Handguard
Aero Precision AR15 12.7" R-ONE M-LOK handguard
Aero Precision's 12.7 in R-ONE free-float M-LOK handguard: 6061-T6, a full top Picatinny rail, QD sockets at 3, 6 and 9 o'clock, mounted by its own barrel nut on a standard upper's thread. "Compatible with mil-spec AR15 upper receivers and barrels"; "NOT Compatible with M4E1 Enhanced Upper Receivers".

- Weight
- 8 oz ± 0.5 oz Confirmedpublished: Aero Precision, AR15 12.7" R-ONE M-LOK Handguard, Specifications, the maker, read Nov 3, 2026
- Lowest price
- $215.00 at Aero Precision, read Nov 21, 2026 (Kodiak Brown Anodized)
- Maker's number
- APRA500704A
- Colours
- Anodized Black, OD Green Anodized, Kodiak Brown Anodized, FDE Cerakote
- Drawn as
- modelled
- Maker's page
- aeroprecisionusa.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision AR15 15" R-ONE M-LOK handguard.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length (the receiver's face to the end of the last rail slot)12.7 in ± 0.05 in 322.6 mmConfirmedPublished: Aero Precision, AR15 12.7" R-ONE M-LOK Handguard, Specifications, the maker, read Nov 3, 2026
Published “Handguard Length 12.7"” used
Aero Precision, AR15 12.7" R-ONE M-LOK Handguard, Specifications, the maker, read Nov 3, 2026 the page, harvested Nov 3, 2026
Aero: "Aero Precision rail lengths measure from end to end. This is the point of contact at the receiver to the end of the last picatinny slot at the muzzle."
Overall length, end to end12.998 in ± 0.03 in 330.1 mmCorroboratedPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 12.998 in ± 0.03 in used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by the silhouette end to end, 919 px
Photo 13 in ± 0.03 in
Aero's gallery: the R-ONE's right side, the check, 1000 x 630, harvested
Scale: its own rail teeth fitted to the same pitch. Read by the silhouette end to end
The left view, the one traced (the 15 in's was traced from the same view); the right view's reading is within its ±.
Slots in its top rail31CorroboratedPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 31 count used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by the gaps between the teeth along the whole rail, counted; they lie on the Picatinny pitch end to end within 0.02 in
Photo 31 count
Aero's gallery: the R-ONE's right side, the check, 1000 x 630, harvested
Scale: its own rail teeth fitted to the same pitch. Read by counted
Both views read the same; the left view's is the one traced (the 15 in's was traced from the same view).
Its rail's rearmost slot (its centre) ahead of the outline's rear end0.813 in ± 0.03 in 20.7 mmCorroboratedPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 0.813 in ± 0.03 in used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by the first gap between the teeth, its own centre (on the 15 in's view this reads 0.842 for that ledger's 0.855)
Photo 0.801 in ± 0.03 in
Aero's gallery: the R-ONE's right side, the check, 1000 x 630, harvested
Scale: its own rail teeth fitted to the same pitch. Read by the same
The left view, the one traced (the 15 in's was traced from the same view); the right view's reading is within its ±.
Its rail's front end (the end of the last slot) ahead of the outline's rear end12.97 in ± 0.02 in 329.4 mmProvisionalPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 12.97 in ± 0.02 in used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by the rail's top's last solid column ahead of its last slot
The QD sling socket on each side (3 and 9 o'clock), its centre ahead of the outline's rear end2.696 in ± 0.04 in 68.5 mmCorroboratedPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 2.696 in ± 0.04 in used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by the round hole behind the M-LOK row, what shows through both walls
Photo 2.69 in ± 0.04 in
Aero's gallery: the R-ONE's right side, the check, 1000 x 630, harvested
Scale: its own rail teeth fitted to the same pitch. Read by the same
The left view, the one traced (the 15 in's was traced from the same view); the right view's reading is within its ±.
How many M-LOK slots on each side6CorroboratedPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 6 count used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by counted: the full-length slots in the row at the bore's level
Photo 6 count
Aero's gallery: the R-ONE's right side, the check, 1000 x 630, harvested
Scale: its own rail teeth fitted to the same pitch. Read by counted
Both views read the same; the left view's is the one traced (the 15 in's was traced from the same view).
The rearmost M-LOK slot's centre on its sides, ahead of the handguard's rear end (its outline's x = 0)4.123 in ± 0.03 in 104.7 mmCorroboratedPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 4.123 in ± 0.03 in used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by the full-length slots' centres along their row, on the M-LOK pitch (std.mlok.slot_pitch) within 0.3%
Photo 4.124 in ± 0.03 in
Aero's gallery: the R-ONE's right side, the check, 1000 x 630, harvested
Scale: its own rail teeth fitted to the same pitch. Read by the same
The left view, the one traced (the 15 in's was traced from the same view); the right view's reading is within its ±.
The rearmost M-LOK slot's centre ahead of the receiver's face3.36 in ± 0.04 in 85.3 mmProvisionalWorked out: {.rear_x} + {.mlok_slot0_from_rear}
Worked out 3.36 in ± 0.04 in used
{.rear_x} + {.mlok_slot0_from_rear}, harvested
Thin slots in each row10CorroboratedPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 10 count used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by counted in each of the four rows
Photo 10 count
Aero's gallery: the R-ONE's right side, the check, 1000 x 630, harvested
Scale: its own rail teeth fitted to the same pitch. Read by counted
Both views read the same; the left view's is the one traced (the 15 in's was traced from the same view).
The thin slots' first centre ahead of the outline's rear end (all four rows)3.015 in ± 0.03 in 76.6 mmCorroboratedPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 3.015 in ± 0.03 in used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by the see-through slots' centres in the four rows fitted to one pitch
Photo 3.011 in ± 0.03 in
Aero's gallery: the R-ONE's right side, the check, 1000 x 630, harvested
Scale: its own rail teeth fitted to the same pitch. Read by the same
The left view, the one traced (the 15 in's was traced from the same view); the right view's reading is within its ±.
The thin slots' pitch1.038 in ± 0.005 in 26.4 mmProvisionalPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 1.038 in ± 0.005 in used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by their centres' spacing in the four rows
Each length's own: the slots are spread over its length (the 15 in's 1.0685, this one's the one read here).
A thin slot's length (at least: what shows through both walls)0.92 in ± 0.02 in 23.4 mmProvisionalPhoto: Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630
Photo 0.92 in ± 0.02 in used
Aero's gallery: the R-ONE's left side (its rear at the picture's right), mirrored, 1000 x 630, harvested
Scale: its top rail teeth fitted to the Picatinny pitch (std.picatinny.slot_pitch): 27.856 px a tooth, 70.70 px/in. Read by the longest see-through slot in the four rows
The handguard's rear end (its two side tabs' ends) against the receiver's front face (negative: behind it)-0.763 in ± 0.04 in -19.4 mmProvisionalWorked out: {aero-r-one-15-handguard.rear_x}
Worked out -0.763 in ± 0.04 in used
{aero-r-one-15-handguard.rear_x}, harvested
The clamp is the family's: the 15 in's place by reference. On this length's view the first tooth's rear face is 0.509 in ahead of the tabs' ends (the 15 in's, read the same way, 0.517); and Aero's length, back from the rail's end, puts the receiver's face 0.27 in ahead of them where the 15 in's puts it 0.318: within what a length stated to a tenth (0.05) and the two readings (0.02 each) carry.
Its rail's top above the bore (level with the receiver's)1.212 in ± 0.02 in 30.8 mmCorroboratedWorked out: {aero-r-one-15-handguard.rail_top_above_bore}
Worked out 1.2125 in ± 0.02 in used
{aero-r-one-15-handguard.rail_top_above_bore}, harvested
The R-ONE family: the 15 in's width1.5 in ± 0.05 in 38.1 mmConfirmedWorked out: {aero-r-one-15-handguard.width}
Worked out 1.5 in ± 0.05 in used
{aero-r-one-15-handguard.width}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's height1.95 in ± 0.005 in 49.5 mmProvisionalWorked out: {aero-r-one-15-handguard.height}
Worked out 1.95 in ± 0.005 in used
{aero-r-one-15-handguard.height}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's inside diameter1.3 in ± 0.05 in 33 mmConfirmedWorked out: {aero-r-one-15-handguard.inside_diameter}
Worked out 1.3 in ± 0.05 in used
{aero-r-one-15-handguard.inside_diameter}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's inside height1.65 in ± 0.005 in 41.9 mmProvisionalWorked out: {aero-r-one-15-handguard.inside_height}
Worked out 1.65 in ± 0.005 in used
{aero-r-one-15-handguard.inside_height}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's bottom flat width0.609 in ± 0.015 in 15.5 mmProvisionalWorked out: {aero-r-one-15-handguard.bottom_flat_width}
Worked out 0.609 in ± 0.015 in used
{aero-r-one-15-handguard.bottom_flat_width}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's side top width1.455 in ± 0.012 in 37 mmProvisionalWorked out: {aero-r-one-15-handguard.side_top_width}
Worked out 1.455 in ± 0.012 in used
{aero-r-one-15-handguard.side_top_width}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's lower edge width1.133 in ± 0.015 in 28.8 mmCorroboratedWorked out: {aero-r-one-15-handguard.lower_edge_width}
Worked out 1.133 in ± 0.015 in used
{aero-r-one-15-handguard.lower_edge_width}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's lower edge below rail top1.759 in ± 0.012 in 44.7 mmCorroboratedWorked out: {aero-r-one-15-handguard.lower_edge_below_rail_top}
Worked out 1.759 in ± 0.012 in used
{aero-r-one-15-handguard.lower_edge_below_rail_top}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's rail neck width0.62 in ± 0.015 in 15.7 mmProvisionalWorked out: {aero-r-one-15-handguard.rail_neck_width}
Worked out 0.62 in ± 0.015 in used
{aero-r-one-15-handguard.rail_neck_width}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's rail neck foot below rail top0.377 in ± 0.015 in 9.6 mmProvisionalWorked out: {aero-r-one-15-handguard.rail_neck_foot_below_rail_top}
Worked out 0.377 in ± 0.015 in used
{aero-r-one-15-handguard.rail_neck_foot_below_rail_top}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's rail centre gap0.365 in ± 0.02 in 9.3 mmProvisionalWorked out: {aero-r-one-15-handguard.rail_centre_gap}
Worked out 0.365 in ± 0.02 in used
{aero-r-one-15-handguard.rail_centre_gap}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's rail window length0.54 in ± 0.05 in 13.7 mmProvisionalWorked out: {aero-r-one-15-handguard.rail_window_length}
Worked out 0.54 in ± 0.05 in used
{aero-r-one-15-handguard.rail_window_length}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's rail bridge recess0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: {aero-r-one-15-handguard.rail_bridge_recess}
Worked out 0.03 in ± 0.015 in used
{aero-r-one-15-handguard.rail_bridge_recess}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's side flat top below rail top0.88 in ± 0.02 in 22.4 mmCorroboratedWorked out: {aero-r-one-15-handguard.side_flat_top_below_rail_top}
Worked out 0.88 in ± 0.02 in used
{aero-r-one-15-handguard.side_flat_top_below_rail_top}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's side flat bottom below rail top1.502 in ± 0.015 in 38.2 mmCorroboratedWorked out: {aero-r-one-15-handguard.side_flat_bottom_below_rail_top}
Worked out 1.502 in ± 0.015 in used
{aero-r-one-15-handguard.side_flat_bottom_below_rail_top}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's thin slot width0.22 in ± 0.04 in 5.6 mmProvisionalWorked out: {aero-r-one-15-handguard.thin_slot_width}
Worked out 0.22 in ± 0.04 in used
{aero-r-one-15-handguard.thin_slot_width}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's thin slot row a y0.71 in ± 0.02 in 18 mmProvisionalWorked out: {aero-r-one-15-handguard.thin_slot_row_a_y}
Worked out 0.71 in ± 0.02 in used
{aero-r-one-15-handguard.thin_slot_row_a_y}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's thin slot row b y0.46 in ± 0.02 in 11.7 mmCorroboratedWorked out: {aero-r-one-15-handguard.thin_slot_row_b_y}
Worked out 0.46 in ± 0.02 in used
{aero-r-one-15-handguard.thin_slot_row_b_y}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's thin slot row d y-0.41 in ± 0.02 in -10.4 mmCorroboratedWorked out: {aero-r-one-15-handguard.thin_slot_row_d_y}
Worked out -0.41 in ± 0.02 in used
{aero-r-one-15-handguard.thin_slot_row_d_y}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's thin slot row e y-0.635 in ± 0.02 in -16.1 mmCorroboratedWorked out: {aero-r-one-15-handguard.thin_slot_row_e_y}
Worked out -0.635 in ± 0.02 in used
{aero-r-one-15-handguard.thin_slot_row_e_y}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The R-ONE family: the 15 in's qd socket d0.37 in ± 0.03 in 9.4 mmProvisionalWorked out: {aero-r-one-15-handguard.qd_socket_d}
Worked out 0.37 in ± 0.03 in used
{aero-r-one-15-handguard.qd_socket_d}, harvested
The R-ONE's section and what is cut in it the same way at every length, by reference to the 15 in's ledger: Aero sells the R-ONE as one product in seven lengths (its configurable page) and its own pages give every length the one inside and outside diameter ("1.3\" Inside diameter", "1.5\" Outside diameter"). An assumption: no view of this length's end is on file. This length's side view agrees in height (2.14 to 2.15 in with the clamp, the 15 in's 2.13).
The room inside its side faces before the barrel, at the M-LOK slots (what an accessory's nuts may take)No value yetMissingNo source yet
Not read: as on the 15 in, it depends on the barrel under it.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Aero Precision $215.00 Kodiak Brown Anodized Nov 21, 2026, stock not said
- Aero Precision $215.00 OD Green Anodized Nov 21, 2026, stock not said
- Primary Arms $194.99 OD Green Anodized Nov 21, 2026, out of stock that day