Muzzle device
Dead Air XRF Xeno Rimfire Muzzle Brake
Dead Air's rimfire muzzle brake for its RXD22Ti: a short black-nitrided 17-4 stainless body with a hex at its rear, the thread the suppressor's core screws onto, a steep taper it locks on, and one port straight through its nose. A brake on its own, or the RXD22Ti's quick-detach mount (it comes in that suppressor's box).

- Weight
- 1.05 oz ± 0.005 oz Confirmedpublished: Dead Air Silencers, XRF Xeno Rimfire Muzzle Brake (its Specifications), the maker, read Nov 6, 2026
- Lowest price
- $52.90 at KYGUNCO, read Nov 21, 2026
- Maker's number
- RXD674
- Colour
- Black nitride
- Drawn as
- modelled
- Maker's page
- deadairsilencers.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Nordic Components 1/2-28 thread protector (ships on the 22RB).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length, rear face to front face1.16 in ± 0.005 in 29.5 mmConfirmedPublished: Dead Air Silencers, XRF Xeno Rimfire Muzzle Brake (its Specifications), the maker, read Nov 6, 2026
Published “Total Length 1/2-28 : 1.16"” used
Dead Air Silencers, XRF Xeno Rimfire Muzzle Brake (its Specifications), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “Dead Air XRF Xeno Rimfire Muzzle Brake Black Nitride 17-4PH Stainless Steel 1/2"x28 Threads 1.16" OAL 0.81" Diameter RXD674”
DEGuns, Dead Air RXD674 (its title), a seller, read Nov 6, 2026 the page, harvested Nov 6, 2026
The maker's own page; a seller's title says the same.
Dead Air's page gives one line for its two threads: "Total Length 1/2-28 : 1.16" | M10x1 : 1.21" (added length .66")". The ".66" added length" is in the M10x1 one's half of the line and isn't this item's; whether it is the M10x1's length ahead of a muzzle it seats on isn't said.
Length ahead of the barrel's shoulder, installed (to the front face)1.16 in ± 0.005 in 29.5 mmConfirmedWorked out: {.overall_length}
Worked out 1.16 in ± 0.005 in used
{.overall_length}, harvested
The rear face bears on the shoulder (the manual, p. 6: "until the rear of the XRF muzzle device mates to the shoulder of the barrel"); no washer.
Largest outside diameter (the hex's corners, and the thread's crests)0.81 in ± 0.005 in 20.6 mmConfirmedPublished: Dead Air Silencers, XRF Xeno Rimfire Muzzle Brake (its Specifications), the maker, read Nov 6, 2026
Published “Diameter 0.81"” used
Dead Air Silencers, XRF Xeno Rimfire Muzzle Brake (its Specifications), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “0.81" Diameter”
DEGuns, Dead Air RXD674 (its title), a seller, read Nov 6, 2026 the page, harvested Nov 6, 2026
The maker's own page; a seller's title says the same.
Dead Air's one diameter; on the photo the hex (a flat to the lens, so its corners at the silhouette) reads 444 px and the thread's crests 446: the two are one size, 0.81.
The rear hex, across its flats0.75 in ± 0.03 in 19 mmProvisionalWorked out: An assumption for the drawing, not a reading: the manual's 3/4 in wrench taken to be for this hex, whose corners are turned to the published 0.81 in diameter (Midwest Gun Works' photo, 8425e22cd635, shows the corners rounded off).
Worked out 0.75 in ± 0.03 in used
An assumption for the drawing, not a reading: the manual's 3/4 in wrench taken to be for this hex, whose corners are turned to the published 0.81 in diameter (Midwest Gun Works' photo, 8425e22cd635, shows the corners rounded off)., harvested
No source gives it, and no view on file looks along the axis. The manual names three wrenches for putting it on: "Using a 1-1/16", 27mm, and a 3/4" wrench or the supplied RXD22Ti tools on the core, torque the muzzle device to the barrel at 20 foot-pounds." (p. 6); the 3/4 in one is the only size under the device's 0.81 in corners.
The hex's front edge, from the rear face0.162 in ± 0.008 in 4.1 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.162 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Row 965, where the hex's 444 px begin to fall.
Where the RXD22Ti's rear face stands when it is threaded on (from the rear face, the barrel's shoulder)0.197 in ± 0.008 in 5 mmCorroboratedPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.197 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Row 947, where the hex's front chamfer (444 to 408 px) ends.
Photo 0.196 in ± 0.008 in
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: Dead Air's 5.6 in for the RXD22Ti with its XRF over the pair's 1345 px (columns 78 to 1422): 240.2 px/in. Read by the silhouette's height column by column at a level of 235: the XRF's hex from column 78 to 124 (its corners 190 px), the core's flange rising from 125
Read on the device itself; the photo of the pair puts the core's face within a thousandth of it.
The core's rear face comes down to the front of the hex's chamfer: on this device's own photo the chamfer ends at row 947 (0.197 in); on Midwest Gun Works' photo of the two together (a copy on file, the RXD22Ti on its XRF from the side, scaled by Dead Air's 5.6 in over the pair) the XRF shows 47 px behind the core's flange, 0.196 in. The manual: "Thread the muzzle device onto your host firearm or into the suppressor until it bottoms out on the taper" (p. 6): the seat that holds is the taper inside, and this face is where the core stops with it.
The groove behind the thread (and the hex's chamfered front edge)0.75 in ± 0.008 in 19 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.75 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Rows 940 to 946, 408 to 416 px; the chamfer ends at 408.
The thread's crests begin (from the rear face)0.236 in ± 0.008 in 6 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.236 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Row 926: the flank behind the first crest rises from the groove over rows 940 to 926.
The thread's crests end (from the rear face)0.408 in ± 0.008 in 10.4 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.408 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Row 836, where the lead-in ahead of the thread begins to fall.
The thread the RXD22Ti's core screws onto, across its crests0.814 in ± 0.008 in 20.7 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.814 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
445 to 449 px over rows 836 to 925.
The thread's pitch0.037 in ± 0.002 in 1 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.0375 in ± 0.002 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Not stated anywhere on file. The crests' tips on the silhouette's left edge (the column falls to 524 at rows 842, 863, 883, 902) are 19.7 px apart: 0.0375 in, 26.7 to the inch. Read as that; whether it is 28 or 27 to the inch isn't settled by this photo (18.8 or 19.5 px).
The lead-in ahead of the thread ends (from the rear face)0.462 in ± 0.008 in 11.7 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.462 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Row 807: the width falls from 443 to 391 px over rows 836 to 807.
The neck between the thread and the taper's collar0.71 in ± 0.008 in 18 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.71 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
389 px, rows 778 to 806.
The taper's collar begins (from the rear face)0.519 in ± 0.008 in 13.2 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.519 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Row 777; a small chamfer over rows 770 to 777.
The taper's collar, the widest of the taper0.737 in ± 0.008 in 18.7 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.737 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
404 px, rows 747 to 769.
The taper begins, at the collar's front (from the rear face)0.576 in ± 0.008 in 14.6 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.576 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Row 747.
The manual: "Note that the XRF muzzle device has a very steep taper angle which results in a rock-solid lock up with very low torque." (p. 6). On the photo it narrows from 404 to 364 px over 87 rows: about 13 degrees a side.
The taper ends at the ported body (from the rear face)0.742 in ± 0.008 in 18.8 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.742 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Row 660.
The taper's small end0.664 in ± 0.008 in 16.9 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.664 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
364 px at row 660.
The ported body ahead of the taper0.653 in ± 0.008 in 16.6 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.653 in ± 0.008 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
356 to 360 px, rows 440 to 657.
The front face's outer edge, rounded0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photo is taken from above, and the front face's far rim and the edge's round are one curve in its silhouette (rows 399 to 440).
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: the photo is taken from above, and the front face's far rim and the edge's round are one curve in its silhouette (rows 399 to 440)., harvested
The hole through the front face0.26 in ± 0.03 in 6.6 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.26 in ± 0.03 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
The dark of the hole across the face's middle row (440), columns 678 to 835: 0.26 to 0.29 in, which may take in a chamfer; Dead Air: "Bore .22".
The port's middle, from the rear face0.922 in ± 0.01 in 23.4 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.922 in ± 0.01 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Its near mouth's rim from row 495 to 635.
Dead Air: "the performance of a single-port brake design". One slot through the body: the backdrop shows straight through it (column 820 is white from row 505 to 610), so its two mouths are opposite each other. Turned 23 degrees from the lens on this photo; the oblique on Dead Air's page (222c079d4c69) shows one mouth and the light through it.
The port's length along the axis0.266 in ± 0.01 in 6.8 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.266 in ± 0.01 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
Its near mouth, rows 495 to 635: a slot with round ends.
The port's width across0.178 in ± 0.01 in 4.5 mmProvisionalPhoto: Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white
Photo 0.178 in ± 0.01 in used
Midwest Gun Works, RXD674 standing on its rear face, seen square from its side and 13 degrees from above, 1500 x 1500, on white, harvested
Scale: its published length, 1.16 in, over the axis from the front face's middle to the rear face's (627 px with the 13 degrees taken out: 540.5 px/in along); its published diameter, 0.81 in, over the hex's 444 px (548 px/in across). Read by the silhouette's width row by row at a level of 235 of 255; a station is the row where the width changes, (1050.4 - row) / 610.4 x 1.16 from the rear face (± 4 px, 0.008 in); widths as read over 548 px/in (± 3 px, 0.006 in)
90 px across its near mouth at 23 degrees from the lens (its middle 69 px off the body's of 179 px half width): 98 px square on.
The front wall, how thick the nose is ahead of the room inside it0.08 in ± 0.04 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the inside is a room at the barrel thread's size from the rear face to a front wall about as thick as the nose's side wall (body_d less the room, halved: 0.08 in).
Worked out 0.08 in ± 0.04 in used
An assumption for the drawing, not a reading: the inside is a room at the barrel thread's size from the rear face to a front wall about as thick as the nose's side wall (body_d less the room, halved: 0.08 in)., harvested
Not stated, and no view on file looks into the device. Dead Air: the brake "helps capture lead and debris before it enters the suppressor"; on Midwest Gun Works' photo the backdrop shows straight through the port (8425e22cd635), and the hole in the front face is the bore's size. With the barrel's socket drawn as a room carried on at its size to this wall, the model's 17-4 weighs the published 1.05 oz within a few percent; drawn solid ahead of the barrel's thread it was 36% over.
The barrel thread's crests (1/2-28), the socket it goes in, and the room inside0.496 in ± 0.0033 in 12.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_major_d}
Worked out 0.4957 in ± 0.0033 in used
{bcm-16-mid-barrel.thread_major_d}, harvested
A 1/2-28 thread's crests, as read from the Army barrel's drawing for BCM's barrel; the device's own thread isn't dimensioned.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Muzzle thread
- Uppers
- Nordic Components 22RB .22 LR upper, 16", Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
- Barrels
- Taurus TX22 4.6 in Threaded Barrel
Suppressor mount
- Suppressors
- Dead Air RXD22Ti
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- KYGUNCO $52.90 Nov 21, 2026, in stock that day
- Midwest Gun Works $67.00 Nov 21, 2026, out of stock that day