Upper
Aero Precision M4E1 Enhanced Upper Receiver Stripped
Aero Precision's M4E1 Enhanced stripped upper: "a one-piece design combining the handguard mounting platform with the upper itself", "Machined from 7075-T6 forged aluminum", "M4 Feedramps", ".250 takedown pin holes". "Handguard mounting platform is forged into the receiver"; "Compatible with Aero Precision Enhanced and Quantum Series handguards but also fits most BAR-system handguards"; "Works with standard AR15/M16 components". Sold without a port door, a forward assist or a barrel nut ("NOTE: This Upper Receiver will NOT ship with a barrel nut.").

- Weight
- 9.99 oz ± 1 oz Provisionalworked out: {.weight_as_metal}
- Lowest price
- $194.99 at Aero Precision, read Nov 21, 2026 (Anodized Black)
- Maker's number
- APAR600201C
- Colours
- Anodized Black, FDE Cerakote
- Drawn as
- modelled
- Maker's page
- aeroprecisionusa.com
In “Aero M4E1 Enhanced, pencil barrel”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
A seller's weight for the blemished stripped receiver's listing (not this number's; beside a carton's dimensions)12 oz ± 0.5 ozProvisionalPublished: AR15Discounts, APAR600201BC - Aero Precision M4E1 Enhanced Stripped Upper Receiver - Anodized Black - BLEM, Specifications, a seller, read Oct 12, 2026
Published “Weight: 12 oz” used
AR15Discounts, APAR600201BC - Aero Precision M4E1 Enhanced Stripped Upper Receiver - Anodized Black - BLEM, Specifications, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
The same page: "Dimensions: 10.6″ L x 2.6″ W x 3.9″ H", longer than the receiver: the listing's shipping figures. Kept as what a page says, and not the part's weight.
What the stripped receiver would weigh by its own metal: the M4E1 Threaded receiver's published weight and the platform9.99 oz ± 1 ozProvisionalWorked out: {aero-m4e1-threaded-upper.weight} + 0.785398163 * (({.platform_od} * {.platform_od} - {.platform_bore_d} * {.platform_bore_d}) * ({.platform_front_x} - {.front_face_x}) + ({.platform_od} * {.platform_od} - {.bore_d} * {.bore_d}) * ({.front_face_x} - {.shoulder_x})) * {std.density.aluminium_7075}
Worked out 9.99 oz ± 1 oz used
{aero-m4e1-threaded-upper.weight} + 0.785398163 * (({.platform_od} * {.platform_od} - {.platform_bore_d} * {.platform_bore_d}) * ({.platform_front_x} - {.front_face_x}) + ({.platform_od} * {.platform_od} - {.bore_d} * {.bore_d}) * ({.front_face_x} - {.shoulder_x})) * {std.density.aluminium_7075}, harvested
Worked out, and not the part's weight (no page gives one): Aero's 6.9 oz for the M4E1 Threaded stripped receiver plus the platform as a ring of 7075 (Aero: "Machined from 7075-T6 forged aluminum") of its read sizes, solid over the bore from the shoulder to the barrel's seat and bored for the nut ahead of it. The Threaded receiver's own barrel-nut thread (about a third of an ounce) isn't taken off, nor the platform's grooves and screw holes, and the two forgings may differ elsewhere: good to an ounce. Aero's assembled M4E1 Enhanced upper without a forward assist (APAR612201AC), with a port door and a barrel nut on it, is 11.28 oz.
Bore axis above the takedown pin centre0.877 in ± 0.0015 in 22.3 mmConfirmedWorked out: {std.ar15.bore_axis_y}
Worked out 0.8775 in ± 0.0015 in used
{std.ar15.bore_axis_y}, harvested
The standard's: Aero's page says it "Works with standard AR15/M16 components". This receiver's own platform is centred 0.875 above its pin line on its photo (platform_od).
The top rail's surface above the pin line2.09 in ± 0.02 in 53.1 mmCorroboratedWorked out: {aero-m4e1-threaded-upper.rail_top_above_pin}
Photo 2.088 in ± 0.02 in
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the rail's tooth tops (the silhouette's highest, rows 452 to 456) above the line through the two holes; ± is two pixels and a row
Worked out 2.09 in ± 0.02 in used
{aero-m4e1-threaded-upper.rail_top_above_pin}, harvested
The sibling forging's, read on two photos of its own (corroborated there).
The same forging family's rail, read twice on the Threaded receiver; this receiver's one reading agrees within a tenth of its ±, and its body's heights are the Threaded one's, counted from that figure.
The Threaded receiver's figure is adopted (2026-10-12, at integration): this receiver's own photo reads 2.088, a tenth of its ± under the 2.09 that two photos give the Threaded one; its body under the slots' floors is built on the Threaded receiver's heights (the dovetail's foot, the neck), which are counted from that 2.09, and with the rail's top two thousandths lower the head's lower faces came out 0.0008 in narrow; and its own handguard's rail is level with a receiver's at 2.09 (Aero: "blends seamlessly").
The rearmost rail slot's centre ahead of the takedown pin1.178 in ± 0.01 in 29.9 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 1.178 in ± 0.01 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the top edge's 14 slot floors (their edges at 1.086 and 1.271, ... 6.207 and 6.392): the centres fitted to the standard pitch, 0.3940 in apart
How many rail slots14ProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 14 count used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by counted along the top edge
Behind the first is a solid run of rail over the charging handle's channel (from rail_rear_x); the last tooth ends at the shoulder.
The top rail's head: where it begins ahead of the tongue, X (the app draws the head from here)0.416 in ± 0.006 in 10.6 mmProvisionalWorked out: {std.ar15.rail_tongue_shoulder_x}
Worked out 0.4165 in ± 0.006 in used
{std.ar15.rail_tongue_shoulder_x}, from the site owner
Until 2026-10-20 this was the rail's rearmost point (now rail_tongue_rear_x), and the app drew the head at its full width from there, square: the charging handle's T, cut round for a rounded rail end, stood in its corners. Behind this the rail is the standard's tongue (std.ar15.rail_tongue_*), which the receiver's model carries, as the 22RB's does.
The top rail's tongue: its rounded end's rearmost point, X ahead of the takedown pin-0.6 in ± 0.01 in -15.2 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo -0.6 in ± 0.01 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by where the top edge first reaches the teeth's height, column 182
The top rail's front end ahead of the takedown pin6.591 in ± 0.011 in 167.4 mmConfirmedWorked out: {.shoulder_x}
Worked out 6.591 in ± 0.011 in used
{.shoulder_x}, harvested
Photo 6.599 in ± 0.01 in
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the last tooth's front, columns 1505 to 1506: the receiver body's front shoulder, where the top drops to the platform
One face with the shoulder, which is taken at the standard's place; the photo reads the last tooth's front 0.008 in ahead of it, inside its ±.
The rail ends on the receiver body's front shoulder: one face, where an Enhanced handguard's own rail meets it and carries on. Ahead of it is the platform, lower.
The receiver's rear face behind the takedown pin (negative)-0.621 in ± 0.005 in -15.8 mmConflictWorked out: {std.ar15.upper_rear_face_x}
Worked out -0.621 in ± 0.005 in used
{std.ar15.upper_rear_face_x}, harvested
The Army's drawing of the upper (8448524): Aero's "Works with standard AR15/M16 components".
Photo -0.654 in ± 0.025 in
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the silhouette's rear end behind the takedown hole's centre, column 172; ± is two pixels and what a near edge reads long
The drawing dimensions the face; the photo reads 0.03 in more, as a silhouette's near edge does (the M4E1 Threaded receiver's two photos read 0.02 more).
standard and right differ by 0.033 in beyond what each states it is good to.
Where a barrel extension's flange seats, inside the platform, ahead of the takedown pin7.036 in ± 0.005 in 178.7 mmConfirmedWorked out: {std.ar15.upper_front_face_x}
Worked out 7.036 in ± 0.005 in used
{std.ar15.upper_front_face_x}, harvested
The Army's drawing puts a receiver's front face (the end of its barrel-nut thread, where the flange seats) .661 ahead of the pivot lug's hole. This receiver has no such thread; the barrel still has to stand where the standard's bolt carrier and magazine meet it (Aero: "Works with standard AR15/M16 components", "M4 Feedramps"), so the seat is taken at the standard's place. It is inside the platform and in no photo on file.
The receiver body's front shoulder, where the platform begins and a handguard's rail meets the receiver's, ahead of the takedown pin6.591 in ± 0.011 in 167.4 mmConfirmedWorked out: {std.ar15.upper_front_face_x} - {std.ar15.upper_barrel_thread_length}
Worked out 6.591 in ± 0.011 in used
{std.ar15.upper_front_face_x} - {std.ar15.upper_barrel_thread_length}, harvested
Where a mil-spec receiver's body ends and its barrel-nut thread begins (the Army's .445 REF behind its front face).
Photo 6.597 in ± 0.012 in
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the body's front face above the platform (rows 452 to 508: columns 1503 to 1505) and below it (rows 844 to 852: 1503 to 1504); ± is two pixels
The standard's place for it, which the handguard and the BAR nut are made to; this receiver's own photo reads 0.006 in more, inside its ±.
This receiver's own photo has its shoulder where the standard's is, within a pixel: Aero's BAR barrel nut puts the same platform on a standard receiver from that shoulder forward, and one handguard goes on both.
The receiver's underside above the pin line0.248 in ± 0.0015 in 6.3 mmConfirmedWorked out: {std.ar15.deck_y}
Worked out 0.2485 in ± 0.0015 in used
{std.ar15.deck_y}, harvested
It sits on the lower's deck.
The platform's front face ahead of the takedown pin7.925 in ± 0.02 in 201.3 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 7.925 in ± 0.02 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the silhouette's front between the barrel nut's lugs (rows 600 to 608, 660 to 692, 748 to 752: columns 1748 to 1751)
1.33 in ahead of the shoulder. In this picture a barrel nut stands in it, its lugs a tenth of an inch proud of the face (to 8.03); Aero's page for this number: "NOTE: This Upper Receiver will NOT ship with a barrel nut."
The platform's diameter (what an Enhanced handguard's barrel nut cut goes over)1.77 in ± 0.02 in 45 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 1.77 in ± 0.02 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by its top (the tops of the teeth between its grooves, rows 511 to 513: 1.768 to 1.774 above the pin line) to its bottom edge (rows 833 to 840 along it: 0.02 above the pin line at its front, 0.02 below at its rear); its middle 0.875 above the pin line, the bore's 0.8775
Round about the bore. Aero's handguard for it is bored 1.78 in there (aero-enhanced-15-handguard.nut_cut_diameter): this reading is a hundredth under that.
The platform's bore at its front, where the barrel nut goes in1.22 in ± 0.04 in 31 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 1.22 in ± 0.04 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the barrel nut's lugs standing out of the front face, from 0.61 above the bore's axis (row 564) to 0.61 below it (row 788)
Read from the barrel nut in the picture, which this number doesn't ship with: the nut's outside, and so the least the bore can be. Its thread isn't drawn.
How many grooves are cut across the top of the platform6ProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 6 count used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by counted along the top edge between the shoulder and the front face
The rearmost of those grooves, its middle ahead of the takedown pin6.722 in ± 0.01 in 170.7 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 6.722 in ± 0.01 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by its two walls at 6.670 and 6.773 (columns 1518 and 1537)
Those grooves' pitch0.202 in ± 0.003 in 5.1 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 0.2016 in ± 0.003 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by six grooves' middles, 6.722 to 7.729
Those grooves' width along the platform0.1 in ± 0.01 in 2.5 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 0.1 in ± 0.01 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by each groove's two walls: 0.093 to 0.104
Those grooves' depth below the platform's top0.125 in ± 0.015 in 3.2 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 0.125 in ± 0.015 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by their floors at 1.643 to 1.649 above the pin line against the teeth's tops at 1.768 to 1.774
The platform's rear screw holes, their centres ahead of the takedown pin7.341 in ± 0.015 in 186.5 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 7.341 in ± 0.015 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the two rear holes' dark centres, the upper at column 1640.1 and the lower at 1641.7
0.75 ahead of the shoulder; an Enhanced handguard's own rear screw holes stand 0.71 ahead of where its rail meets the receiver, by its own photo.
The front screw holes ahead of the rear ones0.414 in ± 0.01 in 10.5 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 0.414 in ± 0.01 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the upper pair's dark centres 75.2 px apart, the lower pair's 77.0
The upper screw holes above the bore's level (and the lower ones below it)0.616 in ± 0.015 in 15.6 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 0.6155 in ± 0.015 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the upper pair's centres at row 562.8, 1.493 above the pin line; the lower pair's at about row 791 (0.25), seen from further round
On a round of this diameter that is 44 degrees up from the bore's level: the eight holes stand at the four diagonals, two along each.
A screw hole in the platform, across0.1 in ± 0.02 in 2.5 mmProvisionalPhoto: AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C
Photo 0.1 in ± 0.02 in used
AR15Discounts 324831.png: the M4E1 Enhanced stripped upper's right side, straight on, 1920 x 1280; the same picture as Aero's own of APAR600201C, harvested
Scale: its own takedown and pivot lug holes as the pins (centres at px 292.09, 835.76 and 1463.51, 836.85), std.ar15.pin_spacing apart: 183.75 px/in, tilt 0.05 degrees; its rail's 14 slots fit the standard pitch to 0.1% in that frame. Read by the upper holes' dark openings, 16 px along the platform (0.087); the lower pair's 18 to 22
How many screw holes the platform has8ConfirmedPublished: Aero Precision, M4E1 Enhanced Upper Receiver Stripped - Anodized Black (APAR600201C), Details, the maker, read Oct 12, 2026
Published “we have condensed the parts needed to mount a free-floated handguard to a mere 8 screws” used
Aero Precision, M4E1 Enhanced Upper Receiver Stripped - Anodized Black (APAR600201C), Details, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Four show on its right side, two above and two below; the left side's four are in Aero's views of the assembled one.
Width of the receiver's body1.18 in ± 0.02 in 30 mmConfirmedWorked out: {aero-m4e1-threaded-upper.width}
Worked out 1.18 in ± 0.02 in used
{aero-m4e1-threaded-upper.width}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The charging handle's channel above the bore's axis0.856 in ± 0.007 in 21.8 mmConfirmedWorked out: {aero-m4e1-threaded-upper.charging_handle_above_bore}
Worked out 0.8563 in ± 0.007 in used
{aero-m4e1-threaded-upper.charging_handle_above_bore}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The charging handle's seat: the front wall of the open notch under the rail's rear end, ahead of the takedown pin0.092 in ± 0.02 in 2.3 mmCorroboratedWorked out: {aero-m4e1-threaded-upper.handle_seat_x}
Worked out 0.092 in ± 0.02 in used
{aero-m4e1-threaded-upper.handle_seat_x}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The round body's radius about the bore (the forging's)0.59 in ± 0.01 in 15 mmConfirmedWorked out: {aero-m4e1-threaded-upper.body_radius}
Worked out 0.59 in ± 0.01 in used
{aero-m4e1-threaded-upper.body_radius}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The bore the bolt carrier runs in1 in ± 0.005 in 25.4 mmConfirmedWorked out: {aero-m4e1-threaded-upper.bore_d}
Worked out 1 in ± 0.005 in used
{aero-m4e1-threaded-upper.bore_d}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The rail's dovetail, its foot (where the neck begins), Y above the pin line1.885 in ± 0.003 in 47.9 mmCorroboratedWorked out: {aero-m4e1-threaded-upper.dovetail_foot_y}
Worked out 1.885 in ± 0.003 in used
{aero-m4e1-threaded-upper.dovetail_foot_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The rail's dovetail at its foot, half its width0.323 in ± 0.013 in 8.2 mmCorroboratedWorked out: {aero-m4e1-threaded-upper.dovetail_foot_half_width}
Worked out 0.323 in ± 0.013 in used
{aero-m4e1-threaded-upper.dovetail_foot_half_width}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The rail's neck below its dovetail, half its width0.309 in ± 0.003 in 7.8 mmProvisionalWorked out: {aero-m4e1-threaded-upper.rail_neck_half_width}
Worked out 0.309 in ± 0.003 in used
{aero-m4e1-threaded-upper.rail_neck_half_width}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The rail's neck, where it meets the body below it, Y1.737 in ± 0.02 in 44.1 mmProvisionalWorked out: {aero-m4e1-threaded-upper.rail_neck_bottom_y}
Worked out 1.737 in ± 0.02 in used
{aero-m4e1-threaded-upper.rail_neck_bottom_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The body's upper sides, below the rail's neck: half the width across them0.42 in ± 0.04 in 10.7 mmProvisionalWorked out: {aero-m4e1-threaded-upper.side_half_width}
Worked out 0.42 in ± 0.04 in used
{aero-m4e1-threaded-upper.side_half_width}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The body's upper sides, their lower edge (where the face that slopes out begins), Y1.435 in ± 0.03 in 36.4 mmCorroboratedWorked out: {aero-m4e1-threaded-upper.side_bottom_y}
Worked out 1.435 in ± 0.03 in used
{aero-m4e1-threaded-upper.side_bottom_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The sloped faces' lower edge, where the body is widest, Y0.875 in ± 0.02 in 22.2 mmProvisionalWorked out: {aero-m4e1-threaded-upper.shoulder_bottom_y}
Worked out 0.875 in ± 0.02 in used
{aero-m4e1-threaded-upper.shoulder_bottom_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The walls below the round body down to the underside, half the width0.453 in ± 0.003 in 11.5 mmProvisionalWorked out: {aero-m4e1-threaded-upper.lug_wall_half_width}
Worked out 0.453 in ± 0.003 in used
{aero-m4e1-threaded-upper.lug_wall_half_width}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The ejection port's length3.125 in ± 0.005 in 79.4 mmProvisionalWorked out: {aero-m4e1-threaded-upper.port_length}
Worked out 3.125 in ± 0.005 in used
{aero-m4e1-threaded-upper.port_length}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The ejection port's front end ahead of the takedown pin6.036 in ± 0.01 in 153.3 mmProvisionalWorked out: {aero-m4e1-threaded-upper.port_front_x}
Worked out 6.036 in ± 0.01 in used
{aero-m4e1-threaded-upper.port_front_x}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The port's lower edge above the pin line, seen from the side (its ends R .25: 0.50 high)0.841 in ± 0.01 in 21.4 mmProvisionalWorked out: {aero-m4e1-threaded-upper.port_bottom_y}
Worked out 0.841 in ± 0.01 in used
{aero-m4e1-threaded-upper.port_bottom_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The port's ends' radius (half its height from the side)0.25 in ± 0.005 in 6.3 mmConfirmedWorked out: {aero-m4e1-threaded-upper.port_end_r}
Worked out 0.25 in ± 0.005 in used
{aero-m4e1-threaded-upper.port_end_r}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist's axis, turned inward toward the front in plan20° ± 1°ProvisionalWorked out: {aero-m4e1-threaded-upper.fa_axis_angle}
Worked out 20 deg ± 1 deg used
{aero-m4e1-threaded-upper.fa_axis_angle}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist's bore0.509 in ± 0.003 in 12.9 mmConfirmedWorked out: {aero-m4e1-threaded-upper.fa_bore_d}
Worked out 0.509 in ± 0.003 in used
{aero-m4e1-threaded-upper.fa_bore_d}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist's bore, how deep its .509 runs from the housing's rear face0.65 in ± 0.01 in 16.5 mmConfirmedWorked out: {aero-m4e1-threaded-upper.fa_bore_depth}
Worked out 0.65 in ± 0.01 in used
{aero-m4e1-threaded-upper.fa_bore_depth}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist's inner bore, ahead of the .5090.315 in ± 0.001 in 8 mmConfirmedWorked out: {aero-m4e1-threaded-upper.fa_inner_bore_d}
Worked out 0.315 in ± 0.001 in used
{aero-m4e1-threaded-upper.fa_inner_bore_d}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist bore's rear opening, X-0.395 in ± 0.005 in -10 mmCorroboratedWorked out: {aero-m4e1-threaded-upper.fa_rear_x}
Worked out -0.395 in ± 0.005 in used
{aero-m4e1-threaded-upper.fa_rear_x}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist bore's rear opening, out from the middle (Z)1.09 in ± 0.005 in 27.7 mmProvisionalWorked out: {aero-m4e1-threaded-upper.fa_rear_z}
Worked out 1.09 in ± 0.005 in used
{aero-m4e1-threaded-upper.fa_rear_z}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist housing's radius about its axis (the forging's)0.313 in ± 0.003 in 7.9 mmProvisionalWorked out: {aero-m4e1-threaded-upper.fa_housing_r}
Worked out 0.3125 in ± 0.003 in used
{aero-m4e1-threaded-upper.fa_housing_r}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist housing's front end, X1.9 in ± 0.05 in 48.3 mmProvisionalWorked out: {aero-m4e1-threaded-upper.fa_housing_front_x}
Worked out 1.9 in ± 0.05 in used
{aero-m4e1-threaded-upper.fa_housing_front_x}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist housing's outer face at the receiver's rear, out from the middle (Z)1.67 in ± 0.1 in 42.4 mmProvisionalWorked out: {aero-m4e1-threaded-upper.fa_housing_out_rear}
Worked out 1.67 in ± 0.1 in used
{aero-m4e1-threaded-upper.fa_housing_out_rear}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist housing's outer face, its upper edge (where the face that slopes down from the body meets it), Y1.2 in ± 0.03 in 30.5 mmProvisionalWorked out: {aero-m4e1-threaded-upper.fa_housing_outer_top_y}
Worked out 1.2 in ± 0.03 in used
{aero-m4e1-threaded-upper.fa_housing_outer_top_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The forward assist housing's outer face, its lower edge (where the face that slopes back in to the body begins), Y0.92 in ± 0.03 in 23.4 mmProvisionalWorked out: {aero-m4e1-threaded-upper.fa_housing_outer_bottom_y}
Worked out 0.92 in ± 0.03 in used
{aero-m4e1-threaded-upper.fa_housing_outer_bottom_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The brass deflector's reach out from the middle (Z)1.47 in ± 0.1 in 37.3 mmProvisionalWorked out: {aero-m4e1-threaded-upper.deflector_out}
Worked out 1.47 in ± 0.1 in used
{aero-m4e1-threaded-upper.deflector_out}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The brass deflector's point (where it reaches furthest out), X2.72 in ± 0.15 in 69.1 mmProvisionalWorked out: {aero-m4e1-threaded-upper.deflector_point_x}
Worked out 2.72 in ± 0.15 in used
{aero-m4e1-threaded-upper.deflector_point_x}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The brass deflector's point (where it reaches furthest out), Y1.16 in ± 0.06 in 29.5 mmProvisionalWorked out: {aero-m4e1-threaded-upper.deflector_point_y}
Worked out 1.16 in ± 0.06 in used
{aero-m4e1-threaded-upper.deflector_point_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder (this file's header).
The cam pin's boss on the left side, its middle, X5.14 in ± 0.02 in 130.6 mmProvisionalWorked out: {aero-m4e1-threaded-upper.cam_boss_x}
Worked out 5.14 in ± 0.02 in used
{aero-m4e1-threaded-upper.cam_boss_x}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): its middle at 340.4 px (its outer face 322.0 to 359.3, its upper edge 312.7 to 368.0, its ends 301.3 to 379.2: all three centred within 0.3 px): 5.11, 0.03 behind the Threaded receiver's, as everything on this wall reads in this photo (the header); from the middle length's rear end it is 1.10 in for that receiver's 1.09.
The cam pin's boss, its upright outer face, half its length0.172 in ± 0.012 in 4.4 mmProvisionalWorked out: {aero-m4e1-threaded-upper.cam_boss_face_half_width}
Worked out 0.172 in ± 0.012 in used
{aero-m4e1-threaded-upper.cam_boss_face_half_width}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): rows 271 to 290: the face's even tone (57 to 60) between an edge line at 322.0 px and the lit end's half level at 359.3: 0.182, a hundredth more.
The cam pin's boss, its outer face's upper edge (and its ends' lower edge), Y1.519 in ± 0.012 in 38.6 mmProvisionalWorked out: {aero-m4e1-threaded-upper.cam_boss_face_top_y}
Worked out 1.519 in ± 0.012 in used
{aero-m4e1-threaded-upper.cam_boss_face_top_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): columns 325 to 356: the lit face above (108 to 123) gives way to the outer face (58 to 61) at 267.1 px: 1.513.
The cam pin's boss, its outer face's lower edge, where it runs out on the body's sloped face, Y1.21 in ± 0.012 in 30.7 mmProvisionalWorked out: {aero-m4e1-threaded-upper.cam_boss_bottom_y}
Worked out 1.21 in ± 0.012 in used
{aero-m4e1-threaded-upper.cam_boss_bottom_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): columns 325 to 356: the outer face (57 to 61) gives way to the lit sloped face (100) at 299.5 px: 1.198.
The cam pin's boss, its upper edge on the band under the rail, Y1.648 in ± 0.012 in 41.9 mmProvisionalWorked out: {aero-m4e1-threaded-upper.cam_boss_top_y}
Worked out 1.648 in ± 0.012 in used
{aero-m4e1-threaded-upper.cam_boss_top_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): columns 325 to 356: the band (50 to 53) gives way to a lit line (100) at 254.2 px: 1.638.
The cam pin's boss, its upper edge, half its length0.245 in ± 0.015 in 6.2 mmProvisionalWorked out: {aero-m4e1-threaded-upper.cam_boss_top_half_width}
Worked out 0.245 in ± 0.015 in used
{aero-m4e1-threaded-upper.cam_boss_top_half_width}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): row 256: lit from 312.7 to 368.0 px: 0.269, the furthest of these readings from that receiver's (0.024 more; the row is 2 px under the edge, where the ends have begun to spread).
The cam pin's boss, its two ends at their lower edge, half the length between them0.373 in ± 0.015 in 9.5 mmProvisionalWorked out: {aero-m4e1-threaded-upper.cam_boss_ear_half_width}
Worked out 0.373 in ± 0.015 in used
{aero-m4e1-threaded-upper.cam_boss_ear_half_width}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): rows 265 to 274: the lit ends reach 301.3 px ahead and 379.2 behind: 0.379.
The cam pin's boss, how far along the body each flank of its outer face runs before it reaches the band0.135 in ± 0.02 in 3.4 mmProvisionalWorked out: {aero-m4e1-threaded-upper.cam_boss_flank_run}
Worked out 0.135 in ± 0.02 in used
{aero-m4e1-threaded-upper.cam_boss_flank_run}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): row 274, at the sloped face's upper edge: the dark flank ahead of the outer face is 14 px wide: 0.136.
The flat pad low on the left wall, its rear end, X3.077 in ± 0.02 in 78.2 mmProvisionalWorked out: {aero-m4e1-threaded-upper.left_pad_rear_x}
Worked out 3.077 in ± 0.02 in used
{aero-m4e1-threaded-upper.left_pad_rear_x}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): rows 362, 372 and 384: a lit end face begins at 553.5 px at all three and widens downward: 3.04, 0.04 behind that receiver's (the header); from the middle length's rear end it is 0.97 in for that receiver's 0.973.
The flat pad low on the left wall, its front end, X6.202 in ± 0.02 in 157.5 mmProvisionalWorked out: {aero-m4e1-threaded-upper.left_pad_front_x}
Worked out 6.202 in ± 0.02 in used
{aero-m4e1-threaded-upper.left_pad_front_x}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): rows 362 to 384: a dark wedge ahead of the pad ends at 232.8 px in all three (its front edge runs from 229 px at row 362 to 222 at row 384, where that receiver's photo has a band of in-between tone 0.07 in long): 6.16, 0.04 behind that receiver's (the header); from the middle length's rear end it is 2.15 in for that receiver's 2.152.
The flat pad low on the left wall, the upper edge of its front and rear lengths, Y0.662 in ± 0.015 in 16.8 mmProvisionalWorked out: {aero-m4e1-threaded-upper.left_pad_top_y}
Worked out 0.662 in ± 0.015 in used
{aero-m4e1-threaded-upper.left_pad_top_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): columns 260, 300, 340, 370, 480, 500 and 520: a crease (the wall's 58 to 60 falls to 52 to 55 between 355 and 357 px) that the plain wall behind the pad doesn't have (columns 600 and 700): 0.64 to 0.65.
The flat pad low on the left wall, its middle length's rear end, X4.05 in ± 0.015 in 102.9 mmProvisionalWorked out: {aero-m4e1-threaded-upper.left_pad_step_rear_x}
Worked out 4.05 in ± 0.015 in used
{aero-m4e1-threaded-upper.left_pad_step_rear_x}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): rows 362, 372 and 384: a lit end face 453.3 to 457.5 px with a dark line ahead of it, and at row 348 (above the other lengths) the middle length's tone ends at 454.3: 4.00 to 4.01, 0.04 behind that receiver's (the header), the furthest of the places along it.
The flat pad low on the left wall, its middle length's front end, X4.585 in ± 0.015 in 116.5 mmProvisionalWorked out: {aero-m4e1-threaded-upper.left_pad_step_front_x}
Worked out 4.585 in ± 0.015 in used
{aero-m4e1-threaded-upper.left_pad_step_front_x}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): rows 362 to 384: two lit lines at 396 and 400 px, and at rows 348 and 352 (above the other lengths) the middle length's tone begins at 401.7: 4.51 to 4.58; the end is a zone 0.07 in long in this photo, and which line in it is the face's edge isn't told.
The flat pad low on the left wall, its middle length's upper edge, Y0.743 in ± 0.015 in 18.9 mmProvisionalWorked out: {aero-m4e1-threaded-upper.left_pad_step_top_y}
Worked out 0.743 in ± 0.015 in used
{aero-m4e1-threaded-upper.left_pad_step_top_y}, harvested
The M4E1 Threaded receiver's, by reference: the same receiver behind the shoulder. This receiver's own left view (604a860f4080, framed as the comment above this block says): columns 410, 425 and 440: the wall's 58 steps to the middle length's 53 at 347.1 px: 0.734.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver pins
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
Barrel extension
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
Bolt carrier channel
Charging handle channel
- Charging handles
- Aero Precision AR15/M4 5.56 charging handle, BCM Ambidextrous MK2 Charging Handle - Large Latch (5.56mm/.223), Radian Weapons AR-15 / M16 Raptor-LT Ambidextrous Charging Handle, Radian Weapons Raptor Ambidextrous Charging Handle AR15/M16, Radian Weapons Raptor-SD Ambidextrous Charging Handle AR15/M16
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Aero Precision $194.99 Anodized Black Nov 21, 2026, stock not said
- Aero Precision $214.99 FDE Cerakote Nov 21, 2026, stock not said