Muzzle device
Taurus TX22 Thread Protector
The cap the T.O.R.O. comes with on its 1/2-28 muzzle thread: round at its front, rounded over at its front edge, wrench flats behind, a hole in its face. No page names it or sells it alone; it is on the pistol in every photo of the T.O.R.O. ("Threaded Yes Thread Pitch 1/2 x 28", Sportsman's Warehouse).

- Weight
- 0.23 oz ± 0.05 oz Provisionalworked out: The model's steel, 0.0506 cubic inches (pipeline/blender/taurus_tx22_thread_protector.py's manifest), times std.density.steel (4.565 oz to the cubic inch): 0.231 oz. No page names its metal; it is a steel's look in every photo. The ± is its assumed flats and front wall. app/tests/taurus-tx22-thread-protector.test.ts holds the model's volume to it.
- Lowest price
- Sold in the Taurus TX22 Gen 2 T.O.R.O., 22 LR, 4.6 in, Hard Anodized Black, not by itself
- Colour
- Black nitride
- Drawn as
- modelled
- Maker's page
- sportsmans.com
In “Taurus TX22 T.O.R.O.”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length ahead of the barrel's shoulder, installed (to the front face; a washer's thickness included)0.527 in ± 0.05 in 13.4 mmProvisionalWorked out: {taurus-tx22-frame.rear_x} + {taurus-tx22-frame.pistol_overall_length} - {taurus-tx22-frame.slide_rear_x} - {taurus-tx22-toro-slide.length}
Worked out 0.527 in ± 0.05 in used
{taurus-tx22-frame.rear_x} + {taurus-tx22-frame.pistol_overall_length} - {taurus-tx22-frame.slide_rear_x} - {taurus-tx22-toro-slide.length}, harvested
From its rear face on the barrel's shoulder (at the slide's front face, where it goes out of sight) to its front face, where the pistol's published overall length puts it (the frame's rearmost point plus 7.60). The left view's silhouette reads 0.51 from the slide's face (the slide's near face and the protector's middle plane each at its own scale), Blackstone's 0.58 less its shorter slide face.
Largest outside diameter0.59 in ± 0.012 in 15 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 0.59 in ± 0.012 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame at the middle plane (158.8 px/in on the near face, 1.7% less on the middle plane: 156.1). Read by the silhouette 92 px high (rows 253 to 344, grey under 200) all along from 0.06 in behind its front face to the slide's face
Photo 0.6 in ± 0.012 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, harvested
Scale: the pin frame at the middle plane (157.2 px/in on the near face, 1.7% less: 154.6). Read by the silhouette 93 to 94 px high all along
The left view isn't yawed (the right is, some 5 degrees); the two agree within their ±.
Its silhouette over its length in the three side views (0.585 to 0.600 across, the frame's owner's reading): its wrench flats turn with how far it was screwed on, and across flats and across corners differ.
The wrench flats' length, from the rear face0.357 in ± 0.04 in 9.1 mmProvisionalWorked out: {.length} - {.round_length}
Worked out 0.357 in ± 0.04 in used
{.length} - {.round_length}, harvested
The flats end at a lit line round the protector 0.17 in behind its front face in both side views (column 30 to 32 in the left, 1164 to 1166 in the right); behind it the obliques show the flats, ahead of it the round front.
The round front, behind its front face0.17 in ± 0.02 in 4.3 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 0.17 in ± 0.02 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame at the middle plane (156.1 px/in). Read by the lit line round it at columns 30 to 32 against its front face's tip at column 3 to 4: 27 px
The rounding of its front edge (its radius)0.07 in ± 0.02 in 1.8 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 0.07 in ± 0.02 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame at the middle plane (156.1 px/in). Read by the silhouette's front comes to its full height over 11 px (columns 3 to 14: 46 px high at its tip, 90 at column 14)
Across its wrench flats0.565 in ± 0.02 in 14.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: six shallow flats (a hexagon in the left-front oblique, d4f6e257c86f) cut into the round, their corners left standing: the silhouette reads 0.585 to 0.600 in three views of two protectors however each was screwed on, so the flats take off little of it (a flat on top would read its own width). Over a 1/2-28 thread they leave a wall of some 0.03.
Worked out 0.565 in ± 0.02 in used
An assumption for the drawing, not a reading: six shallow flats (a hexagon in the left-front oblique, d4f6e257c86f) cut into the round, their corners left standing: the silhouette reads 0.585 to 0.600 in three views of two protectors however each was screwed on, so the flats take off little of it (a flat on top would read its own width). Over a 1/2-28 thread they leave a wall of some 0.03., harvested
The hole in its front face0.25 in ± 0.04 in 6.3 mmProvisionalPhoto: Sportsman's Warehouse 1883977-8: the T.O.R.O. from its right front and above
Photo 0.25 in ± 0.04 in used
Sportsman's Warehouse 1883977-8: the T.O.R.O. from its right front and above, harvested
Scale: its own front face's rim (an ellipse 90 x 145 px for 0.59 in). Read by the dark hole about 62 px high in the 145 px rim
Its front wall's thickness (ahead of the barrel's muzzle face)0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: a cap's front wall, the barrel's muzzle face behind it (the hole in the face is larger than the bore and shows no thread).
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: a cap's front wall, the barrel's muzzle face behind it (the hole in the face is larger than the bore and shows no thread)., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Muzzle thread
- Uppers
- Nordic Components 22RB .22 LR upper, 16", Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
- Barrels
- Taurus TX22 4.6 in Threaded Barrel