Optic
Aimpoint Micro T-2 Red Dot Reflex Sight
Aimpoint's Micro T-2, a 1x red dot with a 2 MOA dot and an 18 mm clear aperture, screwed to its mount by the Micro footprint (Primary Arms: "Compatible with Aimpoint Micro T-1/T-2/H-1 style mounts."). Its axis is 0.59 in over its own base: on the LRP mount with the 39 mm spacer it is sold on for an AR-15 (200198, "AR15 Ready") that is the sheet's 39 mm over the rail. Flip-up lens covers front and rear, a CR2032 under the intensity switch on its right side. The page linked is Bravo Company's for the sight alone: Aimpoint's own site isn't read.

- Weight
- 3.39 oz Conflictpublished: Aimpoint, Micro T-2 user manual ([13939-7], 2014, 2025), the PDF as T.REX ARMS hosts it: the sight on the standard mount (its Fig. 1), the maker, read Oct 6, 2026Its sources span 2.95 oz to 3.4 oz.
- Lowest price
- Sold in the Aimpoint Micro T-2 Red Dot Reflex Sight - AR15 Ready, not by itself
- Maker's number
- 200180
- Colour
- Aimpoint dark gray (the Micro's housing)
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Two-tone 16 in, Stealth Gray and soft-shooting”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (with its lens covers, closed)3.11 in 79 mmConfirmedPublished: Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026
Published “Size L x W x H (mm) Conf: 79 x 41 x 47 mm” used
Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Configuration 79 mm × 41 mm × 48 mm”
Aimpoint, Micro T-2 user manual ([13939-7], 2014, 2025), the PDF as T.REX ARMS hosts it: the sight on the standard mount (its Fig. 1), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The sheet printed for this item; the manual gives the same length.
The sheet's and the manual's "Conf" length: the sight with its lens covers ("Includes lens covers & mount"). Neither mount reaches past the covers in the side views, so it is this stack's length too. Scalarworks' side view of a T-2 with its covers closed, on a rail whose pitch scales it, reads 77.2 mm between the lids' faces and 78.1 to the rear lid's tab. With the covers raised, as every studio view has them and as the model is drawn, the sight is ring_span long.
The sight's own length, without its lens covers2.677 in 68 mmConfirmedPublished: Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026
Published “Size L x W x H (mm) Sight Only: 68 x 41 x 36 mm” used
Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Sight 68 mm × 41 mm × 36 mm”
Aimpoint, Micro T-2 user manual ([13939-7], 2014, 2025), the PDF as T.REX ARMS hosts it: the sight on the standard mount (its Fig. 1), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The sheet printed for this item; the manual gives the same.
"Sight Only": the bare sight, without the rubber lens covers whose rings wrap its two ends (the configuration's figures are the ones that include "lens covers & mount"). Not seen in any photo on file: every one has the covers on.
Overall width (the sight's own: its left flank to the face of the intensity switch on its right)1.614 in 41 mmConfirmedPublished: Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026
Published “Size L x W x H (mm) Conf: 79 x 41 x 47 mm” used
Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Configuration 79 mm × 41 mm × 48 mm”
Aimpoint, Micro T-2 user manual ([13939-7], 2014, 2025), the PDF as T.REX ARMS hosts it: the sight on the standard mount (its Fig. 1), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The sheet printed for this item; the manual gives the same.
The same 41 mm for the sight alone and for the configuration, so it is the sight's: neither says what it spans, and it is taken from the flat left flank to the face of the intensity switch, the furthest thing out on the right. The LRP mount's lever and its nut on the left may stand further out than the sight: its own width is on no page on file.
The sight's own height (its underside to the top of the turret housing)1.417 in 36 mmConfirmedPublished: Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026
Published “Size L x W x H (mm) Sight Only: 68 x 41 x 36 mm” used
Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Sight 68 mm × 41 mm × 36 mm”
Aimpoint, Micro T-2 user manual ([13939-7], 2014, 2025), the PDF as T.REX ARMS hosts it: the sight on the standard mount (its Fig. 1), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Worked out 1.401 in ± 0.04 in
{.height} - {.underside_above_clamp_bottom}, harvested
On the photo: the turret housing's top 2.739 in above the mount's bottom, and the sight's underside where the maker's 19 mm of spacer puts it over the base's top, 1.338 in: 35.6 mm.
The sheet printed for this item; the manual gives the same, and the photo reads within 1% of it.
From the sight's flat underside to the top of the housing round the elevation turret. Aimpoint's left profile of this part, at the scale the standard-mount photo gives, has the housing's top 35.6 mm above the underside as the maker's 19 mm of spacer places it: 1% under the maker's figure, inside its rounding. The model is drawn at the photo's size.
Height of the STANDARD configuration (200170: the low mount's bottom to the sight's top), not this part's1.85 in 47 mmConfirmedPublished: Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026
Published “Size L x W x H (mm) Conf: 79 x 41 x 47 mm” used
Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Configuration 79 mm × 41 mm × 48 mm”
Aimpoint, Micro T-2 user manual ([13939-7], 2014, 2025), the PDF as T.REX ARMS hosts it: the sight on the standard mount (its Fig. 1), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
At 47 mm the standard-mount photo's scale lands on a Picatinny rail's pitch in Scalarworks' side view of the same sight within 0.5%; at the manual's 48 it is 2% off. Two documents of the maker's that differ by a millimetre: both kept.
Printed on this item's own sheet as its "Conf" height, but it is the standard mount's: the scale of the standard-mount side photo, from which the sight's own sizes are read. The sheet says 47 mm and the manual 48.
Optical axis above the rail on the STANDARD mount (200170), not this part's0.787 in 20 mmConfirmedPublished: Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026
Published “Height of Optical Axis: Sight and mount – 20 mm (0.8 in) measured from top surface of Picatinny/Weaver rail” used
Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Configuration (no spacer) 20 mm / 0.8 in (measured from top surface of picatinny rail)”
Aimpoint, Micro T-2 user manual ([13939-7], 2014, 2025), the PDF as T.REX ARMS hosts it: the sight on the standard mount (its Fig. 1), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The sheet printed for this item; the manual gives the same.
The other listing's figure, kept so the two aren't confused: too low for an AR-15's stock. The 39 mm spacer adds the difference.
Optical axis above the rail's top (on the LRP mount with the 39 mm spacer)1.535 in 39 mmConfirmedPublished: Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026
Published “Sight, mount and high spacer – 39 mm (1.2 in) measured from top surface of Picatinny/Weaver rail” used
Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The sheet's line for "sight, mount and high spacer", and what the spacer is named for. Its inch figure is wrong: 39 mm is 1.54 in (the "1.2 in" is the 30 mm line's, printed twice). Its "Keyed Surface Mount: LRP Mount and 39 mm spacer included" says which mount and spacer this item has; Bravo Company: "The AR15 Ready configuration includes a 39mm spacer and LRP (Lever Release Picatinny) base". Where the rail's top lies inside the LRP mount isn't seen in a side view: the model's rail top is this far under the axis.
Optical axis above the sight's own base (the plane its footprint meets a mount's deck in: D101)0.589 in ± 0.037 in 15 mmProvisionalWorked out: {.axis_above_clamp_bottom} - {.underside_above_clamp_bottom}
Worked out 0.589 in ± 0.037 in used
{.axis_above_clamp_bottom} - {.underside_above_clamp_bottom}, harvested
1.927 in less 1.338 in, the two readings' ± together.
What the sight brings to any Micro-footprint mount: its axis this far over the deck it is screwed to. Read on Aimpoint's left profile of 200198 between the axis and the seam with the spacer, which the maker's two axis heights place (underside_above_clamp_bottom). On the LRP mount with the 39 mm spacer it puts the axis at the sheet's 39 mm, which is what the mount's deck height is worked out from (aimpoint-micro-lrp-39mm.deck_above_rail).
Clear aperture0.709 in 18 mmConfirmedPublished: Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026
Published “Clear Aperture: 18 mm (.71 in)” used
Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Clear aperture 18 mm”
Aimpoint, Micro T-2 user manual ([13939-7], 2014, 2025), the PDF as T.REX ARMS hosts it: the sight on the standard mount (its Fig. 1), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The sheet printed for this item; the manual gives the same.
Draws the lens at both ends; the front lens is tilted in its cell (the manual: "The optical system is designed for the front lens to be mounted this way") and is drawn square.
Weight (the sheet's configuration figure: lens covers and mount in it; the LRP stack's own isn't published)4.59 ozConflictPublished: Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026
Published “Weight (Conf): 130 g / 4.6 oz (Includes lens covers & mount)” used
Aimpoint, Micro T-2 spec sheet for item 200198 (M03616, Ed. 5-October-21), the PDF as T.REX ARMS hosts it, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Configuration 135 g / 4.8 oz”
Aimpoint, Micro T-2 user manual ([13939-7], 2014, 2025), the PDF as T.REX ARMS hosts it: the sight on the standard mount (its Fig. 1), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The manual's configuration: the sight on the standard mount (its Fig. 1).
Published “Weight sight with integrated mount 139g, (4.9oz)”
Mile High Shooting, AimPoint 200198: Micro T-2 2MOA LRP (its table is the standard-mount listing's: its Article Number row says 200170), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
On the 200198 page, in a table whose Article Number row says 200170.
Published “Weight 3.7 oz. (105g) including mount, sight only 3.0 oz. (84g)”
Mile High Shooting, AimPoint 200198: Micro T-2 2MOA LRP (its table is the standard-mount listing's: its Article Number row says 200170), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The same page's prose; which mount isn't said.
The only figure the maker prints on this item's own sheet, and it says what it includes; the others are the standard configuration's or a seller's copy. It is kept as a floor, not as the LRP stack's weight: see the note.
sheet and manual differ by 0.18 oz beyond what each states it is good to.
sheet and mhs-table differ by 0.32 oz beyond what each states it is good to.
sheet and mhs-prose differ by 0.88 oz beyond what each states it is good to.
manual and mhs-table differ by 0.14 oz beyond what each states it is good to.
manual and mhs-prose differ by 1.06 oz beyond what each states it is good to.
mhs-table and mhs-prose differ by 1.2 oz beyond what each states it is good to.
No page on file weighs the sight on the LRP mount and the 39 mm spacer. The sheet printed for 200198 says 130 g for its "Conf", beside a configuration size (79 x 41 x 47 mm) that is the low standard mount's: the 130 g is probably that configuration's too, and this stack, with a spacer and a lever mount of aluminium under it, heavier. The manual's standard configuration is 135 g; Mile High's page for 200198 carries the standard listing's table (139 g "with integrated mount") and, in its prose, 105 g "including mount". A seller's weight for the 200198 stack itself is a gap.
Eye reliefNo value yetMissingNo source yet
None to state: the sheet says "Eye Relief: Unlimited" and the manual "Unlimited". A red dot: the part states no eye point.
Overall height (the LRP mount's bottom to the top of the turret housing, covers left out)2.739 in ± 0.03 in 69.6 mmProvisionalPhoto: Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised
Photo 2.739 in ± 0.03 in used
Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised, harvested
Scale: scale from aimpoint-micro-t-2.ring_span = 2.856 in (x-extent 1119 px → 391.8 px/in). Read by height of the traced outline (tools/trace.py); the LRP mount's lowest row to the top of the turret housing, the raised lids cut away
Not published for this stack (the sheet's 47 mm is the standard mount's): read off Aimpoint's left profile.
The sight's length over its lens-cover rings, covers raised2.856 in ± 0.03 in 72.5 mmProvisionalPhoto: GRITR Outdoors 839216: the sight on the standard mount (200170), straight left side on white, covers raised
Photo 2.856 in ± 0.03 in used
GRITR Outdoors 839216: the sight on the standard mount (200170), straight left side on white, covers raised, harvested
Scale: scale from aimpoint-micro-t-2.standard_conf_height = 1.85039 in (y-extent 865 px → 467.5 px/in). Read by width of the traced outline (tools/trace.py); the outline's length with the raised lids and their hinges cut away: the front cover ring's end to the rear one's
What the side views show: both covers raised, the rubber rings round the two ends of the tube. Between the bare sight's 68 mm and the 79 mm with the covers closed. It is read on the standard-mount photo (GRITR 839216, 200170), the one whose whole height the maker publishes: the sheet's 47 mm from that mount's bottom to the top of the turret housing. Checked on a rail: Scalarworks' side view of a T-2 on its LEAP mount (990c8c035f13) has a Picatinny rail under it whose lands and slots repeat at 89 px (a land from column 405 to 449 and a slot back to 360 on the left; a land from 803 to 846 and a slot to 892 on the right), 8.89 px/mm; the sight in it is 1.72 to 1.73 times smaller than in Aimpoint's left profile of 200198 (the turret housing's top to the lettering's foot, 296 px against 513; the cover rings' diameters), and that profile 1.193 to 1.196 times smaller than GRITR's photo (the length over the rings, 1119 px against 1334; the housing's top to the axis): 18.2 to 18.4 px/mm for GRITR's photo by the rail, 18.4 by the 47 mm. The manual's 48 mm would make it 18.0. And on this part's own photo the scale lands the maker's 36 mm of sight and 19 mm of spacer together within 0.4 mm (sight_height). This length scales Aimpoint's two profiles of the part.
Optical axis above the LRP mount's bottom1.927 in ± 0.022 in 48.9 mmProvisionalPhoto: Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised
Photo 1.927 in ± 0.022 in used
Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised, harvested
Scale: scale from aimpoint-micro-t-2.ring_span = 2.856 in (x-extent 1119 px → 391.8 px/in). Read by centre between the top (max over 0.0 in windows) along x [1.395, 1.435] of the traced outline (tools/trace.py); the front cover ring's rounded end is round about the axis: the middle of its top and bottom edges over the last 0.04 in of the outline, above the mount's lowest row
Read at the front cover ring's rounded end, which is round about the axis. The rear ring's end reads 1.941 in the same way, 0.014 in higher (the photo leans a third of a degree, or the rear ring's rim isn't quite round where its hinge was cut away): inside this reading's ±, and the difference stays in clamp_below_rail.
LRP mount's length along the rail (its base, without the lever's tip)2.036 in ± 0.023 in 51.7 mmProvisionalPhoto: Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised
Photo 2.036 in ± 0.023 in used
Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised, harvested
Scale: scale from aimpoint-micro-t-2.ring_span = 2.856 in (x-extent 1119 px → 391.8 px/in). Read by median row width in y [0.02, 0.035] (2.018–2.045) of the traced outline (tools/trace.py); the LRP base along its lowest rows, under the lever
Front lens-cover ring's outside diameter (the widest ring of the tube)1.218 in ± 0.025 in 30.9 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it: the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, 1600 x 1600, objective to the left, both covers raised
Photo 1.218 in ± 0.025 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it: the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, 1600 x 1600, objective to the left, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1119 px in this photo: 391.8 px/in. Read by the front ring's underside, rows 1003 to 1004 over columns 388 to 413, is 1.318 in above the mount's lowest row (1520) and 0.609 in below the axis (axis_above_clamp_bottom, 1.927 in): twice that
Twice the ring's underside below the axis: its top is under the front cover's hinge. The rear ring is smaller (its underside 0.51 in below the axis).
The round of the housing's shoulders (where its flanks turn over into its top)0.26 in ± 0.05 in 6.6 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it: the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, 1600 x 1600, objective to the left, both covers raised
Photo 0.26 in ± 0.05 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it: the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, 1600 x 1600, objective to the left, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1119 px in this photo: 391.8 px/in. Read by brightness down the left flank ahead of the turret housing (the three channels' mean over 13 columns) at columns 480, 560 and 640: even, 55 to 64, below rows 640, 664 and 624; falling steadily above them to about 30 by rows 592, 584 and 568; dark from there to the housing's top edge (rows 548, 544, 536). The flank is flat up to 92, 120 and 88 px under the top edge and turns over above that: 0.23, 0.31 and 0.22 in
Read from the shading, since no view along the sight is on file: a flat flank is one tone in a side view, and a round over it darkens toward the top. It says how high the flat of the flank reaches; that the round is a quarter circle of that size, as wide as it is high, is assumed.
The 39 mm spacer block's length (front face to rear face)1.922 in ± 0.022 in 48.8 mmProvisionalPhoto: Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised
Photo 1.922 in ± 0.022 in used
Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised, harvested
Scale: scale from aimpoint-micro-t-2.ring_span = 2.856 in (x-extent 1119 px → 391.8 px/in). Read by median row width in y [0.75, 1.15] (1.919–1.924) of the traced outline (tools/trace.py); the spacer block's front face to its rear face, the median over its rows
The sight's flat underside (the spacer's top) above the LRP mount's bottom1.338 in ± 0.03 in 34 mmProvisionalWorked out: {.base_top_above_clamp_bottom} + {.optical_axis_above_rail} - {.standard_axis_above_rail}
Worked out 1.338 in ± 0.03 in used
{.base_top_above_clamp_bottom} + {.optical_axis_above_rail} - {.standard_axis_above_rail}, harvested
The base's top on the photo, 0.590 in, and 19 mm.
Photo 1.336 in ± 0.03 in
Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised, harvested
Scale: scale from aimpoint-micro-t-2.ring_span = 2.856 in (x-extent 1119 px → 391.8 px/in). Read by the outline in the notch between the spacer's front face and the front cover ring's rear edge, 0.02 in ahead of the spacer. The housing's underside isn't flat there: it falls from 1.371 in at the spacer's face to 1.331 at the ring (the end of the pad the sight stands on), so this is a height on that slope, not the seam
The maker's two axis heights say how thick the spacer is; the photo's notch shows a slope and reads within 0.002 in of it at the point taken.
The seam between the sight and the spacer isn't seen in a side view (both are black, and the notch ahead of the spacer shows a slope). It is placed by the maker's own figures: the spacer adds 19 mm (39 mm with it, 20 without) over the LRP base's top, which the photo has. The maker's other figure agrees: its 36 mm of sight under the turret housing's top (2.739 in) puts the underside at 1.322 in, 0.4 mm lower.
The LRP base's top face (the spacer's foot) above the mount's bottom0.59 in ± 0.012 in 15 mmProvisionalPhoto: Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised
Photo 0.59 in ± 0.012 in used
Aimpoint's 200198_Micro_T-2_AR15_Ready_Profile_Left as Bravo Company shows it (10970): the sight on the 39 mm spacer and the LRP mount, straight left side, transparent ground, covers raised, harvested
Scale: scale from aimpoint-micro-t-2.ring_span = 2.856 in (x-extent 1119 px → 391.8 px/in). Read by y_max in x [-0.99, -0.97] in y [0.0, 0.9] of the traced outline (tools/trace.py); the LRP base's top face where it shows behind the spacer's rear face
How far the LRP mount reaches below the rail's top0.392 in ± 0.03 in 10 mmProvisionalWorked out: {.axis_above_clamp_bottom} - {.optical_axis_above_rail}
Worked out 0.392 in ± 0.03 in used
{.axis_above_clamp_bottom} - {.optical_axis_above_rail}, harvested
Nothing in a side view shows the rail's top inside the LRP base: it is where the sheet's 39 mm puts it under the tube's axis. That leaves 0.20 in (5 mm) of base over the rail and this much beside and under it, more than the catalog's other rail clamps reach (0.22 to 0.25 in); the low standard mount, read the same way on its own photo (the axis 1.06 in above its bottom, the sheet's 20 mm), reaches 0.27 in. One thing in the photos agrees with it: the socket in the base's right wall, a cross bolt's head at the middle of the base's length, is then centred 0.04 in below the rail's top (cross_bolt_below_axis), where a bolt lying in one of the rail's grooves would be.
LRP mount's bottom in the optic frame (y, the rail's top is 0)-0.392 in ± 0.03 in -10 mmProvisionalWorked out: -{.clamp_below_rail}
Worked out -0.392 in ± 0.03 in used
-{.clamp_below_rail}, harvested
Where the side profile's mount-bottom origin sits in the part frame.
The 39 mm spacer's height (what it adds under the sight)0.748 in ± 0.03 in 19 mmConfirmedWorked out: {.optical_axis_above_rail} - {.standard_axis_above_rail}
Worked out 0.748 in ± 0.03 in used
{.optical_axis_above_rail} - {.standard_axis_above_rail}, harvested
39 mm less 20 mm: 19 mm.
What the maker's two axis heights leave between them: 39 mm with the high spacer, 20 mm without. It places the sight's underside over the LRP base's top (underside_above_clamp_bottom), and the sight's own 36 mm then agrees with the photo within 0.4 mm (sight_height).
Intensity switch's diameter (its knurled ring, on the right side)1.082 in ± 0.02 in 27.5 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised
Photo 1.082 in ± 0.02 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1140 px in this photo (columns 240 to 1380): 399.2 px/in; the tube's axis is row 787 (the rings' widest rows, 775 to 800). Read by the switch is a circle in this view: columns 715 to 1147 at its middle, rows 598 to 1030: 432 px each way
Intensity switch's centre behind the front cover ring's end1.125 in ± 0.015 in 28.6 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised
Photo 1.125 in ± 0.015 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1140 px in this photo (columns 240 to 1380): 399.2 px/in; the tube's axis is row 787 (the rings' widest rows, 775 to 800). Read by the circle's centre, column 931, from the front ring's end, column 1380: 449 px
Intensity switch's centre below the optical axis0.068 in ± 0.015 in 1.7 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised
Photo 0.068 in ± 0.015 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1140 px in this photo (columns 240 to 1380): 399.2 px/in; the tube's axis is row 787 (the rings' widest rows, 775 to 800). Read by the circle's centre, row 814, below the axis's row 787: 27 px. Its lower edge (row 1030) hangs over the spacer's top
Windage adjustment cap's diameter (on the right side, behind the switch)0.541 in ± 0.02 in 13.7 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised
Photo 0.541 in ± 0.02 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1140 px in this photo (columns 240 to 1380): 399.2 px/in; the tube's axis is row 787 (the rings' widest rows, 775 to 800). Read by the knurled cap is a circle in this view, its front edge behind the switch: columns 476 to 692, rows 700 to 916: 216 px
Windage cap's centre behind the front cover ring's end1.994 in ± 0.015 in 50.6 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised
Photo 1.994 in ± 0.015 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1140 px in this photo (columns 240 to 1380): 399.2 px/in; the tube's axis is row 787 (the rings' widest rows, 775 to 800). Read by the cap's centre, column 584, from the front ring's end, column 1380: 796 px. The elevation turret stands over the same station (columns 515 to 668)
Windage cap's centre below the optical axis0.053 in ± 0.015 in 1.3 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised
Photo 0.053 in ± 0.015 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1140 px in this photo (columns 240 to 1380): 399.2 px/in; the tube's axis is row 787 (the rings' widest rows, 775 to 800). Read by the cap's centre, row 808, below the axis's row 787: 21 px
The LRP base's cross bolt (the socket in its right wall) behind the front cover ring's end1.478 in ± 0.015 in 37.5 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised
Photo 1.478 in ± 0.015 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1140 px in this photo (columns 240 to 1380): 399.2 px/in; the tube's axis is row 787 (the rings' widest rows, 775 to 800). Read by the socket's centre, column 790, from the front ring's end, column 1380: 590 px. The base's right wall runs from column 425 to 1172: the socket is at its middle
The LRP base's cross bolt below the optical axis1.573 in ± 0.015 in 40 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised
Photo 1.573 in ± 0.015 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1140 px in this photo (columns 240 to 1380): 399.2 px/in; the tube's axis is row 787 (the rings' widest rows, 775 to 800). Read by the socket's centre, row 1415, below the axis's row 787: 628 px
The socket's diameter in the LRP base's right wall0.175 in ± 0.015 in 4.4 mmProvisionalPhoto: Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised
Photo 0.175 in ± 0.015 in used
Aimpoint's own 200198_Micro_T-2_AR15_Ready_Profile_Right as Bravo Company shows it: straight right side, transparent ground, 1600 x 1600, objective to the right, both covers raised, harvested
Scale: the sight's length over its cover rings, ring_span (2.856 in), is 1140 px in this photo (columns 240 to 1380): 399.2 px/in; the tube's axis is row 787 (the rings' widest rows, 775 to 800). Read by the round recess with a hexagon socket in it: columns 755 to 825, 70 px
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Optic footprint
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline