Optic
EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring
EOTECH's HWS EXPS3, a 1x holographic sight with a 1.20 x 0.85 in window under an aluminium hood, on its own quick-detach base: "Equipped with a 7mm raised quick-detach base for lower 1/3 iron sight co-witness", "Side buttons for easy adjustments with a magnifier", "Includes night vision compatible settings" (EOTECH's catalog). One CR123 battery, across the front. EXPS3-0 is the reticle EOTECH calls the 1-Dot Speed Ring: "68 MOA circle with quadrant ticks with 1 MOA aiming dot".

- Weight
- 11.2 oz Confirmedpublished: EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026
- Lowest price
- $611.25 at T.REX ARMS, read Nov 21, 2026 (Tan)
- Maker's number
- EXPS3-0
- Colours
- Black, Tan
- Drawn as
- modelled
- Maker's page
- eotechinc.com
In “Aero M4E1 Enhanced, pencil barrel”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (the battery compartment's front to the rear cover's screws)3.8 in 96.5 mmConflictPublished: EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026
Published “L × W × H 3.8" × 2.3" × 2.9" (96.5 × 58.4 × 73.7mm)” used
EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “L × W × H 3.8” × 2.3” × 2.9” / 96.5 × 58.4 × 73.7mm”
EOTECH, product catalog (2026), p. 12 EXPS3, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Dimensions 3.8" x 2.3" x 2.9" (96.5 x 58.4 x 73.7 mm)”
T.REX ARMS, EOTECH HWS EXPS3 Series, technical specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Dimensions 3.5in(L) x 2.4in(W) x 2.8in(H)”
Tactical Night Vision Company, EOTECH EXPS-3, specifications (an older set of figures), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The figures of the sight's first years (the 2010 review has 3.5 x 2.4 x 2.4): not the manual's of 2022.
EOTECH's own manual (2022) and catalog (2026) agree, and three straight side views have the manual's ratio of length to height (1.29 to 1.30 against 1.31); the 3.5 in on sellers' older pages is an earlier sheet's and stays a visible conflict.
manual and tnvc differ by 0.3 in beyond what each states it is good to.
catalog and tnvc differ by 0.3 in beyond what each states it is good to.
trex and tnvc differ by 0.3 in beyond what each states it is good to.
The straight side views' x-extent: the battery compartment's rounded front to the heads of the lower screws of the rear cover.
Overall width (the hood's left flank to the battery cap's face)2.3 in 58.4 mmConfirmedPublished: EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026
Published “L × W × H 3.8" × 2.3" × 2.9" (96.5 × 58.4 × 73.7mm)” used
EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “L × W × H 3.8” × 2.3” × 2.9” / 96.5 × 58.4 × 73.7mm”
EOTECH, product catalog (2026), p. 12 EXPS3, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Length: 3.8” Width: 2.3” Height: 2.9””
Primary Arms, EOTech EXPS3-0 holographic sight, tan (EXPS3-0TAN), description, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Dimensions 3.5in(L) x 2.4in(W) x 2.8in(H)”
Tactical Night Vision Company, EOTECH EXPS-3, specifications (an older set of figures), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The older set of figures.
EOTECH's own manual and catalog agree; the older set on TNVC's page stays a visible conflict.
EOTECH doesn't say what it spans. Its view from above, scaled by the published length, is 2.28 in from the hood's left flank to the battery cap's knurled face on the right, and 2.23 in across the hood alone (hood_width).
Overall height (the clamp's bottom to the hood's top)2.9 in 73.7 mmConfirmedPublished: EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026
Published “L × W × H 3.8" × 2.3" × 2.9" (96.5 × 58.4 × 73.7mm)” used
EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “L × W × H 3.8” × 2.3” × 2.9” / 96.5 × 58.4 × 73.7mm”
EOTECH, product catalog (2026), p. 12 EXPS3, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Dimensions 3.8" x 2.3" x 2.9" (96.5 x 58.4 x 73.7 mm)”
T.REX ARMS, EOTECH HWS EXPS3 Series, technical specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Dimensions 3.5in(L) x 2.4in(W) x 2.8in(H)”
Tactical Night Vision Company, EOTECH EXPS-3, specifications (an older set of figures), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The older set of figures.
EOTECH's own manual and catalog agree; the older set on TNVC's page stays a visible conflict.
From the bottom of the base's jaws, not the rail's top: the straight side views' y-extent between those two is 2.94 in at the published length's scale.
Window's width1.2 in ± 0.005 in 30.5 mmConfirmedPublished: EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026
Published “Window Dimensions 1.20" × 0.85" (30 × 23mm)” used
EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Window Dimensions 1.20in x 0.85in”
Tactical Night Vision Company, EOTECH EXPS-3, specifications (an older set of figures), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
EOTECH's own manual; the seller repeats it.
Window's height0.85 in 21.6 mmConfirmedPublished: EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026
Published “Window Dimensions 1.20" × 0.85" (30 × 23mm)” used
EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Window Dimensions 1.20in x 0.85in”
Tactical Night Vision Company, EOTECH EXPS-3, specifications (an older set of figures), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
EOTECH's own manual; the seller repeats it.
Front window's glass, thickness0.125 in 3.2 mmConfirmedPublished: EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026
Published “Front Window Material Glass 1/8" (3.17mm) thick” used
EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Rear window's laminate, thickness0.187 in 4.8 mmConfirmedPublished: EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026
Published “Rear Window Material Laminate 3/16" (4.76mm) thick” used
EOTECH, EXPS3 HWS user manual XE1974 Rev C (January 2022), p. 9 Specifications, the PDF on EOTECH's own shop, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The base's raise over EOTECH's earlier base (not a height over the rail)0.276 in 7 mmConfirmedPublished: EOTECH, product catalog (2026), p. 12 EXPS3, the maker, read Oct 6, 2026
Published “Equipped with a 7mm raised quick-detach base for lower 1/3 iron sight co-witness” used
EOTECH, product catalog (2026), p. 12 EXPS3, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “An integral quick-detach rail mount raises the sight by 7mm, providing the operator with a “lower 1/3 co-witness” sight height”
Tactical Night Vision Company, EOTECH EXPS-3, specifications (an older set of figures), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
EOTECH's own catalog; the seller says the same.
What EOTECH says of the sight's height, and all it says: the base is 7 mm higher than its other sights', for a lower 1/3 co-witness. It is not measured from the rail and nothing is drawn from it.
Hood's width across its two flanks2.262 in ± 0.03 in 57.5 mmProvisionalPhoto: EOTECH exps3_to: the black sight from above, 700 x 700 with its own alpha, the muzzle to the right
Photo 2.262 in ± 0.03 in used
EOTECH exps3_to: the black sight from above, 700 x 700 with its own alpha, the muzzle to the right, harvested
Scale: the published length, 3.8 in = 528 px (138.9 px/in), and width, 2.3 in = 317 px (137.8 px/in), which agree within 0.8%: 138.4 px/in. Read by the hood across its two flanks, seen from above: the outline's extent across the sight where the hood is, 0.3 to 2.6 in ahead of the rear cover's screws (tools/trace.py, `height` in that range): rows 195 to 508
The hood is the widest thing but the battery cap: the published width less the cap's stand past the right flank. The view from behind has it 960 px wide, which at the published height's scale (428.3 px/in) is 2.24 in: the two agree within 0.9%, and the view from behind is scaled by both.
Hood's thickness (its top, seen from behind)0.103 in ± 0.015 in 2.6 mmProvisionalPhoto: Primary Arms EXPS3-0_03: the black sight from behind, straight on, on white, 2200 x 1466
Photo 0.103 in ± 0.015 in used
Primary Arms EXPS3-0_03: the black sight from behind, straight on, on white, 2200 x 1466, harvested
Scale: the published height, 2.9 in = 1242 px (428.3 px/in), and the hood's width from the view above, 2.262 in = 960 px (424.4 px/in), which agree within 0.9%: 426.4 px/in. Read by the hood's top edge-on on the window's middle columns: dark from row 104.5 to row 148.5, the backdrop of the gap under it from 149: 44 px. Its rear edge is rounded and it is seen a little from below: it reads thick if anything
Battery cap, the teeth of its knurl41 ± 1ProvisionalPhoto: Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right
Photo 41 count ± 1 count used
Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right, harvested
Scale: none: a count. Read by the cap's rim unwrapped about its centre ((1753, 933) after a fit of the rim's radius took out the first guess's offset; a copy on file), the teeth counted as the rim's crossings of its own running mean: 12 over 5 to 112 degrees and 16 over 130 to 250 (8.5 to 9.0 degrees apart), 43 crossings over the whole turn of which the lanyard and its crimps split three and hide one: 41, give or take one
Battery cap, the depth of its knurl's teeth0.02 in ± 0.01 in 0.5 mmProvisionalPhoto: Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right
Photo 0.02 in ± 0.01 in used
Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right, harvested
Scale: the published length, 3.8 in = 1486 px (391.1 px/in), and height, 2.9 in = 1143 px (394.1 px/in), which agree within 0.8%: 392.6 px/in. Read by the unwrapped rim's radius from the teeth's roots to their tips: 163 to 172 px over the turn (its 10th and 90th percentiles), 8 px once the centre's residual is allowed for
Hood's top above the rail's top2.65 in ± 0.05 in 67.3 mmCorroboratedPhoto: EOTECH exps3_tanbr: the tan sight from behind, 700 x 700 with its own alpha
Photo 2.65 in ± 0.05 in used
EOTECH exps3_tanbr: the tan sight from behind, 700 x 700 with its own alpha, harvested
Scale: its own window, clear from edge to edge in this view: 166 px wide for the published 1.20 in (138.3 px/in) and 116.5 px high for the published 0.85 in (137.1 px/in), with the published height over the outline's 405 px (139.5 px/in; its lowest rows may be the ground's shadow): 138.5 px/in, to 1.5%. Read by on the window's middle columns: the hood's top edge at row 151.5, the roof of the notch in the rear cover (the cover's lower edge between the two jaws) at row 518.5: 367 px. A pixel is 0.007 in; ± covers the scale and both edges
Photo 2.578 in ± 0.03 in
Primary Arms EXPS3-0_03: the black sight from behind, straight on, on white, 2200 x 1466, harvested
Scale: the published height, 2.9 in = 1242 px (428.3 px/in), and the hood's width from the view above, 2.262 in = 960 px (424.4 px/in), which agree within 0.9%: 426.4 px/in. Read by on the window's middle columns (1100, 1150): the hood's top edge at row 104.5, the notch's roof in the older rear cover at row 1203.5 (1207 to 1208 at columns 1000, 1050 and 1200, where the roof's corners round): 1099 px
The older cover's notch: the least the height can be, not where the rail is.
Photo 2.68 in ± 0.08 in
Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right, harvested
Scale: the published length, 3.8 in = 1486 px (391.1 px/in), and height, 2.9 in = 1143 px (394.1 px/in), which agree within 0.8%: 392.6 px/in. Read by the hood's top (row 186) to the centre of the adjustment nut on the cross bolt's end (rows 1173 to 1303: 1238): 1052 px. The bolt's axis, not the rail's top: ± is the slot's depth less a bolt's radius either way
The lower of the two covers' notches (the rail is under both), and within a slot's depth of the cross bolt's axis; the older cover's notch stands 0.07 in clear of the rail.
No view on file has the sight on a rail. The rail lies in the notch in the rear cover's lower edge, so its top is no higher than the notch's roof: on the older cover in Primary Arms' photo (the one marked L3) that roof is 2.578 in below the hood's top, on the current cover in EOTECH's own picture 2.65 in, and the rail is under both. The cross bolt, which lies in a rail slot (the manual, p. 13), has its axis 2.68 in below the hood's top in the right side view: a bolt in a groove 0.118 in deep has its axis within that of the rail's top. A buyer's photo of the sight from the front (The Reptile House Blog, a copy on file) shows the base's own channel with the nut's centre level with its roof, within 0.04 in. And at 2.65 the base's jaws reach 0.26 in below the rail's top (the catalog's other clamps: 0.22 to 0.25), where at 2.578 they would reach 0.33 and the bolt would lie wholly under the slot's floor.
Lowest point (the quick-detach lever's underside) below the rail's top0.25 in ± 0.07 in 6.3 mmCorroboratedWorked out: {.height} - {.top_above_rail}
Worked out 0.25 in ± 0.07 in used
{.height} - {.top_above_rail}, harvested
The lever's latch hangs lowest, on the left; the jaws themselves end a few hundredths higher.
The published height is from the lowest point to the hood's top (the side views' and the view from behind's whole extent).
Window's centre below the hood's top0.791 in ± 0.02 in 20.1 mmCorroboratedPhoto: Primary Arms EXPS3-0_03: the black sight from behind, straight on, on white, 2200 x 1466
Photo 0.791 in ± 0.02 in used
Primary Arms EXPS3-0_03: the black sight from behind, straight on, on white, 2200 x 1466, harvested
Scale: the published height, 2.9 in = 1242 px (428.3 px/in), and the hood's width from the view above, 2.262 in = 960 px (424.4 px/in), which agree within 0.9%: 426.4 px/in. Read by on the window's middle columns: the hood's top edge at row 104.5; the window between the black of its frame's lips, rows 232 to 645 (centre 438.5), and its clear part, rows 288 to 602 (centre 445): the centre taken at row 442, 337.5 px down. This photo is taken from near enough that the opening's upper and lower walls show as black bands; ± covers which band is wall and which lip
Photo 0.792 in ± 0.02 in
EOTECH exps3_tanbr: the tan sight from behind, 700 x 700 with its own alpha, harvested
Scale: its own window, clear from edge to edge in this view: 166 px wide for the published 1.20 in (138.3 px/in) and 116.5 px high for the published 0.85 in (137.1 px/in), with the published height over the outline's 405 px (139.5 px/in; its lowest rows may be the ground's shadow): 138.5 px/in, to 1.5%. Read by the hood's top edge at row 151.5, the window's clear opening rows 203 to 319.5 (centre 261.25): 109.75 px
Three times the resolution; EOTECH's own picture of the tan sight, in which the whole window is clear, reads the same.
Hood's left flank from the rail's centre plane1.173 in ± 0.03 in 29.8 mmCorroboratedPhoto: Primary Arms EXPS3-0_03: the black sight from behind, straight on, on white, 2200 x 1466
Photo 1.173 in ± 0.03 in used
Primary Arms EXPS3-0_03: the black sight from behind, straight on, on white, 2200 x 1466, harvested
Scale: the published height, 2.9 in = 1242 px (428.3 px/in), and the hood's width from the view above, 2.262 in = 960 px (424.4 px/in), which agree within 0.9%: 426.4 px/in. Read by the outline's left extreme (column 614, the hood's left flank at its skirt) to the rail's centre taken at column 1114: 500 px. ± covers the centre's reading (8 px) and the scale
Photo 1.185 in ± 0.04 in
EOTECH exps3_to: the black sight from above, 700 x 700 with its own alpha, the muzzle to the right, harvested
Scale: the published length, 3.8 in = 528 px (138.9 px/in), and width, 2.3 in = 317 px (137.8 px/in), which agree within 0.8%: 138.4 px/in. Read by the hood's left flank (row 195) to the middle of the rear cover's two screw heads (rows 278 and 440: 359): 164 px
The view the rail's channel is seen in, at three times the resolution; the view from above agrees within 0.012 in.
The rail's centre is taken midway between the rear cover's two lower screws (columns 860 and 1365 in the view from behind: 1112.5) and the notch's roof (992 to 1253 at row 1210: 1122.5); the window's middle is column 1106. The hood isn't centred on the rail: its right flank is 1.07 in from it (457 px).
Hood's left flank in the frame (z, the rail's centre is 0)-1.173 in ± 0.03 in -29.8 mmCorroboratedWorked out: -{.hood_left_reach}
Worked out -1.173 in ± 0.03 in used
-{.hood_left_reach}, harvested
Where the view from above and the view from behind have their left edge.
Rear cover's screw heads (the sight's rear end) behind the cross bolt1.938 in ± 0.03 in 49.2 mmCorroboratedPhoto: Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right
Photo 1.938 in ± 0.03 in used
Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right, harvested
Scale: the published length, 3.8 in = 1486 px (391.1 px/in), and height, 2.9 in = 1143 px (394.1 px/in), which agree within 0.8%: 392.6 px/in. Read by the adjustment nut on the cross bolt's right end, a circle whose box is columns 1170 to 1300 (centre 1235), from the outline's rear extreme (column 475): 760 px. ± covers the nut's centre (5 px) and the scale
Photo 1.954 in ± 0.04 in
Primary Arms EXPS3-0_05: the black sight's left side straight on, on white, 2200 x 1467, the muzzle to the left, harvested
Scale: the published length, 3.8 in = 1579 px (415.5 px/in), and height, 2.9 in = 1221 px (421.0 px/in), which agree within 1.3%: 418.3 px/in. Read by the quick-detach lever's cam, on the bolt's other end, columns 960 to 1110 (centre 1035), from the outline's rear extreme (column 1852): 817 px. The cam isn't round: its middle is only near the bolt's axis
The nut is on the bolt itself and is round; the cam on the left end agrees within 0.016 in.
The sight's rear end in the frame (x, the cross bolt is 0)-1.938 in ± 0.03 in -49.2 mmCorroboratedWorked out: -{.rear_behind_bolt}
Worked out -1.938 in ± 0.03 in used
-{.rear_behind_bolt}, harvested
Where the side views and the view from above have their rear edge.
Base's reach behind the cross bolt (to the rear foot's rear end)1.77 in ± 0.03 in 45 mmCorroboratedPhoto: Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right
Photo 1.77 in ± 0.03 in used
Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right, harvested
Scale: the published length, 3.8 in = 1486 px (391.1 px/in), and height, 2.9 in = 1143 px (394.1 px/in), which agree within 0.8%: 392.6 px/in. Read by the nut's centre (column 1235) back to the rear end of the base's rear foot (column 540): 695 px
Photo 1.788 in ± 0.04 in
Primary Arms EXPS3-0_05: the black sight's left side straight on, on white, 2200 x 1467, the muzzle to the left, harvested
Scale: the published length, 3.8 in = 1579 px (415.5 px/in), and height, 2.9 in = 1221 px (421.0 px/in), which agree within 1.3%: 418.3 px/in. Read by the cam's middle (column 1035) to the base's rear end (column 1790, under the rear cover's screws): 748 px less the 0.016 in the cam's middle reads behind the nut
Measured from the nut itself; the left view agrees within 0.02 in.
Base's reach ahead of the cross bolt (to the clamp block's front end)0.93 in ± 0.03 in 23.6 mmCorroboratedPhoto: Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right
Photo 0.93 in ± 0.03 in used
Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right, harvested
Scale: the published length, 3.8 in = 1486 px (391.1 px/in), and height, 2.9 in = 1143 px (394.1 px/in), which agree within 0.8%: 392.6 px/in. Read by the nut's centre (column 1235) forward to the clamp block's front end (column 1600): 365 px
Photo 0.913 in ± 0.04 in
Primary Arms EXPS3-0_05: the black sight's left side straight on, on white, 2200 x 1467, the muzzle to the left, harvested
Scale: the published length, 3.8 in = 1579 px (415.5 px/in), and height, 2.9 in = 1221 px (421.0 px/in), which agree within 1.3%: 418.3 px/in. Read by the base's front end (the lever's tip, column 661) to the cam's middle (column 1035): 374 px, plus the 0.016 in the cam's middle reads behind the nut
Measured from the nut itself; the left view agrees within 0.02 in.
Window's centre above the rail's top (EOTECH states no height of the reticle)1.859 in ± 0.06 in 47.2 mmCorroboratedWorked out: {.top_above_rail} - {.window_centre_below_top}
Worked out 1.859 in ± 0.06 in used
{.top_above_rail} - {.window_centre_below_top}, harvested
The hood's top over the rail less the window's centre under the hood's top, which two photos read alike.
No page or document on file states it: EOTECH says "7mm raised quick-detach base for lower 1/3 iron sight co-witness" and T.REX ARMS "Optic Height Lower 1/3rd co-witness". A hologram's reticle has no axis of its own in the window; the sight line is taken through the window's centre. It is as good as the rail's top is known under the sight (top_above_rail: no view on file has it on a rail): with the older cover's notch taken for the rail's top it would be 1.79 in. At 1.86 in an AR's own sights (1.4 in over the rail) come up at the window's lower edge, lower than "lower 1/3" suggests: a figure from EOTECH, or a straight view of the sight on a rail, would settle it. The 1.74 in a review gives is the EXPS3 HD's, another sight; a riser's 2.26 in isn't this sight's.
Base's length along the rail (the rear foot's rear end to the clamp block's front end)2.7 in ± 0.03 in 68.6 mmCorroboratedPhoto: Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right
Photo 2.7 in ± 0.03 in used
Primary Arms EXPS3-0TAN_01: the tan sight's right side straight on, on white, 2200 x 1467, the muzzle to the right, harvested
Scale: the published length, 3.8 in = 1486 px (391.1 px/in), and height, 2.9 in = 1143 px (394.1 px/in), which agree within 0.8%: 392.6 px/in. Read by the base's rear foot's rear end (column 540) to the clamp block's front end (column 1600): 1060 px
Photo 2.699 in ± 0.03 in
Primary Arms EXPS3-0_05: the black sight's left side straight on, on white, 2200 x 1467, the muzzle to the left, harvested
Scale: the published length, 3.8 in = 1579 px (415.5 px/in), and height, 2.9 in = 1221 px (421.0 px/in), which agree within 1.3%: 418.3 px/in. Read by the base's front end (column 661) to its rear end (column 1790): 1129 px
Published “features a shortened base that only requires about 2.75″ of rail space”
Tactical Night Vision Company, EOTECH EXPS-3, specifications (an older set of figures), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
"About": ± 0.05 written for it.
Published “Shortened base only requires at most 2 3/4 inch of rail space compared to the 4 inch N battery sights”
Combat Optics Reviews, Eotech EXPS3-0 (2010), the maker's figures of that year, a review, read Oct 6, 2026 the page, harvested Oct 6, 2026
"At most", of the 2010 sight: ± 0.05 written for it.
Two straight side views, one of each flank, read 2.70 in; the two old sentences round it up as the rail it needs.
EOTECH's current pages state none. The two old sentences (the 2010 review's and TNVC's, both of the sight's first years) say how much rail it needs, which is what the two side views read.
Window's corner radius0.18 in ± 0.03 in 4.6 mmProvisionalPhoto: Primary Arms EXPS3-0_03: the black sight from behind, straight on, on white, 2200 x 1466
Photo 0.18 in ± 0.03 in used
Primary Arms EXPS3-0_03: the black sight from behind, straight on, on white, 2200 x 1466, harvested
Scale: the published height, 2.9 in = 1242 px (428.3 px/in), and the hood's width from the view above, 2.262 in = 960 px (424.4 px/in), which agree within 0.9%: 426.4 px/in. Read by the opening's lower corners: its clear width is 914 to 1287 at row 598, 898 to 1311 at row 588 and 876 to 1337 at row 560 against 867 to 1345 at its middle and a lower edge at row 602: an arc of about 75 px
Main tube ODNo value yetMissingNo source yet
A holographic sight has no tube: its window is a rectangle in a housing (window_width, window_height). Not applicable; kept as the checklist's entry.
Eye reliefNo value yetMissingNo source yet
EOTECH's manual, p. 9: "Eye Relief Unlimited". It has no eye point of its own and the part states no `eye`.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Sight and magnifier
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- T.REX ARMS $611.25 Tan Nov 21, 2026, in stock that day
- Primary Arms $815.00 Black Nov 21, 2026, in stock that day
- MidwayUSA $815.00 Black Nov 21, 2026, in stock that day
- Primary Arms $815.00 Tan Nov 21, 2026, in stock that day
- Scheels $815.00 Black Oct 6, 2026, in stock that day
- T.REX ARMS $652.00 Black Nov 21, 2026, out of stock that day
- Right To Bear $815.00 Black Nov 21, 2026, out of stock that day
- Right To Bear $819.00 Tan Nov 21, 2026, out of stock that day