Red dot mount
Midwest Industries MK2 QD T2 Aimpoint Mount, Low
A quick-detach mount for Aimpoint Micro footprint red dots at the maker's low height (its option "Low", number MI-MK2-QDT2L; Primary Arms the same): the deck plate stands on the clamp base with no web between. The maker: "Available in Low, Lower 1/3 Cowitness, Absolute Cowitness, and NV 2.26” height", "Patented QD lever by Elite Defense", "Hard Coat Anodized 6061 Aluminum for a lifetime of service". Primary Arms: "This is the low height, which keeps the optic close to the rail for a compact, low-profile setup that stays out of the way." No page gives its height: it is read on the maker's picture of it, which puts a T-2's axis 1.11 in over the rail.

- Weight
- 1.71 oz ± 0.35 oz Provisionalworked out: The model's volume: the aluminium 1.0299 cubic inches as the maker's 6061 (std.density.aluminium, 0.098 lb a cubic inch) and the steel 0.02 (the lock button, the nut's screw, the shaft in its slot) as steel (std.density.steel), from pipeline/blender/midwest_mk2_qd_t2.py's manifest. The ± is a fifth: the widths across it are the 1/3's assumptions. Within a hundredth of an ounce of Primary Arms' 1.7 ounces for the older generation's QD Low (MI-QDT1-L), another product: not used.
- Lowest price
- $109.95 at Primary Arms, read Nov 21, 2026 (Black), out of stock that day
- Maker's number
- MI-MK2-QDT2L
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- midwestindustriesinc.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The deck's top (where the dot's base sits) above the rail's top0.525 in ± 0.06 in 13.3 mmProvisionalPhoto: Midwest Industries' MI-MK2-QDT2L, also its picture for the Low option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (the 1/3 height in a like pose
Photo 0.525 in ± 0.06 in used
Midwest Industries' MI-MK2-QDT2L, also its picture for the Low option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (the 1/3 height in a like pose, harvested
Scale: the QD lever, the same part in both pictures: its tail 255 px high here (column 100: rows 505 to 760) and 143 px in the 1/3's (column 330), for its 0.497 in at the tail (the 1/3's profiles.lever). Read by under the deck's rear end, between its lower edge and the lever's top: 65 px of backdrop here (column 240: rows 473 to 538), 0.127 in at the lever's scale; 214 px in the 1/3's picture (column 430), 0.744 in at its lever's, where the 1/3's own figures have 0.693 (its deck plate's lower face, 0.927 over the rail, less the lever's top, 0.234): the same 7% taken off here, 0.118 in. The lever's top (0.234) and that and the deck plate (0.173)
"Low", "keeps the optic close to the rail": a claim the test holds the reading to (a T-2 on it stands lower than on the 1/3 height, below a standard rear sight's line), not a figure. The reading agrees with the picture's plain fact, that the deck plate stands on the base's top with nothing between: the 1/3's base top (0.35) and deck plate (0.173) come to 0.523.
The footprint's middle along the deck, ahead of the clamp's middle-0.01 in ± 0.015 in -0.3 mmProvisionalWorked out: {midwest-mk2-qd-t2-lower-13.deck_x}
Worked out -0.01 in ± 0.015 in used
{midwest-mk2-qd-t2-lower-13.deck_x}, harvested
The 1/3 height's reading, the only straight view of the deck over the base.
No straight side view of this height is on file: the deck over the base is the 1/3 height's, whose two straight side views are the only ones of any MK2 QD (one deck and one base in the maker's pictures of every height), said in the part's approximations.
Clamp length along the rail (at its foot)1.405 in ± 0.025 in 35.7 mmCorroboratedWorked out: {midwest-mk2-qd-t2-lower-13.mount_length}
Worked out 1.405 in ± 0.025 in used
{midwest-mk2-qd-t2-lower-13.mount_length}, harvested
The 1/3 height's reading, the only straight view of the base.
No straight side view of this height is on file: its clamp base is the 1/3 height's, whose two straight side views are the only ones of any MK2 QD (one base in the maker's pictures of every height), said in the part's approximations.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $109.95 Black Nov 21, 2026, out of stock that day