Rail section
Magpul M-LOK® Aluminum Rail, 9 Slots
A nine-slot Picatinny rail section machined from aluminium and hard anodized black, for any M-LOK hand guard or forend: three screws and three cammed T-nuts hold it in three M-LOK slots side by side, and its recoil lugs sit in the slots. Its ends are bevelled. Magpul: "M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc."

- Weight
- 0.71 oz ± 0.15 oz Provisionalworked out: The rail's own aluminium: the model's volume, 0.4509 cubic inches (pipeline/blender/magpul_mlok_aluminum_rail_section.py's manifest for this length, app/public/models/magpul-mlok-aluminum-rail-section-9-slot.json volume_in3, the screws apart), times std.density.aluminium (1.568 oz to the cubic inch: the alloy isn't stated, "Machined from milspec-anodized aluminum"): 0.707 oz. The ± is the height's (± 0.03 in over its length and the width under its head) and the alloy's 4%.
- Lowest price
- $21.76 at Primary Arms, read Nov 17, 2026
- Maker's number
- MAG583
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- magpul.com
Added to “22RB .22 LR rifle”, a build on the start page, where the designer starts a new rail section.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (along the handguard)3.943 in ± 0.02 in 100.2 mmConflictWorked out: {.rail_slot0_x} + 8 * {std.picatinny.slot_pitch} + {.front_block}
Worked out 3.943 in ± 0.02 in used
{.rail_slot0_x} + 8 * {std.picatinny.slot_pitch} + {.front_block}, harvested
Published “The overall length of this rail is 4.1".”
Midwest Gun Works, Magpul Aluminum M-LOK Rail Section, 9 Slots (MAG583), a seller, read Oct 29, 2026 the page, harvested Oct 29, 2026
Magpul's maximum.
Magpul's own figure is a maximum (max_length), and the part is under it; the sellers' figures repeat that maximum. Its slots on the standard's pitch and its own end blocks, each as long as the three- and five-slot's are (0.395 and 0.403 in) within their ±.
blocks and mgw differ by 0.157 in beyond what each states it is good to.
The base's length, tip to tip of its arched ends.
Maximum overall length, as Magpul states it4.1 in 104.1 mmConfirmedPublished: Magpul, M-LOK Aluminum Rail Sections (GIS sheet, MAG580-MAG583_M-LOK_Aluminum_Rail_Sections_GIS_01.pdf), the maker, read Oct 29, 2026
Published “MAG583 - 9 Slots, max overall length of 4.1”” used
Magpul, M-LOK Aluminum Rail Sections (GIS sheet, MAG580-MAG583_M-LOK_Aluminum_Rail_Sections_GIS_01.pdf), the maker, read Oct 29, 2026 the page, harvested Oct 29, 2026
A bound, not the length: the test holds the length under it.
Height (its rail's top above the handguard's face it sits on)0.24 in ± 0.03 in 6.1 mmProvisionalWorked out: {magpul-mlok-aluminum-rail-section-5-slot.height}
Worked out 0.24 in ± 0.03 in used
{magpul-mlok-aluminum-rail-section-5-slot.height}, harvested
Photo 0.2 in ± 0.04 in
Midwest Gun Works, MAG583.jpg, 1500 x 1500: from above its near side, harvested
Scale: an orthographic camera fitted to a tooth and its neighbour near the middle: one pitch between their near top corners (615, 918) and (750, 973); across, the tooth's top from its near corner to the far silhouette (899.6, 803.9) as the flat and the far bevel out to the widest (0.70 to 0.75 in). Read by the tooth's near top edge (750, 973) to the base's near edge under it (745, 1044): 67.6 px across the rail's direction: 0.20 in with the body under the head the standard's lower gauge line's width. The photo is close (the pitch 127 to 150 px along the part), the picks good to 3 to 5 px: the ±
Photo 0.27 in ± 0.05 in
Magpul, on an MOE SL hand guard, close and soft, harvested
Scale: a camera fitted to its teeth near its middle screw: 74.7 px a pitch along it, the top flat's 0.656 in across. Read by along a tooth: its top flat's near edge to where its side meets the hand guard's face (the start of the darkest band, its shadow): 27.5 px. Sensitive to the camera's elevation, which the flat's far edge sets only to within a few pixels: the ±
The line's figure, read on the five-slot with a check on the fit; this length's two photos, each through a camera fitted to its own teeth, bracket it (0.20 and 0.27) within their ±.
The line's figure, with the reason in its source.
Width (side to side, at its widest)0.835 in ± 0.005 in 21.2 mmConfirmedWorked out: {std.picatinny.top_width}
Worked out 0.835 in ± 0.005 in used
{std.picatinny.top_width}, harvested
The head's widest is the standard's: Magpul, "various 1913 Picatinny spec rail-mounted accessories".
Width of the base's flat face (the body's foot, on the hand guard's face)0.6 in ± 0.01 in 15.2 mmProvisionalPhoto: Primary Arms, MAG583_02.jpg: its underside, square on
Photo 0.6 in ± 0.01 in used
Primary Arms, MAG583_02.jpg: its underside, square on, harvested
Scale: its through holes eight standard pitches apart, in the base's plane: 496.6 px to the inch. Read by the base's flat face between the two lit creases along its length (rows 576 and 875 at column 1180, 581 and 880 at 1990, 570 and 868 at 220: 298 to 299 px), the teeth's widest standing out past them to the silhouette (0.81 to 0.83 in). Which way the faces outside the creases lean isn't read; drawn as the head's lower faces carried on at 45 degrees
The section under the head: the head's lower 45 degree faces carried on past the lower gauge line until they are this wide (0.228 in under the rail's top), and upright from there to the base, as the clamps' hooks need room under the head (rail-sections.test.ts) and as the photos of the underside show the base: narrower than the head by 0.11 in each side. Until 2026-10-29 the body was drawn upright at the lower gauge line's width (.748), an assumption, and three clamps' hooks stood in it. Midwest Gun Works' photos from above show a dark band 30 px deep under the head's widest on the near side, which a body undercut so far shows only as its shadow on the white ground: said in height's note.
Rail slots9ConfirmedPublished: Magpul, M-LOK® Aluminum Rail, 9 Slots (MAG583), the maker, read Oct 29, 2026
Published “M-LOK® Aluminum Rail, 9 Slots” used
Magpul, M-LOK® Aluminum Rail, 9 Slots (MAG583), the maker, read Oct 29, 2026 the page, harvested Oct 29, 2026
Magpul's name for it; counted on its studio photo (9 grooves, 8 teeth between them and an end block at each end).
Rear rail slot's centre ahead of the part's rear end0.395 in ± 0.008 in 10 mmCorroboratedPhoto: Primary Arms, MAG583_02.jpg, 2200 x 1467: its underside, square on
Photo 0.395 in ± 0.008 in used
Primary Arms, MAG583_02.jpg, 2200 x 1467: its underside, square on, harvested
Scale: its three through holes (circles fitted to their white: 315.9, 1096.2 and 1881.2 px), the first and last eight standard pitches apart, at the base's own plane: 496.6 px to the inch. Read by the base's tip (120 px) to the first hole's centre: 0.3945 in
Photo 0.399 in ± 0.008 in
Primary Arms, MAG583_01.jpg, 2200 x 1467: from above, square on, no screws, harvested
Scale: its first and last through holes (321.8 and 1877.6 px), eight pitches apart at the base's plane: 493.6 px to the inch. Read by the base's tip (125 px) to the first hole's centre: 0.3987 in
Photo 0.405 in ± 0.015 in
Magpul's studio photo, from high over one end, harvested
Scale: its first and last through holes eight standard pitches apart, at the base's plane. Read by the base's tip to the near hole along the line through the holes
The base's own plane, square on and nearest the lens, at the scale of the holes in it; Primary Arms' view from above and Magpul's steep photo agree within their ±.
Front end block: the last rail slot's centre to the part's front end0.396 in ± 0.008 in 10.1 mmCorroboratedPhoto: Primary Arms, its underside
Photo 0.396 in ± 0.008 in used
Primary Arms, its underside, harvested
Scale: as for rail_slot0_x. Read by the last hole's centre to the base's tip (2078 px): 0.3963 in
Photo 0.398 in ± 0.008 in
Primary Arms, from above, harvested
Scale: as for rail_slot0_x. Read by the last hole's centre to the base's tip (2074 px): 0.3979 in
As for rail_slot0_x.
Within its ± of the rear one: the part is the same both ways round.
The end bevel's run: from the base's tip in to the bevel's top edge (along the part)0.131 in ± 0.025 in 3.3 mmProvisionalWorked out: ({magpul-mlok-aluminum-rail-section-3-slot.end_bevel_run} + {magpul-mlok-aluminum-rail-section-5-slot.end_bevel_run}) / 2
Worked out 0.131 in ± 0.025 in used
({magpul-mlok-aluminum-rail-section-3-slot.end_bevel_run} + {magpul-mlok-aluminum-rail-section-5-slot.end_bevel_run}) / 2, harvested
Screws (and T-nuts) it is held by3CorroboratedPublished: Midwest Gun Works, Magpul Aluminum M-LOK Rail Section, 9 Slots (MAG583), a seller, read Oct 29, 2026
Published “Included with this premium piece is 3 cammed T-nuts and 3 recoil/impact mitigation lugs” used
Midwest Gun Works, Magpul Aluminum M-LOK Rail Section, 9 Slots (MAG583), a seller, read Oct 29, 2026 the page, harvested Oct 29, 2026
Photo 3 count
a photo on file, harvested
Scale: none: a count. Read by three T-nuts and three screws beside it in Midwest Gun Works' photo; three counterbores in Magpul's; three screws in it on a hand guard
The seller's sentence, counted on three photos.
Rail pitches from one screw to the next4ProvisionalPhoto: a photo on file
Photo 4 count used
a photo on file, harvested
Scale: its grooves, counted. Read by its through holes stand in the first, fifth, ninth grooves' floors: 4 pitches apart
The first screw stands in the first groove's floor (rail_slot0_x).
M-LOK slots its T-nuts span3CorroboratedWorked out: {.screw_count}
Worked out 3 count used
{.screw_count}, harvested
Its seat on the M-LOK face: the centre of the M-LOK slot its rear T-nut is in, ahead of its rear end0.789 in ± 0.012 in 20 mmCorroboratedWorked out: {.rail_slot0_x} + {std.mlok.interval} / 2
Worked out 0.789 in ± 0.012 in used
{.rail_slot0_x} + {std.mlok.interval} / 2, harvested
Its three T-nuts are one M-LOK slot pitch apart (the screws over the first, fifth and ninth grooves): each in the rear half of its slot. Magpul's photos of it on a hand guard's side face (4544d18032d6, 1565ec2733f0) have its screws over the face's slots' centres, half an interval ahead of this seat: which half a nut is in isn't published, and the app's places, half a slot apart, are the same either way.
Reach inside the handguard (below the mounting face, tightened)No value yetMissingNo source yet
Not published: Magpul's M-LOK tips sheet sets the nut's top level with the recoil lug's bottom edge and gives neither's size.
The screws' counterbores, across0.37 in ± 0.015 in 9.4 mmProvisionalPhoto: Primary Arms, from above
Photo 0.37 in ± 0.015 in used
Primary Arms, from above, harvested
Scale: its holes' scale at the base (493.6 px/in) brought to the rail's top as the seven-slot's photo from the same seller has it (1.8% larger): about 502 px to the inch. Read by column 322 across the rear counterbore: its dark ring from 640 to 826 px (186 px), the through hole's white inside it
The screws' button heads, across0.205 in ± 0.04 in 5.2 mmProvisionalWorked out: ({magpul-mlok-aluminum-rail-section-3-slot.screw_head_d} + {magpul-mlok-aluminum-rail-section-5-slot.screw_head_d}) / 2
Worked out 0.205 in ± 0.04 in used
({magpul-mlok-aluminum-rail-section-3-slot.screw_head_d} + {magpul-mlok-aluminum-rail-section-5-slot.screw_head_d}) / 2, harvested
How far below the rail's top the screws' heads seat (the counterbore's floor)0.2 in ± 0.03 in 5.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the counterbore's floor in profile. The heads are down in the counterbores below the grooves' floors in every photo with the screws in; their seat is put 0.04 in above the base.
Worked out 0.2 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file shows the counterbore's floor in profile. The heads are down in the counterbores below the grooves' floors in every photo with the screws in; their seat is put 0.04 in above the base., harvested
The screws' button heads, high0.08 in ± 0.02 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no camera is fitted to a photo of its screws from the side; a button head about a third as high as it is wide.
Worked out 0.08 in ± 0.02 in used
An assumption for the drawing, not a reading: no camera is fitted to a photo of its screws from the side; a button head about a third as high as it is wide., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
M-LOK
- Uppers
- Nordic Components 22RB .22 LR upper, 16" (fit unchecked), Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12" (fit unchecked), Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16" (fit unchecked)
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 12.7" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2 (fit unchecked), Aero Precision AR15 15" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" S-ONE M-LOK Handguard (fit unchecked), Aero Precision AR15 16.6" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 7.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 9.3" R-ONE M-LOK handguard (fit unchecked), BCM MCMR-10 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-13 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-15 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK (fit unchecked), Expo Arms Free Float AR-15 Handguard - M-LOK - 15" (fit unchecked), Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 15" Super Modular Rail MK16 M-LOK (fit unchecked), Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), MAS Defense 12.62" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 15" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 9.87" NERO M-LOK FREE FLOAT (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine) (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length) (fit unchecked), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15") (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $21.76 Nov 17, 2026, in stock that day
- Midwest Gun Works $23.70 Nov 21, 2026, in stock that day
- Magpul $26.95 Nov 21, 2026, stock not said