Handguard
BCM MCMR-15 (M-LOK® Compatible* Modular Rail)
Bravo Company's 15 in free-float M-LOK handguard: "Precision Machined Aerospace 6061-T6 Aluminum Alloy", "Hard Coat Anodized per Mil-A-8625F, Type III, Class 2", "mounting interfaces on seven sides in addition to the baked in MIL-STD-1913 at the 12 O'Clock position", clamped at 12 o'clock on its own steel barrel nut by two cross bolts (US Patent 8904691). "Designed to be used with pistol length, carbine length, mid length, or Mil-Spec M16 rifle length gas systems; all with a low profile gas block." The asterisk in its name is BCM's: "*M-LOK® is a registered trademark of Magpul Industries Corp."

- Weight
- 11.5 oz ± 0.1 oz Confirmedworked out: {.weight_handguard} + {.weight_hardware}
- Lowest price
- $234.95 at BCM, read Nov 21, 2026 (Black)
- Maker's number
- BCM-MCMR-15-556-BLK
- Colours
- Black, Flat Dark Earth
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “BCM 16 in mid-length”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Weight, the handguard alone9.2 oz ± 0.05 ozConfirmedPublished: Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026
Published “Handguard alone weighs 9.2 oz” used
Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Weight, its mounting hardware2.3 oz ± 0.05 ozConfirmedPublished: Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026
Published “Handguard mounting hardware 2.3 oz” used
Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
The manual's bill of materials: the barrel nut, two clamp blocks, the index plate and the two cross bolts.
Length, end to end (the rear end to the tips of the flare)15 in ± 0.05 in 381 mmConfirmedPublished: Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026
Published “Actual length when measured to flare is 15.0"” used
Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 15.03 in ± 0.04 in
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres; the side faces' M-LOK row (pitch 186.3 px for 40 mm) for what stands at their depth, k 1.0205. Read by the silhouette's two ends (px 114 and 1892) as rail coordinates -1.986 and 36.937, each brought to its true place about the image's centre: -1.598 and 36.545 pitches. Rifle Supply's photo 513799b7a6bd reads 15.07 and Dirty Bird's dd246b2375ad 15.05 the same way
The maker's figure; three photos read 0.03 to 0.07 more, within what its one decimal and their ± allow.
BCM's "to flare" is the whole length: the side faces run forward into two points (the flare), 0.6 in past the rail's last slot. The photos read 15.03 to 15.07 at the scale of the side faces, where both ends are.
Width across the flats (3 to 9 o'clock)1.5 in ± 0.05 in 38.1 mmConfirmedPublished: Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026
Published “1.5" Wide” used
Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Height (the rail's top to the bottom flat)1.944 in ± 0.02 in 49.4 mmProvisionalPhoto: Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768
Photo 1.944 in ± 0.02 in used
Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768, harvested
Scale: its own rail's slots, column by column: the pitch beside each column (29.0 to 29.6 px through the image's middle: 74 to 75 px/in). Read by ten columns through the image's middle (x 498 to 762), each through a tooth: its top edge to the bottom edge at the 50% level, 144.2 to 144.8 px, 1.926 to 1.956 in at the pitch beside it; toward the photo's ends the same reading runs to 2.02, the pitch there shrinking faster than the heights do
Not published. From the middle of the side faces' slots the top reads 1.196 above and the bottom 0.758 below: a regular octagon 1.5 in across the flats about the bore puts the bottom at 0.75.
Inside diameter1.3 in ± 0.05 in 33 mmConfirmedPublished: Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026
Published “1.3" Inside Diameter” used
Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Inner Diameter 1.30 in”
Primary Arms, Bravo Company Manufacturing MCMR Free Float AR-15 Handguard - M-LOK - 15" (BCM-MCMR-15-556-BLK), specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
The maker's; the seller repeats it.
The round bore at its rear end, which goes over the barrel nut. Ahead of it the inside follows the outside (Primary Arms' three-quarter view of the muzzle end, 0e53fbf9dd91, shows flat inner walls): the model takes 1.3 in across the inner flats.
The gap left between its rear end and the upper receiver0.022 in ± 0.018 in 0.6 mmConfirmedPublished: BCM, Installation Manual for BCM KMR Series Handguards (KMR-A, MCMR, QRF), Rev. 4/21, page 2, step 14, the maker, read Oct 5, 2026
Published “NEVER seat the handguard down firmly against the upper-receiver. Because of the tolerances of the upper receiver, a small gap will likely remain between the upper receiver and the handguard. A minimum gap of .005" should exist to maintain the free-float of the barrel. Note: The gap should not exceed .040".” used
BCM, Installation Manual for BCM KMR Series Handguards (KMR-A, MCMR, QRF), Rev. 4/21, page 2, step 14, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
The middle of BCM's range, with half the range as its ±.
Its rear end against the receiver's front face (negative: behind it)-0.422 in ± 0.02 in -10.7 mmConfirmedWorked out: 0in - {std.ar15.upper_barrel_thread_length} + {.receiver_gap}
Worked out -0.4225 in ± 0.02 in used
0in - {std.ar15.upper_barrel_thread_length} + {.receiver_gap}, harvested
Photo -0.433 in ± 0.03 in
Primary Arms' gallery for the complete upper BCM-URG-MID-16-MCMR-15, _02: its left side seen level, 2200 x 1467, harvested
Scale: the receiver's two lug holes (px 2032.3, 810.4 and 1515.8, 810.7), std.ar15.pin_spacing apart: 81.02 px/in; the receiver's own 13 rail slots read 0.395 a pitch on it. Read by the handguard's rearmost rail slot's centre 7.226 in ahead of the takedown hole, less this ledger's rail_slot0_from_rear (0.623, BCM's photo of the handguard alone) and the receiver's front face (std.ar15.upper_front_face_x, 7.036)
A check through two photos, each with its own ±.
BCM's own rule for where it stops; the photos of the complete upper put it within 0.01 in of that.
It slides back over its barrel nut to the receiver's front shoulder, where the barrel-nut thread begins (std.ar15.upper_barrel_thread_length behind the front face), less the gap BCM's manual asks for. Its rail's rear end and its body's are one plane (BCM's and Rifle Supply's photos: within 0.02 in).
The largest barrel its barrel nut goes over1 in ± 0.05 in 25.4 mmConfirmedPublished: Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026
Published “The barrel nut will fit over all mil-spec diameter barrels (max of 1")” used
Bravo Company USA, BCM® MCMR-15 (M-LOK® Compatible* Modular Rail) (BCM-MCMR-15-556-BLK), Description, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Its rail's top above the bore axis1.2 in ± 0.02 in 30.5 mmCorroboratedPhoto: Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768
Photo 1.2 in ± 0.02 in used
Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768, harvested
Scale: its own rail's slots, column by column: the pitch beside each column (29.0 to 29.6 px through the image's middle: 74 to 75 px/in). Read by the same columns: the tooth tops above the middle of the light showing through the side faces' slots (the axis of a tube with flats at 3 and 9 o'clock): 1.18 to 1.20 in, median 1.196; the ± covers the rail's near or far edge being the one seen (1% either way from 30 in) (heights.py)
Photo 1.217 in ± 0.02 in
Primary Arms' gallery for the complete upper BCM-URG-MID-16-MCMR-15, _02: its left side seen level, 2200 x 1467, harvested
Scale: the receiver's two lug holes, std.ar15.pin_spacing apart: 81.02 px/in. Read by the handguard rail's tooth tops over its first six inches (7.9 to 14 in ahead of the takedown hole), 2.094 in above the line through the lug holes, less the bore's height above it (std.ar15.bore_axis_y, 0.8775); the receiver's own tooth tops read 2.082, a pixel lower (urg_rail.py)
The handguard's own photo, from its own axis; the installed reading agrees within its ±.
Its tube is taken to be about the bore (it clamps round its barrel nut). On the complete upper its rail's tooth tops read level with the receiver's within a pixel (2.094 against 2.082 above the pin line, 81 px/in). BCM's own two photos of the complete upper, at 55 px/in and with a scale that runs 3% along the rail, read both rails 2.04 to 2.06.
Slots in its top rail36ProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 36 count used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: none: a count. Read by the notches between the teeth along the top edge, each 45.7 px from the next: 36; the same count on Rifle Supply's (513799b7a6bd), Dirty Bird's (dd246b2375ad) and Primary Arms' (13f345fa4b4e) photos. The marks in the slots run T14 (rearmost) to T48, the frontmost slot unmarked
Its rail's rearmost slot (its centre) ahead of its rear end0.623 in ± 0.015 in 15.8 mmCorroboratedPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 0.623 in ± 0.015 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres. Read by the rear end of the rail's top edge (the first column whose silhouette top is within 4 px of the tooth tops, px 132.5): 1.582 pitches behind the first slot's centre
Photo 0.625 in ± 0.015 in
Rifle Supply's gallery, 173586952: the black handguard alone, its left side seen from about 18° above, 2000 x 2000, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres. Read by the same edge (mirrored px 167.5): 1.585 pitches behind the first slot's centre
Photo 0.641 in ± 0.02 in
Dirty Bird's gallery, the 15 in black: its left side from above, 1142 x 845, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres. Read by the same edge (mirrored px 42.5): 1.627 pitches behind the first slot's centre, at 71 px/in
The maker's own photograph at the largest scale; the other two read 0.002 and 0.018 more.
Read to the rail's own rear end, along the far edge of its top, which is where the slots are read: nothing to bring to another depth. The body's rear end is the same plane as far as the photos show (the silhouette's rearmost point, on the near side, reads 0.63 to 0.69 behind the slot by what is taken for its depth). Installed, the slot reads 7.226 in ahead of the takedown pin, which with rear_x makes this 0.61.
Its rail's rearmost slot (its centre) ahead of the receiver's front face0.19 in ± 0.02 in 4.8 mmProvisionalPhoto: Primary Arms' gallery for the complete upper BCM-URG-MID-16-MCMR-15, _02: its left side seen level, 2200 x 1467
Photo 0.19 in ± 0.02 in used
Primary Arms' gallery for the complete upper BCM-URG-MID-16-MCMR-15, _02: its left side seen level, 2200 x 1467, harvested
Scale: the receiver's two lug holes (px 2032.3, 810.4 and 1515.8, 810.7), std.ar15.pin_spacing apart: 81.02 px/in; the receiver's own 13 rail slots read 0.395 a pitch on it. Read by the gaps between the teeth 0.06 in below the tooth tops, each edge at the 50% level: the handguard's first slot's centre 7.226 in ahead of the takedown hole, less the receiver's front face (std.ar15.upper_front_face_x, 7.036). BCM's own two photos of the complete upper (a0e4baef2a6d, 12dd68abe371; 55 and 57 px/in) read 7.223 and 7.225 (urg_rail.py)
Worked out 0.2005 in ± 0.03 in
{.rear_x} + {.rail_slot0_from_rear}, harvested
Read where it matters, in the receiver's own frame on three photos; the other goes through the handguard's rear end, which the gap at the receiver moves.
Its rail's front end ahead of its last slot's centre0.283 in ± 0.015 in 7.2 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 0.283 in ± 0.015 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres. Read by the front end of the rail's top edge (the last column whose silhouette top is within 4 px of the tooth tops, px 1836.5): 0.718 pitches ahead of the last slot's centre. Rifle Supply's photo reads 0.294 and Dirty Bird's 0.305 the same way (railfront.py)
A slot's half width and one land of about the standard's width. The flare's tips are 0.32 in further forward.
M-LOK slots on each side face (3 and 9 o'clock)8ProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 8 count used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: none: a count. Read by the slots of the lower row in the photo (the 3 o'clock face), 186.5 px apart; eight on the 9 o'clock face in Rifle Supply's photo (513799b7a6bd), and eight on Primary Arms' level photo (13f345fa4b4e)
The side faces' rearmost M-LOK slot (its centre) ahead of the rail's rearmost slot's centre2.342 in ± 0.01 in 59.5 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 2.342 in ± 0.01 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres; the row's own pitch gives k 1.0205. Read by the eight slots' sixteen ends fitted to one pitch and one length (rms 0.006 in): the first slot's rear end at rail coordinate 4.078, true 4.345 pitches (1.7117 in), plus half the standard's slot (std.mlok.slot_length). Rifle Supply's photo reads 1.7115 and Dirty Bird's 1.7115 for the same end (ruler.py)
5.94 rail pitches: the M-LOK slots' centres fall on the rail's slots' (every fourth), within 0.02 in.
M-LOK slots on each face between (1:30, 4:30, 7:30 and 10:30)8ProvisionalPhoto: Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768
Photo 8 count used
Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768, harvested
Scale: none: a count. Read by the upper and the lower row of the level photo (the 1:30 and 4:30 faces), eight each and at the same columns (169.5 to 989.5 px for their rear ends, both rows); eight on the 1:30 face in BCM's photo (3c44f96c9c21) and on the 10:30 face in Rifle Supply's
The between faces' rearmost M-LOK slot (its centre) ahead of the rail's rearmost slot's centre1.952 in ± 0.01 in 49.6 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 1.952 in ± 0.01 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres; the row's own pitch gives k 1.0193. Read by the eight slots' sixteen ends fitted to one pitch and one length (rms 0.003 in): the first slot's rear end at rail coordinate 3.085, true 3.355 pitches (1.3218 in), plus half the standard's slot. Rifle Supply's photo reads 1.3171 and Dirty Bird's 1.3163 for the same end
One rail pitch behind the side faces' row (0.390 here against 0.394).
The side faces' rearmost M-LOK slot (its centre) ahead of the receiver's front face2.532 in ± 0.03 in 64.3 mmProvisionalWorked out: {.rail_slot0_x} + {.mlok_side_slot0_from_rail_slot0}
Worked out 2.532 in ± 0.03 in used
{.rail_slot0_x} + {.mlok_side_slot0_from_rail_slot0}, harvested
The between faces' rearmost M-LOK slot (its centre) ahead of the receiver's front face2.142 in ± 0.03 in 54.4 mmProvisionalWorked out: {.rail_slot0_x} + {.mlok_diag_slot0_from_rail_slot0}
Worked out 2.142 in ± 0.03 in used
{.rail_slot0_x} + {.mlok_diag_slot0_from_rail_slot0}, harvested
The underside's foremost M-LOK slot (its centre) ahead of the side faces' foremost slot's0.007 in ± 0.03 in 0.2 mmProvisionalPhoto: BCM's gallery for its KAG, BCM-KAG-MCMR-BLK-5: the KAG on an MCMR's underside, from a little below the rifle's right side, muzzle to the lower right, 1500 x 1000
Photo 0.007 in ± 0.03 in used
BCM's gallery for its KAG, BCM-KAG-MCMR-BLK-5: the KAG on an MCMR's underside, from a little below the rifle's right side, muzzle to the lower right, 1500 x 1000, harvested
Scale: M-LOK's 32 mm slot (std.mlok.slot_length) on the faces beside it: the side face's foremost slot's rim 181 px long, the 4:30 face's beside it 174 px; 139 px to the inch. Read by the photo turned 31.75° about (850, 650) to level the handguard's lower edge (a line through 142 columns, rms 0.3 px). Along that edge the underside's band is dark from 648 to 733 px and from 782 to 952 (170 px, a 32 mm slot; the bright web between, 49 px, is M-LOK's 8 mm), the front run ending where the muzzle end's slope begins (954); on a row through the side face's foremost slot its rim runs 774 to 955. The two centres stand 1 px apart, the underside's ahead. The 4:30 face's slot above, 722 to 896, is 55.5 px (0.40 in, one rail pitch) behind both. The lens stood square to the rail there (light shows through that slot to the far face along its whole length), so the underside's depth behind the side face moves it along the rail by less than the ±, which covers each end read to 2 px and the scale.
In line with the side rows, and so one rail pitch (10 mm) ahead of the faces' between, as the side rows are: the underside's row is staggered as the side faces' is. BCM's photo of its Vertical Grip Mod 3 on an MCMR (a copy on file, -6) was taken from a little higher, and its lower edge is the corner below the 4:30 face: no slot of the underside shows in it. On the KAG's photo that slot ends within 2 px (0.015 in) of where the bottom flat ends and the muzzle end's slope begins. This length's figures put the flat's end 0.025 in behind the slot's front end, which the model cuts on into the slope's foot (the flat's end is the level outline's, 0.41 in behind the tips; read as the 13's and the 10's are read, this length's photo gives 0.36, which would leave 0.025 in of flat ahead of the slot).
M-LOK slots on the underside (6 o'clock)8ProvisionalWorked out: {.mlok_side_slots}
Worked out 8 count used
{.mlok_side_slots}, harvested
The underside's rearmost M-LOK slot (its centre) ahead of the receiver's front face2.539 in ± 0.04 in 64.5 mmProvisionalWorked out: {.mlok_side_slot0_x} + ({.mlok_side_slots} - {.mlok_bottom_slots}) * {std.mlok.slot_pitch} + {.mlok_bottom_front_from_side_front}
Worked out 2.539 in ± 0.04 in used
{.mlok_side_slot0_x} + ({.mlok_side_slots} - {.mlok_bottom_slots}) * {std.mlok.slot_pitch} + {.mlok_bottom_front_from_side_front}, harvested
The room inside its faces, from a face in to the barrel (what an M-LOK accessory's nuts may take)No value yetMissingNo source yet
Not sourced: it depends on the barrel and gas block under it, other parts. Its wall is 0.1 in by BCM's two figures (1.5 wide, 1.3 inside).
The rail's depth, its top to where the neck's wall begins0.215 in ± 0.02 in 5.5 mmProvisionalPhoto: Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768
Photo 0.215 in ± 0.02 in used
Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768, harvested
Scale: its own rail's pitch beside the column (28.6 px: 72.6 px/in). Read by a column clear of holes (x 140): the teeth and the rail's side from row 297 to 312 (16 rows), the last six of them the dark band of its underside's slope; the neck's lit wall begins at row 313
Since 2026-10-12 the model's rail meets the neck's walls 0.177 in under its top: where the standard's lower faces, carried on at their 45 degrees, reach a neck as wide as neck_width has it (0.70 in). That is 0.038 in short of this reading, outside its ±. A neck 0.63 in wide would put it here, and BCM's own diagram draws 0.61 (neck_width's note): the neck's width is the open figure, and an end view is what is asked for. The inside's roof is still drawn a wall under this height.
The slope under the rail's edges, its height as seen from the side0.08 in ± 0.02 in 2 mmProvisionalPhoto: Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768
Photo 0.08 in ± 0.02 in used
Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768, harvested
Scale: its own rail's pitch beside the column (28.6 px: 72.6 px/in). Read by the dark band under the rail's widest line, rows 307 to 312 (six rows) at x 140
A reading of the photo, and since 2026-10-12 not what the rail is drawn by: its head is the standard's in section (std.picatinny.*, in the ledger since 2026-10-05; pipeline/blender/lib.py rail_head), whose lower faces run from 0.1105 in under the top in to the neck's walls, 0.066 in as seen from the side: inside this reading's ±. Until then both of the rail's edges were sloped by this figure, the standard's own section not being in the ledger: a flat 0.02 in too wide and lower faces 0.024 in outside the standard's, in both of which every clamp stood. The builder still finds the rail's front end in the traced outline by it.
Where the upper faces end and the neck under the rail begins, above the bore0.71 in ± 0.03 in 18 mmProvisionalPhoto: Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768
Photo 0.71 in ± 0.03 in used
Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768, harvested
Scale: its own rail's pitch beside the column (28.6 px: 72.6 px/in), 1% more for the near wall. Read by a column clear of slots and holes (x 140): the dark line where the upper face meets the neck's wall at row 333.5, 52.4 px above the line through the middles of the side faces' slots
The neck's width under the rail0.701 in ± 0.06 in 17.8 mmProvisionalWorked out: 2 * ({.width} / 2 + {.width} / 2 * 0.41421356 - {.neck_base_above_bore})
Worked out 0.7013 in ± 0.06 in used
2 * ({.width} / 2 + {.width} / 2 * 0.41421356 - {.neck_base_above_bore}), harvested
0.41421356 is tan 22.5°: half a regular octagon's face over its half width.
No view shows it square on. Where a 45° face of a regular octagon 1.5 in across reaches neck_base_above_bore it is 0.35 in from the middle. BCM's own diagram of the section (98845584f4fa, undimensioned) draws the neck 0.61 in wide to its 1.5 in body. And the rail's lower faces, the standard's since 2026-10-12, reach a neck this wide 0.177 in under the rail's top, where the side photo has the neck's wall begin 0.215 ± 0.02 under it (rail_body_height): a neck 0.63 in wide would agree with the photo, the standard and the diagram.
The lightening holes under the rail, their centres above the bore0.76 in ± 0.03 in 19.3 mmProvisionalPhoto: Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768
Photo 0.76 in ± 0.03 in used
Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768, harvested
Scale: its own rail's slots, column by column: the pitch beside each column (29.0 to 29.6 px through the image's middle: 74 to 75 px/in). Read by the light showing through twelve holes from side to side, through the image's middle: its centre 0.745 to 0.771 in above the line through the middles of the side faces' slots (median 0.755); a lens a few degrees above level sees the far wall's holes lower, which would put the near wall's up to 0.025 higher (heights2.py)
The lightening holes' pitch (oblong to oblong, round to round)0.788 in ± 0.003 in 20 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 0.788 in ± 0.003 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres. Read by the first and the sixteenth oblong hole at rail coordinates 3.917 and 33.926 (true, k 1.018): 2.0006 pitches apart on average (holes.py)
Two rail pitches: an oblong hole and a round one by turns, one rail pitch apart.
Lightening holes of each kind on each side16ProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 16 count used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: none: a count. Read by sixteen oblong holes from rail coordinate 3.92 to 33.93, a round one ahead of each (the last at 34.85, the rail's front end just ahead of it)
The rearmost oblong hole (its centre) ahead of the rail's rearmost slot's centre1.543 in ± 0.02 in 39.2 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 1.543 in ± 0.02 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres; k 1.018 for the neck's near wall. Read by the hole's dark outline's centroid at px 372.9: rail coordinate 3.63, true 3.917 pitches (holes.py)
An oblong hole's length0.39 in ± 0.03 in 9.9 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 0.39 in ± 0.03 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: the side faces' M-LOK row: 118.0 px/in at the neck's near wall. Read by the first and the last oblong hole's outlines' long axes (second moments): 0.384 and 0.391
An oblong hole's width0.2 in ± 0.02 in 5.1 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 0.2 in ± 0.02 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: the side faces' M-LOK row: 118.0 px/in at the neck's near wall. Read by the same two outlines' short axes: 0.203 and 0.195
An oblong hole's slant from the rail's line (its top toward the muzzle)58° ± 5°ProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 58 deg ± 5 deg used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: none: an angle in the image, the rail level in it within 0.03°. Read by the same two outlines' long axes: 56° and 60° from the rail's line, as seen from 20° above (which steepens a slant by a degree or two)
A round lightening hole's diameter0.19 in ± 0.02 in 4.8 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 0.19 in ± 0.02 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: the side faces' M-LOK row: 118.0 px/in at the neck's near wall. Read by nine round holes' outlines: 0.20 to 0.22 along the rail (the wall's thickness shows in it), 0.17 to 0.18 across as seen from 20° above (0.18 to 0.19 square on)
The rear cross-bolt hole (its centre) ahead of the rail's rearmost slot's centre0.152 in ± 0.02 in 3.9 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 0.152 in ± 0.02 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres; k 1.018. Read by the hole's dark outline's centroid at px 208.5: true rail coordinate 0.386 pitches (holes.py)
The two cross-bolt holes, centre to centre0.217 in ± 0.01 in 5.5 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 0.217 in ± 0.01 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch): each column read as a rail coordinate between the slot centres. Read by the two outlines' centroids at px 208.5 and 234.2: 0.551 pitches apart
A cross-bolt hole's diameter, as it shows0.18 in ± 0.02 in 4.6 mmProvisionalPhoto: BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333
Photo 0.18 in ± 0.02 in used
BCM's gallery for the Flat Dark Earth MCMR-15, MCMR_15_FDE: the handguard alone, its right side seen from about 20° above, 2000 x 1333, harvested
Scale: the side faces' M-LOK row: 118.0 px/in. Read by the two outlines: 0.19 by 0.17 each
The cross-bolt holes' centres above the bore0.6 in ± 0.02 in 15.2 mmProvisionalPhoto: Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768
Photo 0.6 in ± 0.02 in used
Primary Arms' gallery, BCM-MCMR-15-556-BLK_01: the handguard alone, its right side seen level, 1152 x 768, harvested
Scale: its own rail's pitch beside them (29.5 px: 75 px/in). Read by the two holes' centres at rows 341.0 and 341.4: 0.598 and 0.597 in above the line through the middles of the side faces' slots; they read 0.16 by 0.17 across here (heights2.py)
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $234.95 Black Nov 21, 2026, in stock that day
- BCM $234.95 Flat Dark Earth Nov 21, 2026, in stock that day
- Primary Arms $234.95 Flat Dark Earth Nov 21, 2026, in stock that day
- Primary Arms $234.95 Black Nov 21, 2026, in stock that day
- KYGUNCO $234.95 Black Nov 21, 2026, in stock that day
- Impact Guns $234.95 Black Nov 21, 2026, in stock that day
- Alexander's Store $234.95 Black Nov 18, 2026, in stock that day
- Scheels $239.99 Black Oct 5, 2026, in stock that day
- Right To Bear $250.00 Black Nov 21, 2026, in stock that day
- Rifle Supply $234.99 Black Nov 21, 2026, out of stock that day