Suppressor
Dead Air RXD22Ti
Dead Air's and Ruger's rimfire suppressor: a titanium tube Cerakoted black or Burnt Bronze, with a wrench hex and eight long flats, round a 3D-printed single-piece core, a castellated front cap ring, and the core's black flange at the rear. It screws onto Dead Air's XRF brake (a part of its own, in the box) until it bottoms on the brake's taper.

- Weight
- 4.6 oz ± 0.05 oz Confirmedpublished: Ruger, RXD22Ti (the RXD line's page), the maker, read Nov 6, 2026
- Lowest price
- Sold in the Dead Air RXD22Ti with the XRF Xeno Rimfire Muzzle Brake, not by itself
- Made for
- Caliber Rating .22LR, 22Mag, 17HMR, 17WSM, 5.7x28* (the asterisk, the manual p. 3: "While rated for semiautomatic use with 5.7x28 ammunition, some platform and ammunition combinations may result in poor performance and/or damage to your suppressor."); the manual p. 6: "THE RXD22TI IS RATED FOR .22 WINCHESTER MAGNUM RIMFIRE AND 5.7X28MM. IT IS OPTIMIZED FOR .22 LONG RIFLE (LR)."
- Maker's number
- RXD22TiBLK
- Colours
- Black, Burnt Bronze
- Drawn as
- modelled
- Maker's page
- deadairsilencers.com
Added to “22RB .22 LR rifle”, a build on the start page, which has no suppressor. The Dead Air XRF Xeno Rimfire Muzzle Brake goes in with it: it goes on that, and the build's own doesn't take it.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length on its XRF brake (the XRF's rear face to the front cap ring)5.6 in ± 0.05 in 142.2 mmConfirmedPublished: Dead Air Silencers, Fitment Guide (its table of models; a copy on file), the maker, read Nov 6, 2026
Published “Length 5.6"”
Dead Air Silencers, RXD22Ti (its Specifications), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “RXD22Ti 6AL4V Titanium, 17-4 Stainless Steel 5.6”/5.6oz (w/XRF Muzzle Device)” used
Dead Air Silencers, Fitment Guide (its table of models; a copy on file), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “5.6" x 1.1"”
Ruger, RXD22Ti (the RXD line's page), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “Length 5.6" (with XRF mount)”
Silencer Shop, dealer support article RXD 22Ti, a seller, read Nov 6, 2026 the page, harvested Nov 6, 2026
Dead Air's fitment guide says what the length is of (with the XRF); its page, Ruger's and a dealer's say the same 5.6.
Largest outside diameter (the tube)1.1 in ± 0.05 in 27.9 mmConfirmedPublished: Dead Air Silencers, RXD22Ti (its Specifications), the maker, read Nov 6, 2026
Published “Diameter 1.1"” used
Dead Air Silencers, RXD22Ti (its Specifications), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “5.6" x 1.1"”
Ruger, RXD22Ti (the RXD line's page), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “Diameter 1.1"”
Silencer Shop, dealer support article RXD 22Ti, a seller, read Nov 6, 2026 the page, harvested Nov 6, 2026
The maker's page; Ruger's and a dealer's say the same.
Weight on its XRF brake5.6 oz ± 0.05 ozConfirmedPublished: Dead Air Silencers, Fitment Guide (its table of models; a copy on file), the maker, read Nov 6, 2026
Published “Weight 5.6 Oz”
Dead Air Silencers, RXD22Ti (its Specifications), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “5.6”/5.6oz (w/XRF Muzzle Device)” used
Dead Air Silencers, Fitment Guide (its table of models; a copy on file), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Published “5.6 oz (with XRF muzzle device)”
Ruger, RXD22Ti (the RXD line's page), the maker, read Nov 6, 2026 the page, harvested Nov 6, 2026
Dead Air's guide says it is with the XRF; its page and Ruger's say the same 5.6.
Length, rear face (the core's flange) to the front cap ring's front5.403 in ± 0.05 in 137.2 mmCorroboratedWorked out: {.overall_length_with_mount} - {dead-air-xrf-brake.suppressor_seat_x}
Worked out 5.403 in ± 0.05 in used
{.overall_length_with_mount} - {dead-air-xrf-brake.suppressor_seat_x}, harvested
What the build adds ahead of the XRF's seat. On the photo of the pair: column 125 to 1422, 5.40 in.
The core's rear flange, its front edge (the tube's rear face), from the rear face0.121 in ± 0.013 in 3.1 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.121 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Columns 125 to 154.
The flange's rear chamfer ends (from the rear face)0.05 in ± 0.013 in 1.3 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.05 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Columns 125 to 137: 210 to 236 px.
The flange's rear face, at the chamfer's foot0.902 in ± 0.013 in 22.9 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.902 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
210 px at column 125.
The flange's corners (a hex, its corners turned)1.023 in ± 0.013 in 26 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 1.023 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
238 px, columns 138 to 154.
A hex: on the photo of the pair its top flat is lit and its corners round off (and Ruger's exploded photos of the parts, 7b58ad4e444d and 0b575e192b3a, show its flats). Its flats aren't read (flange_flats).
The flange's hex, across its flats0.924 in ± 0.04 in 23.5 mmProvisionalWorked out: {.flange_d} * {.hex_flats} / {.hex_corner_d}
Worked out 0.924 in ± 0.04 in used
{.flange_d} * {.hex_flats} / {.hex_corner_d}, harvested
An assumption for the drawing, not a reading: the flange is too short on the photo for its faces to be read, and is drawn with the tube's hex's share of its corners.
The tube's rear band begins at full size (from the rear face)0.171 in ± 0.013 in 4.3 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.171 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Column 166; its rear chamfer from column 155 (243 px, 0.125 in).
The tube's rear band (round, engraved RXD RXD22Ti 22 CAL)1.117 in ± 0.013 in 28.4 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 1.117 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
259 to 261 px, columns 166 to 256: 4 px over the tube.
The rear band ends at a groove (from the rear face)0.55 in ± 0.013 in 14 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.55 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Column 257.
The grooves either side of the wrench hex1.087 in ± 0.013 in 27.6 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 1.087 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
253 px, columns 257 to 274 and 389 to 410.
The tube's wrench hex begins (from the rear face)0.654 in ± 0.013 in 16.6 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.654 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Column 282.
The tube's wrench hex ends (from the rear face)1.045 in ± 0.013 in 26.5 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 1.045 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Column 376.
The tube's wrench hex, its turned corners1.074 in ± 0.013 in 27.3 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 1.074 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
250 px, columns 282 to 376.
The tube's wrench hex, across its flats0.969 in ± 0.04 in 24.6 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.969 in ± 0.04 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
A flat faces the lens: the faces show as bands down the hex, lit, dark and lit, 54, 108 and 60 px (rows 638, 692, 800, 860, by eye ± 6 px on a crop at 2.5 times), with the turned corners above and below (16 and 12 px). For flats at F/2 from the axis turned to a radius R, the face to the lens shows 2R sin a and each side face R sin a, where cos a = F/(2R): 108 = 250 sin a, a = 25.6 degrees, F = 0.902 of the corners. The manual names a 1-1/16 in and a 27 mm wrench for the core (p. 6): neither is this size, and no source says which flats they are for.
The round tube begins (from the rear face)1.191 in ± 0.013 in 30.3 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 1.191 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Column 411, after the groove (389 to 410).
Flats down the tube8ProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 8 count used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Long flats, deeper toward the front (wedges: narrow at their rear end, square across at the front). On the photo of the pair the one to the lens is centred 2.5 degrees above the axis and the next two 40 and 43 degrees either side; on Soldier Systems' photo of the black one standing (aa413639ea63) three show at 0 and about 45 and 50 degrees either side; the top of the silhouette dips 2 to 4 px over columns 491 to 724, a flat just past the edge. 45 degrees apart: eight.
The flats' rear ends (from the rear face)1.624 in ± 0.03 in 41.2 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 1.624 in ± 0.03 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Column 515, the point of the flat to the lens, by eye.
The flats' front ends (from the rear face)3.351 in ± 0.03 in 85.1 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 3.351 in ± 0.03 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Column 930, the flat to the lens, by eye (its end runs a little slant across it).
A flat's width at its front end0.232 in ± 0.02 in 5.9 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.232 in ± 0.02 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
The flat to the lens at its front end, rows 718 to 772, by eye.
On a round of radius R a flat as wide as w is R - sqrt(R^2 - (w/2)^2) deep: 0.012 in here. The lit face is what shows of it.
A flat's depth at its front end0.04 in ± 0.03 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: between the plane the width allows (0.012) and the depth the silhouette's dip implies (0.09); a groove of the radius that makes it flute_width wide at this depth.
Worked out 0.04 in ± 0.03 in used
An assumption for the drawing, not a reading: between the plane the width allows (0.012) and the depth the silhouette's dip implies (0.09); a groove of the radius that makes it flute_width wide at this depth., harvested
Two readings that don't agree on one shape: a plane as wide as flute_width at the front is 0.012 in deep there; but where the flat next to the top crosses the silhouette's edge (columns 491 to 724, deepest 558 to 631, about 1.95 in from the rear face) the edge dips 4 px, 0.017 in, at a fifth of the flat's length, which deepening evenly would make 0.09 at its front. The flats read as clean facets in every photo (a lit face, a shadowed front wall), so they are drawn as shallow round grooves between the two.
The ring groove round the tube near its front (from the rear face)4.933 in ± 0.013 in 125.3 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 4.933 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Column 1310, a line round the tube on a crop at 2.5 times.
The ring groove's width0.016 in ± 0.006 in 0.4 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.016 in ± 0.006 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
About 4 px on a crop at 2.5 times (columns 1308 to 1312).
A fine line lit from one side: read as its lit wall and its shadow together (CLAUDE.md).
The ring groove's depth0.008 in ± 0.005 in 0.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: a V half as deep as it is wide; no view on file shows the groove in the silhouette.
Worked out 0.008 in ± 0.005 in used
An assumption for the drawing, not a reading: a V half as deep as it is wide; no view on file shows the groove in the silhouette., harvested
The front cap ring's outside, where it stands out of the tube1.109 in ± 0.013 in 28.2 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 1.109 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
258 px, columns 1398 to 1409: the tube's own size; the seam between them is the line where the ring's black begins.
The tube's front edge (from the rear face)5.3 in ± 0.013 in 134.6 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 5.3 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
Column 1398, where the front cap ring stands out of the tube.
Notches round the front cap ring's lip6ProvisionalPhoto: Soldier Systems Daily, RXD22Ti in black standing, from a little above its front end, 3617 x 3618
Photo 6 count used
Soldier Systems Daily, RXD22Ti in black standing, from a little above its front end, 3617 x 3618, harvested
Scale: the ring's own width (columns 1633 to 2040 at full size). Read by each notch's middle across the ring, as the sine of its angle round from the lens
The manual: "by laying a 3/32 Allen wrench across the groves on the Front Cap Ring" (p. 8). On Soldier Systems' photo of the black one from just above its front end (aa413639ea63) notches stand at -78, -16 and +40 degrees round from the lens; on the photo of the pair at -17 and +38. 58 degrees apart: six.
A notch's width0.13 in ± 0.03 in 3.3 mmProvisionalPhoto: Soldier Systems Daily, RXD22Ti in black standing, from a little above its front end, 3617 x 3618
Photo 0.13 in ± 0.03 in used
Soldier Systems Daily, RXD22Ti in black standing, from a little above its front end, 3617 x 3618, harvested
Scale: the ring's own width (columns 1633 to 2040 at full size). Read by each notch's middle across the ring, as the sine of its angle round from the lens
The notch at -16 degrees on Soldier Systems' photo: 52 px of the ring's 407 there, square on, as 1.1 in.
A notch's depth into the ring's lip0.05 in ± 0.013 in 1.3 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.05 in ± 0.013 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
The lip's edge steps 12 px at each notch (columns 1404 to 1416).
The ring's front outer edge, rounded0.02 in ± 0.01 in 0.5 mmProvisionalPhoto: Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white
Photo 0.02 in ± 0.01 in used
Midwest Gun Works, RXD22TIBLK on its XRF, straight side view, rear at the left, 1500 x 1500, on white, harvested
Scale: along: Dead Air's 5.6 in over the pair's silhouette, columns 78 to 1422 (240.2 px/in); across: the tube's 256 px as the published 1.1 in (232.7 px/in). Read by the silhouette's height column by column at a level of 235 of 255; stations where the height changes, (column - 125) / 240.2 from the core's rear face (± 3 px, 0.013 in); heights over 232.7 px/in (± 3 px, 0.013 in)
The silhouette's height falls from 245 to 159 px over the last 4 columns (1418 to 1421).
The front cap ring's inside, round the core's front face0.85 in ± 0.05 in 21.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file looks into the front end square on; Ruger's exploded photo (7b58ad4e444d) shows a ring a little over a tenth of its own width thick.
Worked out 0.85 in ± 0.05 in used
An assumption for the drawing, not a reading: no view on file looks into the front end square on; Ruger's exploded photo (7b58ad4e444d) shows a ring a little over a tenth of its own width thick., harvested
The hole through the core's front face0.26 in ± 0.03 in 6.6 mmProvisionalWorked out: {dead-air-xrf-brake.bore_d}
Worked out 0.26 in ± 0.03 in used
{dead-air-xrf-brake.bore_d}, harvested
An assumption for the drawing: the XRF's bore as read on its photo. Dead Air: ".22 Caliber" bore (the fitment guide).
The core's front face behind the ring's front0.1 in ± 0.05 in 2.5 mmProvisionalWorked out: {.length} - {.tube_front_x}
Worked out 0.1 in ± 0.05 in used
{.length} - {.tube_front_x}, harvested
An assumption for the drawing: the core's face drawn at the tube's front edge, as far in as the ring stands out of it.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Suppressor mount
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake