Light
Olight Baldr S BL
Olight's compact pistol light with a blue laser: 800 lumens and a Class IIIa blue laser (440 to 460 nm) out of one light cup, on a built-in 380 mAh battery charged by its magnetic cable. Its patented slide rail mount clamps a Picatinny rail or a Glock's by the insert fitted, with a locking swing arm. Black (BALDRSBLBK) and desert tan.

- Weight
- 3.35 oz ± 0.005 oz Confirmedpublished: Olight, Baldr S BL Tactical Light - Unique Blue Laser for Target (blog), the maker, read Nov 6, 2026
- Lowest price
- $115.49 at AR15Discounts, read Nov 20, 2026 (Black)
- Maker's number
- BALDRSBLBK
- Colours
- Black, Desert Tan
- Drawn as
- modelled
- Maker's page
- olight.com
Added to “22RB .22 LR rifle”, a build on the start page, where the designer starts a new light.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length2.48 in ± 0.02 in 63 mmConfirmedPublished: Olight, Baldr S BL Tactical Light - Unique Blue Laser for Target (blog), the maker, read Nov 6, 2026
Published “Length: 2.48in/63mm” used
Olight, Baldr S BL Tactical Light - Unique Blue Laser for Target (blog), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “Length: 2.48"”
Blackstone Shooting, Olight Baldr S, 800 Lumens White LED, Blue Laser, Black Anodized (6972378125552), a seller, read Nov 6, 2026 the page, harvested Nov 6, 2026
The maker's figure, given in millimetres first: its ± is half a millimetre. The seller's is the same inches.
Olight's 2.48 in is its 63 mm converted. Which ends it is taken between isn't said: the body's rear face to the head's front face (the slide rail mount is set on the body's top and slides along it, so where it stands isn't in a fixed length).
Head (bezel) diameter0.846 in ± 0.01 in 21.5 mmProvisionalPhoto: Blackstone: the side view
Photo 0.846 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in (profiles.side). Read by profiles.side: the head's top and bottom edges, 0.552 and 1.398 below the jaws' tops, x 2.18 to 2.33
The round head round the light cup (Olight: "LED white light, blue laser output from the same light cup mouth": one opening for both, the laser's window a small disc at the top of the reflector in the front view, DLT c8ea1d0e142d). Olight's "Head Diameter: 1.28in/32.5mm" is not the head's: it is the light's overall width with the swing arm's knob (the front view, DLT c8ea1d0e142d: 472 px across the knob and the far jaw for 530 px from the jaws' tops to the body's foot, 0.89 of the height, as 32.5 is of 36 mm; the head itself is 340 px across there), and it is kept as `width`. The head's own diameter is read on the side view.
Overall height, from the body's foot to the clamp's jaws1.42 in ± 0.02 in 36.1 mmConfirmedPublished: Olight, Baldr S BL Tactical Light - Unique Blue Laser for Target (blog), the maker, read Nov 6, 2026
Published “Body Diameter: 1.42in/36mm” used
Olight, Baldr S BL Tactical Light - Unique Blue Laser for Target (blog), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “Height: 1.4"”
Blackstone Shooting, Olight Baldr S, 800 Lumens White LED, Blue Laser, Black Anodized (6972378125552), a seller, read Nov 6, 2026 the page, harvested Nov 6, 2026
The maker's figure in millimetres; the seller's is it rounded to a tenth.
Olight calls it "Body Diameter"; Blackstone's page for the same light calls it "Height: 1.4"". It is the whole light's height, from the body's underside (its face away from the rail) to the tops of the clamp's jaws: on the straight side view (Blackstone f1a41bae1594) the outline is 1355 px tall for 2375 px long, 0.571 of its length, as 36 mm is of 63 mm (0.571); the body alone is 0.60 of that.
Overall width (with its mount and switch)1.28 in ± 0.02 in 32.5 mmConfirmedPublished: Olight, Baldr S BL Tactical Light - Unique Blue Laser for Target (blog), the maker, read Nov 6, 2026
Published “the Head Diameter: 1.28in/32.5mm” used
Olight, Baldr S BL Tactical Light - Unique Blue Laser for Target (blog), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “Width: 1.28"”
Blackstone Shooting, Olight Baldr S, 800 Lumens White LED, Blue Laser, Black Anodized (6972378125552), a seller, read Nov 6, 2026 the page, harvested Nov 6, 2026
The maker's figure in millimetres, named by it the head's diameter; the seller's is the same inches, named the width.
Across the swing arm's knob (on the light's +z side, beside the clamp) and the far jaw: Olight's "Head Diameter" and Blackstone's "Width" (see head_diameter for why it isn't the head's).
The clamp's rear end (its near plate's rear face), ahead of the light's rear end1.195 in ± 0.01 in 30.4 mmProvisionalPhoto: Blackstone: the side view, 2500 x 1438
Photo 1.195 in ± 0.01 in used
Blackstone: the side view, 2500 x 1438, harvested
Scale: olight-baldr-s-bl.length and .overall_height on the outline's extents (956.7 px/in). Read by profiles.side: the plate's rear face, x 1.193 to 1.207 where it rises from the rear block to the jaws' tops
The clamp's front end (its near plate's front face), ahead of the light's rear end2.084 in ± 0.01 in 52.9 mmProvisionalPhoto: Blackstone: the side view, 2500 x 1438
Photo 2.084 in ± 0.01 in used
Blackstone: the side view, 2500 x 1438, harvested
Scale: 956.7 px/in (profiles.side). Read by profiles.side: the plate's front face, x 2.083 to 2.085 from the jaws' tops down to 0.22 in
The rail's face (the channel's floor, where the rail's top bears) below the jaws' tops0.16 in ± 0.02 in 4.1 mmProvisionalPhoto: DLT Trading: the front view, 1000 x 666
Photo 0.16 in ± 0.02 in used
DLT Trading: the front view, 1000 x 666, harvested
Scale: olight-baldr-s-bl.width and .overall_height on the outline's extents (372.2 px/in, agreeing within 0.2%: profiles.front). Read by profiles.front: the mount's top beside each jaw's inner wall, 0.157 to 0.164 below the jaws' tops (0.005 and 0.000)
The jaws reach this far past the rail's face: a hair past the standard's lower gauge line (0.154), as a clamp that holds the head under its widest must. The front view is taken from a little above, so a floor seen there reads a little high; the insert's top reads 0.117 in (it stands up into the rail's slot).
The body's rear face (behind it the rear switch), ahead of the light's rear end0.338 in ± 0.01 in 8.6 mmProvisionalPhoto: Blackstone: the side view
Photo 0.338 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in (profiles.side). Read by profiles.side: the body's rear edge, x 0.336 to 0.340 between depths 0.65 and 1.35
Where the body meets the head, ahead of the light's rear end2.11 in ± 0.02 in 53.6 mmProvisionalPhoto: Blackstone: the side view
Photo 2.11 in ± 0.02 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in (profiles.side). Read by the body's front corner above the head (x 2.106, depth 0.513) and the line where its flat side ends (u 2060 px)
The body's top (the face the slide rail mount sits on) below the jaws' tops0.513 in ± 0.01 in 13 mmProvisionalPhoto: Blackstone: the side view
Photo 0.513 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in (profiles.side). Read by profiles.side: the body's top edge ahead of the mount, x 2.106 to 2.13, and behind it at x 0.556 to 0.576
The head's axis below the jaws' tops0.975 in ± 0.01 in 24.8 mmProvisionalPhoto: Blackstone: the side view
Photo 0.975 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in (profiles.side). Read by midway between the head's top and bottom edges on profiles.side (0.552 and 1.398, x 2.18 to 2.33)
The head's axis above the mounting face (the rail's face)0.815 in ± 0.03 in 20.7 mmProvisionalWorked out: The head's axis on the side view less the rail's face below the jaws' tops on the front view.
Worked out 0.815 in ± 0.03 in used
The head's axis on the side view less the rail's face below the jaws' tops on the front view., harvested
The body's width across1.1 in ± 0.04 in 27.9 mmCorroboratedPhoto: DLT Trading: the front view
Photo 1.1 in ± 0.04 in used
DLT Trading: the front view, harvested
Scale: the body's own height on the side view (0.903 in, depth 0.513 to 1.416). Read by profiles.front: the body 1.053 across (z 0.030 to 1.083) for 0.864 tall (0.556 to 1.420): 1.219 times its height, at the side view's height. The ± covers the close photo's perspective between the body's front end and the jaws.
Photo 1.06 in ± 0.04 in
DLT Trading: the light from its foot, the lens down, 1270 x 846, harvested
Scale: the head's diameter (head_diameter, 0.846 in): 250 px across in the same view. Read by the body 313 px across (512 to 825) at mid-length; the view's lengths are foreshortened (its scale along the light runs 237 to 270 px/in from the rear to the head), so the width is scaled by the head's width beside it
The front view's reading, with which the knob and the far jaw come to the published overall width (1.28); the view from the foot, scaled by the head beside the body, agrees within the two ±.
The lens across (the reflector's opening inside the bezel)0.635 in ± 0.03 in 16.1 mmProvisionalPhoto: DLT Trading: the front view
Photo 0.635 in ± 0.03 in used
DLT Trading: the front view, harvested
Scale: the head's diameter (head_diameter): its bezel ring 340 px across. Read by the reflector's bright disc 255 px across inside the 340 px ring: 0.75 of the head
The laser's window across (a dark disc at the top of the reflector)0.124 in ± 0.02 in 3.1 mmProvisionalPhoto: DLT Trading: the front view
Photo 0.124 in ± 0.02 in used
DLT Trading: the front view, harvested
Scale: the head's ring 340 px across (head_diameter). Read by the dark disc at (460, 325) px, 50 px across
The laser's window's centre above the head's axis (toward the rail)0.261 in ± 0.02 in 6.6 mmProvisionalPhoto: DLT Trading: the front view
Photo 0.261 in ± 0.02 in used
DLT Trading: the front view, harvested
Scale: the head's ring 340 px across (head_diameter). Read by the disc's centre 105 px above the ring's (470, 430)
Each jaw's thickness across0.15 in ± 0.02 in 3.8 mmProvisionalPhoto: DLT Trading: the front view
Photo 0.15 in ± 0.02 in used
DLT Trading: the front view, harvested
Scale: the body's width (body_width) on the same view. Read by profiles.front: the far jaw z 0.056 to 0.199 and the near 0.908 to 1.067 (0.143 and 0.159 in the view's units), times the body's 1.10 over its 1.053
The swing arm's knob across (on the light's +z side)0.29 in ± 0.03 in 7.4 mmProvisionalPhoto: DLT Trading: the front view
Photo 0.29 in ± 0.03 in used
DLT Trading: the front view, harvested
Scale: body_width on the same view. Read by profiles.front: the knob from 0.199 to 0.478 below the jaws' tops (0.279), times 1.045
How far the knob stands out from the mount's side0.205 in ± 0.03 in 5.2 mmProvisionalPhoto: DLT Trading: the front view
Photo 0.205 in ± 0.03 in used
DLT Trading: the front view, harvested
Scale: body_width on the same view. Read by profiles.front: the knob's outer face at z 1.279 against the mount's side at 1.069 to 1.083, times 1.045
The clamp's slotted screw (on its -z plate) ahead of the light's rear end1.476 in ± 0.01 in 37.5 mmProvisionalPhoto: Blackstone: the side view
Photo 1.476 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in. Read by the screw head's centre at (1450, 355) px; 0.337 in below the jaws' tops
The slotted screw's centre below the jaws' tops0.337 in ± 0.01 in 8.6 mmProvisionalPhoto: Blackstone: the side view
Photo 0.337 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in. Read by the screw head's centre at (1450, 355) px
The slotted screw's head across0.2 in ± 0.01 in 5.1 mmProvisionalPhoto: Blackstone: the side view
Photo 0.2 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in. Read by the head 190 px across (1355 to 1545)
The laser's windage screw (L/R) ahead of the light's rear end, on the -z side1.23 in ± 0.01 in 31.2 mmProvisionalPhoto: Blackstone: the side view
Photo 1.23 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in. Read by the hole's centre at (1215, 755) px
The laser's elevation screw (U/D) ahead of the light's rear end, on the -z side1.49 in ± 0.01 in 37.8 mmProvisionalPhoto: Blackstone: the side view
Photo 1.49 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in. Read by the hole's centre at (1465, 755) px
The two adjusting screws' centres below the jaws' tops0.755 in ± 0.01 in 19.2 mmProvisionalPhoto: Blackstone: the side view
Photo 0.755 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in. Read by both holes' centres at v 755 px
The adjusting screws' holes across0.125 in ± 0.01 in 3.2 mmProvisionalPhoto: Blackstone: the side view
Photo 0.125 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in. Read by each hole's dark ring 120 px across
The rear switch's ribbed paddle across0.935 in ± 0.04 in 23.7 mmProvisionalWorked out: The view from the foot (DLT abe200dcde6b): the paddle 265 px across (535 to 800) of the body's 313 there, 0.85 of the body's width.
Worked out 0.935 in ± 0.04 in used
The view from the foot (DLT abe200dcde6b): the paddle 265 px across (535 to 800) of the body's 313 there, 0.85 of the body's width., harvested
The magnetic charging contact's centre on the foot, ahead of the light's rear end1.224 in ± 0.04 in 31.1 mmProvisionalPhoto: DLT Trading: the light from its foot
Photo 1.224 in ± 0.04 in used
DLT Trading: the light from its foot, harvested
Scale: the body's rear face and its front end on the foot's outline (245 and 680 px) at body_rear_x and body_front_x. Read by the gold contact's centre at (668, 462) px, 0.499 of the way from the rear face to the head; on the body's middle across (668.5)
The magnetic charging contact (the gold disc) across0.19 in ± 0.02 in 4.8 mmProvisionalPhoto: DLT Trading: the light from its foot
Photo 0.19 in ± 0.02 in used
DLT Trading: the light from its foot, harvested
Scale: the head's diameter, 250 px across in the same view. Read by the disc 56 px across
The ring round the charging contact across (where the magnetic cable's head sits)0.71 in ± 0.03 in 18 mmProvisionalPhoto: DLT Trading: the light from its foot
Photo 0.71 in ± 0.03 in used
DLT Trading: the light from its foot, harvested
Scale: the head's diameter, 250 px across in the same view. Read by the ring's outer edge 210 px across (563 to 773)
How far the Picatinny insert's cross key stands up from the channel's floor into the rail's slot0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the insert's top reads 0.043 above the floor in the front view (0.117 against 0.160 below the jaws' tops), which a view from a little above lifts; under the standard's slot depth (0.118).
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: the insert's top reads 0.043 above the floor in the front view (0.117 against 0.160 below the jaws' tops), which a view from a little above lifts; under the standard's slot depth (0.118)., harvested
How far the lens stands behind the bezel's front face0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the reflector's depth isn't given; the glass is set back from the bezel's face as the front-left views show it.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: the reflector's depth isn't given; the glass is set back from the bezel's face as the front-left views show it., harvested
How deep the adjusting screws' holes are drawn0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the screws sit inside their holes; how far isn't seen.
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: the screws sit inside their holes; how far isn't seen., harvested
The swing arm's lever (on the +z side, behind the knob) its rear end, ahead of the light's rear end0.577 in ± 0.01 in 14.7 mmProvisionalPhoto: Blackstone: the side view
Photo 0.577 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in (profiles.side). Read by profiles.side: the block's rear face, x 0.575 to 0.580
The lever stands behind the mount on the far side of the side view, black, and its silhouette is the side outline's lower block above the body's rear half (u 590 to 1180 px, its top at depth 0.19): AR15Discounts' photograph of the tan light from its +z side (7b0dbbc5cfe8) has the ribbed black lever there, from the knob back, rising to about the jaws' tops.
The lever's edge toward the rail, below the jaws' tops0.19 in ± 0.01 in 4.8 mmProvisionalPhoto: Blackstone: the side view
Photo 0.19 in ± 0.01 in used
Blackstone: the side view, harvested
Scale: 956.7 px/in (profiles.side). Read by profiles.side: the block's top edge, 0.171 to 0.214 (x 0.58 to 1.16)
The lever's plate thickness across0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view shows the lever square across; in the front view it is inside the knob's 0.205 in out from the mount's side, behind the knob.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: no view shows the lever square across; in the front view it is inside the knob's 0.205 in out from the mount's side, behind the knob., harvested
The ring's groove, across and deep0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the ring reads as a bright line some 6 px wide in the view from the foot (0.02 in), a cut edge catching the light; how deep it goes isn't seen and it is drawn as deep as it is wide.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: the ring reads as a bright line some 6 px wide in the view from the foot (0.02 in), a cut edge catching the light; how deep it goes isn't seen and it is drawn as deep as it is wide., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $115.49 Black Nov 20, 2026, stock not said
- AR15Discounts $116.99 Desert Tan Nov 21, 2026, stock not said