Handguard
Geissele Automatics 15" Super Modular Rail MK16 M-LOK
Geissele's 15 in free-float M-LOK handguard, with the barrel nut it mounts on. Sellers' pages: "Mounted to your AR-15 upper using the updated version of the proven Geissele Barrel Nut design"; "Anti-rotation tabs and set-screws ensure that your rail will not rotate"; "M1913 picatinny rail on top and M-LOK slots on every quadrant"; "precision machined using 7000 Series Aluminum" (Mile High Shooting; two other sellers say 6061-T6), "Type 3 Hardcoat Anodize". Its maker's own page isn't read (the site refuses the reader): the page linked is a seller's.

- Weight
- 17.1 oz ± 0.05 oz Conflictpublished: Mile High Shooting Accessories, Geissele: 15" Super Modular Rail MK16 M-LOK (05-792B), Specifications, a seller, read Oct 6, 2026Its sources span 15.75 oz to 17.15 oz.
- Lowest price
- $301.77 at GRITR Sports, read Nov 21, 2026 (Black)
- Maker's number
- 05-792B
- Colours
- Black, Desert Dirt Color
- Drawn as
- modelled
- Maker's page
- milehighshooting.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision AR15 15" R-ONE M-LOK handguard.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Weight, the handguard alone15.6 oz ± 0.05 ozConflictPublished: Mile High Shooting Accessories, Geissele: 15" Super Modular Rail MK16 M-LOK (05-792B), Specifications, a seller, read Oct 6, 2026
Published “WEIGHT: 15.6oz (17.1oz w/ barrel nut)” used
Mile High Shooting Accessories, Geissele: 15" Super Modular Rail MK16 M-LOK (05-792B), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Weight for 15": 15.6oz (17.1oz with barrel nut)”
Bullet Central, Geissele Automatics - 15" Super Modular Rail MK16 M-LOK, Black, Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “SMR MK16 15" WEIGHT: 14.2oz (15.8oz w/ barrel nut)”
Charlie's Custom Clones, Geissele 15" MK16 Super Modular Rail M-LOK - Black (05-792B), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “SMR MK16 15″ Weight 14.2oz (15.8oz w/ barrel nut)”
Kenzie's Optics, Geissele MK16 Super Modular Rail M-LOK - Desert Dirt, Specifications (a table of the four lengths), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Weight 14.2 oz”
AR15Discounts, Geissele Automatics MK16 M-LOK AR-15 Super Modular Rail, Additional information (one figure for four lengths), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The pair adopted for the weight on the rifle. The model's metal weighs between the two figures (the part's approximations say what).
mile-high and charlies differ by 1.4 oz beyond what each states it is good to.
mile-high and kenzies differ by 1.4 oz beyond what each states it is good to.
mile-high and ar15discounts differ by 1.4 oz beyond what each states it is good to.
bullet-central and charlies differ by 1.4 oz beyond what each states it is good to.
bullet-central and kenzies differ by 1.4 oz beyond what each states it is good to.
bullet-central and ar15discounts differ by 1.4 oz beyond what each states it is good to.
The same two pairs. AR15Discounts gives 14.2 oz as one figure on a page for all four lengths.
Length, end to end (its rear face to its muzzle end, the tabs behind the rear face left out)15.12 in ± 0.05 in 384 mmCorroboratedPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Published “LENGTH: 15"”
Mile High Shooting Accessories, Geissele: 15" Super Modular Rail MK16 M-LOK (05-792B), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Handguard Length 15”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 15" (05-792B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 15.12 in ± 0.05 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own top rail's 36 slots at the Picatinny pitch (std.picatinny.slot_pitch). Read by the rail's top from its front end (px 114) to its rear end (px 2066): 35 pitches between the end slots' centres (px 198 and 1977.5), 84 px ahead of the first at 49.9 px a pitch and 88.5 px behind the last at 52.0: 38.39 pitches. A second fit of the same slots reads 38.27 (15.08 in): the ± (scratch/m2.py, m6.py)
The sellers' figure is the size's name, good to half an inch; its own rail's slots count 15.12 in, inside that.
The sellers' 15 in is its size in whole inches. Its rail runs the whole length (the rail's ends and the body's stand within 0.06 in of each other at both ends on the level photo), and by its own slots it is 15.12 in.
Width across the side faces (3 to 9 o'clock)1.59 in ± 0.005 in 40.4 mmCorroboratedPublished: Mile High Shooting Accessories, Geissele: 15" Super Modular Rail MK16 M-LOK (05-792B), Specifications, a seller, read Oct 6, 2026
Published “OUTER DIAMETER (DAQ*): 1.59" [...] *DAQ - Distance Across Quadrants” used
Mile High Shooting Accessories, Geissele: 15" Super Modular Rail MK16 M-LOK (05-792B), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “OUTER DIAMETER (DAQ*): 1.59"”
Charlie's Custom Clones, Geissele 15" MK16 Super Modular Rail M-LOK - Black (05-792B), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Outer Diameter (DAQ*): 1.59"”
Bullet Central, Geissele Automatics - 15" Super Modular Rail MK16 M-LOK, Black, Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Three sellers state the one figure.
The sellers' "OUTER DIAMETER (DAQ*)" with "*DAQ - Distance Across Quadrants": the distance across two opposite faces that carry M-LOK slots. Kenzie's Optics' view from the rear end reads 1.61 across the side faces when its rail is taken at the standard's 0.835 (105.8 px against 55): the same figure within the photo's 3%.
Height (the rail's top to the bottom of the clamp block at its rear end)2.39 in ± 0.005 in 60.7 mmCorroboratedPublished: Mile High Shooting Accessories, Geissele: 15" Super Modular Rail MK16 M-LOK (05-792B), Specifications, a seller, read Oct 6, 2026
Published “HEIGHT: 2.39"” used
Mile High Shooting Accessories, Geissele: 15" Super Modular Rail MK16 M-LOK (05-792B), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “HEIGHT: 2.39"”
Charlie's Custom Clones, Geissele 15" MK16 Super Modular Rail M-LOK - Black (05-792B), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Height 2.39in”
GritrSports, GEISSELE AUTOMATICS 15" Super Modular Rail Mk16 M-Lok (05-792B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 2.37 in ± 0.03 in
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots beside the column read: 52.0 px a pitch at the rear end, 131.9 px/in. Read by the rail's top (row 567.5) to the clamp block's bottom edge (row 880.5) at column 2000: 313 px (scratch/m1.py, m2.py)
Three sellers state the one figure; the level photo reads it within 1% as the rail's top to the clamp block's bottom.
What the sellers' 2.39 in spans is read on the level photo: the rail's top to the bottom of the clamp block under the rear end is 2.37 in there; the rail's top to the bottom of the tube itself is 2.06 (body_bottom_below_bore).
Inside diameter1.26 in ± 0.005 in 32 mmCorroboratedPublished: Mile High Shooting Accessories, Geissele: 15" Super Modular Rail MK16 M-LOK (05-792B), Specifications, a seller, read Oct 6, 2026
Published “INNER DIAMETER: 1.26"” used
Mile High Shooting Accessories, Geissele: 15" Super Modular Rail MK16 M-LOK (05-792B), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Inner Diameter 1.26”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 15" (05-792B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Inner Diameter: 1.26"”
Bullet Central, Geissele Automatics - 15" Super Modular Rail MK16 M-LOK, Black, Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Three sellers state the one figure.
Sellers' "INNER DIAMETER". Its rear end is a round bore over the barrel nut (Kenzie's Optics' view from the rear); ahead of it the inside has flat walls that follow the outside (Bullet Central's and Primary Arms' views of the muzzle end), and the model takes this figure as the circle those inner walls touch. Primary Arms' page for the 13.5 in rail says 1.35 in once, against 1.26 on its pages for this one and the 10.5 in.
Its rear face against the receiver's front face (negative: behind it)-0.445 in ± 0.04 in -11.3 mmConfirmedWorked out: 0in - {std.ar15.upper_barrel_thread_length}
Worked out -0.445 in ± 0.04 in used
0in - {std.ar15.upper_barrel_thread_length}, harvested
No page read says where it stops, and no photo of it mounted is on file. It slides back over its barrel nut; its rear face is taken to meet the receiver's front shoulder, where the barrel-nut thread begins (std.ar15.upper_barrel_thread_length behind the front face), with no gap. A check: its rail's first slot then stands 0.04 in ahead of where the receiver's own row of slots would continue (bcm-m4-upper: 13 slots from 1.31 in at the standard's pitch), inside what the two readings allow.
Its lower tabs' reach behind its rear face0.26 in ± 0.02 in 6.6 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.26 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end (52.0 px a pitch), 1.5% more on the near side face: 133 px/in. Read by the tab's rear end (px 2107) behind the rear face's edge (px 2072.5) on a gridded crop (scratch/grid2.py)
A tab on each side behind the clamp block, each with a set screw through it across the rifle (sellers: "Anti-rotation tabs and set-screws ensure that your rail will not rotate"). They lie along the receiver's sides.
The outline's rear end (its lower tabs' ends) against the receiver's front face (negative: behind it)-0.705 in ± 0.05 in -17.9 mmProvisionalWorked out: {.rear_face_x} - {.tab_length}
Worked out -0.705 in ± 0.05 in used
{.rear_face_x} - {.tab_length}, harvested
Length over all, its lower tabs' ends to its muzzle end15.38 in ± 0.06 in 390.7 mmProvisionalWorked out: {.length} + {.tab_length}
Worked out 15.38 in ± 0.06 in used
{.length} + {.tab_length}, harvested
Its lower tabs' top edge below the bore axis0.27 in ± 0.02 in 6.9 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.27 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 132 px/in. Read by the tab's top edge (row 760) below the side faces' middle line (row 724.3 there) on a gridded crop (scratch/grid2.py)
Its lower tabs' bottom edge below the bore axis0.64 in ± 0.02 in 16.3 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.64 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 132 px/in. Read by the tab's bottom edge (row 808) below the side faces' middle line (row 724.3 there) on a gridded crop (scratch/grid2.py)
A tab's set screw, its diameter as it shows from the side0.14 in ± 0.03 in 3.6 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.14 in ± 0.03 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 132 px/in. Read by the screw's dark round end in the tab, 18 to 19 px across, its centre at px (2090.7, 788): 0.14 in behind the rear face and 0.48 below the bore (scratch/grid2.py)
Its upper tabs' reach behind its rear face0.12 in ± 0.02 in 3 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.12 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 133 px/in on the near face. Read by the upper tab's rear end (px 2088) behind the rear face's edge (px 2072.5) on a gridded crop (scratch/grid2.py)
A thin tab on each side under the rail's rear end, shorter than the lower ones: the anti-rotation tabs the sellers name, beside the receiver's flat sides (upper_tab_gap).
The opening between its two upper tabs0.638 in ± 0.03 in 16.2 mmCorroboratedWorked out: 2 * {bcm-m4-upper.side_half_width}
Worked out 0.638 in ± 0.03 in used
2 * {bcm-m4-upper.side_half_width}, harvested
Not measured: no view shows it square on. The tabs stand beside a mil-spec receiver's flat sides under its rail (0.56 to 0.82 in above the bore on the catalog's receivers), which is what keeps the rail from turning, and they are drawn against those flats with no clearance. Primary Arms' view from behind (413379c0fd31) shows the far tab's inner face a little outside the channel's wall, as this figure has it (0.638 against the channel's 0.47).
Its upper tabs' bottom edge above the bore axis0.545 in ± 0.02 in 13.8 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.545 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 132 px/in. Read by the upper tab's bottom edge (row 652) above the side faces' middle line (row 724.3 there) (scratch/grid2.py)
Its upper tabs' top edge above the bore axis0.727 in ± 0.02 in 18.5 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.727 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 132 px/in. Read by the upper tab's top edge (row 628) above the side faces' middle line (row 724.3 there) (scratch/grid2.py)
Its rail's top above the bore axis1.2 in ± 0.02 in 30.5 mmCorroboratedPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 1.2 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots beside the column read: 51.3 px a pitch, 130.2 px/in. Read by at column 1450, where the lens stood over it: the rail's top (row 566.5) above the middle of the side face (its two creases, rows 680 and 758.3 at the muzzle end, 3.5 px lower here by the photo's 0.2° of tilt: row 722.8): 156.3 px (scratch/m1.py, m3.py)
Photo 1.22 in ± 0.05 in
Kenzie's Optics' gallery, mk16-ddc-1.webp: a short Desert Dirt MK16 seen from its rear end, nearly end on and a little from above, 504 x 504, harvested
Scale: its width across the side faces (this ledger's width) over 105.8 px: 66.6 px/in across; heights 0.955 of that, by the barrel nut's ring (530 px tall, 555 wide on a 6x crop). Read by the rail's top edge (row 247.5) above the middle of the two side faces (rows 306.7 to 343.3: 325): 77.5 px (scratch/grid.py)
A shorter rail of the same model (the 9.3 or 10.5 in), at a seventh of the level photo's resolution.
The level photo of this rail, at the higher resolution; the view from the rear end of a shorter one agrees within its own ±.
Not published. The bore's axis is taken at the middle of its side faces, which the middle rows of slots stand on. The catalog's mil-spec receivers have their rail 1.2125 and 1.2145 in above the bore (bcm-m4-upper, expo-arms-stripped-upper).
The tube's bottom flat below the bore axis0.86 in ± 0.02 in 21.8 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.86 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots beside the column read: 51.3 px a pitch, 130.2 px/in. Read by at column 1450: the tube's bottom edge (row 835) below the middle of the side face (row 722.8): 112.2 px; at the muzzle end the same reads 0.88 (113 px at 128 px/in) (scratch/m1.py)
Lower than half its width: the section isn't a regular octagon. Its faces between the sides and the bottom are longer than those between the sides and the rail (0.57 against 0.39 in of height on the level photo), and its bottom flat is the narrower for it.
The side faces' height (crease to crease)0.6 in ± 0.02 in 15.2 mmCorroboratedPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.6 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end (49.9 px a pitch), 1.5% more on the near face: 128.5 px/in. Read by the side face's two creases at the muzzle end, rows 680 and 758.3 on a 3x crop, and the flat tips of the muzzle end's outline (rows 680 to 756): 77 px (scratch/m3.py)
Photo 0.577 in ± 0.04 in
Kenzie's Optics' gallery, mk16-ddc-1.webp: a short Desert Dirt MK16 seen from its rear end, nearly end on and a little from above, 504 x 504, harvested
Scale: its width across the side faces (this ledger's width) over 105.8 px: 66.6 px/in across; heights 0.955 of that. Read by the side faces' vertical edges on the rear face, rows 306.7 to 343.3: 36.7 px (scratch/grid.py)
The level photo of this rail, at the higher resolution; the rear view of a shorter one agrees within its ±.
A regular octagon 1.59 in across would have 0.659 here. Where the faces at 45° begin, top and bottom.
The faces between the sides and the rail or the bottom: their distance from the bore axis0.774 in ± 0.02 in 19.7 mmCorroboratedWorked out: ({.width} / 2 + {.side_flat_height} / 2) * cos(45)
Worked out 0.774282 in ± 0.02 in used
({.width} / 2 + {.side_flat_height} / 2) * cos(45), harvested
Taken at 45° through the side faces' creases. The angle isn't published: Kenzie's Optics' rear view draws these faces at 44° (185 px across, 178 up once its heights are put right), and on the level photo their slots show 0.66 to 0.70 of the side rows' slots' height (45° shows 0.71).
Where the upper faces end and the neck under the rail begins, above the bore0.695 in ± 0.02 in 17.7 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.695 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end, 1.5% more on the near face: 128.5 px/in. Read by the crease above the upper row of slots (row 630 on a 3x crop of the muzzle end) above the middle of the side face (row 719.2): 89.2 px. Bullet Central's view of a shorter rail's muzzle end reads the upper face 0.38 in tall beside a side face of 0.59, the same within 0.02 (scratch/m3.py, grid.py)
The slope between the upper faces and the neck's walls, its height0.08 in ± 0.02 in 2 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.08 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end, 1.5% more on the near face: 128.5 px/in. Read by the lighter band between the upper face and the dark wall under the rail, rows 620 to 630 on a 3x crop of the muzzle end (scratch/m3.py)
The neck's width under the rail0.61 in ± 0.04 in 15.5 mmProvisionalPhoto: Kenzie's Optics' gallery, mk16-ddc-1.webp: a short Desert Dirt MK16 seen from its rear end, nearly end on and a little from above, 504 x 504
Photo 0.61 in ± 0.04 in used
Kenzie's Optics' gallery, mk16-ddc-1.webp: a short Desert Dirt MK16 seen from its rear end, nearly end on and a little from above, 504 x 504, harvested
Scale: its width across the side faces (this ledger's width) over 105.8 px: 66.6 px/in. Read by the neck's two outer walls on the rear face, 40 px apart on a 6x gridded crop; its rail reads 0.826 in wide at this scale against the standard's 0.835 (scratch/grid.py)
A shorter rail of the same model, seen at its rear end.
The channel under the rail (the gas tube's), its width0.47 in ± 0.04 in 11.9 mmProvisionalPhoto: Kenzie's Optics' gallery, mk16-ddc-1.webp: a short Desert Dirt MK16 seen from its rear end, nearly end on and a little from above, 504 x 504
Photo 0.47 in ± 0.04 in used
Kenzie's Optics' gallery, mk16-ddc-1.webp: a short Desert Dirt MK16 seen from its rear end, nearly end on and a little from above, 504 x 504, harvested
Scale: its width across the side faces (this ledger's width) over 105.8 px: 66.6 px/in. Read by the dark opening under the rail on the rear face, 30.8 px wide on a 6x gridded crop; Bullet Central's and Primary Arms' views of the muzzle end show the same open channel there (scratch/grid.py)
The channel's roof below the rail's top0.18 in ± 0.03 in 4.6 mmProvisionalPhoto: Kenzie's Optics' gallery, mk16-ddc-1.webp: a short Desert Dirt MK16 seen from its rear end, nearly end on and a little from above, 504 x 504
Photo 0.18 in ± 0.03 in used
Kenzie's Optics' gallery, mk16-ddc-1.webp: a short Desert Dirt MK16 seen from its rear end, nearly end on and a little from above, 504 x 504, harvested
Scale: its width across the side faces over 105.8 px: 66.6 px/in across; heights 0.955 of that. Read by the opening's top edge (row 259.2) below the rail's top edge (row 247.5): 11.7 px (scratch/grid.py)
The rail's depth, its top to where the neck's wall begins0.18 in ± 0.03 in 4.6 mmProvisionalPhoto: Bullet Central's gallery: a short Desert Dirt MK16 seen from ahead, above and its right, the muzzle end's section toward the lens, 3906 x 1464
Photo 0.18 in ± 0.03 in used
Bullet Central's gallery: a short Desert Dirt MK16 seen from ahead, above and its right, the muzzle end's section toward the lens, 3906 x 1464, harvested
Scale: the side face's height on the muzzle end's face (this ledger's side_flat_height over 165 px: 280 px/in up and down that face). Read by on the muzzle end's face: the rail's top corner (row 650) to where its sloped underside meets the neck's wall (row 700): 50 px, 18 of them the rail's upright edge (scratch/grid.py)
A shorter rail of the same model.
A check, not what the model draws: its rail's head is MIL-STD-1913's Figure 1 (std.picatinny.*; sellers: "M1913 picatinny rail"), whose lower 45° faces reach a neck of this ledger's width 0.223 in below the top.
The rail's edge between its sloped faces, how much of it is sloped above and below0.06 in ± 0.03 in 1.5 mmProvisionalPhoto: Bullet Central's gallery: a short Desert Dirt MK16 seen from ahead, above and its right, the muzzle end's section toward the lens, 3906 x 1464
Photo 0.06 in ± 0.03 in used
Bullet Central's gallery: a short Desert Dirt MK16 seen from ahead, above and its right, the muzzle end's section toward the lens, 3906 x 1464, harvested
Scale: the side face's height on the muzzle end's face: 280 px/in. Read by the rail's edge is upright for 18 px (0.064 in) of its 50, which leaves 0.06 each for the slopes above and below it if they are alike; the photo's lower slope alone reads 0.11 (scratch/grid.py)
A check, not what the model draws (the standard's head: rail_body_height's note).
Slots in its top rail36ProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 36 count used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the notches between the teeth along the top edge: 36, centres from px 198 to px 1977.5, each 49 to 52.5 px from the next with none missing; a longer tooth at each end (scratch/m2.py, m3.py)
Its rail's rearmost slot (its centre) ahead of its rear face0.67 in ± 0.02 in 17 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.67 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 52.0 px a pitch. Read by the rail's rear end (px 2066) behind the rearmost slot's centre (px 1977.5): 88.5 px, 1.70 pitches. The rail's rear end and the body's rear face are one plane within 0.05 in (scratch/m2.py)
Its rail's rearmost slot (its centre) ahead of the receiver's front face0.225 in ± 0.045 in 5.7 mmProvisionalWorked out: {.rear_face_x} + {.rail_slot0_from_rear}
Worked out 0.225 in ± 0.045 in used
{.rear_face_x} + {.rail_slot0_from_rear}, harvested
Its rail's front end ahead of its last slot's centre0.663 in ± 0.02 in 16.8 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.663 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end: 49.9 px a pitch. Read by the rail's front end (px 114) ahead of the frontmost slot's centre (px 198): 84 px, 1.68 pitches (scratch/m2.py, m3.py)
M-LOK slots on each side face (3 and 9 o'clock)8ProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 8 count used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the middle row's slots, light showing through each: eight, 200 to 208 px apart (scratch/m5.py); eight on the right side in Mile High's photo (aba62637245f)
M-LOK slots on each lower face (between the sides and the bottom)8ProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 8 count used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the lower row's slots, light showing through each: eight, their ends within 0.02 in of the side row's once each row is read at its own depth (scratch/m5.py)
M-LOK slots on each upper face (between the sides and the rail)7ProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 7 count used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the upper row's slots on the photo at full size: seven, each over one of the side row's front seven (their rear ends at px 1122, 1325, 1529 against the side row's 1124, 1332, 1532); seven on the right side in Primary Arms' view from above and ahead (6a8917d6710f)
One fewer than the side faces: where the rearmost would be, the upper face carries a sling swivel socket.
M-LOK slots on its underside (6 o'clock)8ProvisionalWorked out: {.mlok_side_slots}
Worked out 8 count used
{.mlok_side_slots}, harvested
The row is the sellers' sentence: "M-LOK slots on every quadrant" (Mile High, Primary Arms, Rifle Supply); Primary Arms of the 13.5 in rail: "seven sides of M-LOK slots". No photo on file shows the underside, so how many slots it has isn't counted: it is taken to have the side rows' eight, which is what fits ahead of the clamp block (mlok_bottom_slot0_x). An assumption, not a count.
The underside's rearmost M-LOK slot (its centre) ahead of the receiver's front face2.635 in ± 0.06 in 66.9 mmProvisionalWorked out: {.mlok_side_slot0_x}
Worked out 2.635 in ± 0.06 in used
{.mlok_side_slot0_x}, harvested
Not seen: taken at the side rows' stations (the three rows that are seen on each side stand in line with each other). The clamp block and its split take the rear of the bottom; the side rows' rearmost slot begins 2.45 in ahead of the rear face, 0.05 in ahead of where the block's front ramp ends on the traced outline (2.40), so the row starts there and all eight are ahead of the block. An assumption.
The side faces' rearmost M-LOK slot (its centre) ahead of the rear face3.08 in ± 0.04 in 78.2 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 3.08 in ± 0.04 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots as a ruler (a quadratic fit of their centres), the near face brought to its true place about column 1375 by k 1.02. Read by the rear ends of the six slots ahead of the lens (where the near slot's own edge bounds the light): rail coordinates -0.537, 3.486, 7.489, 11.509, 15.489, 19.487 once corrected, 3.997 pitches apart within 0.03; the rearmost slot's rear end then 6.255 pitches (2.464 in) ahead of the rail's rear end (33.697), its centre half a slot (std.mlok.slot_length) further: 3.094. The rearmost slot's own front end, read from the other side of the lens (rail coordinate 24.304), puts its centre at 3.071: the value is between the two (scratch/m5.py)
The side and lower faces' rearmost M-LOK slot (its centre) ahead of the receiver's front face2.635 in ± 0.06 in 66.9 mmProvisionalWorked out: {.rear_face_x} + {.mlok_side_slot0_from_rear}
Worked out 2.635 in ± 0.06 in used
{.rear_face_x} + {.mlok_side_slot0_from_rear}, harvested
The upper faces' rearmost M-LOK slot (its centre) ahead of the receiver's front face4.21 in ± 0.06 in 106.9 mmProvisionalWorked out: {.mlok_side_slot0_x} + {std.mlok.slot_pitch}
Worked out 4.209803 in ± 0.06 in used
{.mlok_side_slot0_x} + {std.mlok.slot_pitch}, harvested
One slot pitch ahead of the side faces' rearmost: the upper rows have the side rows' front seven.
The upper rows of slots, their middle line above the bore0.51 in ± 0.02 in 13 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.51 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end, 1% more at this face's depth: 128 px/in. Read by the upper row's slots' middle (row 654 on a 3x crop of the muzzle end) above the middle of the side face (row 719.2): 65 px (scratch/m3.py)
The lower rows of slots, their middle line below the bore0.565 in ± 0.02 in 14.4 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.565 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end, 1% more at this face's depth: 128 px/in. Read by the lower row's slots' middle (row 792 on a 3x crop of the muzzle end) below the middle of the side face (row 719.2): 72.5 px (scratch/m3.py)
The room inside its faces, from a face in to the barrel (what an M-LOK accessory's nuts may take)No value yetMissingNo source yet
Not sourced: it depends on the barrel and gas block under it, other parts. Its side walls are 0.165 in by the sellers' two figures (1.59 across, 1.26 inside).
The sling swivel sockets (their centres) ahead of the rear face2.77 in ± 0.04 in 70.4 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 2.77 in ± 0.04 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots as a ruler, the near face brought to its true place about column 1375 by k 1.015 (this face's depth). Read by the cup's centre (px 1706.7) as rail coordinate 26.66 once corrected, 7.04 pitches ahead of the rail's rear end (scratch/grid2.py, m5.py)
A round steel cup let into each upper face at the rear, where that face has no slot: on the left side in Primary Arms' photos and on the right in Mile High's.
The sling swivel sockets' centres above the bore0.585 in ± 0.02 in 14.9 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.585 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 131.5 px/in. Read by the cup's centre (row 648.3) above the side faces' middle line (row 725.3 there): 77 px (scratch/grid2.py)
A sling swivel socket's cup, its outside diameter0.545 in ± 0.02 in 13.8 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.545 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 131.5 px/in. Read by the cup's bright rim along the rifle, where the face's slope doesn't shorten it: 71.7 px on a 3x gridded crop (scratch/grid2.py)
A sling swivel socket's hole, its diameter0.31 in ± 0.03 in 7.9 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.31 in ± 0.03 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 131.5 px/in. Read by the dark hole inside the cup's rim along the rifle: 40.7 px on a 3x gridded crop (scratch/grid2.py)
The front cross bolt (its centre) ahead of the rear face1.57 in ± 0.03 in 39.9 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 1.57 in ± 0.03 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end, 1.5% more on the near face: 132.5 px/in. Read by the front hole of the plate (px 1864, 822.7) ahead of the rear face's edge (px 2072.5) on a 3x gridded crop (scratch/grid2.py)
Two bolts across the clamp block under the tube, their Torx heads on the right side (Mile High's photo) and a plate with two threaded holes on the left (Primary Arms').
The rear cross bolt (its centre) ahead of the rear face0.55 in ± 0.03 in 14 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.55 in ± 0.03 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end, 1.5% more on the near face: 132.5 px/in. Read by the rear hole of the plate (px 1999.3, 835) ahead of the rear face's edge (px 2072.5); the two holes 1.02 in apart, and the two Torx heads 1.01 apart on Mile High's photo of the right side (83 px at 82 px/in by the rail's teeth there) (scratch/grid2.py)
The front cross bolt's centre below the bore0.745 in ± 0.02 in 18.9 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.745 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 132.5 px/in on the near face. Read by the front hole's centre (row 822.7) below the side faces' middle line (row 724 there) (scratch/grid2.py)
The rear cross bolt's centre below the bore0.835 in ± 0.02 in 21.2 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.835 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 132.5 px/in on the near face. Read by the rear hole's centre (row 835) below the side faces' middle line (row 724.3 there) (scratch/grid2.py)
Lower than the front one, on both sides' photos (0.09 in on the left, 0.11 on the right).
A cross bolt's threaded hole in the left side's plate, its diameter0.21 in ± 0.02 in 5.3 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.21 in ± 0.02 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 132.5 px/in on the near face. Read by each round hole in the plate, 28 px across on a 3x gridded crop (scratch/grid2.py)
A cross bolt's Torx head on the right side, its diameter0.32 in ± 0.03 in 8.1 mmProvisionalPhoto: Mile High Shooting's photo for 05-792B: the handguard alone, its right side, the rear end nearer the lens, 1280 x 1091
Photo 0.32 in ± 0.03 in used
Mile High Shooting's photo for 05-792B: the handguard alone, its right side, the rear end nearer the lens, 1280 x 1091, harvested
Scale: its own rail's teeth beside the heads: 32 px a pitch, 81.2 px/in. Read by each bright head, 26 px across on a 5x gridded crop, in a dark counterbore of 38 px (0.46 in) (scratch/grid2.py)
A cross bolt's counterbore on the right side, its diameter0.46 in ± 0.03 in 11.7 mmProvisionalPhoto: Mile High Shooting's photo for 05-792B: the handguard alone, its right side, the rear end nearer the lens, 1280 x 1091
Photo 0.46 in ± 0.03 in used
Mile High Shooting's photo for 05-792B: the handguard alone, its right side, the rear end nearer the lens, 1280 x 1091, harvested
Scale: its own rail's teeth beside the heads: 32 px a pitch, 81.2 px/in. Read by the dark ring round each head, 38 px across on a 5x gridded crop (scratch/grid2.py)
The clamp block's split along its underside, its width0.51 in ± 0.05 in 13 mmProvisionalPhoto: Kenzie's Optics' gallery, mk16-ddc-1.webp: a short Desert Dirt MK16 seen from its rear end, nearly end on and a little from above, 504 x 504
Photo 0.51 in ± 0.05 in used
Kenzie's Optics' gallery, mk16-ddc-1.webp: a short Desert Dirt MK16 seen from its rear end, nearly end on and a little from above, 504 x 504, harvested
Scale: its width across the side faces (this ledger's width) over 105.8 px: 66.6 px/in. Read by the dark channel in the middle of the block's rear face, from its bottom up to the barrel nut: 34 px wide on a 6x gridded crop (scratch/grid.py)
A shorter rail of the same model.
The block under the rear end is two halves with a channel between them, drawn together by the cross bolts. How far forward the channel runs isn't seen.
The left side's nut plate, each end's width round its bolt hole0.52 in ± 0.03 in 13.2 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.52 in ± 0.03 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 132.5 px/in on the near face. Read by the front lobe 66.7 px along the rifle and 65 up and down, the rear one 71.7 and 65, on a 3x gridded crop (scratch/grid2.py)
A steel plate let into the clamp block's left side, with the two cross bolts' threaded holes in it: a lobe round each hole and a bar between them. The lobes are six-sided with round corners; the model draws them round.
The nut plate's bar between its two ends, its height0.2 in ± 0.03 in 5.1 mmProvisionalPhoto: Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.2 in ± 0.03 in used
Primary Arms' gallery for 05-792B, 05-792B_02.jpg: the handguard alone, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end: 132.5 px/in on the near face. Read by the bar between the lobes, rows 803 to 830: 27 px on a 3x gridded crop (scratch/grid2.py)
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- GRITR Sports $301.77 Black Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $375.00 Black Nov 21, 2026, in stock that day
- Primary Arms $375.00 Black Nov 21, 2026, in stock that day
- Primary Arms $400.00 Desert Dirt Color Nov 21, 2026, in stock that day
- Aerospace Arms $400.00 Desert Dirt Color Nov 21, 2026, in stock that day
- Rifle Supply $375.99 Black Nov 21, 2026, out of stock that day