Red dot mount
SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness
The mount SIG sells the ROMEO5 GEN II on: "M1913 I-BEAM Mount for situational awareness in all conditions" (SIG's manual). A Micro-footprint dot screws to its top plate; the ROMEO5 on it has its axis 1.41 in over the rail ("Sight to Optical Axis: 1.41”"), an absolute co-witness. Its base clamps to the rail by one cross bolt: "set the mount on the rail at your preferred eye relief, push the sight forward into the rail lugs and torque the T20 Torx bolt (E) to 65 in-lbs." The page linked is Primary Arms' for the pair: no page on file sells the mount alone.

- Weight
- 2.07 oz ± 0.21 oz Provisionalworked out: The model's volume: the I-BEAM 1.2796 cubic inches as aluminium (std.density.aluminium, 0.098 lb a cubic inch: 56.9 g) and the bolt and screws 0.0132 as steel (std.density.steel, 4.565 oz a cubic inch: 1.7 g), from pipeline/blender/sig_romeo5_gen_ii.py's manifest. The ± is a tenth: the web is lighter than drawn (the note).
- Lowest price
- Sold in the SIG Sauer ROMEO5 GEN II 1x20mm Compact Illuminated Dot Sight, 2 MOA red dot, on its M1913 I-BEAM mount, not by itself
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- primaryarms.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The top plate's top (where a dot's base sits) above the rail's top0.798 in ± 0.01 in 20.3 mmProvisionalWorked out: {sig-romeo5-gen-ii.optical_axis_above_rail} - {sig-romeo5-gen-ii.axis_above_base}
Worked out 0.798 in ± 0.01 in used
{sig-romeo5-gen-ii.optical_axis_above_rail} - {sig-romeo5-gen-ii.axis_above_base}, harvested
1.41 in less the ROMEO5's 0.612 in.
SIG gives the mount's height only as the ROMEO5's axis on it: "Sight to Optical Axis: 1.41” (Standard Models & Elite)" (the manual). Less the ROMEO5's own axis over its base it is the deck's height; another Micro-footprint dot on it stands as much higher or lower as its own axis is over its base.
The footprint's middle along the top plate, ahead of the base's middle0 in ± 0.01 in 0 mmProvisionalPhoto: SIG's operator's manual, page 2, rendered at 600 dpi and cropped: the dimensioned right side view and front view of the sight on its I-BEAM mount, and the view from below
Photo 0 in ± 0.01 in used
SIG's operator's manual, page 2, rendered at 600 dpi and cropped: the dimensioned right side view and front view of the sight on its I-BEAM mount, and the view from below, harvested
Scale: the side view at the scale of its A: 69.7 mm = 1149 px (532 to 1681), 418.7 px/in. Read by the top plate's two ends in the traced side view (profiles.side, feature plate: -0.994 and 0.994 in) about the base's, which the frame's origin is the middle of: the plate is as long as the base and over it. The four screws' heads under it are 1.39 in apart about the same middle (features screw_rear, screw_front): the footprint's middle
The I-BEAM's length along the rail (its base, and its top plate, which is as long)1.98 in ± 0.012 in 50.3 mmProvisionalWorked out: {sig-romeo5-gen-ii.mount_length}
Worked out 1.98 in ± 0.012 in used
{sig-romeo5-gen-ii.mount_length}, harvested
Read on the manual's side view of the pair, in the sight's ledger.
The I-BEAM base's foot below the rail's top0.235 in ± 0.012 in 6 mmProvisionalWorked out: {sig-romeo5-gen-ii.clamp_below_rail}
Worked out 0.235 in ± 0.012 in used
{sig-romeo5-gen-ii.clamp_below_rail}, harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots