Handguard
MAS Defense 15" NERO M-LOK FREE FLOAT
MAS Defense's 15 in NERO M-LOK free-float handguard ("Extended Rifle Length"): a monolithic top rail that "sits directly against the upper receiver rail", M-LOK slots at 3, 6 and 9 o'clock, a slim 1.25 in bore that "will require a slim muzzle device", QD sockets at the front and rear, clamped on its own steel barrel nut by two screws. Made in USA.

- Weight
- 13.4 oz ± 0.05 oz Confirmedpublished: MAS Defense, MAS DEFENSE 15" NERO M-LOK FREE FLOAT - STEALTH GRAY (MAS00106384), description, the maker, read Oct 28, 2026
- Lowest price
- $89.99 at MAS Defense, read Nov 21, 2026 (Black)
- Maker's number
- MAS00106384
- Colours
- Stealth Gray (Cerakote), Black, (FDE) Flat Dark Earth, Navy Blue (Cerakote), OD Green (Cerakote, sold as a blem)
- Drawn as
- modelled
- Maker's page
- masdefense.com
In “Two-tone 16 in, Stealth Gray and soft-shooting”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Weight of the handguard alone (without its barrel nut and screws)10 oz ± 0.5 ozConfirmedPublished: MAS Defense, MAS DEFENSE 15" NERO M-LOK FREE FLOAT - STEALTH GRAY (MAS00106384), description, the maker, read Oct 28, 2026
Published “Weight comes in at 10oz for the rail itself.” used
MAS Defense, MAS DEFENSE 15" NERO M-LOK FREE FLOAT - STEALTH GRAY (MAS00106384), description, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
The model's volume as aluminium is held to it (the nut and the screws aren't in the model's body).
Length (its rear face to its rail's front end)15.12 in ± 0.05 in 384 mmCorroboratedPhoto: MAS Defense's gallery for its Stealth Gray builder set MDCK-AR15-SUL-NM15-STGRY, picture -2: this handguard on MAS's upper and an 80% lower, their right side seen level, muzzle to the right, 800 x 600
Published “MAS DEFENSE 15" NERO M-LOK FREE FLOAT - STEALTH GRAY”
MAS Defense, the page's title (MAS00106384); the description says "Extended Rifle Length", the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 15.12 in ± 0.05 in used
MAS Defense's gallery for its Stealth Gray builder set MDCK-AR15-SUL-NM15-STGRY, picture -2: this handguard on MAS's upper and an 80% lower, their right side seen level, muzzle to the right, 800 x 600, harvested
Scale: its own top rail's 37 slots one Picatinny pitch apart (std.picatinny.slot_pitch), their see-through middles fitted along the picture with a projective scale (rms 0.08 px; 33.4 px/in at the rearmost slot, 34.4 at the foremost). Read by the seam between its rear face and the receiver (column 271.6, a line from the rail's foot to the lower's front, looked at at 8x) 0.350 in behind the rearmost slot's middle; the rail's front end (column 783.5) 14.766 ahead of it (side.py)
Photo 15.12 in ± 0.05 in
MAS Defense's gallery for the same builder set, picture -3: their left side seen level, muzzle to the left, 800 x 600, harvested
Scale: its own top rail, mirrored: 32 slots (the sixth to the last) fitted as the right side's (rms 0.15 px; 33.7 to 33.4 px/in). Read by the seam 0.337 in behind the rearmost slot and the rail's front end 14.783 ahead of it, the slots counted from the right side's by their M-LOK rows (which agree to 0.02 in): 15.120 (side.py)
The two side pictures agree to 0.005 in, and the title's 15 is a name; the right side's is the picture the outline is traced from.
MAS names it by its length ("15\"" in every title) and calls it "Extended Rifle Length"; it states no length otherwise. Both side pictures, read along its own rail, put its rail's front end 15.12 in ahead of its rear face; the body below the rail runs 0.07 in further at the bottom of its front face (a bevel the pictures show at three pixels, not drawn).
Width across its side flats (the M-LOK faces at 3 and 9 o'clock)1.6 in ± 0.05 in 40.6 mmProvisionalPhoto: MAS Defense's gallery for the FDE 15 in, MAS00106364-3: the handguard from above beside its barrel nut and screws, 800 x 600
Photo 1.6 in ± 0.05 in used
MAS Defense's gallery for the FDE 15 in, MAS00106364-3: the handguard from above beside its barrel nut and screws, 800 x 600, harvested
Scale: its own rail's top across, the standard's .835 in (std.picatinny.top_width): 48 to 49 px between the see-through windows either side of it, on the picture turned 32.4 degrees to level it. Read by the silhouette's two long edges, 92.2 px apart (91.0 to 92.5 along its length, at the 170 level), over the rail's 48.5 px: 1.90 times .835 in (planw.py)
Not published. The pictures from above are of the 15 in in black and in FDE (MAS's renders, the same view). Its rail's top is 1.2 in nearer the lens than the side flats' edges, which reads the flats a few percent narrow from a lens a few feet off: in the ±.
Its rail's top above the bore axis1.22 in ± 0.04 in 31 mmCorroboratedPhoto: MAS Defense's gallery for its Stealth Gray builder set, picture -2: the right side seen level, 800 x 600
Photo 1.22 in ± 0.04 in used
MAS Defense's gallery for its Stealth Gray builder set, picture -2: the right side seen level, 800 x 600, harvested
Scale: its rail's pitch at the picture's middle: 33.86 px/in. Read by the rail's tooth tops (row 218.4, where the rows over its length go half dark) above the middle of the side face's M-LOK row (rows 255.5 to 263.5 see through): 41.35 px (side.py)
Photo 1.19 in ± 0.04 in
MAS Defense's gallery for the same builder set, picture -3: the left side seen level, 800 x 600, harvested
Scale: its rail's pitch at the picture's middle: 33.58 px/in. Read by as the right side's: rows 221.7 and 261.5 (side.py)
The picture the outline is traced from; the left reads 0.035 less, within both ±.
The bore's level is the middle of the side faces' M-LOK row (3 and 9 o'clock). MAS: "The monolithic top rail of the handguard sits directly against the upper receiver rail"; the catalog's mil-spec uppers have their rail 1.2125 above the bore (bcm-m4-upper), between the two readings.
Its bottom flat below the bore axis0.85 in ± 0.04 in 21.6 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 0.85 in ± 0.04 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its rail's pitch at the picture's middle: 33.86 px/in. Read by the silhouette's bottom over its length ahead of the clamp's lug (row 288.5) below the M-LOK row's middle (259.75): 28.75 px (side.py)
Photo 0.82 in ± 0.04 in
the builder set's left side seen level, 800 x 600, harvested
Scale: its rail's pitch at the picture's middle: 33.58 px/in. Read by as the right side's: rows 289.0 and 261.5 (side.py)
The picture the outline is traced from; the left reads 0.03 less, within both ±.
Height (its rail's top to its bottom flat; the clamp's lug hangs lower at the rear)2.07 in ± 0.06 in 52.6 mmCorroboratedWorked out: {.rail_top_above_bore} + {.bottom_below_bore}
Worked out 2.07 in ± 0.06 in used
{.rail_top_above_bore} + {.bottom_below_bore}, harvested
Inside diameter1.25 in ± 0.005 in 31.8 mmConfirmedPublished: MAS Defense, MAS DEFENSE 15" NERO M-LOK FREE FLOAT - STEALTH GRAY (MAS00106384), description; the builder set's page says "(ID 1.25\")", the maker, read Oct 28, 2026
Published “The slim 1.25" inner diameter will require a slim muzzle device.” used
MAS Defense, MAS DEFENSE 15" NERO M-LOK FREE FLOAT - STEALTH GRAY (MAS00106384), description; the builder set's page says "(ID 1.25\")", the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
MAS: it "will require a slim muzzle device" (one that passes through 1.25 in).
Its rear face ahead of the receiver's front face (negative: behind it)-0.445 in ± 0.03 in -11.3 mmConfirmedWorked out: 0in - {std.ar15.upper_barrel_thread_length}
Worked out -0.445 in ± 0.03 in used
0in - {std.ar15.upper_barrel_thread_length}, harvested
Read on a copy on file and 0627ae73f200 (the builder set's two sides seen level, 800 x 600): the seam between the receiver and its rear face, looked at at 8x on both, one line a pixel wide.
Its rear face bears on the receiver's shoulder, where the barrel-nut thread begins (std.ar15.upper_barrel_thread_length: "A barrel nut and a free-float handguard's rear end come back to that shoulder"): the builder set's two side pictures show one line between the receiver and its rear face, from the rail's foot down to the lower, and no gap at 34 px/in; its ring at the rear covers the thread. MAS: "The monolithic top rail of the handguard sits directly against the upper receiver rail."
The side flat's upper edge (where it meets the upper face) above the bore axis0.62 in ± 0.03 in 15.7 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 0.62 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its rail's pitch at the picture's middle: 33.86 px/in. Read by on the solid stretch at its rear end (the logo's), the upper face reads lighter than the side flat: the step at row 238.75, 21 px above the M-LOK row's middle (looked at at 8x)
Photo 0.6 in ± 0.03 in
the builder set's left side seen level, 800 x 600, harvested
Scale: its rail's pitch at the picture's middle: 33.58 px/in. Read by as the right side's: row 241.25 against 261.5
The picture the outline is traced from; the left reads 0.02 less.
The side flat's lower edge (where it meets the lower face) below the bore axis0.4 in ± 0.03 in 10.2 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 0.4 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its rail's pitch at the picture's middle: 33.86 px/in. Read by on the solid stretch at its rear end, the lower face reads lighter than the side flat: the step at row 273.1, 13.35 px below the M-LOK row's middle (8x)
Photo 0.38 in ± 0.03 in
the builder set's left side seen level, 800 x 600, harvested
Scale: its rail's pitch at the picture's middle: 33.58 px/in. Read by as the right side's: row 274.4 against 261.5
The picture the outline is traced from; the left reads 0.02 less.
Where the lower face's lit band ends, below the bore axis (a check on the section)0.78 in ± 0.04 in 19.8 mmProvisionalPhoto: the builder set's two sides seen level, 800 x 600
Photo 0.78 in ± 0.04 in used
the builder set's two sides seen level, 800 x 600, harvested
Scale: each picture's rail pitch at its middle: 33.86 and 33.58 px/in. Read by the lower face's lighter band ends at row 286.25 on both pictures (8x): 0.78 and 0.74 below each M-LOK row's middle
Not built from: the lower faces are drawn at 45 degrees to the bottom flat (bottom_half_width), and that puts their lower edge at the bottom flat, 0.85 below. The lit band ending 0.07 above it is the round of that corner.
Half the bottom flat's width (the 6 o'clock M-LOK face)0.35 in ± 0.05 in 8.9 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view from below is on file. The lower faces are taken at 45 degrees from the side flat's lower edge (0.40 below the bore, 0.80 out) down to the bottom flat (0.85 below): 0.80 - 0.45.
Worked out 0.35 in ± 0.05 in used
An assumption for the drawing, not a reading: no view from below is on file. The lower faces are taken at 45 degrees from the side flat's lower edge (0.40 below the bore, 0.80 out) down to the bottom flat (0.85 below): 0.80 - 0.45., harvested
Its wall's thickness (the faces' and the rail's underside's), from the clamp's ring forward0.06 in ± 0.02 in 1.5 mmProvisionalWorked out: Worked out, not read: the wall at which the model weighs MAS's 10 oz for the rail itself as 6061 aluminium.
Worked out 0.06 in ± 0.02 in used
Worked out, not read: the wall at which the model weighs MAS's 10 oz for the rail itself as 6061 aluminium., harvested
No picture shows into it. Worked out from MAS's weight for the rail itself (rail_weight, 10 oz): the wall that makes the model's volume, as 6061 aluminium (std.density.aluminium), weigh that, its outside and its openings as the pictures give them (the model built at 0.08 in held 7.11 cubic inches, at 0.12 in 8.63: 6.38 is 0.061; the rail head, 0.24 in deep, and the clamp ring at the rear hold 4.1 of it whatever the wall. With the neck under the head since, 2026-10-28, it holds 6.245 at 0.06: 9.79 oz). Inside it the published 1.25 in bore runs through the clamp's ring at the rear end, where the screws close it on the nut; ahead of the ring the inside is wider than the bore.
Its M-LOK faces' distance from the bore axis (one figure for all three)0.8 in ± 0.03 in 20.3 mmProvisionalWorked out: {.width} / 2
Worked out 0.8 in ± 0.03 in used
{.width} / 2, harvested
The side flats stand 0.80 out and the bottom 0.85: the side flats' is used, so a part on the bottom face is drawn 0.05 in into it.
Its rail's underside (where the upper faces and their openings end) below the rail's top0.24 in ± 0.03 in 6.1 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 0.24 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its rail's pitch at the picture's middle: 33.86 px/in. Read by the upper openings' tops (row 226.5, where the rows go from solid to 63% see-through) below the tooth tops (218.4): 8.1 px (side.py)
Photo 0.23 in ± 0.03 in
the builder set's left side seen level, 800 x 600, harvested
Scale: 33.58 px/in. Read by as the right side's: rows 229.5 and 221.7
The picture the outline is traced from.
Where its upper faces meet the neck under its rail's head, below the rail's top0.4 in ± 0.05 in 10.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no picture shows the neck; as deep as the clamps on file need under a Picatinny head.
Worked out 0.4 in ± 0.05 in used
An assumption for the drawing, not a reading: no picture shows the neck; as deep as the clamps on file need under a Picatinny head., harvested
The rail's lower faces are the standard's, carried down to its underside (rail_underside_below_top, where the upper openings end); under that a neck stands straight down to where the upper faces meet it. No picture gives the neck: the side pictures show the upper face's light band up to the openings' tops, 4 px at 34 px/in. A Picatinny rail leaves room under its head for an accessory's jaws, and the clamps on file reach 0.40 below the rail's top beside the head (Aimpoint's Micro T-2 and Duty RDS mounts, EOTECH's G33: app/tests/rail-clamps.test.ts, 2026-10-28, which found their feet in the faces when they ran straight up to the underside).
Slots in its top rail37ProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 37 count used
the builder set's right side seen level, 800 x 600, harvested
Scale: none: a count. Read by 37 see-through slots between the seam with the receiver and its front end, every one 13.1 to 13.5 px from the next (side.py); the left side's fit, which began at the sixth, has 32 to the same front end
Its rail's rearmost slot's middle ahead of its rear face0.35 in ± 0.03 in 8.9 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 0.35 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by the seam (column 271.6) 0.350 in behind the rearmost slot's middle
Photo 0.34 in ± 0.03 in
the builder set's left side seen level, 800 x 600, harvested
Scale: its own rail, fitted from its sixth slot (side.py). Read by the seam 2.307 behind the sixth slot, five pitches: 0.337
The picture the outline is traced from.
M-LOK slots in each row7ProvisionalPhoto: the builder set's two sides seen level, 800 x 600
Photo 7 count used
the builder set's two sides seen level, 800 x 600, harvested
Scale: none: a count. Read by seven see-through slots in the row at the bore's level between the two round sockets, on each picture (side.py)
Seven in each side face's row on both pictures. The bottom's row (6 o'clock) isn't in any picture on file and is taken to be the same seven at the same places.
Its rearmost M-LOK slot's middle ahead of its rear face3.51 in ± 0.03 in 89.2 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 3.51 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py); the slots' own middles are 1.571 in apart on it, the standard's 1.5748 (std.mlok.slot_pitch) within 0.3%. Read by the seven slots' see-through middles less the standard's pitch from each: 3.162 in ahead of the rail's rearmost slot (3.152 to 3.178), and that 0.350 ahead of the rear face
Photo 3.49 in ± 0.03 in
the builder set's left side seen level, 800 x 600, harvested
Scale: its own rail, fitted from its sixth slot (side.py). Read by as the right side's: 3.157 ahead of the rearmost rail slot (3.147 to 3.180), that 0.337 ahead of the rear face
The picture the outline is traced from; the two sides' rows are at the same places within 0.02 in.
Openings in each upper face (between the side flat and the rail)18ProvisionalPhoto: the builder set's two sides seen level, 800 x 600
Photo 18 count used
the builder set's two sides seen level, 800 x 600, harvested
Scale: none: a count. Read by 18 see-through openings in the row under the rail on each picture (side.py)
The rearmost upper opening's middle (at the row's mid-height) ahead of its rear face2.82 in ± 0.03 in 71.6 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 2.82 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by row 236 (mid-height of the row): the first opening's see-through middle 2.472 ahead of the rearmost rail slot, that 0.350 ahead of the rear face
Photo 2.8 in ± 0.03 in
the builder set's left side seen level, 800 x 600, harvested
Scale: its own rail, fitted from its sixth slot (side.py). Read by row 239: 0.494 ahead of the sixth slot, 2.464 ahead of the rearmost, that 0.337 ahead of the rear face
The picture the outline is traced from.
The upper openings' pitch0.688 in ± 0.003 in 17.5 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 0.688 in ± 0.003 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by the first and the 18th openings' middles 11.700 in apart over 17
Photo 0.689 in ± 0.003 in
the builder set's left side seen level, 800 x 600, harvested
Scale: its own rail, fitted from its sixth slot (side.py). Read by 11.706 in over 17
The picture the outline is traced from; the two agree within their ±.
An upper opening's length along the handguard, at the row's mid-height0.55 in ± 0.03 in 14 mmProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 0.55 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by row 236: the openings over the lens's foot (the widest rail slots, column 481) see through 0.55 to 0.57 in, those at the ends 0.42 to 0.51
Read where the lens stood over it, so that the far wall's opening, which the see-through also passes, stands in line with the near one.
An upper opening's ends' lean from the upright, its top forward (seen from the side)30° ± 3°ProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 30 deg ± 3 deg used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by five openings over the lens's foot read at rows 229 and 244 (0.443 in apart): their middles 0.25 in further forward at the top: 0.57 in an inch, 30 degrees
The upper openings' lower ends above the bore axis0.39 in ± 0.03 in 9.9 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 0.39 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: 33.86 px/in. Read by the row goes solid at row 246.5, 13.25 px above the M-LOK row's middle (side.py)
Photo 0.39 in ± 0.03 in
the builder set's left side seen level, 800 x 600, harvested
Scale: 33.58 px/in. Read by row 248.5 against 261.5: 0.387
Both read 0.39.
Openings in each lower face (between the side flat and the bottom)18ProvisionalPhoto: the builder set's two sides seen level, 800 x 600
Photo 18 count used
the builder set's two sides seen level, 800 x 600, harvested
Scale: none: a count. Read by 18 see-through openings in the row under the M-LOK row on each picture (side.py)
The rearmost lower opening's middle (at its mid-height) ahead of its rear face2.05 in ± 0.03 in 52.1 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 2.05 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by row 278: 1.703 ahead of the rearmost rail slot, that 0.350 ahead of the rear face
Photo 2.05 in ± 0.03 in
the builder set's left side seen level, 800 x 600, harvested
Scale: its own rail, fitted from its sixth slot (side.py). Read by row 279: 0.254 behind the sixth slot, 1.716 ahead of the rearmost, that 0.337 ahead of the rear face
Both read 2.053.
The lower openings' pitch0.689 in ± 0.003 in 17.5 mmProvisionalPhoto: the builder set's two sides seen level, 800 x 600
Photo 0.689 in ± 0.003 in used
the builder set's two sides seen level, 800 x 600, harvested
Scale: each picture's own rail, fitted (side.py). Read by the first and the 18th openings' middles 11.707 and 11.702 in apart over 17: the upper row's pitch
A lower opening's length along the handguard, at its mid-height0.52 in ± 0.04 in 13.2 mmProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 0.52 in ± 0.04 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by rows 275 to 280, the openings over the lens's foot: 0.49 to 0.55 in see-through
A lower opening's ends' lean from the upright, its top forward (seen from the side)24° ± 5°ProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 24 deg ± 5 deg used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by five openings over the lens's foot read at rows 275 and 280 (0.148 in apart): their middles 0.065 in further forward at the top: 0.44 in an inch, 24 degrees
The lower openings' lower ends below the bore axis (seen from the side)0.67 in ± 0.03 in 17 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 0.67 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: 33.86 px/in. Read by the row goes solid at row 282.5 (side.py)
Photo 0.655 in ± 0.03 in
the builder set's left side seen level, 800 x 600, harvested
Scale: 33.58 px/in. Read by row 283.5 against 261.5
The picture the outline is traced from.
Its QD sockets' holes across0.37 in ± 0.04 in 9.4 mmProvisionalPhoto: the builder set's two sides seen level, 800 x 600
Photo 0.37 in ± 0.04 in used
the builder set's two sides seen level, 800 x 600, harvested
Scale: 33.9 px/in. Read by the rear sockets' rims, 12 to 13 px across on both pictures and the front one's on the right, looked at at 5x and 8x
MAS: "Quick Detach Mounts are built into the handguard at the front and rear positions." Each is a round hole in the side flat at the bore's level, on both sides.
The rear QD socket's middle ahead of its rear face2.27 in ± 0.04 in 57.7 mmProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 2.27 in ± 0.04 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by the rim's middle (column 347.5, at 5x) 1.922 ahead of the rearmost rail slot, that 0.350 ahead of the rear face
The front QD socket's middle ahead of its rear face14.3 in ± 0.05 in 363.2 mmProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 14.3 in ± 0.05 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by the rim's middle (column 755.5, at 5x) 13.952 ahead of the rearmost rail slot, that 0.350 ahead of the rear face
The clamp's lug under its rear end: its bottom below the bore axis1.08 in ± 0.03 in 27.4 mmProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 1.08 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: 33.86 px/in. Read by the silhouette's bottom under the rear end (row 296.5) below the M-LOK row's middle (side.py)
Its two screws cross the lug (MAS: "The (2) handguard screws should be torqued evenly to 40 INCH LBS"); a buyer on the page: "Holes should be recessed, but instead, screws are sticking out."
Where the lug's flat bottom ends, ahead of its rear face1.18 in ± 0.04 in 30 mmProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 1.18 in ± 0.04 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by the bottom at row 296 to column 311, as the fitted rail reads it
Where the lug's sloped front meets the bottom flat, ahead of its rear face1.48 in ± 0.04 in 37.6 mmProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 1.48 in ± 0.04 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by the bottom rises to the flat's row 288 at column 321
The clamp's rear screw ahead of its rear face0.34 in ± 0.03 in 8.6 mmCorroboratedPhoto: the builder set's right side seen level, 800 x 600
Photo 0.34 in ± 0.03 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: its own rail's 37 slots, fitted (side.py). Read by the screw's end (column 283, 8x) 0.008 behind the rearmost rail slot
Photo 0.37 in ± 0.03 in
the builder set's left side seen level, 800 x 600, harvested
Scale: its own rail, fitted from its sixth slot (side.py). Read by the screw's head (column 286 mirrored, 8x)
The picture the outline is traced from.
The clamp's two screws apart0.6 in ± 0.03 in 15.2 mmProvisionalPhoto: the builder set's two sides seen level, 800 x 600
Photo 0.6 in ± 0.03 in used
the builder set's two sides seen level, 800 x 600, harvested
Scale: each picture's own rail, fitted (side.py). Read by 0.599 on the right (columns 283 and 303), 0.607 on the left
The clamp's screws below the bore axis0.93 in ± 0.03 in 23.6 mmProvisionalPhoto: the builder set's two sides seen level, 800 x 600
Photo 0.93 in ± 0.03 in used
the builder set's two sides seen level, 800 x 600, harvested
Scale: 33.86 and 33.58 px/in. Read by their middles at rows 291.25 and 292.5 (8x): 0.93 and 0.92 below each M-LOK row's middle
A clamp screw's head across (on its left side)0.26 in ± 0.04 in 6.6 mmProvisionalPhoto: the builder set's left side seen level, 800 x 600
Photo 0.26 in ± 0.04 in used
the builder set's left side seen level, 800 x 600, harvested
Scale: 33.58 px/in. Read by the two round heads standing on the lug's left face, about 8.75 px across (8x)
A clamp screw's end across (on its right side)0.2 in ± 0.04 in 5.1 mmProvisionalPhoto: the builder set's right side seen level, 800 x 600
Photo 0.2 in ± 0.04 in used
the builder set's right side seen level, 800 x 600, harvested
Scale: 33.86 px/in. Read by the two smaller rounds on the lug's right face, about 6.9 px across (8x)
How far a clamp screw's head stands off the lug's left face0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the level side pictures see the heads face on, and the picture from the front right sees the lug's right face, where the screws' ends are.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: the level side pictures see the heads face on, and the picture from the front right sees the lug's right face, where the screws' ends are., harvested
A buyer on its page: "Holes should be recessed, but instead, screws are sticking out."
Its barrel nut's wrench flats across (the nut isn't drawn: it is inside its rear end)1.188 in ± 0.005 in 30.2 mmConfirmedPublished: MAS Defense, MAS DEFENSE 15" NERO M-LOK FREE FLOAT - STEALTH GRAY (MAS00106384), description, the maker, read Oct 28, 2026
Published “The barrel nut will accept a 1 3/16" or (30mm) wrench or crow foot.” used
MAS Defense, MAS DEFENSE 15" NERO M-LOK FREE FLOAT - STEALTH GRAY (MAS00106384), description, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Room inside an M-LOK face for an accessory's nuts (from the face in to what runs under it)No value yetMissingNo source yet
Depends on the barrel and the gas block under it, other parts: no figure.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- MAS Defense $89.99 Black Nov 21, 2026, in stock that day
- MAS Defense $104.99 Stealth Gray (Cerakote) Nov 21, 2026, in stock that day
- MAS Defense $104.99 (FDE) Flat Dark Earth Nov 21, 2026, in stock that day
- MAS Defense $104.99 Navy Blue (Cerakote) Nov 21, 2026, in stock that day
- MAS Defense $99.99 OD Green (Cerakote, sold as a blem) Nov 21, 2026, out of stock that day