Red dot mount
Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO)
The pedestal Holosun sells the ARO on: "an all-new 1.63" lower 1/3 co-witness pedestal mount" (its manual). A Micro-footprint dot screws to its deck (Holosun's EU shop, of it sold alone: "Footprint (upper): Aimpoint Micro", "compatible with HOLOSUN Micros ARO-CORE"); the ARO on it has its axis 1.63 in over the rail ("Central Mount Height 1.63"", Holosun's page), a lower 1/3 co-witness. Its clamp holds the rail by one cross bolt: "Apply forward pressure to the ARO and tighten the mounting clamp screw 30INCH/lbs." (the manual). The page linked is Holosun's EU shop's for it alone, priced in euros: no US seller on file sells it apart from the sight.

- Weight
- 1.73 oz Conflictworked out: {holosun-aro.mount_weight}Its sources span 1.53 oz to 1.73 oz.
- Lowest price
- Sold in the Holosun ARO 2 MOA red dot, on its 1.63 in lower 1/3 co-witness pedestal mount, not by itself
- Maker's number
- HS-MOUNT-AR-RISER-ARO
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- holosun.eu
In “22RB .22 LR rifle”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The deck's top (where a dot's base sits) above the rail's top0.728 in ± 0.03 in 18.5 mmProvisionalWorked out: {holosun-aro.optical_axis_above_rail} - {holosun-aro.axis_above_base}
Worked out 0.728 in ± 0.03 in used
{holosun-aro.optical_axis_above_rail} - {holosun-aro.axis_above_base}, harvested
1.63 in less the ARO's 0.902 in.
Holosun gives the mount's height only as the ARO's axis on it: "Central Mount Height 1.63"" (its page). Less the ARO's own axis over its base it is the deck's height; another Micro-footprint dot on it stands as much higher or lower as its own axis is over its base. The EU shop's "Size: 45x31x35 mm" for the mount sold alone isn't a height of it: 35 mm from the clamp's foot would put the deck 1.15 in over the rail and the ARO's axis at 2.05 in, and the older HS-MOUNT-AR-RISER for Holosun's 403, 503 and 515 is given the same 45x31x35 mm and 44 g.
The footprint's middle along the deck, ahead of the clamp's middle0.01 in ± 0.02 in 0.3 mmProvisionalWorked out: {holosun-aro.cross_bolt_x}
Worked out 0.01 in ± 0.02 in used
{holosun-aro.cross_bolt_x}, harvested
The stem stands over the cross bolt, and the deck on the stem (Holosun's pictures of the mount alone, and its manual's Fig 6, the four screws at the deck's corners about it); the housing's base, its underside's two ends (holosun-aro.skirt_bottom_rear_x, skirt_bottom_front_x), is centred 0.0075 in ahead of it. No view shows the screws' places along the rail: the footprint's middle is taken to be the stem's.
The clamp's length along the rail1.486 in ± 0.015 in 37.7 mmProvisionalWorked out: {holosun-aro.mount_length}
Worked out 1.486 in ± 0.015 in used
{holosun-aro.mount_length}, harvested
Read on Holosun's two side photos of the pair through their cameras, in the sight's ledger.
The clamp's bottom below the rail's top0.227 in ± 0.03 in 5.8 mmProvisionalWorked out: {holosun-aro.clamp_below_rail}
Worked out 0.227 in ± 0.03 in used
{holosun-aro.clamp_below_rail}, harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots