Handguard
Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK
Geissele's 13.5 in free-float M-LOK handguard, with the barrel nut it mounts on. Sellers' pages: "Mounted to your AR-15 upper using the updated version of the proven Geissele Barrel Nut design"; "Anti-rotation tabs and set-screws ensure that your rail will not rotate"; "M1913 picatinny rail on top and M-LOK slots on every quadrant"; "precision machined using 7000 Series Aluminum" (Aerospace Arms; Brownells and Sportsman's Warehouse say 6061-T6), "Type 3 Hardcoat Anodize"; "this 13.5\" version pairs an extended barrel nut with seven sides of M-LOK" (Primary Arms). Its maker's own page isn't read (the site refuses the reader): the page linked is a seller's.

- Weight
- 14.9 oz ± 0.05 oz Corroboratedpublished: Aerospace Arms, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK - Black (05-650B), Features and Specifications, a seller, read Oct 6, 2026
- Lowest price
- $350.00 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- 05-650B
- Colours
- Black, Desert Dirt Color
- Drawn as
- modelled
- Maker's page
- aerospacearms.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision AR15 15" R-ONE M-LOK handguard.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Weight, the handguard alone13.4 oz ± 0.05 ozCorroboratedPublished: Aerospace Arms, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK - Black (05-650B), Features and Specifications, a seller, read Oct 6, 2026
Published “WEIGHT: 13.4oz (14.9oz w/ barrel nut)” used
Aerospace Arms, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK - Black (05-650B), Features and Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Weight 13.4 oz.”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 13.5" (05-650B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Weight 13.4 oz.”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 13.5" (05-650S, Desert Dirt Color), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “13.5" WEIGHT: 13.4oz (14.9oz w/ barrel nut)”
Brownells, GEISSELE AUTOMATICS LLC AR-15 MK16 SUPER MODULAR RAILS M-LOK, Specs (one page for the four lengths, a weight for each), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “13.4 oz. weight (14.9 oz. w/ barrel nut)”
Mister Guns, Geissele Automatics Super Modular Rail MK16 13.5" M-LOK Desert - 05-650S, description, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Weight: 13.4 oz”
TLO Outdoors, Geissele Automatics SMR MK16 13.5in M-LOK Free-Float Handguard Rail, Black 05-650B, Specs, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Six pages of five sellers state the one figure. The model's metal as aluminium weighs within a few percent of it (the part's approximations say what).
The same pair's first figure. Primary Arms and TLO Outdoors give it alone.
Length, end to end (its rear face to its muzzle end, the tabs behind the rear face left out)13.52 in ± 0.05 in 343.4 mmCorroboratedPhoto: Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Published “LENGTH: 13.5"”
Aerospace Arms, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK - Black (05-650B), Features and Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Handguard Length 13.5”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 13.5" (05-650B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Length: 13.5 in”
TLO Outdoors, Geissele Automatics SMR MK16 13.5in M-LOK Free-Float Handguard Rail, Black 05-650B, Specs, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 13.52 in ± 0.05 in used
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own top rail's 32 slots at the Picatinny pitch (std.picatinny.slot_pitch): a quadratic fit of their centres, 55.83 px a pitch at the muzzle end and 56.63 at the rear. Read by the rail's front end (px 105, its near edge: true column 118.0) to its rear end (px 2058: true column 2047.1): rail coordinates -1.74 and 32.57, 34.31 pitches; the lens stood over column 1170 and 34.3 in from the rifle's middle plane (the rail's notches narrow from 30.8 px there to 6.5 at the muzzle end and 10.6 at the rear, as its two edges part), so what stands z nearer the lens reads large about that column by 34.3 / (34.3 - z): 1.0237 on the side face, 1.0124 at the rail's near edge (scratch/m2.py)
Its own rail's 32 slots and two end lands count 13.52 in, which is what the model's rail and slots add up to; the sellers' 13.5 in agrees within its last digit.
The sellers' 13.5 in, and by its own rail it is that: 32 slots and a land at each end, 13.52 in. Its rail runs the whole length: on the level photo the rail's rear end and the body's rear face are one plane within 0.01 in once each is read at its own depth, and the rail's nose and the side faces' tips at the muzzle end within 0.02.
Width across the side faces (3 to 9 o'clock)1.59 in ± 0.005 in 40.4 mmCorroboratedPublished: Aerospace Arms, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK - Black (05-650B), Features and Specifications, a seller, read Oct 6, 2026
Published “OUTER DIAMETER (DAQ*): 1.59" [...] *DAQ - Distance Across Quadrants” used
Aerospace Arms, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK - Black (05-650B), Features and Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “OUTER DIAMETER (DAQ*): 1.59"”
Brownells, GEISSELE AUTOMATICS LLC AR-15 MK16 SUPER MODULAR RAILS M-LOK, Specs (one page for the four lengths, a weight for each), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Outer Diameter: 1.59 in”
TLO Outdoors, Geissele Automatics SMR MK16 13.5in M-LOK Free-Float Handguard Rail, Black 05-650B, Specs, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “1.26”/1.59” inner/outer diameter”
Mister Guns, Geissele Automatics Super Modular Rail MK16 13.5" M-LOK Desert - 05-650S, description, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Four sellers state the one figure.
The sellers' "OUTER DIAMETER (DAQ*)" with "*DAQ - Distance Across Quadrants": the distance across two opposite faces that carry M-LOK slots. It is the scale of the two views of its muzzle end.
Height (the rail's top to the bottom of the clamp block at its rear end)2.39 in ± 0.005 in 60.7 mmCorroboratedPublished: Aerospace Arms, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK - Black (05-650B), Features and Specifications, a seller, read Oct 6, 2026
Published “HEIGHT: 2.39"” used
Aerospace Arms, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK - Black (05-650B), Features and Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “HEIGHT: 2.39"”
Brownells, GEISSELE AUTOMATICS LLC AR-15 MK16 SUPER MODULAR RAILS M-LOK, Specs (one page for the four lengths, a weight for each), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Height: 2.39 in”
TLO Outdoors, Geissele Automatics SMR MK16 13.5in M-LOK Free-Float Handguard Rail, Black 05-650B, Specs, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “2.39” height”
Mister Guns, Geissele Automatics Super Modular Rail MK16 13.5" M-LOK Desert - 05-650S, description, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 2.41 in ± 0.03 in
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end (56.6 px a pitch, 143.7 px/in on the middle plane; 145.4 at the rail's near edge and 147.1 on the side face). Read by the rail's tooth tops (row 559.3) to the clamp block's bottom edge (row 911) at columns 1964 to 2004: 351.7 px, each half read at its own depth about the image's middle row (scratch/m2.py)
Four sellers state the one figure; the level photo reads it within 1% as the rail's top to the clamp block's bottom.
What the sellers' 2.39 in spans is read on the level photo, as on the 15 in rail's: the rail's top to the bottom of the clamp block under the rear end.
Inside diameter1.26 in ± 0.005 in 32 mmConflictPublished: Aerospace Arms, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK - Black (05-650B), Features and Specifications, a seller, read Oct 6, 2026
Published “INNER DIAMETER: 1.26"” used
Aerospace Arms, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK - Black (05-650B), Features and Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Inner Diameter 1.26 in.”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 13.5" (05-650S, Desert Dirt Color), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “INNER DIAMETER: 1.26"”
Brownells, GEISSELE AUTOMATICS LLC AR-15 MK16 SUPER MODULAR RAILS M-LOK, Specs (one page for the four lengths, a weight for each), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Inner Diameter: 1.26 in”
TLO Outdoors, Geissele Automatics SMR MK16 13.5in M-LOK Free-Float Handguard Rail, Black 05-650B, Specs, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “1.26”/1.59” inner/outer diameter”
Mister Guns, Geissele Automatics Super Modular Rail MK16 13.5" M-LOK Desert - 05-650S, description, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Inner Diameter 1.35 in.”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 13.5" (05-650B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Five pages state 1.26 in, Primary Arms' own page for the other colour among them; its page for the black rail is alone with 1.35, and a wall of 0.12 in is not what the view of the muzzle end shows.
aerospace-arms and primary-arms differ by 0.09 in beyond what each states it is good to.
primary-arms-ddc and primary-arms differ by 0.09 in beyond what each states it is good to.
brownells and primary-arms differ by 0.09 in beyond what each states it is good to.
tlo and primary-arms differ by 0.09 in beyond what each states it is good to.
mister-guns and primary-arms differ by 0.09 in beyond what each states it is good to.
Sellers' "INNER DIAMETER". Primary Arms' page for the black rail says 1.35 in, against 1.26 on its own page for the same rail in Desert Dirt Color and on every other page read: kept here, and not adopted. The model takes 1.26 as the circle its flat inner walls touch (the view of the muzzle end shows the side and lower walls 0.17 in thick: 1.59 less 1.26, halved, is 0.165).
Its rear face against the receiver's front face (negative: behind it)-0.445 in ± 0.04 in -11.3 mmConfirmedWorked out: 0in - {std.ar15.upper_barrel_thread_length}
Worked out -0.445 in ± 0.04 in used
0in - {std.ar15.upper_barrel_thread_length}, harvested
No page read says where it stops, and no photo of it mounted is on file. As the 15 in rail: it slides back over its barrel nut, and its rear face is taken to meet the receiver's front shoulder, where the barrel-nut thread begins (std.ar15.upper_barrel_thread_length behind the front face), with no gap. A check: its rail's first slot then stands 0.01 in from where the receiver's own row of slots would continue (bcm-m4-upper: 13 slots from 1.31 in at the standard's pitch).
Its lower tabs' reach behind its rear face0.26 in ± 0.02 in 6.6 mmProvisionalWorked out: {geissele-mk16-15-handguard.tab_length}
Worked out 0.26 in ± 0.02 in used
{geissele-mk16-15-handguard.tab_length}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). On this length's level photo the lower tab's end (px 2104) stands 0.25 in behind the rear face's edge (px 2068) at the side face's scale.
The outline's rear end (its lower tabs' ends) against the receiver's front face (negative: behind it)-0.705 in ± 0.05 in -17.9 mmProvisionalWorked out: {.rear_face_x} - {.tab_length}
Worked out -0.705 in ± 0.05 in used
{.rear_face_x} - {.tab_length}, harvested
Length over all, its lower tabs' ends to its muzzle end13.78 in ± 0.06 in 350 mmProvisionalWorked out: {.length} + {.tab_length}
Worked out 13.78 in ± 0.06 in used
{.length} + {.tab_length}, harvested
Its lower tabs' top edge below the bore axis0.27 in ± 0.02 in 6.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.tab_top_below_bore}
Worked out 0.27 in ± 0.02 in used
{geissele-mk16-15-handguard.tab_top_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). Rows 777 to 832 on this length's level photo, the 15 in rail's within 0.03.
Its lower tabs' bottom edge below the bore axis0.64 in ± 0.02 in 16.3 mmProvisionalWorked out: {geissele-mk16-15-handguard.tab_bottom_below_bore}
Worked out 0.64 in ± 0.02 in used
{geissele-mk16-15-handguard.tab_bottom_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
A tab's set screw, its diameter as it shows from the side0.14 in ± 0.03 in 3.6 mmProvisionalWorked out: {geissele-mk16-15-handguard.tab_screw_d}
Worked out 0.14 in ± 0.03 in used
{geissele-mk16-15-handguard.tab_screw_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). The screw's round end is 18 px across at px (2090, 815) on this length's level photo.
Its upper tabs' reach behind its rear face0.12 in ± 0.02 in 3 mmProvisionalWorked out: {geissele-mk16-15-handguard.tongue_length}
Worked out 0.12 in ± 0.02 in used
{geissele-mk16-15-handguard.tongue_length}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo reads 0.10 (px 2068 to 2082).
The opening between its two upper tabs0.638 in ± 0.03 in 16.2 mmCorroboratedWorked out: 2 * {bcm-m4-upper.side_half_width}
Worked out 0.638 in ± 0.03 in used
2 * {bcm-m4-upper.side_half_width}, harvested
As the 15 in rail's: not measured (no view shows it square on); the tabs stand beside a mil-spec receiver's flat sides under its rail and are drawn against those flats with no clearance. Aerospace Arms: "These handguards are designed to work with Mil-Spec M4 upper receivers. The compatibility with billet receiver sets is unknown."
Its upper tabs' bottom edge above the bore axis0.545 in ± 0.02 in 13.8 mmProvisionalWorked out: {geissele-mk16-15-handguard.tongue_bottom_above_bore}
Worked out 0.545 in ± 0.02 in used
{geissele-mk16-15-handguard.tongue_bottom_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
Its upper tabs' top edge above the bore axis0.727 in ± 0.02 in 18.5 mmProvisionalWorked out: {geissele-mk16-15-handguard.tongue_top_above_bore}
Worked out 0.727 in ± 0.02 in used
{geissele-mk16-15-handguard.tongue_top_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
Its rail's top above the bore axis1.2 in ± 0.02 in 30.5 mmCorroboratedWorked out: {geissele-mk16-15-handguard.rail_top_above_bore}
Worked out 1.2 in ± 0.02 in used
{geissele-mk16-15-handguard.rail_top_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo reads the rail's tooth tops 1.22 in above the middle of the side rows' slots (rows 560 and 739 at the muzzle end, 146 px/in), from a little above.
The tube's bottom flat below the bore axis0.86 in ± 0.02 in 21.8 mmProvisionalWorked out: {geissele-mk16-15-handguard.body_bottom_below_bore}
Worked out 0.86 in ± 0.02 in used
{geissele-mk16-15-handguard.body_bottom_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). The view of this length's muzzle end reads the bottom flat 0.86 in below the middle of the side faces (274.5 px at 319 px/in up and down).
The side faces' height (crease to crease)0.6 in ± 0.02 in 15.2 mmCorroboratedWorked out: {geissele-mk16-15-handguard.side_flat_height}
Worked out 0.6 in ± 0.02 in used
{geissele-mk16-15-handguard.side_flat_height}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). The view of this length's muzzle end reads 0.61 (the side faces' creases at rows 880 and 1075, 319 px/in up and down).
The faces between the sides and the rail: where their normal points, about the bore from the top (12 o'clock) toward the side45° ± 2°ProvisionalPhoto: Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464
Photo 45 deg ± 2 deg used
Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464, harvested
Scale: the view's own geometry: across the rifle it is true; up and down it is shortened by the cosine of the lens's height above the bore, 0.976 (the underside's slots, 40 mm apart, show 112 px apart where an inch across is 327 px: 12.6°). Read by the muzzle face's upper left arm, its outer edge from the side face's crease (px 1680, 880) to where it turns up into the neck (px 1808, 758): 128 px across, 122 up, 125 once the shortening is taken out: 44.4°; its upper stretch alone reads 45.4° (scratch/g_end_ddc_ul.png)
The 15 in rail's ledger takes these faces at 45° for want of a view square on an end; this length has one, and they are at 45°.
The faces between the sides and the bottom: where their normal points, about the bore from the top (12 o'clock) toward the side131.4° ± 1°CorroboratedPhoto: Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464
Photo 131.4 deg ± 1 deg used
Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464, harvested
Scale: the view's own geometry: across the rifle true, up and down shortened by 0.976 (upper_face_angle's scaleRef). Read by the muzzle face's lower outline, which is the silhouette there: its left edge from px (1688, 1084) to (1829, 1240) and its right from (2193, 1084) to (2051, 1240), 0.904 and 0.910 px across for each px down: 47.6° from the horizontal as it shows, 48.6° with the shortening taken out (scratch/m3.py)
Photo 131.5 deg ± 1 deg
Aerospace Arms' gallery for the 13.5 in black rail, mk16-blk-135-03-wide: its muzzle end seen from ahead and above, 3906 x 1464, harvested
Scale: the same. Read by the same edges on the black rail: px (1624, 1194) to (1777, 1362) and (2177, 1194) to (2023, 1362), 0.911 and 0.917 across for each px down: 48.5° (scratch/m3.py)
Two photos of two rails of this length agree within 0.1°; the Desert Dirt one shows its edges better.
Not 135°: the lower faces stand steeper than the upper ones, 48.6° from the horizontal, in both views of this length's muzzle end, and no height of lens could make a face at 45° read steeper than 45° (a lens above the bore shortens what stands up and down). The 15 in rail's ledger takes them at 45° for want of an end view; its bottom flat is the narrower for it (0.47 in against this length's 0.61).
The upper faces' distance from the bore axis, along their normal0.774 in ± 0.02 in 19.7 mmProvisionalWorked out: {.width} / 2 * sin({.upper_face_angle}) + {.side_flat_height} / 2 * cos({.upper_face_angle})
Worked out 0.774282 in ± 0.02 in used
{.width} / 2 * sin({.upper_face_angle}) + {.side_flat_height} / 2 * cos({.upper_face_angle}), harvested
Through the side faces' upper creases at the faces' angle.
The lower faces' distance from the bore axis, along their normal0.795 in ± 0.02 in 20.2 mmCorroboratedWorked out: {.width} / 2 * sin({.lower_face_angle}) - {.side_flat_height} / 2 * cos({.lower_face_angle})
Worked out 0.794732 in ± 0.02 in used
{.width} / 2 * sin({.lower_face_angle}) - {.side_flat_height} / 2 * cos({.lower_face_angle}), harvested
Through the side faces' lower creases at the faces' angle. As far as the side faces' own: the inside's 1.26 in circle leaves the lower walls as thick as the side walls, which is what the view of the muzzle end shows (0.17 in).
The bottom flat's width0.61 in ± 0.02 in 15.5 mmCorroboratedPhoto: Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464
Photo 0.61 in ± 0.02 in used
Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464, harvested
Scale: its width across the side faces (this ledger's width) over 520 px: 327 px/in across. Read by the muzzle face's bottom edge between the two lower faces' fitted lines at the bottom's row (px 1840 and 2040 at row 1252): 200 px (scratch/m3.py)
Photo 0.61 in ± 0.02 in
Aerospace Arms' gallery for the 13.5 in black rail, mk16-blk-135-03-wide: its muzzle end seen from ahead and above, 3906 x 1464, harvested
Scale: its width across the side faces over 580 px: 364.8 px/in across. Read by the same on the black rail: px 1788 and 2012 at row 1374, 224 px (scratch/m3.py)
The two photos read the same.
A check on lower_face_angle, not what the model draws from: lower faces at that angle from the side faces' creases down to the bottom leave a flat of 0.60 in.
Where the upper faces end and the neck under the rail begins, above the bore0.695 in ± 0.02 in 17.7 mmProvisionalWorked out: {geissele-mk16-15-handguard.neck_base_above_bore}
Worked out 0.695 in ± 0.02 in used
{geissele-mk16-15-handguard.neck_base_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). The view of this length's muzzle end reads 0.69 (the upper face's turn into the neck at row 758, the bore at 977.5).
The slope between the upper faces and the neck's walls, its height0.08 in ± 0.02 in 2 mmProvisionalWorked out: {geissele-mk16-15-handguard.neck_chamfer_height}
Worked out 0.08 in ± 0.02 in used
{geissele-mk16-15-handguard.neck_chamfer_height}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The neck's width under the rail0.61 in ± 0.04 in 15.5 mmProvisionalWorked out: {geissele-mk16-15-handguard.neck_width}
Worked out 0.61 in ± 0.04 in used
{geissele-mk16-15-handguard.neck_width}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). The view of this length's muzzle end reads 0.61 (the neck's outer walls at px 1840 and 2040, 327 px/in).
The channel under the rail (the gas tube's), its width0.47 in ± 0.04 in 11.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.channel_width}
Worked out 0.47 in ± 0.04 in used
{geissele-mk16-15-handguard.channel_width}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). The view of this length's muzzle end reads 0.45 (the opening under the rail from px 1862 to 2010).
The channel's roof below the rail's top0.18 in ± 0.03 in 4.6 mmProvisionalWorked out: {geissele-mk16-15-handguard.channel_roof_below_top}
Worked out 0.18 in ± 0.03 in used
{geissele-mk16-15-handguard.channel_roof_below_top}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The troughs along the inside of the bottom, the side faces and the upper faces: their width0.49 in ± 0.03 in 12.4 mmProvisionalPhoto: Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464
Photo 0.49 in ± 0.03 in used
Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464, harvested
Scale: its width across the side faces (this ledger's width) over 520 px: 327 px/in across. Read by the notch in the muzzle face's inner edge at the bottom, its two upright sides at px 1862 and 2022: 160 px on a 3x gridded crop (scratch/g_end_ddc_low.png)
Photo 0.48 in ± 0.03 in
Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464, harvested
Scale: its width across the side faces over 520 px, up and down shortened by 0.976: 319 px/in. Read by the left side wall's thin stretch at the muzzle face, rows 905 to 1058: 153 px (scratch/g_end_ddc_low.png)
The bottom's shows both its steps; the side wall's agrees within 0.01 in.
Inside, the walls are not one thickness: a flat-floored trough runs along the bottom's middle, with a step up at each side to the lower walls, and the underside's M-LOK slots are in its floor; the side walls' ends at the muzzle face are as thin over the same height, with a step where a side wall meets a lower one (Aerospace Arms' view from ahead and beside, 1b4421f8bedc); the upper walls' ends look as thin (0.09 to 0.10 in on a 5x crop, scratch/g_end_ddc_ul.png), and are drawn so at the bottom's width, which isn't read there; the lower walls' ends are about 0.15 in thick, and are drawn whole. Seen at the muzzle end; taken to run the length of the flat-walled inside.
The wall a trough's floor leaves, its thickness0.094 in ± 0.02 in 2.4 mmProvisionalPhoto: Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464
Photo 0.094 in ± 0.02 in used
Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464, harvested
Scale: its width across the side faces over 520 px, up and down shortened by 0.976: 319 px/in. Read by the muzzle face's bottom band at its middle, from the trough's floor (row 1222) to the bottom edge (row 1252): 30 px on a 3x gridded crop (scratch/g_end_ddc_low.png)
Photo 0.098 in ± 0.02 in
Aerospace Arms' gallery for the 13.5 in rail in Desert Dirt Color, mk16-ddc-135-03-wide: its muzzle end seen from ahead and about 12.6° above the bore, 3906 x 1464, harvested
Scale: its width across the side faces over 520 px: 327 px/in across. Read by the left side wall's end at the muzzle face, px 1680 to 1712: 32 px (scratch/g_end_ddc_low.png)
Read where the trough's two steps show; the side wall's end is the same within a pixel.
Slots in its top rail32ProvisionalPhoto: Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 32 count used
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the notches between the teeth along the top edge: 32, centres from px 214.8 to px 1958.2, each 54.8 to 57.2 px from the next with none missing; a longer tooth at each end (scratch/m2.py). Aerospace Arms' photo of its right side (6ab964c18436) has 29 notches in its silhouette and three more teeth ahead of them where its lens looks down on the rail: 32
Its rail's rearmost slot (its centre) ahead of its rear face0.62 in ± 0.02 in 15.7 mmProvisionalPhoto: Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.62 in ± 0.02 in used
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own top rail's 32 slots at the Picatinny pitch (std.picatinny.slot_pitch): a quadratic fit of their centres, 55.83 px a pitch at the muzzle end and 56.63 at the rear. Read by the rail's rear end (px 2058, its near edge: true column 2047.1, rail coordinate 32.57) behind the rearmost slot's centre (px 1958.2, coordinate 31): 1.57 pitches; the body's rear face (px 2068 on the side face: true column 2047.2) is the same plane (scratch/m2.py)
Its rail's rearmost slot (its centre) ahead of the receiver's front face0.175 in ± 0.045 in 4.4 mmProvisionalWorked out: {.rear_face_x} + {.rail_slot0_from_rear}
Worked out 0.175 in ± 0.045 in used
{.rear_face_x} + {.rail_slot0_from_rear}, harvested
Its rail's front end ahead of its last slot's centre0.685 in ± 0.02 in 17.4 mmProvisionalPhoto: Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.685 in ± 0.02 in used
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own top rail's 32 slots at the Picatinny pitch (std.picatinny.slot_pitch): a quadratic fit of their centres, 55.83 px a pitch at the muzzle end and 56.63 at the rear. Read by the rail's front end (px 105, its near edge: true column 118.0, rail coordinate -1.74) ahead of the frontmost slot's centre (px 214.8, coordinate 0): 1.74 pitches; the side faces' tips (px 95 on the side face: true column 119.9) are the same plane within 0.02 in (scratch/m2.py)
The rail's last tooth runs to the muzzle end and is sloped off at its top (rail_nose_length).
The slope at the rail's front end, its length along the rail0.29 in ± 0.02 in 7.4 mmProvisionalPhoto: Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.29 in ± 0.02 in used
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end, at the rail's near edge: 143.5 px/in. Read by the top edge leaves the tooth tops' level (row 560.2) at px 147 and reaches the front end at px 105: 42 px (scratch/m2.py)
The rail's top is sloped down to the muzzle end over its last quarter inch: a face of its own in Aerospace Arms' views from ahead (638b5d051a67, a4374faf412e).
The slope at the rail's front end, how far its front edge is below the rail's top0.11 in ± 0.02 in 2.8 mmProvisionalPhoto: Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.11 in ± 0.02 in used
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end, at the rail's near edge: 143.5 px/in. Read by the top edge at the front end (row 575.5 at px 107) below the tooth tops (row 560.2): 15.3 px, a pixel more at the very end (scratch/m2.py)
M-LOK slots on each side face (3 and 9 o'clock)7ProvisionalPhoto: Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 7 count used
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the middle row's slots, light showing through each: seven, 217 to 230 px apart (scratch/m2.py); seven on the right side in Aerospace Arms' photo of it (6ab964c18436) and seven on the left in its photo of that side (9ab6181ab578)
M-LOK slots on each lower face (between the sides and the bottom)7ProvisionalPhoto: Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 7 count used
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the lower row's slots, light showing through each: seven, their ends within 0.02 in of the side row's (rail coordinates -0.54 to 23.25 against -0.40 to 23.25 for their front ends) (scratch/m2.py); seven on each side in Aerospace Arms' two side photos
M-LOK slots on each upper face (between the sides and the rail)6ProvisionalPhoto: Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 6 count used
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the upper row's slots, light showing through each: six, each over one of the side row's front six (their rear ends at rail coordinates 2.04, 6.10, 10.15, 14.19 against the side row's 1.93, 6.04, 10.15, 14.23); six on each side in Aerospace Arms' two side photos (6ab964c18436, 9ab6181ab578)
One fewer than the side faces: where the rearmost would be, the upper face carries a sling swivel socket.
M-LOK slots on its underside (6 o'clock)7ProvisionalWorked out: {.mlok_side_slots}
Worked out 7 count used
{.mlok_side_slots}, harvested
The row is the sellers' sentence ("M-LOK slots on every quadrant", Aerospace Arms; "seven sides of M-LOK", Primary Arms) and, on this length, a photo's: Aerospace Arms' views into the muzzle end (a4374faf412e, 7ad0c578cf97) show the underside's foremost four slots from inside, in the trough's floor, at the side rows' pitch (112 px apart where 40 mm at that lens's height is 112) and with the foremost as far from the muzzle end as the side rows' (0.35 in against 0.34). How far back the row runs isn't seen: it is taken to have the side rows' seven, which is what fits ahead of the clamp block (mlok_bottom_slot0_x). Four are counted; seven is an assumption, not a count.
The underside's rearmost M-LOK slot (its centre) ahead of the receiver's front face2.655 in ± 0.06 in 67.4 mmProvisionalWorked out: {.mlok_side_slot0_x}
Worked out 2.655 in ± 0.06 in used
{.mlok_side_slot0_x}, harvested
Taken at the side rows' stations: the foremost four are seen there from inside the muzzle end (mlok_bottom_slots), the rear ones aren't seen. The clamp block and its split take the rear of the bottom; the side rows' rearmost slot begins 2.47 in ahead of the rear face, 0.1 in ahead of where the block's front ramp ends on the level photo (2.36), so the row can start there with all seven ahead of the block. An assumption for the rear three.
The side faces' rearmost M-LOK slot (its centre) ahead of the rear face3.1 in ± 0.04 in 78.7 mmProvisionalPhoto: Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 3.1 in ± 0.04 in used
Primary Arms' gallery for 05-650B, 05-650B_03.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own top rail's 32 slots at the Picatinny pitch (std.picatinny.slot_pitch): a quadratic fit of their centres, 55.83 px a pitch at the muzzle end and 56.63 at the rear; the lens stood over column 1170 and 34.3 in from the rifle's middle plane (the rail's notches narrow from 30.8 px there to 6.5 at the muzzle end and 10.6 at the rear, as its two edges part), so what stands z nearer the lens reads large about that column by 34.3 / (34.3 - z): 1.0237 on the side face, 1.0124 at the rail's near edge. Read by the side row's slots' own edges where they bound the light (the rear ends of the four ahead of the lens, the front ends of the two behind it), each brought to its true place: rail coordinates 2.283, 6.300, 10.309, 14.293 and 19.119, 23.105, 3.997 pitches apart within 0.02; the rearmost slot's rear end at 26.295 by both, 6.275 pitches (2.47 in) ahead of the rear face (32.57), its centre half a slot (std.mlok.slot_length) further (scratch/m2.py)
The 15 in rail's reads 3.08: the rows begin at the same place behind, and the shorter rail has one slot fewer ahead.
The side and lower faces' rearmost M-LOK slot (its centre) ahead of the receiver's front face2.655 in ± 0.06 in 67.4 mmProvisionalWorked out: {.rear_face_x} + {.mlok_side_slot0_from_rear}
Worked out 2.655 in ± 0.06 in used
{.rear_face_x} + {.mlok_side_slot0_from_rear}, harvested
The upper faces' rearmost M-LOK slot (its centre) ahead of the receiver's front face4.23 in ± 0.06 in 107.4 mmProvisionalWorked out: {.mlok_side_slot0_x} + {std.mlok.slot_pitch}
Worked out 4.229803 in ± 0.06 in used
{.mlok_side_slot0_x} + {std.mlok.slot_pitch}, harvested
One slot pitch ahead of the side faces' rearmost: the upper rows have the side rows' front six.
The upper rows of slots, their middle line above the bore0.51 in ± 0.02 in 13 mmProvisionalWorked out: {geissele-mk16-15-handguard.mlok_upper_row_above_bore}
Worked out 0.51 in ± 0.02 in used
{geissele-mk16-15-handguard.mlok_upper_row_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo reads the upper row's slots 0.51 in above the side row's (rows 665 and 739 at 146 px/in).
The lower rows of slots, their middle line below the bore0.565 in ± 0.02 in 14.4 mmProvisionalWorked out: {geissele-mk16-15-handguard.mlok_lower_row_below_bore}
Worked out 0.565 in ± 0.02 in used
{geissele-mk16-15-handguard.mlok_lower_row_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The room inside its faces, from a face in to the barrel (what an M-LOK accessory's nuts may take)No value yetMissingNo source yet
Not sourced: it depends on the barrel and gas block under it, other parts. Its side walls are 0.165 in by the sellers' two figures (1.59 across, 1.26 inside); the bottom's is 0.09 in the trough.
The sling swivel sockets (their centres) ahead of the rear face2.77 in ± 0.04 in 70.4 mmProvisionalWorked out: {geissele-mk16-15-handguard.socket_from_rear}
Worked out 2.77 in ± 0.04 in used
{geissele-mk16-15-handguard.socket_from_rear}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo has the cup's centre at px 1667, 2.75 in ahead of the rear face's edge at the upper face's scale.
The sling swivel sockets' centres above the bore0.585 in ± 0.02 in 14.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.socket_above_bore}
Worked out 0.585 in ± 0.02 in used
{geissele-mk16-15-handguard.socket_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
A sling swivel socket's cup, its outside diameter0.545 in ± 0.02 in 13.8 mmProvisionalWorked out: {geissele-mk16-15-handguard.socket_ring_d}
Worked out 0.545 in ± 0.02 in used
{geissele-mk16-15-handguard.socket_ring_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
A sling swivel socket's hole, its diameter0.31 in ± 0.03 in 7.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.socket_hole_d}
Worked out 0.31 in ± 0.03 in used
{geissele-mk16-15-handguard.socket_hole_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The front cross bolt (its centre) ahead of the rear face1.57 in ± 0.03 in 39.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_front_from_rear}
Worked out 1.57 in ± 0.03 in used
{geissele-mk16-15-handguard.cross_bolt_front_from_rear}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo has the plate's front hole at px (1838, 847): 1.575 in ahead of the rear face's edge (px 2068) at the side face's scale.
The rear cross bolt (its centre) ahead of the rear face0.55 in ± 0.03 in 14 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_rear_from_rear}
Worked out 0.55 in ± 0.03 in used
{geissele-mk16-15-handguard.cross_bolt_rear_from_rear}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo has the plate's rear hole at px (1987, 866): 0.555 in ahead of the rear face's edge.
The front cross bolt's centre below the bore0.745 in ± 0.02 in 18.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_front_below_bore}
Worked out 0.745 in ± 0.02 in used
{geissele-mk16-15-handguard.cross_bolt_front_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The rear cross bolt's centre below the bore0.835 in ± 0.02 in 21.2 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_rear_below_bore}
Worked out 0.835 in ± 0.02 in used
{geissele-mk16-15-handguard.cross_bolt_rear_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
A cross bolt's threaded hole in the left side's plate, its diameter0.21 in ± 0.02 in 5.3 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_hole_d}
Worked out 0.21 in ± 0.02 in used
{geissele-mk16-15-handguard.cross_bolt_hole_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
A cross bolt's Torx head on the right side, its diameter0.32 in ± 0.03 in 8.1 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_head_d}
Worked out 0.32 in ± 0.03 in used
{geissele-mk16-15-handguard.cross_bolt_head_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). Aerospace Arms' photo of this length's right side (6ab964c18436) shows the two Torx heads in their counterbores, 1.0 in apart.
A cross bolt's counterbore on the right side, its diameter0.46 in ± 0.03 in 11.7 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_counterbore_d}
Worked out 0.46 in ± 0.03 in used
{geissele-mk16-15-handguard.cross_bolt_counterbore_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The clamp block's split along its underside, its width0.51 in ± 0.05 in 13 mmProvisionalWorked out: {geissele-mk16-15-handguard.clamp_gap_width}
Worked out 0.51 in ± 0.05 in used
{geissele-mk16-15-handguard.clamp_gap_width}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The left side's nut plate, each end's width round its bolt hole0.52 in ± 0.03 in 13.2 mmProvisionalWorked out: {geissele-mk16-15-handguard.plate_lobe_d}
Worked out 0.52 in ± 0.03 in used
{geissele-mk16-15-handguard.plate_lobe_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The nut plate's bar between its two ends, its height0.2 in ± 0.03 in 5.1 mmProvisionalWorked out: {geissele-mk16-15-handguard.plate_bar_height}
Worked out 0.2 in ± 0.03 in used
{geissele-mk16-15-handguard.plate_bar_height}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $350.00 Black Nov 21, 2026, in stock that day
- Primary Arms $375.00 Desert Dirt Color Nov 21, 2026, in stock that day
- Aerospace Arms $375.00 Desert Dirt Color Nov 21, 2026, in stock that day
- Sportsman's Warehouse $228.92 Desert Dirt Color Nov 21, 2026, out of stock that day
- Aerospace Arms $350.00 Black Nov 21, 2026, out of stock that day
- Rifle Supply $350.99 Black Nov 21, 2026, out of stock that day