Muzzle device
Precision Armament M4-72 Severe-Duty® Compensator
A three-port brake that vents its gas back and up: a round body with a narrow flat along its top, three ports each side cut back toward the shooter, a closed bottom, a ring between two grooves and eight wrench flats at its base. Precision Armament says it "delivers industry leading recoil reduction of 73-75% for standard 223 Remington" (its page; its spec sheet: "over a 70% reduction in recoil energy for most cartridges*", "*Based on high precision ballistic pendulum test data"), and LoadoutRoom reports The Truth About Guns' sled test: "With the M4-72, the test rig slid back an average of 2.4375 inches. With the standard A2 compensator, the rig slid back 8.4375 inches" (73.84 percent). Those are their claims; the app works out no recoil figure.

- Weight
- 2.6 oz ± 0.05 oz Confirmedpublished: Precision Armament, M4-72 Severe-Duty® Compensator (the product's page: its Specs table and description), the maker, read Oct 28, 2026
- Lowest price
- $74.99 at Primary Arms, read Nov 1, 2026 (Black)
- Made for
- Caliber .223/5.56mm (the spec sheet's M472-556 column); ".223/5.56mm model is designed to fit M4/M16/AR15 style rifles and features 1/2-28 threads"
- Maker's number
- M472-556
- Colours
- Black, Stainless
- Drawn as
- modelled
- Maker's page
- precisionarmament.com
In “Two-tone 16 in, Stealth Gray and soft-shooting”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (rear face to front face)2.25 in ± 0.0005 in 57.1 mmConfirmedPublished: Precision Armament, M4-72 Severe-Duty® Compensator (the product's page: its Specs table and description), the maker, read Oct 28, 2026
Published “Length: 2.250" (the Specs table's 5.56/.223 column)” used
Precision Armament, M4-72 Severe-Duty® Compensator (the product's page: its Specs table and description), the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Length 2.250” (the PRODUCT SPECIFICATIONS table's M472-556 column)”
Precision Armament, M4-72 SEVERE-DUTY® COMPENSATOR product specifications (spec sheet, Rev 09-14-2026), the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “2.250" Length”
Midwest Gun Works, Precision Armament M4-72 Severe-Duty 5.56MM / .223 Compensator 1/2x28", Black (Code A04002), Features, a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
The maker's own page; its spec sheet and a seller say the same.
Length ahead of the barrel's shoulder, installed (to the front face)2.25 in ± 0.0005 in 57.1 mmConfirmedWorked out: {.overall_length}
Worked out 2.25 in ± 0.0005 in used
{.overall_length}, harvested
It seats on its own rear face. The maker recommends its Accu-Washer to time it (A02119, "not included"), a separate product: drawn without it, so the length is the device's own. With a washer on the shoulder the rifle is that washer's thickness longer.
Largest outside diameter (the body, the ring and the front cap)0.865 in ± 0.0005 in 22 mmConfirmedPublished: Precision Armament, M4-72 Severe-Duty® Compensator (the product's page: its Specs table and description), the maker, read Oct 28, 2026
Published “Diameter: 0.865" (the Specs table's 5.56/.223 column)” used
Precision Armament, M4-72 Severe-Duty® Compensator (the product's page: its Specs table and description), the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Diameter 0.865” (the M472-556 column)”
Precision Armament, M4-72 SEVERE-DUTY® COMPENSATOR product specifications (spec sheet, Rev 09-14-2026), the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “0.865" Diameter”
Midwest Gun Works, Precision Armament M4-72 Severe-Duty 5.56MM / .223 Compensator 1/2x28", Black (Code A04002), Features, a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
The maker's own page; its spec sheet and a seller say the same. In the photos the body, the ring and the front cap are one width within 2 px (339 to 342 px).
Wrench flats at the rear, across flats0.766 in ± 0.008 in 19.5 mmCorroboratedPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.766 in ± 0.008 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
302 px from 0.04 to 0.26 from the rear face, where the silhouette is the flats at 3 and 9 o'clock (an octagon seen square on its top flat).
Photo 0.764 in ± 0.008 in
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-BLK-FRONT: the black one in the same pose, on white, 1024 x 1024, harvested
Scale: across, the body's 344 px as od (0.865): 397.7 px/in; along, its end faces 913.6 px apart as overall_length (2.250). Read by as the stainless one's, below a level of 200
304 px.
The two photos agree within 0.002 in; the stainless one's edges are the sharper on white.
"Tighten to 20-30 ft-lbs of torque using wrench flats at base of compensator" (the installation guide).
Wrench flats, how many round the base8ProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 8 count used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Counted on the faces that show: the logo's face square to the lens is 128 px wide and the two beside it 87 and 80 px as seen, 0.68 and 0.63 of it: faces turned 45 degrees (cos 45 = 0.71). A regular octagon of 302 px across flats has 125 px faces. The three-quarter photos (1e2ffa21d003, 897181cb9d98) show the faces' corners round the base.
Base (the wrench flats), length from the rear face to where the rear groove begins0.315 in ± 0.01 in 8 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.315 in ± 0.01 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
The silhouette steps from 0.743 to the groove's 0.682 between 0.308 and 0.323; the black photo between 0.313 and 0.323.
Base, the chamfer on its front edge (how far back from its front face it reaches the flats)0.05 in ± 0.015 in 1.3 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.05 in ± 0.015 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
The flats' silhouette (0.766) narrows from 0.26 from the rear face to 0.743 at its front face: a turned chamfer that takes the corners and reaches the flats there.
Base, the chamfer's radius at its front face0.372 in ± 0.006 in 9.4 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.372 in ± 0.006 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Half the silhouette's 0.743 just behind the groove's rear wall (0.739 in the black photo).
Base, the chamfer on its rear edge (drawn at 45 degrees)0.025 in ± 0.01 in 0.6 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.025 in ± 0.01 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
The flats' silhouette comes in 0.04 a side over the last 0.025 in; the rear face's own arc (the lens 2 degrees off its plane, 0.012 in) is mixed into the last rows. A round more than a chamfer by the way it fills in.
The two grooves either side of the ring, diameter0.682 in ± 0.008 in 17.3 mmCorroboratedPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.682 in ± 0.008 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
269 px in both grooves.
Photo 0.684 in ± 0.008 in
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-BLK-FRONT: the black one in the same pose, on white, 1024 x 1024, harvested
Scale: across, the body's 344 px as od (0.865): 397.7 px/in; along, its end faces 913.6 px apart as overall_length (2.250). Read by as the stainless one's, below a level of 200
272 px in both.
The two photos agree within 0.002 in.
The ring, rear face (from the rear face), where the rear groove ends0.394 in ± 0.01 in 10 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.394 in ± 0.01 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Midway up the ring's rounded rear edge (0.384 to 0.414); the black photo 0.392.
The ring, front face (from the rear face), where the front groove begins0.543 in ± 0.01 in 13.8 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.543 in ± 0.01 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Midway down its rounded front edge (0.523 to 0.553); the black photo 0.545.
The ported body, rear face (from the rear face), where the front groove ends0.633 in ± 0.01 in 16.1 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.633 in ± 0.01 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Midway up the body's rounded rear edge (0.622 to 0.652); the black photo 0.633.
The round on the ring's edges and the body's rear edge0.02 in ± 0.008 in 0.5 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.02 in ± 0.008 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Each of those edges takes 0.025 to 0.03 in along the device to come from the groove's width to the full one: drawn as a 45-degree break of this size.
The narrow flat along the top of the body, width0.263 in ± 0.01 in 6.7 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.263 in ± 0.01 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
The flat faces the lens: its two edges are lit lines at columns 470 and 573.5 (the mean of rows 560 to 640, where nothing is cut), 103.5 px. It runs from the front face along the body and across the ring, in one plane (Dirty Bird's photo of the stainless one, a055fdfb9f12: the ring has the same flat; the maker's three-quarter photo 1e2ffa21d003). The base's top flat, in line with it, is lower.
The installation guide: "the compensator must be properly 'timed' (indexed) with the narrow flat at the 12 o'clock position (top dead center)".
The front face's bevel, how far in from the outside it begins on the face0.072 in ± 0.015 in 1.8 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.072 in ± 0.015 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
The silhouette is 0.72 wide at the front face, 0.865 from 0.037 behind it. The three-quarter photo 1e2ffa21d003 shows the bevel as a band round the face's rim.
The front face's bevel, length along the device0.037 in ± 0.01 in 0.9 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.037 in ± 0.01 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Ports, on each side3ProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 3 count used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Three notches in each edge of the silhouette, the same on both sides, and so three baffles, the metal ahead of each port (the two teeth between the ports and the front cap): the maker's "triple baffle"; the side views on file (the spec sheet's render, the maker's photos of it on rifles, 4bea0a4d253a and 8de74efed3c5) have three ports in the side toward the lens, the front one open through the device. Nothing in the top or the bottom.
The maker: "Innovative reverse venting triple baffle design"; "Side vents are precisely canted upward to eliminate muzzle climb" (spec sheet); "Closed bottom construction combined with upward biased venting" (page).
Ports, how far in from the axis each side's notch reaches (its inner end)0.215 in ± 0.01 in 5.5 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.215 in ± 0.01 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Every port, both photos, both sides: no gap is left at 0.20 from the axis and every one has one at 0.22.
Ports, the round of the notch's inner corners0.04 in ± 0.02 in 1 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.04 in ± 0.02 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Each notch narrows over its last 0.03 to 0.05 in toward its inner end (at 0.22 from the axis 0.04 of a 0.1 span is left).
Ports, the rear wall's lean from square across the device (it moves forward going inward)54.7° ± 1.5°ProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 54.7 deg ± 1.5 deg used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
A line through each rear wall from 0.26 to 0.43 from the axis, both photos, both sides (36 points a port): forward 1.456, 1.365 and 1.412 in for an inch inward (55.5, 53.8 and 54.7 degrees from square), rms 0.006 to 0.012 in.
The rear wall leans back going outward, which is the reverse venting.
Ports, the front wall's lean from square (the first two ports)30.3° ± 1.5°ProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 30.3 deg ± 1.5 deg used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
From 0.30 to 0.43 from the axis: forward 0.558 and 0.613 in for an inch inward (29.2 and 31.5 degrees), rms 0.002 in. The third port's front wall is square across (-3.8 degrees, within its reading), the front cap's rear face.
Port 1 (the rearmost), rear wall at the outside (from the rear face)0.774 in ± 0.01 in 19.7 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 0.774 in ± 0.01 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Port 1, front wall at the outside1.054 in ± 0.006 in 26.8 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 1.054 in ± 0.006 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Port 2, rear wall at the outside1.195 in ± 0.01 in 30.4 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 1.195 in ± 0.01 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Port 2, front wall at the outside1.482 in ± 0.006 in 37.6 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 1.482 in ± 0.006 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Port 3 (the front one), rear wall at the outside1.607 in ± 0.012 in 40.8 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 1.607 in ± 0.012 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Port 3, front wall (square across: the front cap's rear face)2.121 in ± 0.006 in 53.9 mmProvisionalPhoto: Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024
Photo 2.121 in ± 0.006 in used
Precision Armament's gallery, M4-72-SEVERE-DUTY-MUZZLE-BRAKE-SS-FRONT: the stainless one standing, muzzle up, the narrow flat and the logo's flat toward the lens, on white, 1024 x 1024, harvested
Scale: across, the body's own width, 341 px, as od (0.865): 394.2 px/in; along, its end faces 908 px apart as overall_length (2.250): 403.6 px/in. Read by the silhouette's width and its runs row by row below a level of 240 of 255; the end faces where their rims' arcs meet the sides
Port 1's opening through the device seen from the side: rear end (from the rear face)0.926 in ± 0.03 in 23.5 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo 0.926 in ± 0.03 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Render x 0.887, 0.54 of the port.
From the side the ports show the light through the device in their front halves, higher than the axis in the first two (the vents "canted upward"). Read on the spec sheet's render, whose side view has them square on; mapped into the photos' frame by each port's own ends in the render's top view (rear wall 0.750, front 1.003 there; 0.774 and 1.054 here).
Port 1's opening: front end1.051 in ± 0.03 in 26.7 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo 1.051 in ± 0.03 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Render x 1.000, 0.99 of the port: at the front wall.
Port 1's opening: its lower edge (from the axis)-0.14 in ± 0.02 in -3.6 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo -0.14 in ± 0.02 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Port 1's opening: its upper edge (from the axis)0.232 in ± 0.02 in 5.9 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo 0.232 in ± 0.02 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Port 2's opening: rear end1.327 in ± 0.03 in 33.7 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo 1.327 in ± 0.03 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Render x 1.268 of a port from 1.134 to 1.426.
Port 2's opening: front end1.482 in ± 0.03 in 37.6 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo 1.482 in ± 0.03 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Render x 1.437, at the front wall (1.04 of the port by the render's top view): taken as the wall.
Port 2's opening: lower edge-0.147 in ± 0.02 in -3.7 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo -0.147 in ± 0.02 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Port 2's opening: upper edge0.239 in ± 0.02 in 6.1 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo 0.239 in ± 0.02 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Port 3's opening: rear end1.781 in ± 0.03 in 45.2 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo 1.781 in ± 0.03 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Render x 1.746 of a port from 1.567 to 2.095.
Port 3's opening: front end2.07 in ± 0.03 in 52.6 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo 2.07 in ± 0.03 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Render x 2.042.
Port 3's opening: lower edge-0.285 in ± 0.02 in -7.2 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo -0.285 in ± 0.02 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Port 3's opening: upper edge0.277 in ± 0.02 in 7 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo 0.277 in ± 0.02 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
The openings' corners, round0.06 in ± 0.03 in 1.5 mmProvisionalPhoto: Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded
Photo 0.06 in ± 0.03 in used
Precision Armament's spec sheet, its second render: the device from the top above, from the side below, 825 x 720 as embedded, harvested
Scale: along, each view's 639 px between the end faces as overall_length (2.250); across, the side view's body, 226 px, as od (0.865). Read by light pixels (above 150 of 255) inside the side view's body, column by column; positions along mapped by the port's own two walls in the top view, as each port's fraction (the render's views are in perspective: the device reads 5.6% long at one scale)
Port 1's opening is 0.16 high at its rear end and its full 0.37 0.06 in further on: a round end. The maker's photos on rifles (4bea0a4d253a, 8de74efed3c5) show the front one as a rectangle with round corners.
The chambers between the baffles, diameter, as drawn0.562 in ± 0.06 in 14.3 mmProvisionalWorked out: {.window_3_y1} - {.window_3_y0}
Worked out 0.562 in ± 0.06 in used
{.window_3_y1} - {.window_3_y0}, harvested
NOT SOURCED as a size: no view on file looks inside. The maker: "Innovative reverse venting triple baffle design". The front port's opening, seen from the side on the spec sheet's render, is 0.56 tall across the axis, and the three-quarter photo 1e2ffa21d003 shows through that port a baffle with the hole in it: each chamber is drawn that wide, from its port's rear wall to its front wall at the outside. Without them the model is 3.40 oz of 416 stainless for a part the maker weighs at 2.6.
The break on every machined edge, as drawn0.006 in ± 0.003 in 0.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows an edge's break in profile at this size; the same break SureFire's WARCOMP is drawn with.
Worked out 0.006 in ± 0.003 in used
An assumption for the drawing, not a reading: no view on file shows an edge's break in profile at this size; the same break SureFire's WARCOMP is drawn with., harvested
NOT SOURCED: a construction of the drawing, so that the edges catch the light as a machined part's do.
The hole through, at the front face0.29 in ± 0.03 in 7.4 mmProvisionalPhoto: Precision Armament's gallery, M4-72: the black one standing, seen from above its muzzle and to one side, 1024 x 1024
Photo 0.29 in ± 0.03 in used
Precision Armament's gallery, M4-72: the black one standing, seen from above its muzzle and to one side, 1024 x 1024, harvested
Scale: the front face's own width across its ellipse's long axis (365 px) as od (0.865), the hole's mouth and the face in one plane. Read by the dark of the hole across the same axis, 122 px, by eye on a crop at twice size; a chamfer at its mouth would read large
The installation guide: "RECOMMENDED MINIMUM BORE CLEARANCE IS 0.030” OVER BULLET DIAMETER".
The thread it is cut for: major diameter0.496 in ± 0.0033 in 12.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A MAJOR DIA .4989/.4924” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
The maker: "Thread Size 1/2x28" (spec sheet), ".223/5.56mm model is designed to fit M4/M16/AR15 style rifles and features 1/2-28 threads" (page), "M4-72-556 | .223 | 1/2-28 RH" (the installation guide's table). The Army barrel's 1/2-28, as the catalog's barrels are drawn.
The thread it is cut for: minor diameter0.455 in ± 0.002 in 11.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “MINOR DIA .4551 MAX” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
The thread it is cut for: pitch0.036 in ± 0.00005 in 0.9 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
Threaded hole's depth from the rear face, as drawn0.69 in ± 0.01 in 17.5 mmConfirmedWorked out: {a2-flash-hider.thread_depth}
Worked out 0.69 in ± 0.01 in used
{a2-flash-hider.thread_depth}, from the site owner
NOT SOURCED for this device: no page, drawing or photo on file looks into its rear end. Drawn as deep as the Army compensator's, which the same barrels take: it ends behind the first port and under the ring's front groove.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Muzzle thread
- Uppers
- Nordic Components 22RB .22 LR upper, 16", Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
- Barrels
- Taurus TX22 4.6 in Threaded Barrel
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $74.99 Black Nov 1, 2026, in stock that day
- AR15Discounts $85.49 Black Nov 21, 2026, stock not said
- AR15Discounts $85.49 Stainless Nov 21, 2026, stock not said
- Midwest Gun Works $89.99 Black Nov 21, 2026, in stock that day
- Midwest Gun Works $89.99 Stainless Nov 21, 2026, in stock that day
- Dirty Bird Industries $89.99 Stainless Nov 21, 2026, in stock that day
- Dirty Bird Industries $89.99 Black Nov 21, 2026, out of stock that day