Barrel
Aero Precision 16" 5.56 CMV barrel, mid-length
Aero Precision's 16 in 5.56 NATO barrel: 4150 chrome moly vanadium, QPQ, 1:7 twist, a mid-length gas system on a .750 in journal, an M4 extension, a 1/2-28 muzzle thread.

- Weight
- 32 oz ± 0.5 oz Confirmedpublished: Aero Precision, 16" 5.56 CMV Barrel, Mid-Length (APBA100060C), Specifications, the maker, read Oct 2, 2026
- Lowest price
- $185.00 at Aero Precision, read Nov 21, 2026
- Made for
- Caliber 5.56 NATO
- Maker's number
- APBA100060C
- Colour
- Black nitride
- Drawn as
- modelled
- Maker's page
- aeroprecisionusa.com
In “Aero 5.56 carbine”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Barrel length as its maker states it16 in ± 0.1 in 406.4 mmConfirmedPublished: Aero Precision, 16" 5.56 CMV Barrel, Mid-Length (APBA100060C), Specifications, the maker, read Oct 2, 2026
Published “Barrel Length 16"” used
Aero Precision, 16" 5.56 CMV Barrel, Mid-Length (APBA100060C), Specifications, the maker, read Oct 2, 2026 the page, harvested Oct 2, 2026
The nominal length (by convention from the bolt's face to the muzzle); Aero's page doesn't say between which points.
The muzzle shoulder ahead of the extension's face14.89 in ± 0.06 in 378.2 mmCorroboratedPhoto: Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630
Photo 14.89 in ± 0.06 in used
Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630, harvested
Scale: its two end faces, 915.6 px apart (columns 43.2 and 958.8, each behind its rim's arc: tools/trace.py, end_face, the edge at grey 235), as overall_length (16.501: the published 16 from the breech face plus the extension behind it): 55.49 px/in. Read by the flange's rear face (column 97.5: its flat top begins at 98.0 and its rear corner's arc fills column 97), which seats on the receiver's front face, to the shoulder's face (column 924.0: the last column at the full diameter is 923, and the corner's arc ends by 925). The ± is a pixel at each face (0.03) and the published length's own ± (0.05 in 16.5)
Photo 14.95 in ± 0.08 in
Aero's gallery: its complete upper with this barrel under the 15 in R-ONE handguard, from the right, an A2 flash hider on the muzzle, 1000 x 630, harvested
Scale: its top rail's teeth (std.picatinny.slot_pitch), whose pitch shortens toward the muzzle: 14.592 px over the receiver (columns 110 to 320), 14.496 px over columns 330 to 600, 14.376 px over 600 to 870: 37.04, 36.79 and 36.49 px/in; the pivot and takedown lug holes, 236.08 px apart, give the same 37.03 at the receiver. Read by the receiver's front face (column 338.97: .661 ahead of the pivot lug's hole, drawing 8448524) to where the flash hider's washer begins on the bare barrel ahead of the handguard (column 886.8, read on an 8x crop): 261.0 px at 36.79, then 286.8 px at 36.49
Another photo at two thirds of the resolution, another scale, a handguard and a muzzle device over the barrel: the ± is a pixel at each end and 0.3% of scale.
The barrel's own photo, bare, at one and a half times the resolution; Aero's photo of the complete upper puts the shoulder 0.06 further out, inside the two readings' ±.
Where the thread begins and a muzzle device seats, from the flange's rear face. 14.83 until 2026-10-05: the photo's ends were then the silhouette's tips, 918 px apart (the rear one is its rim's near side, 2 px behind the face), the flange's face a pixel early, and the extension 0.46 behind the breech. The second reading is the check another session's note asked for (docs/STATUS.md had this barrel 'probably about 0.15 in short' by it): Aero's photo of its complete upper with this barrel, where the washer under the flash hider begins, by the rail's own teeth. The same photo has the flash hider's front face 16.81 ahead of the receiver, 1.86 ahead of that shoulder: the A2's 1.75 and 0.11 of crush washer. The catalog's A2 carries the Army's peel spacer at 0.0525 (a2-flash-hider.length), so the app's build ends 0.12 in short of that photo's: 0.06 the two shoulders' difference, 0.06 the washer's kind.
The muzzle thread's major diameter (its crests)0.496 in ± 0.0033 in 12.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A MAJOR DIA .4989/.4924” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
The middle of the two limits, ± half their spread.
The Army barrel's 1/2-28 thread, for the 1/2-28 Aero states: what the barrel's thread is drawn at since 2026-10-06 (its silhouette until then). Not a measurement of this barrel: the photo's silhouette of the thread, a pixel 0.018 in across, is the check, and it reads between the roots and the crests.
The muzzle thread's minor diameter (its roots)0.455 in ± 0.002 in 11.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “MINOR DIA .4551 MAX” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
A maximum: the ± is mine, as bcm-16-mid-barrel.thread_minor_d has it.
The muzzle thread's pitch0.036 in ± 0.00005 in 0.9 mmConfirmedPublished: Aero Precision, 16" 5.56 CMV Barrel, Mid-Length (APBA100060C), Specifications, the maker, read Oct 2, 2026
Standard “1/2-28 UNEF-2A”
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
Published “Thread Pitch 1/2-28 Threaded” used
Aero Precision, 16" 5.56 CMV Barrel, Mid-Length (APBA100060C), Specifications, the maker, read Oct 2, 2026 the page, harvested Oct 2, 2026
The maker's statement for this barrel; the Army's drawing has the same thread on its own.
28 threads to the inch, by Aero's statement and the Army barrel's drawing: neither is a measurement of this barrel, and its photo doesn't resolve the thread (a pitch is two pixels).
The bore's diameter (across the lands)0.22 in ± 0.0005 in 5.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 2 of 2, rev J: Section U-U, rifling detail at 10/1; user-supplied scan, PDF page 211
Standard “.219 DIA +.001” used
US Army TDP drawing 8448549 (Barrel), sheet 2 of 2, rev J: Section U-U, rifling detail at 10/1; user-supplied scan, PDF page 211, from the site owner
The middle of the limits, ± half their spread.
The cartridge's, for the hole the barrel is drawn with (2026-10-06): Aero states "Caliber 5.56 NATO" and no bore, so this is the Army barrel's for that cartridge and not a measurement of this one. The grooves (.2235 +.0010 on the same detail) aren't drawn.
The muzzle thread's length0.63 in ± 0.03 in 16 mmProvisionalPhoto: Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630
Photo 0.63 in ± 0.03 in used
Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630, harvested
Scale: its two end faces, 915.6 px apart (columns 43.2 and 958.8, each behind its rim's arc: tools/trace.py, end_face, the edge at grey 235), as overall_length (16.501: the published 16 from the breech face plus the extension behind it): 55.49 px/in. Read by the shoulder's face (column 924.0) to the muzzle's face (column 958.8): 34.8 px
The Army's M16 barrel has .63 from the shoulder to the muzzle (8448549 sheet 2); a mid-length chart in the TDP folder 0.624. Read 0.59 until 2026-10-05, from the shoulder to two columns short of the silhouette's end; the muzzle's face is a fifth of a pixel inside that end by its rim's arc.
The gas port ahead of the extension's face9.17 in ± 0.04 in 232.9 mmProvisionalPhoto: Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630
Photo 9.17 in ± 0.04 in used
Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630, harvested
Scale: its two end faces, 915.6 px apart (columns 43.2 and 958.8, each behind its rim's arc: tools/trace.py, end_face, the edge at grey 235), as overall_length (16.501: the published 16 from the breech face plus the extension behind it): 55.49 px/in. Read by the flange's rear face (column 97.5), which seats on the receiver's front face, to the journal's rear end, where the ring behind it (0.837 in across) ends (column 590.0: the silhouette steps down between columns 589 and 590): 8.874; plus 0.300 to the port
Aero says "Gas System Length Mid-Length" and gives no distance. Taken as the journal's rear end in the photo plus the 0.300 in a mid-length barrel's chart puts the port ahead of it (references' AR-15_M4_Barrel_Dimensions.jpg: a third-party illustration, not an Army drawing). Checks: the port itself is in the photo (the barrel is turned so that it faces the lens), a dot three pixels across with its middle at column 606.5, 0.297 ahead of the journal's rear end (the Army's 8448548 has .295 on the rifle's barrel) and 9.17 ahead of the flange's face; the same chart puts the port 9.670 ahead of the barrel's breech end, which is 0.489 behind this face on the reference CAD set's extension (the .620 tenon less the 0.131 flange): 9.18; the catalog's two other mid-length barrels read 9.13 and 9.14 by their own photos; and Shooting Sports USA (NRA) has a mid-length port 2 in ahead of a carbine's, from the upper receiver's face, the pistol port 4 in and the carbine 3 more: 9.
The gas block journal's diameter0.75 in ± 0.001 in 19 mmConfirmedPublished: Aero Precision, 16" 5.56 CMV Barrel, Mid-Length (APBA100060C), Specifications, the maker, read Oct 2, 2026
Published “Gas Block Journal .750"” used
Aero Precision, 16" 5.56 CMV Barrel, Mid-Length (APBA100060C), Specifications, the maker, read Oct 2, 2026 the page, harvested Oct 2, 2026
The diameter behind the muzzle thread0.7 in ± 0.03 in 17.8 mmProvisionalPhoto: Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630
Photo 0.7 in ± 0.03 in used
Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630, harvested
Scale: its gas block journal's diameter, 40.7 px, as the published .750 (journal_od): 54.2 px/in (tools/turned.py; a turned part's silhouette is true along its length at a diameter's scale). Read by the section behind the thread (px 883 to 923): ratio 0.933 to the journal
Read with the edge at grey 235 it is the same: 38.79 px against the journal's 41.76, 0.697.
End to end, the extension's rear face to the muzzle's face16.501 in ± 0.05 in 419.1 mmProvisionalWorked out: {.length} + {.extension_behind_breech}
Photo 16.44 in ± 0.1 in
Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630, harvested
Scale: its gas block journal's diameter, 41.76 px between its edges at grey 235 (the mean over columns 592 to 690), as the published .750 (journal_od): 55.68 px/in; the ± is a quarter pixel of that width. Read by its two end faces, each behind its rim's arc (tools/trace.py, end_face): columns 43.2 and 958.8, 915.6 px
Worked out 16.501 in ± 0.05 in used
{.length} + {.extension_behind_breech}, harvested
Lengths at the published length's scale, which the journal's agrees with to 0.3%. At it the extension reads 0.98 behind its flange (the reference CAD set's 0.990), the thread 0.63 (the Army's .63) and the gas port 9.17 from the receiver's face (a mid-length chart's 9.18).
The published length is the scale for lengths, and the journal's scale agrees with it: with the edge read at grey 235 the journal is 41.76 px across and the end faces 915.6 px apart, 16.44 in, 0.3% under. Until 2026-10-05 the photo stood here at 16.93: the silhouette's tips, 918 px apart, at the 54.2 px/in tools/turned.py read off the journal at mid-grey, where a dark tube with a light limb reads thin; that made the photo look 2.8% longer than the published length, and the note here said a black tube reads thin on white. It does at mid-grey, not at 235 (Bear Creek's barrel, the same).
The barrel extension's rear end behind the barrel's breech end0.501 in ± 0.01 in 12.7 mmProvisionalWorked out: {std.ar15.barrel_extension_behind_breech}
Standard “extension about 1.08 long (scaled); tenon .620 ±.001”
US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly), PDF page 212, top view at 1/1 (scaled: the extension's own drawing 8448550 isn't in the package); and 8448549 sheet 1 (the barrel's .620 tenon)
The extension's length less the barrel's tenon: 1.08 - .620.
Worked out 0.501 in ± 0.01 in used
{std.ar15.barrel_extension_behind_breech}, harvested
The reference CAD set's Barrel_Extension.step, 1.121 from its front face to its rear end, less the .620 tenon: the readings and their sources are in the standard's ledger (std.ar15.barrel_extension_length, std.ar15.barrel_tenon_length).
The CAD set's extension is read face by face, the drawing's view is scaled and isn't to one scale; the two agree within the scaled one's ±. And one figure for every barrel on this extension: BCM's and Bear Creek's use the same.
One extension for the catalog's three 5.56 barrels (2026-10-05): each took its 16 in from a breech placed by its own reading of the extension (0.46 here, 0.501, 0.57), and their muzzles stood 0.11 in apart. The extension's length less the barrel's tenon, which threads into it from its front face (8448549 sheet 1: .620 ± .001). The extension's own drawing (8448550) isn't in the package, so its length is the reference CAD set's, read for BCM's barrel; the reading scaled off the assembly drawing's 1/1 view, which stood here alone, is 0.04 less and stays beside it (that view's own callouts put its scale anywhere within 8%). This barrel's photo agrees with the CAD's extension where it can: 0.98 from its rear face to the flange's rear face (0.990), a flange about 0.12 between its corners (0.131), 0.997 across at the journal's scale (.9987). The bolt face sits behind the breech end (8448548 Section A-A: the bolt's lugs fill the .283 between the extension's locking face and the breech face); the published 16 is taken from the breech end, as the other two barrels take theirs.
The barrel extension's flange, its diameter1.173 in ± 0.06 in 29.8 mmProvisionalPhoto: Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630
Photo 1.173 in ± 0.06 in used
Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630, harvested
Scale: its gas block journal's diameter as the published .750 (tools/turned.py: ratio 1.564). Read by the silhouette's widest, px 97 to 104
The traced outline's scale reference (the silhouette's greatest height). With the edge at grey 235 the flange is 65.49 px against the journal's 41.76: 1.176. The reference CAD set's is 1.170.
The barrel extension's rear face, from the flange's rear face (negative: inside the receiver)-0.979 in ± 0.03 in -24.9 mmProvisionalPhoto: Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630
Photo -0.979 in ± 0.03 in used
Aero's gallery: the barrel from the side, straight on, the muzzle at the right, 1000 x 630, harvested
Scale: its two end faces, 915.6 px apart (columns 43.2 and 958.8, each behind its rim's arc: tools/trace.py, end_face, the edge at grey 235), as overall_length (16.501: the published 16 from the breech face plus the extension behind it): 55.49 px/in. Read by the extension's rear face (column 43.2, behind its rim's arc: the silhouette's tip, the rim's near side, is at 40.8) to the flange's rear face (column 97.5), which seats on the receiver's front face
The reference CAD set's extension has 0.990 here (1.121 less its 0.131 flange); BCM's barrel reads 0.984 by its own photo. -1.004 until 2026-10-05, from the silhouette's tip.
The extension's rear face in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)0.058 in ± 0.028 in 1.5 mmProvisionalPhoto: Aero's gallery: the 16 in 5.56 CMV mid-length barrel from the side, 1000 x 630
Photo 0.058 in ± 0.028 in used
Aero's gallery: the 16 in 5.56 CMV mid-length barrel from the side, 1000 x 630, harvested
Scale: scale from aero-556-16-mid-barrel.flange_od = 1.173 in (y-extent 65 px → 55.4 px/in). Read by the min end's face: the silhouette's tip at 0.014 less its rim's arc, 0.044 in of sag at radius 0.496269 (the end is seen from 5.1° off square; arc fitted over 118 rows, rms 0.005) of the traced outline (tools/trace.py); the extension's rear face in the outline's own frame (from its rear tip, at the journal's scale)
Where the outline is cut: the silhouette's tip is the rear rim's near side, which stands behind the face by the rim's arc.
The muzzle's face in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)16.581 in ± 0.849 in 421.2 mmProvisionalPhoto: Aero's gallery: the 16 in 5.56 CMV mid-length barrel from the side, 1000 x 630
Photo 16.581 in ± 0.849 in used
Aero's gallery: the 16 in 5.56 CMV mid-length barrel from the side, 1000 x 630, harvested
Scale: scale from aero-556-16-mid-barrel.flange_od = 1.173 in (y-extent 65 px → 55.4 px/in). Read by the max end's face: the silhouette's tip at 16.585 less its rim's arc, 0.004 in of sag at radius 0.225577 (the end is seen from 0.9° off square; arc fitted over 120 rows, rms 0.001) of the traced outline (tools/trace.py); the muzzle's face in the outline's own frame (from its rear tip, at the journal's scale)
Where the outline is cut. The fit finds almost no arc at this end (the thread's lead chamfer takes the rim's place), so the face is a fifth of a pixel inside the silhouette's end.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Barrel extension
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Muzzle thread
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake, HUXWRX Flash Hider-QD 556 1/2x28 (fit unchecked), Mil-spec A2 flash hider, 1/2-28 (drawing 9349051), Nordic Components 1/2-28 thread protector (ships on the 22RB), Otter Creek Labs Polonium, Otter Creek Labs Polonium K, Precision Armament M4-72 Severe-Duty® Compensator, SilencerCo Sparrow 22 (fit unchecked), SureFire ProComp 556 Muzzle Brake, SureFire SOCOM 3-Prong Flash Hider, SureFire SOCOM 4-Prong Flash Hider, SureFire WARCOMP Flash Hider, Taurus TX22 Thread Protector, VG6 Precision GAMMA 556
Gas block journal
- Gas blocks
- Aero Precision .750 low profile gas block, BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers, BCM Low Profile Gas Block (steel with set screws) 750, SLR Rifleworks Sentry 7 Set Screw Adjustable Gas Block, Superlative Arms .750" Adjustable Gas Block, Bleed Off - Set Screw
Gas system length
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Aero Precision $185.00 Nov 21, 2026, stock not said