Barrel
BCM Standard 14.5" Mid Length Barrel, Stripped
Bravo Company's 14.5 in government-profile barrel, stripped: MIL-B-11595E chrome moly vanadium steel, a chrome lined 5.56 NATO chamber and bore, 1/7 twist, manganese phosphate, a mid-length gas port drilled and dimpled on a .750 in journal, an M4 feed ramp extension, a 1/2-28 muzzle thread.

- Weight
- 26 oz ± 1 oz Confirmedpublished: BCM, BCM Standard 14.5" Mid Length Barrel, Stripped (BCM-BRL-s-MID-14-STD), Description, the maker, read Oct 6, 2026
- Lowest price
- $279.00 at BCM, read Nov 21, 2026
- Made for
- 5.56 NATO Chambers
- Maker's number
- BCM-BRL-s-MID-14-STD
- Colour
- Manganese phosphate, charcoal
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision 16" 5.56 CMV barrel, mid-length.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Barrel length as its maker states it14.5 in ± 0.05 in 368.3 mmConfirmedPublished: BCM, BCM Standard 14.5" Mid Length Barrel, Stripped (BCM-BRL-s-MID-14-STD), Description, the maker, read Oct 6, 2026
Published “These are stripped 14.5" Mid Length Standard 11595E barrels with gas ports installed and dimpled for a strong gas block installation.” used
BCM, BCM Standard 14.5" Mid Length Barrel, Stripped (BCM-BRL-s-MID-14-STD), Description, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Barrel Length 14.5”
Primary Arms, Bravo Company Manufacturing Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Government - 14.5" (BCM-BRL-S-MID-14-STD), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own; the seller repeats it.
The nominal length. BCM's page doesn't say between which points; the Army's barrel drawing (8448549) dimensions a barrel from its breech end, inside the extension, to its muzzle, and overall_length takes it so.
The gas block journal's diameter0.75 in ± 0.0005 in 19 mmConfirmedPublished: BCM, BCM Standard 14.5" Mid Length Barrel, Stripped (BCM-BRL-s-MID-14-STD), Description, the maker, read Oct 6, 2026
Published “(.750) at Gas Block location” used
BCM, BCM Standard 14.5" Mid Length Barrel, Stripped (BCM-BRL-s-MID-14-STD), Description, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Gas Seat Diameter .750”
Primary Arms, Bravo Company Manufacturing Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Government - 14.5" (BCM-BRL-S-MID-14-STD), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own; the seller repeats it.
The barrel extension's rear end behind the barrel's breech end0.501 in ± 0.01 in 12.7 mmProvisionalWorked out: {std.ar15.barrel_extension_behind_breech}
Worked out 0.501 in ± 0.01 in used
{std.ar15.barrel_extension_behind_breech}, from the site owner
The standard's: the reference CAD set's extension less the Army's .620 tenon (std.ar15.barrel_extension_behind_breech), the one figure the catalog's 5.56 barrels take their breech from. BCM: "M4 Feed Ramp Barrel Extension (USGI)".
End to end, the extension's rear to the muzzle15.001 in ± 0.07 in 381 mmConflictWorked out: {.length} + {.extension_behind_breech}
Photo 15.23 in ± 0.06 in
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: its extension's body as the Army's .999 (extension_od) and its journal as the published .750 (journal_od). Read by its two end faces, each behind its rim's arc (columns 122.8 and 2093.1: outline_rear_face, outline_front_face), at the scales its extension's body and its journal give with their edges read at grey 200 and no allowance for the cut-out's edge (127.90 px/in at column 178, 130.09 at 1528, a straight line between and beyond)
Photo 15.19 in ± 0.1 in
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: its muzzle thread's pitch as 28 to the inch (thread_pitch), with its extension's body and its journal. Read by the same two faces, with the thread as the ruler: the calibration fixed by the two diameters and by 28 threads to the inch at the muzzle (4.77 px a thread on rows just inside each edge, columns 2030 to 2090; the spectrum's peak, 4.74 to 4.83 by the row) in place of the published length
Worked out 15.001 in ± 0.07 in used
{.length} + {.extension_behind_breech}, harvested
The maker's length: the site's line on the law goes by it, and the photo's calibration is fixed by it. The two readings that don't use it are 1.3 and 1.5% longer, each for a reason of its own (the thread's pitch read over 60 px of a close photo; the cut-out's edge).
photo and published differ by 0.229 in beyond what each states it is good to.
thread and published differ by 0.189 in beyond what each states it is good to.
The published length is the scale for lengths: it is one of the three knowns the photo's calibration is fixed by, with the extension's body (the Army's .999) and the journal (.750). The two diameters alone, their edges read at grey 200, have the barrel 1.5% longer (the 16 in barrel's photo read 2.5% longer the same way: a black tube reads thin on white); what closes it is 0.79 px on each edge, a cut-out's width. The checks that are not among the three: the thread's silhouette comes out at 0.496 (the Army's crests .4957), the flange at 1.167 (the reference CAD set's 1.170), the extension 0.984 long behind its flange (0.990), the gas port at 9.10 (the three 16 in barrels' 9.13 to 9.17) and 0.286 ahead of the collar (BCM's own gas block: 0.275 from its rear face to its port), the thread 0.61 long (the Army's .63), and the thread's own pitch, 4.77 px, where the calibration expects 4.83: 1.3% apart, which is the second measurement here. The 11.5 in barrel's photo, taken from four times as far, closes the same way within 0.4%. The ± of the published one covers whether the 14.5 is from the barrel's breech end (the Army's drawing) or from the bolt's face, an eighth further back.
The barrel extension's rear end, from the flange's rear face (negative: inside the receiver)-0.984 in ± 0.03 in -25 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo -0.984 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 127.9 px/in along the axis there. Read by the rear end's face (column 122.8: outline_rear_face, behind its rim's arc) to the flange's rear face (column 248.5): where the flange's edges reach their full height; before it the edge is the rim's near arc, from column 232.5
The reference CAD set's extension has 0.990 here (1.121 less its 0.131 flange), and the 16 in barrel's own photo 0.984.
The extension flange's front face, ahead of its rear face (the flange's thickness)0.102 in ± 0.02 in 2.6 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.102 in ± 0.02 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 128.0 px/in along the axis there. Read by the flange's rear face (column 248.5) to where its edges stop being level (column 261.5)
The reference CAD set's flange is 0.131 thick; this one reads thinner, as the 16 in barrel's did (0.095). Ahead of the face the silhouette's corner is the rim's far arc, seen past the barrel (to column 277.5, 16 px on, as an ellipse seen from 21 degrees should be).
The barrel extension's flange, its diameter1.167 in ± 0.012 in 29.6 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 1.167 in ± 0.012 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 129.64 px/in there. Read by the silhouette's widest, columns 249 to 260: 149.7 px, with the cut-out's 1.58 px
The reference CAD set's is 1.170. (flange_od is this same height at the journal's scale alone, the outline's scale reference.)
The barrel extension's body, its diameter (what goes into the receiver)0.999 in ± 0.001 in 25.4 mmConflictStandard: US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly), rev N: the assembly's side view at 1/1; user-supplied scan, PDF page 212
Standard “DIAMETER NOT TO EXCEED .9990 FOR THIS LENGTH AFTER ASSEMBLY AND BEFORE FINISH” used
US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly), rev N: the assembly's side view at 1/1; user-supplied scan, PDF page 212, from the site owner
An upper limit: it goes into the receiver's 1.000 bore (8448524). The reference CAD set's extension is .9987.
Photo 0.982 in ± 0.008 in
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (journal_od): 130.09 px/in. Read by the extension's body, columns 130 to 225: 127.77 px against the journal's 97.57 (a line through each edge at grey 200)
The drawing's limit: an extension over 1.000 doesn't go into a receiver. The photo reads 1.7% small here because its breech end is further from the lens than its journal.
tdp and photo differ by 0.017 in beyond what each states it is good to.
The photo's reading says how square the photo is, not how big the extension is: at the journal's scale it is 1.7% small, the breech end standing further from the lens than the journal. It is one of the three knowns the photo's calibration is fixed by (with the journal's .750 and the published length), so the model draws it at the drawing's.
The chamber section's diameter (between the flange and the taper)0.98 in ± 0.012 in 24.9 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.98 in ± 0.012 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 129.76 px/in there. Read by columns 286 to 340: 125.62 px (a line through each edge at grey 200), with the cut-out's 1.58 px
The 16 in barrel's own photo has 0.99 here at its journal's scale, read 1.2% large.
Where the taper ahead of the chamber section begins, ahead of the extension's face0.777 in ± 0.03 in 19.7 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.777 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 128.3 px/in along the axis there. Read by the flange's rear face (column 248.5) to where the straight taper's edges, carried back, meet the chamber section's (column 348)
Where the taper ends and the section under the handguard begins, ahead of the extension's face1.627 in ± 0.03 in 41.3 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 1.627 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 128.8 px/in along the axis there. Read by the flange's rear face (column 248.5) to where the taper's edges meet the section's ahead (column 457.3)
A straight cone: its edges are lines within half a pixel from column 352 to 455.
The section under the handguard, its diameter at its rear end (the taper's foot)0.676 in ± 0.01 in 17.2 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.676 in ± 0.01 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 130.07 px/in there. Read by a line through each edge over columns 470 to 860, carried to column 470: 86.3 px, with the cut-out's 1.58 px
The section narrows toward the muzzle (the 16 in barrel's does too, .680 to .652 by its own photo): by more than the photo's lean, which runs the other way.
The section under the handguard, its diameter at its front end (where the ramp to the collar begins)0.651 in ± 0.01 in 16.5 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.651 in ± 0.01 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 131.65 px/in there. Read by a line through each edge over columns 860 to 1255, carried to column 1252: 84.16 px, with the cut-out's 1.58 px
Where the ramp up to the collar begins, ahead of the extension's face7.746 in ± 0.04 in 196.7 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 7.746 in ± 0.04 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 132.0 px/in along the axis there. Read by the flange's rear face (column 248.5) to where the edges leave the section's line (column 1255)
A concave ramp, steepening to a sharp corner at the collar's full diameter.
A station midway up the ramp, ahead of the extension's face7.977 in ± 0.03 in 202.6 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 7.977 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 132.1 px/in along the axis there. Read by the flange's rear face (column 248.5) to column 1285.5
With ramp_mid_od: the third point the model's arc is put through.
The ramp's diameter at that station0.712 in ± 0.012 in 18.1 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.712 in ± 0.012 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 131.72 px/in there. Read by columns 1285 and 1286: 92.2 px, with the cut-out's 1.58 px
Where the collar reaches its full diameter (the ramp's top), ahead of the extension's face8.204 in ± 0.03 in 208.4 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 8.204 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 132.2 px/in along the axis there. Read by the flange's rear face (column 248.5) to where the edges become level (column 1315.5)
The collar behind the gas block journal, its diameter0.853 in ± 0.01 in 21.7 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.853 in ± 0.01 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 131.86 px/in there. Read by columns 1322 to 1395: 110.96 px (a line through each edge at grey 200), with the cut-out's 1.58 px
What a gas block's rear face comes back to. The 16 in barrel's reads 0.86 by its own photo.
The gas block journal's rear shoulder (the collar's front face) ahead of the extension's face8.812 in ± 0.03 in 223.8 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 8.812 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 132.5 px/in along the axis there. Read by the flange's rear face (column 248.5) to the collar's front face (column 1396): where its edges begin to fall; the fall is its rim's near arc, an ellipse 7.4 px deep seen past the journal for 3.5 px, and the edge follows it to column 1399.5
A gas block's rear face comes back to this shoulder. The 16 in barrel's is at 8.848 by its own photo, Aero's at 8.87, Bear Creek's at 8.85.
The gas port ahead of the extension's face9.098 in ± 0.05 in 231.1 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 9.098 in ± 0.05 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 132.7 px/in along the axis there. Read by the flange's rear face (column 248.5) to the middle of the port's mouth (column 1441.5, row 734.5: a dark spot 8 px across inside a lighter ring of 13), brought back to the axis's depth (column 1433.8)
BCM says "gas ports installed and dimpled" and gives no distance. The port faces the lens in this photo, so its mouth is seen 0.375 in nearer than the axis and stands off toward the picture's edge by 7.7 px (0.06 in): taken out, with the lens 16.7 in off (a further inch either way moves it 0.003). 0.29 ahead of the journal's rear shoulder, as the 16 in barrel's is (8448548 has .295 on the rifle's barrel; a mid-length chart .300), and where BCM's own gas block has its port ahead of its rear face (0.275). Checks: the 16 in barrel's port is at 9.13 by its own photo, Aero's at 9.17, Bear Creek's at 9.14; the chart in the TDP's folder (AR-15_M4_Barrel_Dimensions.jpg, a third-party illustration) puts a mid-length port 9.050 ahead of the extension's front face, 9.15 from this one with this flange's 0.102. The ± covers the calibration's own doubt along the barrel (the thread's pitch has the muzzle end's scale 1.3% smaller: overall_length).
The gas block journal's front end (where the barrel steps down) ahead of the extension's face10.736 in ± 0.04 in 272.7 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 10.736 in ± 0.04 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 133.6 px/in along the axis there. Read by the flange's rear face (column 248.5) to the journal's front face (column 1652): where its edges begin to fall, on its rim's near arc (12 px deep, seen for 3.6 px, to column 1656)
The journal is 1.92 long: long enough for a front sight base's two bands.
The diameter ahead of the journal (between its front end and the step behind the muzzle)0.718 in ± 0.01 in 18.2 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.718 in ± 0.01 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 132.75 px/in there. Read by columns 1665 to 1930: 93.74 px (a line through each edge at grey 200), with the cut-out's 1.58 px
The marking "HP MP 1/7 5.56 NATO" is on this section. The 16 in barrel's reads 0.716 to 0.709.
The step behind the muzzle (where the last section begins) ahead of the extension's face12.84 in ± 0.04 in 326.1 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 12.84 in ± 0.04 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 134.7 px/in along the axis there. Read by the flange's rear face (column 248.5) to the step's face (column 1934.2): where the edges begin to fall, on its rim's near arc (18 px deep, seen for 4.4 px, to column 1939)
The diameter behind the muzzle thread0.7 in ± 0.012 in 17.8 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.7 in ± 0.012 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 133.11 px/in there. Read by columns 1950 to 2008: 91.57 px at their middle (a line through each edge at grey 200), with the cut-out's 1.58 px
The last section before the shoulder, 0.56 long. Its edges open 1.2 px toward the shoulder (0.695 to 0.704): drawn at its middle.
The muzzle shoulder ahead of the extension's face13.403 in ± 0.03 in 340.4 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 13.403 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 135.0 px/in along the axis there. Read by the flange's rear face (column 248.5) to the shoulder's face (column 2010.2): where that ellipse begins, fitted to the edges as they fall over columns 2012 to 2018 (0.5 px down at 2 px on, 2 at 4, 4.5 at 6, 8 at 8)
Where the thread begins: a muzzle device or its washer seats here. The corner ahead of it in the silhouette is its rim's near arc: the lens sees the muzzle end from 22 degrees off square, and the rim's ellipse, 19 px deep, stands past the thread for 13 px, to column 2023.5.
The muzzle thread's length0.614 in ± 0.03 in 15.6 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.614 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the photo's calibration (outline_lens_x, outline_yaw_run, outline_inset: a diameter's scale 131.34 px/in opposite the lens at column 1100 and 2.02 px/in more per 1000 px toward the muzzle, the cut-out's edge 0.79 px inside the barrel's); 135.4 px/in along the axis there. Read by the shoulder's face (column 2010.2) to the muzzle's face (column 2093.1: outline_front_face, behind its rim's arc and its crown's break)
The Army's is .63 (8448549 sheet 1, from the shoulder to the muzzle; a mid-length chart has .624); the 11.5 in barrel's own photo reads 0.63, the 16 in barrel's 0.50. The thread's own pitch reads 4.77 px here (rows just inside each edge, columns 2030 to 2090), which is 28 to the inch at 133.6 px/in where the calibration has 135.2: by the thread as the ruler it is 0.62.
The barrel indexing pin's axis behind the flange's rear face0.086 in ± 0.02 in 2.2 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.086 in ± 0.02 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the scale at the rim's depth, 0.58 in nearer the lens than the axis (16.7 in off): 134.3 px/in. Read by the pin's head (columns 203 to 218 on rows 722 to 738: its middle at 210.5) against the flange's rear rim where it passes nearest the lens (column 222): 11.5 px
The pin faces the lens in this photo, its head as far out as the flange's rim: the two are compared in one plane. The reference CAD set has 0.0765 (0.2075 behind the flange's front face, less its 0.131 flange); the 11.5 in barrel's own photo 0.081, the 16 in barrel's 0.113.
The barrel indexing pin's top above the bore's axis0.584 in ± 0.015 in 14.8 mmProvisionalWorked out: {bcm-16-mid-barrel.index_pin_top}
Worked out 0.584 in ± 0.015 in used
{bcm-16-mid-barrel.index_pin_top}, harvested
Not seen in profile in any photo of this barrel (the level one looks down on it). The same extension by BCM's words for both ("M4 Feed Ramp Barrel Extension (USGI)"): the 16 in barrel's reading, off its own side photo, by reference. (The 11.5 in barrel's own photo has its pin at 0.594.)
The photo's calibration: the lens's foot along the traced outline (in the outline's own frame, from the silhouette's rear tip)7.707 in ± 0.15 in 195.8 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 7.707 in ± 0.15 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the traced outline's own (flange_od): 130.4 px/in. Read by column 1100 of 2200, in the outline's unit (130.4 px/in from its tip at column 95.0)
The picture's middle. Every seam of the barrel shows as an arc, and the arcs turn over there: the flange's rim bulges toward the breech (26 px on a radius of 75), the collar's front face, the two steps and the shoulder toward the muzzle (7 to 19 px), in proportion to their distance from column 1100. The rear end's arc (outline_rear_face: seen from 23.7 degrees) puts the lens 17.2 in off, the muzzle's about 16.7 with the barrel's lean.
The photo's calibration: how fast its scale grows toward the muzzle (the scale is 1 + (x - outline_lens_x) / this, x along the traced outline)500 in ± 60 in 12700 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 500 in ± 60 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: its extension's body (extension_od) and its journal (journal_od). Read by the extension's body (127.77 px at column 178) as the Army's .999 and the journal (97.57 px at column 1528) as the published .750, each with the cut-out's 1.58 px: 129.48 and 132.21 px/in, 1350 px apart
The barrel leans 1.9 degrees to the lens, its muzzle nearer: the extension's body reads 1.7% small against the journal. A lean changes a diameter's scale in a straight line along the picture, and a length's twice as fast (a point of the axis at x is (x - outline_lens_x) / scale from the lens's foot). The scale grows 3.1% from the rear face to the muzzle.
The photo's calibration: how far inside the barrel's edge the cut-out's edge at grey 200 stands, on each side (in the outline's unit)0.006 in ± 0.004 in 0.2 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 0.0061 in ± 0.004 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: its extension's body (extension_od), its journal (journal_od) and its published length (overall_length). Read by solved: the length between the end faces (columns 122.8 and 2093.1) at the scales the extension's body and the journal give is 15.001 with 1.58 px added to every width, 15.226 with none
0.79 px. What makes the two known diameters' scales give the published length between the end faces (overall_length); with none, the barrel reads 15.23.
The barrel extension's flange, its diameter as the photo has it at the journal's scale1.151 in ± 0.008 in 29.2 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 1.151 in ± 0.008 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: its gas block journal's diameter, 97.57 px (columns 1410 to 1645, a line through each edge at grey 200), as the published .750 (journal_od): 130.09 px/in. Read by the silhouette's widest, columns 249 to 260: 149.7 px against the journal's 97.57
The scale reference of the traced outline (the silhouette's greatest height), which sets the outline's unit to the journal's own: 130.1 px to the inch. It is not the flange's size: the photo's breech end stands further from the lens than its journal (extension_od), and its cut-out edge is a little inside the barrel's (outline_inset). Corrected for both, the flange is 1.166; the reference CAD set's is 1.170.
The bore's diameter (across the lands)0.219 in ± 0.001 in 5.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 2 of 2, rev J: Section U-U, rifling detail at 10/1; user-supplied scan, PDF page 211
Standard “.219 DIA+.001” used
US Army TDP drawing 8448549 (Barrel), sheet 2 of 2, rev J: Section U-U, rifling detail at 10/1; user-supplied scan, PDF page 211, from the site owner
The muzzle thread's major diameter (its crests)0.496 in ± 0.0033 in 12.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A MAJOR DIA .4989/.4924” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
The Army barrel's 1/2-28 thread, for the 1/2 X 28 the seller states: what the model's thread is drawn at. The photo's silhouette of the thread is 0.496 once corrected (64.5 px at grey 200), on its crests.
The muzzle thread's minor diameter (its roots)0.455 in ± 0.002 in 11.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “MINOR DIA .4551 MAX” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
The muzzle thread's pitch0.036 in ± 0.00005 in 0.9 mmCorroboratedPublished: Primary Arms, Bravo Company Manufacturing Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Government - 14.5" (BCM-BRL-S-MID-14-STD), Specifications, a seller, read Oct 6, 2026
Standard “1/2-28 UNEF-2A”
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
Published “Thread Pattern 1/2 X 28” used
Primary Arms, Bravo Company Manufacturing Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Government - 14.5" (BCM-BRL-S-MID-14-STD), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The seller's statement for this barrel; the Army's drawing has the same thread on its own.
28 threads to the inch, by the seller's statement and the Army barrel's drawing: neither is a measurement of this barrel.
The gas port's diameter0.075 in ± 0.01 in 1.9 mmProvisionalPublished: AR-15_M4_Barrel_Dimensions.jpg in the user's TDP folder (Spec_Sheets): a third-party illustration of a 14.5 in mid-length barrel, no drawing number, a page
Published “0.075"ø Gas Port” used
AR-15_M4_Barrel_Dimensions.jpg in the user's TDP folder (Spec_Sheets): a third-party illustration of a 14.5 in mid-length barrel, no drawing number, a page, from the site owner
BCM publishes none. A mid-length chart's figure, for the hole the model cuts; the rifle's (8448548) is .092. In the photo the port's mouth is a dark spot about 8 px across, 0.06 in, inside a lighter ring: not a measurement of the drilled hole.
The barrel indexing pin's diameter0.125 in ± 0.002 in 3.2 mmProvisionalWorked out: {bcm-16-mid-barrel.index_pin_d}
Worked out 0.125 in ± 0.002 in used
{bcm-16-mid-barrel.index_pin_d}, from the site owner
A mil-spec extension's, as bcm-16-mid-barrel's ledger read it off the reference CAD set (BCM, of both barrels: "M4 Feed Ramp Barrel Extension (USGI)").
The barrel extension's rear opening, its diameter at the rear face0.77 in ± 0.005 in 19.6 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_d}
Worked out 0.77 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_d}, from the site owner
The inside of a mil-spec extension as the reference CAD set has it, read once in bcm-16-mid-barrel's ledger (BCM, of both barrels: "M4 Feed Ramp Barrel Extension (USGI)"). Appearance only.
The rear opening's chamfer, its depth (at 45°, also how far it narrows the opening's radius)0.045 in ± 0.005 in 1.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_chamfer}
Worked out 0.045 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_chamfer}, from the site owner
The circle the extension's locking lugs leave between their tips0.572 in ± 0.003 in 14.5 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_bore_d}
Worked out 0.572 in ± 0.003 in used
{bcm-16-mid-barrel.extension_lug_bore_d}, from the site owner
The locking lugs' front faces, ahead of the extension's rear end0.214 in ± 0.005 in 5.4 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_depth}
Worked out 0.214 in ± 0.005 in used
{bcm-16-mid-barrel.extension_lug_depth}, from the site owner
The recess ahead of the lugs, which the bolt's lugs turn in: its diameter0.83 in ± 0.003 in 21.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_d}
Worked out 0.83 in ± 0.003 in used
{bcm-16-mid-barrel.extension_recess_d}, from the site owner
The recess's front end, ahead of the extension's rear end0.595 in ± 0.005 in 15.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_depth}
Worked out 0.595 in ± 0.005 in used
{bcm-16-mid-barrel.extension_recess_depth}, from the site owner
The extension's rear face in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)0.213 in ± 0.012 in 5.4 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, from above, 2200 x 1467
Photo 0.213 in ± 0.012 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, from above, 2200 x 1467, harvested
Scale: scale from bcm-145-mid-barrel.flange_od = 1.151 in (y-extent 150 px → 130.4 px/in). Read by the min end's face: the silhouette's tip at -0.001 less its rim's arc, 0.214 in of sag at radius 0.487097 (the end is seen from 23.7° off square; arc fitted over 121 rows, rms 0.002) of the traced outline (tools/trace.py); the extension's rear face in the outline's own frame (from its rear tip, at the journal's scale)
Where the outline is cut: the silhouette's tip is the rear rim's near side, which stands behind the face by the rim's arc.
The muzzle's face in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)15.323 in ± 0.012 in 389.2 mmCorroboratedPhoto: Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467
Photo 15.303 in ± 0.107 in
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, from above, 2200 x 1467, harvested
Scale: scale from bcm-145-mid-barrel.flange_od = 1.151 in (y-extent 150 px → 130.4 px/in). Read by the max end's face: the silhouette's tip at 15.418 less its rim's arc, 0.115 in of sag at radius 0.244343 (the end is seen from 25.3° off square; arc fitted over 119 rows, rms 0.003) of the traced outline (tools/trace.py); the muzzle's face in the outline's own frame (from its rear tip, at the journal's scale)
Photo 15.323 in ± 0.012 in used
Primary Arms' gallery, BCM-BRL-S-MID-14-STD_02: the barrel level on white, seen from above, the muzzle at the right, 2200 x 1467, harvested
Scale: the traced outline's own (flange_od): 130.4 px/in. Read by the silhouette's tip (15.417) less the arc the face's own rim makes: the crown's corner is broken (the thread's edges leave their full height 17 px before the tip, where a rim of the thread's radius seen from 24 degrees would take 14), so the face's rim is 28 px in radius and its arc 12.3 px deep, the lens 16.7 in off the muzzle (the rear end's arc has it 17.2 in off, and the barrel leans 1.9 degrees, its muzzle nearer)
The tool fits one arc of the thread's own radius to the muzzle's rim and its broken corner together, and puts the face 0.02 in too far back; the rim's own arc, at the lens's distance as the rear end gives it, is the face. The thread is then 0.61 in long, the Army's .63 within the reading.
Where the outline is cut: the silhouette's front tip is the muzzle rim's near side.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Barrel extension
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Muzzle thread
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake, HUXWRX Flash Hider-QD 556 1/2x28 (fit unchecked), Mil-spec A2 flash hider, 1/2-28 (drawing 9349051), Nordic Components 1/2-28 thread protector (ships on the 22RB), Otter Creek Labs Polonium, Otter Creek Labs Polonium K, Precision Armament M4-72 Severe-Duty® Compensator, SilencerCo Sparrow 22 (fit unchecked), SureFire ProComp 556 Muzzle Brake, SureFire SOCOM 3-Prong Flash Hider, SureFire SOCOM 4-Prong Flash Hider, SureFire WARCOMP Flash Hider, Taurus TX22 Thread Protector, VG6 Precision GAMMA 556
Gas block journal
- Gas blocks
- Aero Precision .750 low profile gas block, BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers, BCM Low Profile Gas Block (steel with set screws) 750, SLR Rifleworks Sentry 7 Set Screw Adjustable Gas Block, Superlative Arms .750" Adjustable Gas Block, Bleed Off - Set Screw
Gas system length
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $279.00 Nov 21, 2026, in stock that day
- Primary Arms $279.00 Nov 21, 2026, out of stock that day