Red dot mount
Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro
The mount and spacer Aimpoint sells the Micro T-2 on for an AR-15: "This AR15 Ready version includes 39 mm Spacer and LRP (Lever Release Picatinny) Mount" (Aimpoint's sheet, ITEM NO. 200198). A Micro-footprint dot screws to the spacer's top; a T-2 on it has its axis 39 mm over the rail ("Sight, mount and high spacer – 39 mm ... measured from top surface of Picatinny/Weaver rail"), a lower 1/3 co-witness. The base clamps to the rail by a lever: Bravo Company, "a 39mm spacer and LRP (Lever Release Picatinny) base that attaches to MIL-STD-1913 rails with a quick detach mechanism". The page linked is Bravo Company's for the pair: no page on file sells the mount alone.

- Weight
- 1.2 oz ± 0.035 oz Conflictworked out: {aimpoint-micro-t-2.weight} - {aimpoint-micro-t-2.sight_weight}Its sources span 1.16 oz to 4.06 oz.
- Lowest price
- Sold in the Aimpoint Micro T-2 Red Dot Reflex Sight - AR15 Ready, not by itself
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Two-tone 16 in, Stealth Gray and soft-shooting”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The deck's top (the spacer's top, where a dot's base sits) above the rail's top0.946 in ± 0.037 in 24 mmProvisionalWorked out: {aimpoint-micro-t-2.optical_axis_above_rail} - {aimpoint-micro-t-2.axis_above_base}
Worked out 0.9464 in ± 0.037 in used
{aimpoint-micro-t-2.optical_axis_above_rail} - {aimpoint-micro-t-2.axis_above_base}, harvested
39 mm (1.535 in) less the T-2's 0.589 in.
Aimpoint gives the mount's height only as the axis height of the Micro T-2 on it: "Sight, mount and high spacer – 39 mm ... measured from top surface of Picatinny/Weaver rail" (the sheet for 200198). Less the T-2's own axis over its base it is the deck's height; another Micro-footprint dot on it stands as much higher or lower as its own axis is over its base.
The footprint's middle along the deck, ahead of the clamp's middle0 in ± 0.05 in 0 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view shows the footprint's screws or lug. Their middle is taken to be the spacer block's, which is where the frame's origin is along the rail (the side outline's origin is the block's middle over its rows: aimpoint-micro-t-2's profiles.side), with the LRP base about it as the part before the split had it.
Worked out 0 in ± 0.05 in used
An assumption for the drawing, not a reading: no view shows the footprint's screws or lug. Their middle is taken to be the spacer block's, which is where the frame's origin is along the rail (the side outline's origin is the block's middle over its rows: aimpoint-micro-t-2's profiles.side), with the LRP base about it as the part before the split had it.
The LRP base's length along the rail (without the lever's tip)2.036 in ± 0.023 in 51.7 mmProvisionalWorked out: {aimpoint-micro-t-2.mount_length}
Worked out 2.036 in ± 0.023 in used
{aimpoint-micro-t-2.mount_length}, harvested
Read on Aimpoint's left profile of the pair, in the sight's ledger.
How far the LRP base reaches below the rail's top0.392 in ± 0.03 in 10 mmProvisionalWorked out: {aimpoint-micro-t-2.clamp_below_rail}
Worked out 0.392 in ± 0.03 in used
{aimpoint-micro-t-2.clamp_below_rail}, harvested
Where the sheet's 39 mm puts the rail's top under the axis of the pair: the sight's ledger says how.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots