Barrel
Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9"
Geissele's 13.9 in cold-hammer-forged 5.56 barrel, stripped, in its taper profile: chrome lined, 1:7 twist, manganese phosphate, a mid-length gas port (.081) on a .750 in journal with a dimple under it for a gas block's set screw, an M4 feed ramp extension, a 1/2 x 28 muzzle thread. Sellers' pages: "This 13.9" cold hammer-forged barrel features a mid-length gas system and a 1:7 twist rate" (Primary Arms); ".750" gas block diameter with a precision-machined dimple for secure mounting" and "High Pressure Tested (HPT) and Magnetic Particle Inspected (MPI)" (Huckleberry Arms). Its steel is stated three ways: "Chrome Moly Vanadium Steel" (Huckleberry Arms, Rooftop Defense, Kenzie's Optics), "Chromoly steel construction" and "Barrel Material Steel" (Primary Arms), "Material Chromolly Steel" (AR15Discounts, Dirty Bird).

- Weight
- 24 oz ± 0.8 oz Corroboratedpublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 13.9" (05-2989), Features; its Specifications: "Weight 1.5 lbs", a seller, read Oct 6, 2026
- Lowest price
- $365.00 at Primary Arms, read Nov 21, 2026
- Made for
- Chambered in 5.56 NATO, 1:7 twist
- Maker's number
- 05-2989
- Colour
- Geissele manganese phosphate (barrels)
- Drawn as
- modelled
- Maker's page
- primaryarms.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision 16" 5.56 CMV barrel, mid-length.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Barrel length as its sellers state it for the maker13.9 in ± 0.05 in 353.1 mmCorroboratedPublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 13.9" (05-2989), Specifications; its Features: "13.9" cold hammer-forged barrel", a seller, read Oct 6, 2026
Published “Barrel Length 13.9” used
Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 13.9" (05-2989), Specifications; its Features: "13.9" cold hammer-forged barrel", a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Barrel Length 13.9 inches”
Huckleberry Arms, Geissele CHF Chrome Lined Barrel 5.56 NATO – 13.9" (Product Code 05-2989), Technical Specs, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Length: 13.9″”
Rooftop Defense, Geissele Automatics 13.9" 5.56 Hammer-Forged Midlength Barrel (Geissele Part Number 05-2989), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Length 13.9″”
Kenzie's Optics, Geissele CHF Chrome Lined Barrel - 5.56 - 13.9" (SKU 05-2989), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Four sellers' pages state the one length; none is the maker's own page, which isn't read.
The nominal length: what the site's federal-law line goes by. No page says between which points; the Army's barrel drawing (8448549) dimensions a barrel from its breech end, inside the extension, to its muzzle, and overall_length takes it so. Under 16 in: the length Geissele's own complete uppers carry with a muzzle device pinned and welded on (the sellers' sentences are in the owner's report, not here).
The gas block journal's diameter0.75 in ± 0.0005 in 19 mmCorroboratedPublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 13.9" (05-2989), Specifications; its Features: ".750" gas block diameter, .081" gas port", a seller, read Oct 6, 2026
Published “Gas Seat Diameter .750” used
Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 13.9" (05-2989), Specifications; its Features: ".750" gas block diameter, .081" gas port", a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Gas Block Diameter .750"”
Huckleberry Arms, Geissele CHF Chrome Lined Barrel 5.56 NATO – 13.9" (Product Code 05-2989), Technical Specs, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Gas Block Journal Diameter: 0.750″”
Rooftop Defense, Geissele Automatics 13.9" 5.56 Hammer-Forged Midlength Barrel (Geissele Part Number 05-2989), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Three sellers' pages state the one diameter; none is the maker's own page.
The gas port's diameter0.081 in ± 0.0005 in 2.1 mmCorroboratedPublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 13.9" (05-2989), Features, a seller, read Oct 6, 2026
Published “.750" gas block diameter, .081" gas port” used
Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 13.9" (05-2989), Features, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Gas Port .081”
Huckleberry Arms, Geissele CHF Chrome Lined Barrel 5.56 NATO – 13.9" (Product Code 05-2989), Technical Specs, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Gas Port: 0.081″”
Rooftop Defense, Geissele Automatics 13.9" 5.56 Hammer-Forged Midlength Barrel (Geissele Part Number 05-2989), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Gas Port .081”
Kenzie's Optics, Geissele CHF Chrome Lined Barrel - 5.56 - 13.9" (SKU 05-2989), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Four sellers' pages state the one figure (and AR15Discounts', Dirty Bird's and C. Stephens' the same).
Published for this number (the 14.5 in sibling's is .076 on the same sellers' pages). In Primary Arms' side photo the port faces the lens: 11 px across, 0.080 in at the journal's scale.
The barrel extension's rear end behind the barrel's breech end0.501 in ± 0.01 in 12.7 mmProvisionalWorked out: {std.ar15.barrel_extension_behind_breech}
Worked out 0.501 in ± 0.01 in used
{std.ar15.barrel_extension_behind_breech}, from the site owner
The standard's (the reference CAD set's extension less the Army's .620 tenon: std.ar15.barrel_extension_length, std.ar15.barrel_tenon_length), as the catalog's other 5.56 barrels take it: the sellers state an M4 extension (Huckleberry: "Barrel Extension M4 Feedramps"; Primary Arms: "M4 feed ramps") and nothing of its size.
End to end, the extension's rear to the muzzle14.401 in ± 0.07 in 365.8 mmConflictWorked out: {.length} + {.extension_behind_breech}
Photo 14.226 in ± 0.08 in
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (52.25 px of radius over columns 1474 to 1614, the silhouette at grey 235: 139.34 px/in) and its extension's body as the Army's .999 (68.65 px over columns 114 to 224: 137.44 px/in), a line between the two along the photo, which is yawed (its scale 2.0% greater at the muzzle than at the breech): 137.4 to 140.1 px/in at this station. Read by its two end faces, each behind its rim's arc: the muzzle's at column 2093.1 (the tip at 2105.8, a 12.8 px arc at radius 35.1: seen from 20.0° off square), the extension's rear at 119.6 (the tip at 93.5, a 26.0 px arc at radius 68.7: 20.8°); through the line of scales, the lens's axis at column 1099.5
Worked out 14.401 in ± 0.07 in used
{.length} + {.extension_behind_breech}, harvested
Lengths at the published length's scale, as the catalog's other barrels: at that scale the gas port, which this photo shows, is 9.18 ahead of the receiver's face, where a mid-length chart has it (9.18) and Aero's is (9.17), and the thread comes out 0.62 long (the Army's .63).
photo and published differ by 0.175 in beyond what each states it is good to.
The photo, by the scales its journal and its extension give, has the two end faces 1.2% nearer than the published length gives (the 14.5 in barrel's photo, 0.6%): at grey 235 a black part's lit edge is taken a little wide, and its diameters with it. The published length is the scale for lengths. The difference is also about what a length taken from the bolt's face, an eighth behind the breech end, would make it (14.276): no page says which the 13.9 is, and the ± covers it. The rendering has 14.35.
The barrel extension's rear end, from the flange's rear face (negative: inside the receiver)-0.989 in ± 0.03 in -25.1 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo -0.989 in ± 0.03 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the rear end's face (column 119.6, behind its rim's 26 px arc) to the flange's rear face (column 252.7: the silhouette's edge between the flange's rim and the extension's body is the flange's rear rim seen from 18° off square, and columns 239 to 249 each put the face there within a pixel)
The reference CAD set's extension has 0.990 here (1.121 less its 0.131 flange).
The extension flange's front face, ahead of its rear face (the flange's thickness)0.117 in ± 0.015 in 3 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.117 in ± 0.015 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to its front face (column 268.5: the front rim's far arc, columns 275 to 281, each within a pixel of it)
The reference CAD set's flange is 0.131 thick (std.ar15.barrel_extension_flange_thickness), and the rendering's the same (0.13); the 14.5 in barrel's own photo reads 0.117.
The barrel extension's flange, its diameter1.167 in ± 0.008 in 29.6 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 1.167 in ± 0.008 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (52.25 px of radius over columns 1474 to 1614, the silhouette at grey 235: 139.34 px/in) and its extension's body as the Army's .999 (68.65 px over columns 114 to 224: 137.44 px/in), a line between the two along the photo, which is yawed (its scale 2.0% greater at the muzzle than at the breech): 137.56 px/in at this station. Read by the silhouette's widest, columns 249 to 265: 80.29 px of radius
At its own station's scale. The reference CAD set's is 1.170; the 14.5 in barrel's photo reads 1.168; the rendering of this barrel has 1.149 (a rendering's: both photographs have it larger).
The barrel extension's body, its diameter (what goes into the receiver)0.999 in ± 0.001 in 25.4 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_od}
Worked out 0.999 in ± 0.001 in used
{bcm-16-mid-barrel.extension_od}, from the site owner
The Army's limit on the assembly drawing (8448548: "DIAMETER NOT TO EXCEED .9990 FOR THIS LENGTH AFTER ASSEMBLY AND BEFORE FINISH"), as read for BCM's barrel's ledger, where the drawing and its page are cited.
Not read off this photo: with the journal it is what the photo's scale is taken from (at the journal's scale alone it reads .985, which is how the photo's yaw shows). The rendering has .9996 at its journal's scale.
The chamber section's diameter, ahead of the flange0.979 in ± 0.008 in 24.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.979 in ± 0.008 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (52.25 px of radius over columns 1474 to 1614, the silhouette at grey 235: 139.34 px/in) and its extension's body as the Army's .999 (68.65 px over columns 114 to 224: 137.44 px/in), a line between the two along the photo, which is yawed (its scale 2.0% greater at the muzzle than at the breech): 137.65 px/in at this station. Read by columns 284 to 359: 67.41 px of radius
A plain cylinder from the flange's front face to chamber_front_x. The rendering has 0.978.
Where the chamber section ends and the barrel begins to narrow, ahead of the extension's face0.916 in ± 0.03 in 23.3 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.916 in ± 0.03 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to where a line through the chamber section's radius (columns 284 to 359) meets a line through the cone's (columns 389 to 539): column 376.3
Where the cone ahead of the chamber ends and the long taper begins, ahead of the extension's face2.324 in ± 0.04 in 59 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 2.324 in ± 0.04 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to where a line through the cone's radius (columns 389 to 539) meets a line through the long taper's (columns 599 to 1339): column 566.8
The long taper's diameter at its rear end (the Geissele Taper Profile's thick end)0.726 in ± 0.008 in 18.4 mmCorroboratedPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.726 in ± 0.008 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (52.25 px of radius over columns 1474 to 1614, the silhouette at grey 235: 139.34 px/in) and its extension's body as the Army's .999 (68.65 px over columns 114 to 224: 137.44 px/in), a line between the two along the photo, which is yawed (its scale 2.0% greater at the muzzle than at the breech): 137.99 px/in at this station. Read by the two lines' crossing at column 566.8: 50.06 px of radius
Photo 0.718 in ± 0.008 in
C. Stephens Gun Works' picture, GEI05-2989_1_HR.jpg: a rendering of the barrel from above, the muzzle at the right, 2000 x 2000, harvested
Scale: its journal as the published .750 (50.79 px of radius over columns 1374 to 1494, the picture read at grey 200: 135.43 px/in); at that scale its extension is .9996 and its end faces, behind their rims' arcs, 14.35 in apart (the published length gives 14.40). Read by where a line through the cone's radius meets a line through the long taper's: 48.62 px of radius against the journal's 50.79
The photograph of the barrel; the rendering, read at another grey level, is within the two readings' ±.
The 14.5 in barrel's own photo has 0.725 here.
Where the long taper ends and the barrel flares to the gas block's collar, ahead of the extension's face8.276 in ± 0.04 in 210.2 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 8.276 in ± 0.04 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to where a line through the long taper's radius (columns 599 to 1339) meets a line through the flare's (columns 1384 to 1424): column 1380.4
Between the two the barrel narrows from 0.726 to 0.665 in 5.95 in: one straight line on both edges of the photo (0.0046 px of radius a pixel over 740 columns). This is the profile the sellers call "Geissele Taper Profile": no cylinder between the chamber and the gas block.
The long taper's diameter at its front end (the barrel's thinnest behind the gas block)0.665 in ± 0.008 in 16.9 mmCorroboratedPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.665 in ± 0.008 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (52.25 px of radius over columns 1474 to 1614, the silhouette at grey 235: 139.34 px/in) and its extension's body as the Army's .999 (68.65 px over columns 114 to 224: 137.44 px/in), a line between the two along the photo, which is yawed (its scale 2.0% greater at the muzzle than at the breech): 139.11 px/in at this station. Read by the two lines' crossing at column 1380.4: 46.28 px of radius
Photo 0.658 in ± 0.008 in
C. Stephens Gun Works' picture, GEI05-2989_1_HR.jpg: a rendering of the barrel from above, the muzzle at the right, 2000 x 2000, harvested
Scale: its journal as the published .750 (50.79 px of radius over columns 1374 to 1494, the picture read at grey 200: 135.43 px/in); at that scale its extension is .9996 and its end faces, behind their rims' arcs, 14.35 in apart (the published length gives 14.40). Read by where a line through the long taper's radius meets a line through the flare's: 44.55 px of radius against the journal's 50.79
The photograph of the barrel; the rendering, read at another grey level, is within the two readings' ±.
The 14.5 in barrel's own photo has 0.663 here.
The collar behind the gas block journal, its diameter0.842 in ± 0.008 in 21.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.842 in ± 0.008 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (52.25 px of radius over columns 1474 to 1614, the silhouette at grey 235: 139.34 px/in) and its extension's body as the Army's .999 (68.65 px over columns 114 to 224: 137.44 px/in), a line between the two along the photo, which is yawed (its scale 2.0% greater at the muzzle than at the breech): 139.21 px/in at this station. Read by columns 1443 to 1457: 58.62 px of radius
A gas block's rear face comes back to its front face. Its rear side isn't a face: it flares down to the taper over 0.47 in, a concave curve. A slot a sixteenth of an inch wide runs along its top, in line with the port (nine pixels across in this photo): the "indexing notch" a buyer of the 14.5 in barrel mentions. The rendering has the collar 0.834.
Where the collar's full diameter ends, ahead of the extension's face8.748 in ± 0.03 in 222.2 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 8.748 in ± 0.03 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to the last column at the collar's full radius (1445.5: 58.6 px, 58.3 a column and a half on and falling)
The gas block journal's rear shoulder (the collar's front face) ahead of the extension's face8.887 in ± 0.03 in 225.7 mmCorroboratedPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 8.887 in ± 0.03 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to the collar's front face (column 1464.6: the silhouette's step is at 1467.1 at half height, 2.4 px toward the muzzle by its rim's arc, the lens being 7° toward the breech from there; on the near side the face shows as a dark line at column 1473, the same face 8 px out by the same arc)
Photo 8.889 in ± 0.03 in
C. Stephens Gun Works' picture, GEI05-2989_1_HR.jpg: a rendering of the barrel from above, the muzzle at the right, 2000 x 2000, harvested
Scale: its end faces, behind their rims' arcs, 1943.4 px apart as overall_length (14.401): 134.95 px/in. Read by its flange's rear face to its collar's front face, each read off the silhouette behind its rim's arc: 1199.6 px
The photograph of the barrel; the rendering agrees to two thousandths.
A gas block's rear face comes back to this shoulder. The 14.5 in barrel's own photo has 8.882; the catalog's 16 in mid-length barrels 8.85 to 8.87.
The gas port ahead of the extension's face9.177 in ± 0.04 in 233.1 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 9.177 in ± 0.04 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to the port's centre: seen at column 1512.1 on top of the journal, which on the near side is 7.5 px toward the muzzle of its station (the lens stands 8° toward the breech from there): column 1504.6
The port itself: in Primary Arms' side photo it faces the lens, with the index pin, the collar's slot and the G in one line. 0.29 ahead of the journal's rear shoulder (BCM's 0.28, a mid-length chart's .300). Checks: Aero's mid-length port is at 9.17, BCM's 9.13, Bear Creek's 9.14, the chart's 9.18, the 14.5 in sibling's (read at its dimple, on its own photo) 9.168: mid-length by the photo as by every seller's word. A carbine-length port would be about two inches further back. Huckleberry: ".750" gas block diameter with a precision-machined dimple for secure mounting": the dimple is underneath, and not in this photo.
The gas block journal's front end (where the barrel begins to narrow) ahead of the extension's face9.933 in ± 0.03 in 252.3 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 9.933 in ± 0.03 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to where a line through the journal's radius (columns 1474 to 1614) meets a line through the cone's ahead of it (columns 1634 to 1699): column 1609.2
The journal is 1.05 long. Ahead of it the barrel narrows to the muzzle section over 0.66 in, a cone (no step).
Where the cone ahead of the journal ends and the muzzle section begins, ahead of the extension's face10.59 in ± 0.04 in 269 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 10.59 in ± 0.04 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to where a line through the cone's radius (columns 1634 to 1699) meets a line through the muzzle section's (columns 1734 to 1954): column 1700.3
The muzzle section's diameter, between the cone ahead of the journal and the ring behind the shoulder0.67 in ± 0.008 in 17 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.67 in ± 0.008 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (52.25 px of radius over columns 1474 to 1614, the silhouette at grey 235: 139.34 px/in) and its extension's body as the Army's .999 (68.65 px over columns 114 to 224: 137.44 px/in), a line between the two along the photo, which is yawed (its scale 2.0% greater at the muzzle than at the breech): 139.75 px/in at this station. Read by columns 1734 to 1954: 46.82 px of radius
A cylinder 1.9 in long: this is where the barrel is shorter than the 14.5 in one (2.5 in there). The rendering has 0.666.
The rear end of the ring behind the muzzle shoulder, ahead of the extension's face12.57 in ± 0.03 in 319.3 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 12.57 in ± 0.03 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to the last column at the ring's radius (1975.5: 48.8 px; 48.5 a column on and falling to 46.9 at 1964)
The ring is 0.22 long and comes down to the muzzle section over another 0.08 in (columns 1964 to 1975), a chamfer and not a step. Geissele's G is on the muzzle section just behind it.
Where the ring's rear chamfer meets the muzzle section, ahead of the extension's face12.487 in ± 0.03 in 317.2 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 12.487 in ± 0.03 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to the first column at the muzzle section's radius behind the ring (1964.0: 46.9 px, as at 1960)
The muzzle shoulder ahead of the extension's face12.792 in ± 0.03 in 324.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 12.792 in ± 0.03 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the flange's rear face (column 252.7) to the shoulder's face (column 2006.5: the silhouette's step is at 2014.3 at half height, 8 px toward the muzzle by the ring's rim's arc, the lens being 18° toward the breech from there; columns 2012 to 2016 each put the face at 2006 to 2007)
Where the thread begins: a muzzle device or its washer seats here, on the ring's front face. 0.59 in behind the 14.5 in barrel's (13.381), for 0.6 in of length.
The muzzle thread's length0.62 in ± 0.03 in 15.7 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.62 in ± 0.03 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the shoulder's face (column 2006.5) to the muzzle's face (column 2093.1, behind its rim's 12.8 px arc)
The Army's barrel has .63 here (8448549 sheet 1, from the shoulder to the muzzle); the 14.5 in barrel's own photo reads 0.619.
The diameter behind the muzzle thread0.701 in ± 0.008 in 17.8 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.701 in ± 0.008 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (52.25 px of radius over columns 1474 to 1614, the silhouette at grey 235: 139.34 px/in) and its extension's body as the Army's .999 (68.65 px over columns 114 to 224: 137.44 px/in), a line between the two along the photo, which is yawed (its scale 2.0% greater at the muzzle than at the breech): 139.95 px/in at this station. Read by columns 1977 to 1999: 49.02 px of radius (0.7005)
The ring behind the shoulder; the muzzle section behind it is 0.670 (muzzle_run_od). The rendering has the ring 0.695; the 14.5 in barrel's photo 0.699.
The bore's diameter (across the lands)0.219 in ± 0.001 in 5.6 mmConfirmedWorked out: {bcm-16-mid-barrel.bore_d}
Worked out 0.219 in ± 0.001 in used
{bcm-16-mid-barrel.bore_d}, from the site owner
The Army's barrel drawing (8448549 sheet 2, Section U-U: ".219 DIA+.001"), as read for BCM's barrel's ledger, where the drawing and its page are cited.
The cartridge's, for the hole the model cuts: the sellers state "Chambered in 5.56 NATO" and no bore.
The barrel indexing pin's diameter0.125 in ± 0.00025 in 3.2 mmConfirmedWorked out: {bca-556-16-mid-barrel.index_pin_d}
Worked out 0.12525 in ± 0.00025 in used
{bca-556-16-mid-barrel.index_pin_d}, from the site owner
The Army's own part (8448551, Pin, Barrel Indexing: ".1255 DIA -.0005"), as read for Bear Creek's barrel's ledger, where the drawing and its page are cited.
The barrel indexing pin's top above the extension's surface0.094 in ± 0.01 in 2.4 mmConfirmedWorked out: {bca-556-16-mid-barrel.index_pin_protrusion}
Worked out 0.094 in ± 0.01 in used
{bca-556-16-mid-barrel.index_pin_protrusion}, from the site owner
The Army's assembly drawing (8448548, Section A-A: ".094 MAX"), as read for Bear Creek's barrel's ledger, where the drawing and its page are cited.
A limit, and the model draws the pin at it. In Primary Arms' side photo the pin faces the lens: it isn't on the silhouette.
The barrel indexing pin's axis behind the flange's rear face0.077 in ± 0.025 in 2 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.077 in ± 0.025 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 119.6 and 2093.1, each behind its rim's arc), 14.226 in apart by the line of scales its journal and its extension give, the lens's axis taken at the image's middle (column 1099.5): stretched by 1.0123 to overall_length (14.401). Read by the pin's round top, 15 px across, its centre seen at column 216.3; its top stands 81.6 px toward the lens from the axis (the extension's radius and index_pin_protrusion), which 18° off square is 25.8 px toward the breech of its station: column 242.1, 10.6 px behind the flange's rear face (252.7)
The pin stands against the flange (half its diameter, 0.063, would have it touching), in line with the gas port and the collar's slot.
The barrel extension's rear opening, its diameter at the rear face0.77 in ± 0.005 in 19.6 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_d}
Worked out 0.77 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_d}, from the site owner
The inside of a mil-spec M4 extension as the reference CAD set has it, for how the rear end looks (the sellers: "Barrel Extension M4 Feedramps"; Huckleberry's pictures of this barrel's breech, e8a65f4c9001 and e01d5d5636fe, show the lugs and the ramps). Appearance only; the six figures of the opening are the readings made for BCM's barrel's ledger, where the file and the method are cited.
The rear opening's chamfer, its depth (at 45°, also how far it narrows the opening's radius)0.045 in ± 0.005 in 1.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_chamfer}
Worked out 0.045 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_chamfer}, from the site owner
The circle the extension's locking lugs leave between their tips0.572 in ± 0.003 in 14.5 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_bore_d}
Worked out 0.572 in ± 0.003 in used
{bcm-16-mid-barrel.extension_lug_bore_d}, from the site owner
The locking lugs' front faces, ahead of the extension's rear end0.214 in ± 0.005 in 5.4 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_depth}
Worked out 0.214 in ± 0.005 in used
{bcm-16-mid-barrel.extension_lug_depth}, from the site owner
The recess ahead of the lugs, which the bolt's lugs turn in: its diameter0.83 in ± 0.003 in 21.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_d}
Worked out 0.83 in ± 0.003 in used
{bcm-16-mid-barrel.extension_recess_d}, from the site owner
The recess's front end, ahead of the extension's rear end0.595 in ± 0.005 in 15.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_depth}
Worked out 0.595 in ± 0.005 in used
{bcm-16-mid-barrel.extension_recess_depth}, from the site owner
The muzzle thread's major diameter (its crests)0.496 in ± 0.0033 in 12.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_major_d}
Worked out 0.4957 in ± 0.0033 in used
{bcm-16-mid-barrel.thread_major_d}, from the site owner
8448549 sheet 1, Section M-M: "1/2-28 UNEF-2A MAJOR DIA .4989/.4924", as read for BCM's barrel's ledger.
The Army barrel's 1/2-28 thread, for the 1/2 x 28 the sellers state: what the model's thread is drawn at. The photo's silhouette of the thread is 0.501 at its station's scale (70.2 px at 140.05 px/in).
The muzzle thread's minor diameter (its roots)0.455 in ± 0.002 in 11.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_minor_d}
Worked out 0.4551 in ± 0.002 in used
{bcm-16-mid-barrel.thread_minor_d}, from the site owner
8448549 sheet 1, Section M-M: "MINOR DIA .4551 MAX", as read for BCM's barrel's ledger.
The muzzle thread's pitch0.036 in ± 0.00005 in 0.9 mmCorroboratedPublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 13.9" (05-2989), Specifications; its Features: "Threaded 1/2x28", a seller, read Oct 6, 2026
Published “Thread Pattern 1/2 X 28” used
Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 13.9" (05-2989), Specifications; its Features: "Threaded 1/2x28", a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Muzzle Thread Pitch 1/2 x 28”
Huckleberry Arms, Geissele CHF Chrome Lined Barrel 5.56 NATO – 13.9" (Product Code 05-2989), Technical Specs, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Two sellers' pages state the one thread.
28 threads to the inch, by the sellers' statement: not a measurement of this barrel.
The slot along the collar's top, in line with the gas port: its width0.063 in ± 0.015 in 1.6 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.063 in ± 0.015 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (the silhouette at grey 235: 139.2 px/in at the collar). Read by the slot's two edges on the collar's top, rows 731 to 739 on an eight-fold enlargement: 8.75 px
A slot with a round rear end, from the collar's front face back along its top for the collar's whole length. Not drawn: its depth isn't sourced (collar_slot_depth).
The slot along the collar's top: its depthNo value yetMissingNo source yet
No source: the photo looks straight down into it. Not drawn until a figure or a view from the muzzle is on file.
The dimple under the journal, for a gas block's set screw: its depthNo value yetMissingNo source yet
Huckleberry: ".750" gas block diameter with a precision-machined dimple for secure mounting". Primary Arms' close photo of the journal's underside (308babea3e35) shows it, a drilled spot with a coned floor just ahead of the collar, from an angle: neither its size nor its depth is read. Not drawn.
The flange as the side photo has it at the journal's scale: the traced outline's scale reference1.153 in ± 0.007 in 29.3 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 1.1525 in ± 0.007 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 52.25 px of radius over columns 1474 to 1614, 139.34 px/in). Read by the silhouette's widest, columns 249 to 265: 80.29 px of radius against the journal's 52.25
Not the flange's size (flange_od, 1.167): the photo is yawed, and at the journal's scale everything at the breech end reads 1.4% small. The traced outline is at this one scale throughout; the model corrects it by the four figures that follow.
The extension's body as the side photo has it at the journal's scale0.985 in ± 0.007 in 25 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.9854 in ± 0.007 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 52.25 px of radius over columns 1474 to 1614, 139.34 px/in). Read by the extension's body, columns 114 to 224: 68.65 px of radius against the journal's 52.25
Against extension_od (.999) this is how far the photo's scale has fallen between the journal and the extension: 1.4% in 9.87 in.
The middle of the extension's body in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)0.542 in ± 0.02 in 13.8 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 0.542 in ± 0.02 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: the traced outline's scale: 139.34 px/in. Read by column 169, the middle of the stretch outline_extension_od is read on, from the silhouette's rear tip (column 93.5)
The middle of the gas block journal in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)10.41 in ± 0.02 in 264.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 10.41 in ± 0.02 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: the traced outline's scale: 139.34 px/in. Read by column 1544, the middle of the stretch the journal's .750 is read on, from the silhouette's rear tip (column 93.5)
Where the lens's axis meets the photo, in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)7.22 in ± 0.25 in 183.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467
Photo 7.22 in ± 0.25 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, the gas port, the index pin and the G toward the lens, 2200 x 1467, harvested
Scale: the traced outline's scale: 139.34 px/in. Read by column 1099.5, the middle of the image's 2200, from the silhouette's rear tip (column 93.5)
Taken at the image's middle, as tools/trace.py's tube calibration takes it: a crop would move it. The rims' arcs put the point the lens stands square to the barrel at column 1127, 27 px from it. The ± is what a quarter of an inch of crop would be.
outline rear face0.184 in ± 0.011 in 4.7 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, 2200 x 1467
Photo 0.184 in ± 0.011 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, 2200 x 1467, harvested
Scale: scale from geissele-139-chf-barrel.outline_flange_od = 1.1525 in (y-extent 160 px → 138.8 px/in). Read by the min end's face: the silhouette's tip at 0.002 less its rim's arc, 0.182 in of sag at radius 0.489813 (the end is seen from 20.4° off square; arc fitted over 121 rows, rms 0.002) of the traced outline (tools/trace.py); the extension's rear face in the outline's own frame (from its rear tip, at the journal's scale)
outline front face14.406 in ± 0.088 in 365.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, 2200 x 1467
Photo 14.406 in ± 0.088 in used
Primary Arms' gallery, 05-2989_02: the barrel level on white, the muzzle at the right, 2200 x 1467, harvested
Scale: scale from geissele-139-chf-barrel.outline_flange_od = 1.1525 in (y-extent 160 px → 138.8 px/in). Read by the max end's face: the silhouette's tip at 14.494 less its rim's arc, 0.088 in of sag at radius 0.244906 (the end is seen from 19.8° off square; arc fitted over 117 rows, rms 0.002) of the traced outline (tools/trace.py); the muzzle's face in the outline's own frame (from its rear tip, at the journal's scale)
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Barrel extension
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Muzzle thread
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake, HUXWRX Flash Hider-QD 556 1/2x28 (fit unchecked), Mil-spec A2 flash hider, 1/2-28 (drawing 9349051), Nordic Components 1/2-28 thread protector (ships on the 22RB), Otter Creek Labs Polonium, Otter Creek Labs Polonium K, Precision Armament M4-72 Severe-Duty® Compensator, SilencerCo Sparrow 22 (fit unchecked), SureFire ProComp 556 Muzzle Brake, SureFire SOCOM 3-Prong Flash Hider, SureFire SOCOM 4-Prong Flash Hider, SureFire WARCOMP Flash Hider, Taurus TX22 Thread Protector, VG6 Precision GAMMA 556
Gas block journal
- Gas blocks
- Aero Precision .750 low profile gas block, BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers, BCM Low Profile Gas Block (steel with set screws) 750, SLR Rifleworks Sentry 7 Set Screw Adjustable Gas Block, Superlative Arms .750" Adjustable Gas Block, Bleed Off - Set Screw
Gas system length
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $365.00 Nov 21, 2026, in stock that day
- AR15Discounts $365.00 Nov 21, 2026, out of stock that day
- Dirty Bird Industries $365.00 Nov 21, 2026, out of stock that day