds.
Worked out 1.6 in ± 0.03 in used
An assumption for the drawing, not a reading: clear of the barrel nut's toothed flange (std.ar15.barrel_nut_flange_od, 1.56) that the skirt surrounds., harvested
The pitch of the round holes along the upper side faces and along the lower bevels0.732 in ± 0.01 in 18.6 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.732 in ± 0.01 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the lower bevel's holes run along their row through the camera (along.py at z 0.78, 1.75 below the top): centres 1.100, 1.835, 2.565, 3.295, 4.018, 4.733, 0.727 apart; the upper side's seven, 0.305 to 4.73, 0.7375 apart; their mean
The round holes along each upper side face (regular ones; the large one at the front apart)7ProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 7 count used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: none: a count. Read by counted on the right side, and the camera's circles at the readings laid back over the photo (circles.py): seven of one size, the eighth place the large one
The upper side face's first round hole (its centre) ahead of the rail's slot 00.311 in ± 0.03 in 7.9 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.311 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the seven holes' runs along their row (0.70 below the top) on the upper face's plane: centres 0.305, 1.06, 1.78, 2.54, 3.25, 4.00, 4.73; less the upper row's pitch times each one's place, 0.30 to 0.33, mean 0.311
The upper side face's round holes, their diameter0.59 in ± 0.03 in 15 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.59 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by each run's length along the row: 0.56 to 0.62
The upper side face's round holes' centres below the rail's top0.7 in ± 0.04 in 17.8 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.7 in ± 0.04 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the runs along the row at 0.70 below the top (along.py) are each as long as the holes are across (0.56 to 0.62 for 0.59), as a row through their centres is. A chord up and down one hole at column 760 (0.351 to 0.829) took the shelf's outer edge for the hole's top rim (neck_foot_below_top)
The large hole at the front of each upper side face, its centre ahead of the rail's slot 05.5 in ± 0.04 in 139.7 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 5.5 in ± 0.04 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by its rims carried back onto the upper face's plane: 5.105 and 5.890 fore and aft
The large front hole's length along the handguard0.785 in ± 0.04 in 19.9 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.785 in ± 0.04 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by its rims 5.105 and 5.890 from slot 0
The large front hole's height0.58 in ± 0.04 in 14.7 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.58 in ± 0.04 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by its rims 0.374 and 0.955 below the top
The large front hole's centre below the rail's top0.665 in ± 0.04 in 16.9 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.665 in ± 0.04 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the middle of its rims, 0.374 and 0.955 below the top
The round holes along each lower bevel8ProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 8 count used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: none: a count. Read by eight runs along the right lower bevel through the camera (along.py at z 0.78, 1.75 below the top): the first partly behind the rear QD socket's boss, the last run into the light past it
The lower bevel's first round hole (its centre) ahead of the rail's slot 00.373 in ± 0.02 in 9.5 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.373 in ± 0.02 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the six whole holes' centres less the bevel row's pitch (0.727) times each one's place: 0.37 to 0.39, mean 0.377; the first's own run ends at 0.66 = 0.36 + 0.30
The lower bevel's round holes, their diameter0.6 in ± 0.02 in 15.2 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.6 in ± 0.02 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by each whole run along the bevel: 0.595 to 0.605
M-LOK slots in each lower side face3ProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 3 count used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: none: a count. Read by counted on the right side: three, on the 40 mm pitch (the camera's fit)
The lower side face's first M-LOK slot (its centre) ahead of the rail's slot 01.4 in ± 0.03 in 35.6 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 1.4 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the camera's own fit of the row: 1.402; its runs along the row's middle (along.py): the first from 0.745 to 2.045, centre 1.395
The lower side face's first M-LOK slot (its centre) ahead of the receiver's front face2.436 in ± 0.08 in 61.9 mmProvisionalWorked out: {.rail_slot0_x} + {.mlok_slot0_from_slot0}
Worked out 2.436 in ± 0.08 in used
{.rail_slot0_x} + {.mlok_slot0_from_slot0}, harvested
The M-LOK slots' centre line (and the QD sockets') below the rail's top1.31 in ± 0.03 in 33.3 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 1.31 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the camera's fit of the row: 1.310; the QD sockets' rims read their centres 1.256 and 1.294 below
The M-LOK faces' distance from the bore axis0.915 in ± 0.003 in 23.2 mmConfirmedWorked out: {.width} / 2
Worked out 0.915 in ± 0.003 in used
{.width} / 2, harvested
The room inside its M-LOK faces before the barrel (what an accessory's nuts may take)No value yetMissingNo source yet
Not published. It depends on the barrel under it, another part: left missing, and the check reads as unmade.
The rear QD socket's centre ahead of the rail's slot 0 (on each lower side face)0.266 in ± 0.03 in 6.8 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.266 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by its rim carried back onto the lower face's plane: 0.124 and 0.408 fore and aft, 1.108 and 1.403 below the top
The front QD socket's centre ahead of the rail's slot 0 (on each lower side face)5.6 in ± 0.03 in 142.2 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 5.6 in ± 0.03 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by its rim carried back onto the lower face's plane: 5.391 and 5.810 fore and aft, 1.109 and 1.479 below the top
The QD sockets' hole, its diameter0.34 in ± 0.05 in 8.6 mmProvisionalPhoto: the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566
Photo 0.34 in ± 0.05 in used
the maker's gallery picture MI-17M-BLK-2: the carbine length alone, from behind its right side and above, muzzle to the right, with a short M-LOK rail section beside it, 1200 x 566, harvested
Scale: a pinhole camera fitted to the rail's 15 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's three M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.33 px, max 4.8 px, f 3984 px, the lens 23.0 in away. Read by the two sockets' rims: 0.284 and 0.295 (rear, its rim half hidden by the lens's angle), 0.419 and 0.370 (front); their mean
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Drop-in handguard's front in its cap
Handguard mount
Drop-in handguard's hold
- Delta rings
- BCM Delta Ring Assembly - AR15
Gas system length
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $136.95 Black Nov 21, 2026, stock not said
- Midwest Gun Works $85.00 Black Nov 21, 2026, out of stock that day