Barrel
Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel
Faxon's lightest 16 in 5.56 barrel, stripped, in its pencil profile: 4150 CMV, salt-bath QPQ nitride inside and out, 1:8 twist, a mid-length gas port (.081) on a .625 in journal 1.1 in long, an M4 feed ramp extension in black oxide, a 1/2x28 muzzle thread. Faxon: "The lightest AR-15 barrel contour: a .625″ gas journal with the body tapered on both sides of it"; "At 1.20 lb it is Faxon’s lightest 16″ 5.56 barrel." It comes with no gas block, gas tube or muzzle device.

- Weight
- 19.2 oz ± 0.08 oz Confirmedpublished: Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications; its headline: "4150 CMV | QPQ Nitride | 1:8 Twist | 1.20 lb | SKU: 15A58M16NPQ", the maker, read Oct 12, 2026
- Lowest price
- $149.95 at AR15Discounts, read Nov 21, 2026
- Made for
- Cartridge / chamber 5.56 NATO (fires 5.56 NATO and .223 Rem)
- Maker's number
- 15A58M16NPQ
- Colour
- Black nitride
- Drawn as
- modelled
- Maker's page
- faxonfirearms.com
In “Aero M4E1 Enhanced, pencil barrel”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Barrel length as its maker states it16.13 in ± 0.005 in 409.7 mmConfirmedPublished: Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026
Published “Length 16.13″ (16″ nominal)” used
Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Barrel Length 16”
Primary Arms, Faxon Firearms 5.56 AR-15 Barrel - Mid-Length - Pencil - 16" (15A58M16NPQ), Specifications, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
The nominal length, to the inch.
The maker's own, to the hundredth; the seller states the nominal 16.
Faxon states it to the hundredth and calls 16 in the nominal. Between which points isn't said: with the extension's standard half inch behind the barrel's breech end (overall_length), Primary Arms' side photo has the published .625 journal at .6251, the published 1.1 in journal at 1.113 and the published .625 in of thread at .6255, so the 16.13 is taken from the barrel's breech end, inside the extension, to the muzzle (as the Army's drawing dimensions a barrel). Taken from the extension's rear end or from the receiver's face the three would read 3% large or 2% small.
The gas block journal's diameter0.625 in ± 0.001 in 15.9 mmConfirmedPublished: Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026
Published “Gas journal .625″ (.6240–.6247″), 1.1″ long, held within .005″ of the bore” used
Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “.625" gas seat diameter”
Primary Arms, Faxon Firearms 5.56 AR-15 Barrel - Mid-Length - Pencil - 16" (15A58M16NPQ), Features; its Specifications: "Gas Seat Diameter .625", a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Gas Block Diameter : .625"”
Impact Guns, Faxon Firearms Duty Series, 1:8 Twist Barrel, 5.56mm, 16" Pencil Profile (manufacturer number 15A58M16NPQ), Features, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's own, with the limits it is turned to; two sellers state the same.
The catalog's first .625 journal. Faxon: "the .625″ gas journal is turned to .6240–.6247″ and checked with a micrometer on every barrel".
The gas block journal's length1.1 in ± 0.05 in 27.9 mmConfirmedPublished: Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026
Published “Gas journal .625″ (.6240–.6247″), 1.1″ long, held within .005″ of the bore” used
Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “1.1" gas block journal”
Primary Arms, Faxon Firearms 5.56 AR-15 Barrel - Mid-Length - Pencil - 16" (15A58M16NPQ), Features, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Gas Block Journal Length : 1.1"”
Impact Guns, Faxon Firearms Duty Series, 1:8 Twist Barrel, 5.56mm, 16" Pencil Profile (manufacturer number 15A58M16NPQ), Features, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
Worked out 1.113 in ± 0.03 in
{.journal_front_x} - {.journal_rear_x}, harvested
Primary Arms' side photo: the collar's front face to where the barrel begins to narrow.
The maker's own; two sellers state it and the photo reads it within a hundredth and a half.
What a gas block has to fit on: Faxon, "use a block 1″ long or shorter". The model takes the journal's two ends where the photo has them (journal_rear_x, journal_front_x), 1.113 apart.
The gas port's diameter0.081 in ± 0.0005 in 2.1 mmConflictPublished: Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications; its FAQ: "The gas port is reamed to .081″.", the maker, read Oct 12, 2026
Published “Gas system Mid-length; .081″ port, reamed to size” used
Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications; its FAQ: "The gas port is reamed to .081″.", the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “.625" gas seat diameter, .078" gas port, 1.1" gas block journal”
Primary Arms, Faxon Firearms 5.56 AR-15 Barrel - Mid-Length - Pencil - 16" (15A58M16NPQ), Features, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Gas Port Diameter : .078"”
Impact Guns, Faxon Firearms Duty Series, 1:8 Twist Barrel, 5.56mm, 16" Pencil Profile (manufacturer number 15A58M16NPQ), Features, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's own page, which says the figure is from its engineering print and states it three times; the two sellers' .078 is one feed's figure (their feature lists are the same list) and may be an earlier revision's. Three thousandths: nothing drawn or checked turns on it.
faxon and primary-arms differ by 0.003 in beyond what each states it is good to.
faxon and impact-guns differ by 0.003 in beyond what each states it is good to.
Faxon's own page against two sellers' pages: .081 and .078. Both stay. Faxon: "Bore, groove, journal, and port figures are from the Faxon engineering print and inspection sheets for this SKU." and "After nitride, the .081″ gas port is drilled and reamed through the .625″ journal".
The barrel extension's rear end behind the barrel's breech end0.501 in ± 0.01 in 12.7 mmProvisionalWorked out: {std.ar15.barrel_extension_behind_breech}
Worked out 0.501 in ± 0.01 in used
{std.ar15.barrel_extension_behind_breech}, from the site owner
The standard's: the reference CAD set's extension less the Army's .620 tenon (std.ar15.barrel_extension_behind_breech, where both readings and their sources are). Faxon: "M4 feed-ramp barrel extension, black oxide, installed at 150 ft-lb, pinned, and headspaced": a standard extension.
End to end, the extension's rear to the muzzle16.631 in ± 0.012 in 422.4 mmProvisionalWorked out: {.length} + {.extension_behind_breech}
Photo 16.63 in ± 0.06 in
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its gas block journal, 68.45 px across (columns 1170 to 1284, the silhouette at grey 235), as the published .625 (journal_od): 109.52 px/in. Read by its two end faces, each where its rim arc reaches the full height: the rear end at column 87.7 (the tip at 76, a 12 px arc on a radius of 54: the lens saw that end from 12.5° off square), the muzzle at 1909.0 (the tip at 1914.7, a 6 px arc on 26.6: 12°): 1821.3 px. The ± covers a pixel at each face and a pixel of the journal's edges
Worked out 16.631 in ± 0.012 in used
{.length} + {.extension_behind_breech}, harvested
Lengths at the published length's scale, as the catalog's other barrels; the photo by its journal reads the same within a thousandth.
The published length with the standard extension's half inch behind the breech; the photo's own reading, scaled by its journal's published diameter, is the same within a thousandth (the silhouette read at grey 235, where a black part's lit edge is: CLAUDE.md).
The barrel extension's rear end, from the flange's rear face (negative: inside the receiver)-0.976 in ± 0.015 in -24.8 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo -0.976 in ± 0.015 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the rear end's face (column 87.7) to the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height)
The reference CAD set's extension has 0.990 here (1.121 less its 0.131 flange); BCM's reads 0.984 and Geissele's 1.001 by their photos.
The extension flange's front face, ahead of its rear face (the flange's thickness)0.109 in ± 0.012 in 2.8 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 0.109 in ± 0.012 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to where the flange's edge stops being level (column 206.5)
The reference CAD set's flange is 0.131 thick; BCM's reads 0.095 and Geissele's 0.117. Ahead of the face the silhouette's corner is the rim's far arc, seen past the barrel (to column 213).
The barrel extension's flange, its diameter1.163 in ± 0.009 in 29.5 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 1.163 in ± 0.009 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the silhouette's widest, columns 195 to 206: 127.4 px. The ± is a pixel
The silhouette's greatest height, and the traced outline's scale reference. The reference CAD set's flange is 1.170.
The barrel extension's body, its diameter (what goes into the receiver)0.999 in ± 0.001 in 25.4 mmConflictWorked out: {bcm-16-mid-barrel.extension_od}
Worked out 0.999 in ± 0.001 in used
{bcm-16-mid-barrel.extension_od}, from the site owner
The Army's limit on the assembly drawing (8448548: "DIAMETER NOT TO EXCEED .9990 FOR THIS LENGTH AFTER ASSEMBLY AND BEFORE FINISH"), as read for BCM's barrel's ledger, where the drawing and its page are cited.
Photo 0.984 in ± 0.009 in
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the extension's body, columns 90 to 172: 107.75 px. The ± is a pixel
The drawing's limit: the extension goes into a receiver's 1.000 bore. The photo reads a glossy black round a pixel and a half thin.
tdp and photo differ by 0.015 in beyond what each states it is good to.
The photo's reading is 1.5% under the drawing's limit: the extension is black oxide (Faxon), glossier than the nitrided barrel, and a glossy black round reads thin on white (CLAUDE.md). The drawing's figure is what goes into a receiver.
The chamber journal's diameter, ahead of the flange0.98 in ± 0.0005 in 24.9 mmConfirmedPublished: Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026
Published “Profile Pencil: .980″ chamber journal, tapered body behind the gas block, .625″ journal (1.1″ long), tapered from .625″ to .525″ ahead of it, .615″ muzzle shoulder” used
Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Photo 0.973 in ± 0.009 in
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the section ahead of the flange, columns 216 to 280: 106.5 px. The ± is a pixel
The maker's figure, from its print; the photo reads it within a pixel.
Faxon: "a .980″ chamber journal for the extension and barrel nut". The Faxon shield is lasered on it.
Where the chamber journal ends and the barrel begins to narrow, ahead of the extension's face0.794 in ± 0.02 in 20.2 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 0.794 in ± 0.02 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to where the edges leave the level (column 281.5: 106.5 px at 281, 105.9 at 283, then 0.354 px of height a column)
Where the cone ahead of the chamber journal ends and the long taper begins, ahead of the extension's face1.798 in ± 0.03 in 45.7 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 1.798 in ± 0.03 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to where the cone's line meets the long taper's (column 391.5; the corner is blended over 6 px)
The cone is straight: 0.354 px of height a column from column 283 to 386, 10° a side.
The long taper's diameter at its rear end (the body's thickest behind the gas block)0.618 in ± 0.009 in 15.7 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 0.618 in ± 0.009 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the body at column 396: 67.65 px. The taper is straight: 62.9 px at column 752 where a line between its two ends has 62.6. The ± is a pixel
Faxon names the taper and gives it no figures: "tapered body behind the gas block".
Where the long taper ends and the barrel rises to the gas block's collar, ahead of the extension's face8.377 in ± 0.03 in 212.8 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 8.377 in ± 0.03 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to where the edges begin to rise (column 1112: 57.5 px to there, 58.4 at 1116)
The long taper's diameter at its front end (the barrel's thinnest behind the gas block)0.525 in ± 0.009 in 13.3 mmCorroboratedPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 0.525 in ± 0.009 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the body over columns 1100 to 1112: 57.5 px. The ± is a pixel
Photo 0.525 in ± 0.012 in
Faxon's own gallery, 15A58M16NPQ-01: the barrel from the side on white, the muzzle at the right, two award badges under it, 2000 x 2000, harvested
Scale: its gas block journal, 59.1 px across (columns 1154 to 1250, the silhouette at grey 235), as the published .625: 94.6 px/in. Read by the body over columns 1082 to 1094: 49.7 to 50.0 px against the journal's 59.1
The larger photograph; the maker's own picture reads the same.
Here, just behind the collar, is where the photo has the .525 that Faxon's sentence puts ahead of the gas block (see forward_od).
The collar behind the gas block journal, its diameter0.755 in ± 0.009 in 19.2 mmCorroboratedPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 0.755 in ± 0.009 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the collar, columns 1145 to 1162: 82.65 px. The ± is a pixel
Photo 0.751 in ± 0.012 in
Faxon's own gallery, 15A58M16NPQ-01: the barrel from the side on white, the muzzle at the right, two award badges under it, 2000 x 2000, harvested
Scale: its gas block journal, 59.1 px across (columns 1154 to 1250, the silhouette at grey 235), as the published .625: 94.6 px/in. Read by the collar, columns 1128 to 1144: 71.0 px against the journal's 59.1
The larger photograph; the maker's own picture reads the same within its ±.
A gas block's rear face comes back to it. Faxon's profile sentence for this barrel names no collar; both its own picture and Primary Arms' show one (Faxon's sentence for the Gunner profile has ".750″ step" behind the same journal: another part, whose figures aren't this one's).
Where the collar's full diameter begins, ahead of the extension's face8.668 in ± 0.02 in 220.2 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 8.668 in ± 0.02 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to where the collar reaches its full height (column 1143.8)
Behind it the barrel rises to the collar along a concave arc (a round-nosed tool's): 31.9 px long for 12.6 px of radius, a radius of 0.43 in. The two other arcs of the profile (ahead of the journal, behind the muzzle ring) have the same radius within 1%.
The gas block journal's rear shoulder (the collar's front face) ahead of the extension's face8.847 in ± 0.02 in 224.7 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 8.847 in ± 0.02 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to the collar's front face (column 1163.4: 82.2 px at 1163, 72.5 at 1164)
BCM's 16 in barrel has it at 8.848, Bear Creek's at 8.85, Aero's at 8.87: the same mid-length place. At the collar's foot the journal has a relief 0.03 in wide and 0.011 deep (66.1 px at column 1165 for the journal's 68.45), a dark line in Primary Arms' close view; it isn't drawn.
The gas port ahead of the extension's face9.137 in ± 0.04 in 232.1 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_03: the gas block journal close up from above its muzzle side, the port toward the lens, 2000 x 1333
Photo 9.137 in ± 0.04 in used
Primary Arms' gallery, 15A58M16NPQ_03: the gas block journal close up from above its muzzle side, the port toward the lens, 2000 x 1333, harvested
Scale: the journal's own length on the same line, 334 px, as the side photo's 1.113 in (journal_front_x less journal_rear_x): 300 px/in along the barrel. Read by the middle of the port's mouth, 87 px ahead of the collar's front face (the far wall of the relief at its foot) on the line through the port along the barrel (33.6° in the picture), where the journal is 334 px long on that line to the step ahead of it: 0.290 of journal_length as the side photo has it (1.113), ahead of journal_rear_x (8.847). The ± covers the port's mouth (27 px long, its near wall in shadow) and which edge of the relief is the face
Faxon gives no distance ("it puts the port about two inches farther from the chamber than carbine-length gas"). The port is on top, in line with the index pin and the marking; it doesn't break the side photo's edge, so its place is read on Primary Arms' close view of the journal, along the line through it parallel to the barrel: 0.29 ahead of the collar's face (the Army's rifle barrel has .295, 8448548; BCM's reads 0.28). Checks: BCM's port is at 9.13, Bear Creek's at 9.14, Aero's at 9.17; a mid-length chart's at 9.18.
The gas block journal's front end (where the barrel begins to narrow) ahead of the extension's face9.96 in ± 0.02 in 253 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 9.96 in ± 0.02 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to where the edges leave the journal's level (column 1285.3: 68.4 px to 1284, 67.5 at 1286)
Where the arc ahead of the journal ends and the forward section begins, ahead of the extension's face10.181 in ± 0.03 in 258.6 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 10.181 in ± 0.03 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to where the edges become level (column 1309.5: 55.1 px at 1309, 54.8 from 1312)
Faxon: "the forward taper is turned from .625″ to .525″". In the photo it is a concave arc 24 px long, steepest at the journal and running out level into the forward section: a radius of 0.43 in.
The forward section's diameter, between the journal and the ring behind the muzzle shoulder0.502 in ± 0.009 in 12.8 mmConflictPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Published “Profile Pencil: .980″ chamber journal, tapered body behind the gas block, .625″ journal (1.1″ long), tapered from .625″ to .525″ ahead of it, .615″ muzzle shoulder”
Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications; its FAQ: "a .625″ gas journal with the body tapered on both sides of it, down to .525″ ahead of the block", the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Photo 0.502 in ± 0.009 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the level section ahead of the journal, columns 1312 to 1800: 54.94 px (54.7 to 55.3 along it). The ± is a pixel
Photo 0.508 in ± 0.012 in
Faxon's own gallery, 15A58M16NPQ-01: the barrel from the side on white, the muzzle at the right, two award badges under it, 2000 x 2000, harvested
Scale: its gas block journal, 59.1 px across (columns 1154 to 1250, the silhouette at grey 235), as the published .625: 94.6 px/in. Read by the level section ahead of the journal, columns 1274 to 1694: 47.5 px rising to 48.7 (the muzzle a little nearer the lens) against the journal's 59.1
Two photographs of this number, the maker's own among them, show a level section of .50 where the sentence has a taper to .525, and show the .525 behind the collar; the larger photograph's reading is drawn. The maker's sentence stays beside it.
faxon and photo differ by 0.023 in beyond what each states it is good to.
faxon and faxon-photo differ by 0.017 in beyond what each states it is good to.
A CONFLICT, kept: Faxon's sentence has the barrel "tapered from .625″ to .525″ ahead of" the journal (and its FAQ: "down to .525″ ahead of the block"); both photographs of this number on file, the maker's own and Primary Arms', have a level section ahead of the journal that reads .50, and have the .525 just behind the collar, at the long taper's thin end (taper_front_od). At .525 the section would be 57.5 px across in Primary Arms' photo, where it is 54.8 to 55.1 over five hundred columns, between a journal (.625) and a muzzle shoulder (.615) that read within a pixel of their published figures either side of it. Faxon's sentence for its Gunner profile has ".500″ ahead of" the same journal. As steel the model weighs 4% over the published 1.20 lb with this section at .50 (19.96 oz) and 6% over with it at .525 (its chamber isn't cut, which is 2% of it, and the steel's density is known to 2%): the weight leans to the photographs' figure and doesn't settle it. The photograph's figure is drawn; a tenth of a pixel on the page either way.
Where the forward section ends and the barrel rises to the ring behind the muzzle shoulder, ahead of the extension's face14.704 in ± 0.03 in 373.5 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 14.704 in ± 0.03 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to where the edges begin to rise (column 1804.8: 54.8 px to 1803, 55.2 at 1806)
The rear end of the ring behind the muzzle shoulder (where it reaches its full diameter), ahead of the extension's face14.917 in ± 0.02 in 378.9 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 14.917 in ± 0.02 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to where the ring reaches its full height (column 1828.2)
The rise is a concave arc again: 23.4 px long for 6.2 of radius to the published .615 (6.6 to the photo's .622), 0.43 in.
The diameter behind the muzzle thread0.615 in ± 0.0005 in 15.6 mmConfirmedPublished: Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026
Published “Profile Pencil: .980″ chamber journal, tapered body behind the gas block, .625″ journal (1.1″ long), tapered from .625″ to .525″ ahead of it, .615″ muzzle shoulder” used
Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Photo 0.622 in ± 0.009 in
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the ring behind the shoulder, columns 1829 to 1840: 68.1 px. The ± is a pixel
The maker's figure, from its print; the photo reads it within a pixel.
Faxon: "a .615″ muzzle shoulder for the thread". A ring 0.11 in long: what a muzzle device or its washer seats against.
The muzzle shoulder ahead of the extension's face15.03 in ± 0.02 in 381.8 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 15.03 in ± 0.02 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height) to the shoulder's face (column 1840.5, where the ring's full height ends; ahead of it the corner is the face's rim arc, to column 1845)
Where the thread begins: a muzzle device or its washer seats here. The published figures alone put it at 15.030 (overall_length less the extension behind the face less Faxon's .625 of thread).
The muzzle thread's length0.625 in ± 0.0005 in 15.9 mmConfirmedPublished: Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026
Published “Muzzle 1/2x28 UNF-2A, .625″ of thread, target crown” used
Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Photo 0.626 in ± 0.02 in
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the shoulder's face (column 1840.5) to the muzzle's face (column 1909.0, behind its rim's 6 px arc): 68.5 px
The maker's figure; the photo reads it within a thousandth.
The muzzle thread's pitch0.036 in ± 0.00005 in 0.9 mmConfirmedPublished: Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026
Published “Muzzle 1/2x28 UNF-2A, .625″ of thread, target crown” used
Faxon Firearms, FAXON DUTY SERIES PENCIL PROFILE 16" MID-LENGTH 5.56 NATO AR15 BARREL (SKU 15A58M16NPQ), Specifications, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Thread Pattern 1/2 X 28”
Primary Arms, Faxon Firearms 5.56 AR-15 Barrel - Mid-Length - Pencil - 16" (15A58M16NPQ), Specifications; its Features: "Threaded 1/2x28", a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's own; the seller states the same thread.
28 threads to the inch. Faxon's page for this barrel writes the class UNF-2A (its Gunner profile's page, UNEF-2A, which is the Army barrel's designation for the same 1/2-28).
The muzzle thread's major diameter (its crests)0.496 in ± 0.0033 in 12.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_major_d}
Worked out 0.4957 in ± 0.0033 in used
{bcm-16-mid-barrel.thread_major_d}, from the site owner
The Army barrel's 1/2-28 thread, for the 1/2x28 Faxon states (8448549 sheet 1, Section M-M: "1/2-28 UNEF-2A MAJOR DIA .4989/.4924"), as read for BCM's barrel's ledger, where the drawing and its page are cited.
The photo's thread reads 0.487 across its crests' silhouette (53.3 px), between its crests and its roots.
The muzzle thread's minor diameter (its roots)0.455 in ± 0.002 in 11.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_minor_d}
Worked out 0.4551 in ± 0.002 in used
{bcm-16-mid-barrel.thread_minor_d}, from the site owner
8448549 sheet 1, Section M-M: "MINOR DIA .4551 MAX", as read for BCM's barrel's ledger. The photo has a relief of that diameter (49.3 px: .450) for 0.03 in ahead of the shoulder, where the thread runs out.
The bore's diameter (across the lands)0.219 in ± 0.001 in 5.6 mmConfirmedWorked out: {bcm-16-mid-barrel.bore_d}
Worked out 0.219 in ± 0.001 in used
{bcm-16-mid-barrel.bore_d}, from the site owner
The Army's barrel drawing (8448549 sheet 2, Section U-U: ".219 DIA+.001"), as read for BCM's barrel's ledger, where the drawing and its page are cited.
Faxon gives the grooves ("groove .2250″ air-gauged") and not the lands; the model's bore is one plain hole at the Army's land diameter.
The barrel indexing pin's diameter0.125 in ± 0.00025 in 3.2 mmConfirmedWorked out: {bca-556-16-mid-barrel.index_pin_d}
Worked out 0.12525 in ± 0.00025 in used
{bca-556-16-mid-barrel.index_pin_d}, from the site owner
The Army's own part (8448551, Pin, Barrel Indexing: ".1255 DIA -.0005"), as read for Bear Creek's barrel's ledger, where the drawing and its page are cited. Faxon: the extension is "pinned".
In the photo the pin shows 12.8 px of its width (0.117) before the flange's rim hides its front.
The barrel indexing pin's axis behind the flange's rear face0.111 in ± 0.012 in 2.8 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 0.111 in ± 0.012 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the pin's rear edge on the upper silhouette (column 175.7) plus half index_pin_d (6.86 px), to the flange's rear face (column 194.6: where the flange's rim arc, seen past the extension's body over columns 188 to 194, reaches its full height)
BCM's reads 0.113. Its front stands 0.05 behind the flange's rear face.
The barrel indexing pin's top above the bore's axis0.546 in ± 0.009 in 13.9 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333
Photo 0.546 in ± 0.009 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, the index pin and the gas port on top, 2000 x 1333, harvested
Scale: its end faces, 1821.3 px apart (columns 87.7 and 1909.0: where each end's rim arc reaches the full height, the silhouette at grey 235 of 255), as overall_length (16.631): 109.51 px/in. At that scale the gas block journal reads .6251 across (68.45 px over columns 1170 to 1284; published .625), 1.113 long (published 1.1) and the thread .6255 long (published .625): one scale for lengths and diameters. Read by the pin's top on the upper silhouette, columns 177 to 187: row 605.2, 59.75 px above the axis (row 664.95, the middle of the extension's two edges)
A little under the flange's radius (0.582): the pin stands 0.046 out of the extension's .999, under the Army's .094 MAX (8448548).
The barrel extension's rear opening, its diameter at the rear face0.77 in ± 0.005 in 19.6 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_d}
Worked out 0.77 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_d}, from the site owner
The inside of a mil-spec extension as the reference CAD set has it, read for BCM's barrel's ledger (where the file and the reading are cited), for how the rear end looks: Faxon's is an "M4 feed-ramp barrel extension", and Primary Arms' photo of its breech (21ee264e9f0f) shows its lugs and feed ramps. Appearance only.
The rear opening's chamfer, its depth (at 45°, also how far it narrows the opening's radius)0.045 in ± 0.005 in 1.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_chamfer}
Worked out 0.045 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_chamfer}, from the site owner
The circle the extension's locking lugs leave between their tips0.572 in ± 0.003 in 14.5 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_bore_d}
Worked out 0.572 in ± 0.003 in used
{bcm-16-mid-barrel.extension_lug_bore_d}, from the site owner
The locking lugs' front faces, ahead of the extension's rear end0.214 in ± 0.005 in 5.4 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_depth}
Worked out 0.214 in ± 0.005 in used
{bcm-16-mid-barrel.extension_lug_depth}, from the site owner
The recess ahead of the lugs, which the bolt's lugs turn in: its diameter0.83 in ± 0.003 in 21.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_d}
Worked out 0.83 in ± 0.003 in used
{bcm-16-mid-barrel.extension_recess_d}, from the site owner
The recess's front end, ahead of the extension's rear end0.595 in ± 0.005 in 15.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_depth}
Worked out 0.595 in ± 0.005 in used
{bcm-16-mid-barrel.extension_recess_depth}, from the site owner
The extension's rear face in the traced outline's own frame (from the silhouette's rear tip)0.103 in ± 0.014 in 2.6 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, 2000 x 1333
Photo 0.103 in ± 0.014 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, 2000 x 1333, harvested
Scale: scale from faxon-16-pencil-barrel.flange_od = 1.163 in (y-extent 127 px → 109.2 px/in). Read by the min end's face: the silhouette's tip at 0.004 less its rim's arc, 0.099 in of sag at radius 0.489925 (the end is seen from 11.4° off square; arc fitted over 120 rows, rms 0.003) of the traced outline (tools/trace.py); the extension's rear face in the outline's own frame (from its rear tip)
Where the outline is cut: the silhouette's tip is the rear rim's near side, which stands behind the face by the rim's arc.
The muzzle's face in the traced outline's own frame (from the silhouette's rear tip)16.804 in ± 0.131 in 426.8 mmProvisionalPhoto: Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, 2000 x 1333
Photo 16.804 in ± 0.131 in used
Primary Arms' gallery, 15A58M16NPQ_01: the barrel level on white, the muzzle at the right, 2000 x 1333, harvested
Scale: scale from faxon-16-pencil-barrel.flange_od = 1.163 in (y-extent 127 px → 109.2 px/in). Read by the max end's face: the silhouette's tip at 16.841 less its rim's arc, 0.037 in of sag at radius 0.231795 (the end is seen from 9.0° off square; arc fitted over 120 rows, rms 0.003) of the traced outline (tools/trace.py); the muzzle's face in the outline's own frame (from its rear tip)
Where the outline is cut: the silhouette's front tip is the muzzle rim's near side.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Barrel extension
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Muzzle thread
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake, HUXWRX Flash Hider-QD 556 1/2x28 (fit unchecked), Mil-spec A2 flash hider, 1/2-28 (drawing 9349051), Nordic Components 1/2-28 thread protector (ships on the 22RB), Otter Creek Labs Polonium, Otter Creek Labs Polonium K, Precision Armament M4-72 Severe-Duty® Compensator, SilencerCo Sparrow 22 (fit unchecked), SureFire ProComp 556 Muzzle Brake, SureFire SOCOM 3-Prong Flash Hider, SureFire SOCOM 4-Prong Flash Hider, SureFire WARCOMP Flash Hider, Taurus TX22 Thread Protector, VG6 Precision GAMMA 556
Gas block journal
Gas system length
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $149.95 Nov 21, 2026, in stock that day
- Primary Arms $154.99 Nov 21, 2026, in stock that day
- Midwest Gun Works $173.00 Nov 21, 2026, in stock that day
- Impact Guns $173.00 Nov 21, 2026, in stock that day
- Faxon Firearms $187.00 Nov 21, 2026, in stock that day
- Right To Bear $187.00 Nov 21, 2026, in stock that day