Muzzle device
SilencerCo Sparrow 22
A rimfire silencer that threads straight onto a 1/2x28 muzzle: a plain tube with a notched back cap at the mount end and a fluted front cap. Modelled from the outside only.

- Weight
- 6.5 oz Conflictpublished: SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026Its sources span 6.05 oz to 6.68 oz.
- Lowest price
- $296.00 at Silencer Shop, read Nov 21, 2026
- Made for
- 22 LR, 17 WSM, 17 HMR, 22 WMR, 22 HORNET, 5.7 X 28 MM (Multi caliber compatibility and rated for full auto fire (22 LR only))
- Maker's number
- SU75
- Colour
- SilencerCo Sparrow tube (magnesium phosphate)
- Drawn as
- modelled
In “22RB suppressed, FDE”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length5.08 in 129 mmConflictPublished: SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026
Published “LENGTH 5.08”” used
SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Page 3, Overview & Product Specs.
Published “Length 5.08””
SilencerCo, Sparrow 22 spec sheet (SKU SU75; copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Length 5.125 inches”
Ammunition To Go, Sparrow vs Switchback comparison table, a review, read Oct 1, 2026 the page, harvested Oct 1, 2026
An article's comparison table; not SilencerCo's figure, and not said to be measured.
SilencerCo's manual and spec sheet agree. A comparison article says 5.125.
manual and ammotogo differ by 0.045 in beyond what each states it is good to.
spec-sheet and ammotogo differ by 0.045 in beyond what each states it is good to.
Length ahead of the barrel's shoulder, installed (to the front face)5.08 in 129 mmProvisionalWorked out: {.overall_length}
Worked out 5.08 in used
{.overall_length}, harvested
The whole silencer: SilencerCo wants its mount's face on the barrel's shoulder (manual p. 1: "There should be no visible gap between the barrel shoulder and the face of the silencer thread mount"), and in Primary Arms' photo of the mount end (09406a0f6baa) that face is flush with the back cap's rear, with no skirt reaching back over the barrel. With SilencerCo's spacer on a longer thread it would stand off by the spacer's length, which isn't sourced.
Half the overall length (where the traced outline's middle sits from the rear face)2.54 in 64.5 mmProvisionalWorked out: {.overall_length} / 2
Worked out 2.54 in used
{.overall_length} / 2, harvested
Largest outside diameter (the tube)1.06 in 26.9 mmConflictPublished: SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026
Published “DIAMETER 1.06”” used
SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Diameter 1.07””
SilencerCo, Sparrow 22 spec sheet (SKU SU75; copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Diameter 1.062"”
Capitol Armory, Technical Specs, a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
The same page's description says "1.06\" diameter".
The manual's 1.06; the dealer's 1.062 agrees with it and not with the spec sheet's 1.07. The difference is 0.01 in.
spec-sheet and capitol differ by 0.008 in beyond what each states it is good to.
SilencerCo's two documents differ in the second decimal. A dealer's table gives 1.062, which is 1 1/16 in and rounds to the manual's.
Barrel thread length it is made for0.4 in 10.2 mmConfirmedPublished: SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026
Published “The Sparrow 22 mounts on conventional 1/2 X 28 (Class 3A) threads .400˝ in length” used
SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
What the mount is made to shoulder on. The manual says nothing about threads between this and the spacer's range.
Shortest barrel thread on which SilencerCo's rifle spacer is required0.6 in 15.2 mmConfirmedPublished: SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026
Published “The Delta Thread Rifle Spacer (AC114) is required on threads .600 ˝– .650˝ in length.” used
SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Page 4. The spec sheet lists it as shipped with the silencer ("Ships With: Delta Threaded Rifle Spacer 1/2×28").
Longest barrel thread for which SilencerCo's rifle spacer is given0.65 in 16.5 mmConfirmedPublished: SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026
Published “The Delta Thread Rifle Spacer (AC114) is required on threads .600 ˝– .650˝ in length.” used
SilencerCo, Sparrow 22 Field Manual (copy hosted by Silencer Central; a copy on file), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Exit bore, as it shows in the front face0.27 in ± 0.015 in 6.9 mmProvisionalPhoto: Primary Arms SU75_00, the muzzle end from an angle, 2200 x 1467
Photo 0.27 in ± 0.015 in used
Primary Arms SU75_00, the muzzle end from an angle, 2200 x 1467, harvested
Scale: the tube's silhouette across its axis at the front face, taken as od (1.06): 518 px there (it widens toward the lens: 482 px at mid-length). Read by same-plane ratio: the bore's dark hole is 130 px across the tube's axis (luminance below 28; the 50% edge is about a pixel outside), 0.251 of the tube's width at the face
Back cap, notches round its rim8ProvisionalPhoto: Primary Arms SU75_01, straight side view, 2200 x 1467
Photo 8 count used
Primary Arms SU75_01, straight side view, 2200 x 1467, harvested
Scale: the tube's diameter, taken as od (1.06): 394 px at the 200 level (372.6 px/in). Read by luminance profiles down the back cap at 0.06 to 0.22 in from its end and along the notch that faces the lens
Four show on the near half of the side photo, 55, 100 and 143 degrees round from the top edge and one near it: 45 degrees apart.
Back cap, notch width0.097 in ± 0.01 in 2.5 mmProvisionalPhoto: Primary Arms SU75_01, straight side view, 2200 x 1467
Photo 0.097 in ± 0.01 in used
Primary Arms SU75_01, straight side view, 2200 x 1467, harvested
Scale: the tube's diameter, taken as od (1.06): 394 px at the 200 level (372.6 px/in). Read by luminance profiles down the back cap at 0.06 to 0.22 in from its end and along the notch that faces the lens
The notch facing the lens: its lit floor is 36 px across.
Back cap, notch length from the rear face (to where its floor runs out at the cap's surface)0.25 in ± 0.02 in 6.3 mmProvisionalPhoto: Primary Arms SU75_01, straight side view, 2200 x 1467
Photo 0.25 in ± 0.02 in used
Primary Arms SU75_01, straight side view, 2200 x 1467, harvested
Scale: the tube's diameter, taken as od (1.06): 394 px at the 200 level (372.6 px/in). Read by luminance profiles down the back cap at 0.06 to 0.22 in from its end and along the notch that faces the lens
The same notch: its floor ends 93 px from the silhouette's end. On the near surface, so the end's 0.04 in of perspective and the surface's nearness about cancel.
A notch is a ramp, not a pocket: its floor is deepest at the rear face (notch_floor_across) and rises to the cap's surface here, 34 degrees to the axis by these two figures. Read again on 2026-10-05 from the rear face's own plane in the same photo (column 124.1: rear_face_d's second reading) with the notch's nearness to the lens taken out (it is 0.40 in nearer than the axis, the lens about 13.5 in away): 0.244.
Back cap, across two opposite notches' floors at the rear face0.712 in ± 0.02 in 18.1 mmCorroboratedPhoto: Primary Arms SU75_02, the mount end from an angle, 2200 x 1467
Photo 0.712 in ± 0.02 in used
Primary Arms SU75_02, the mount end from an angle, 2200 x 1467, harvested
Scale: a pinhole camera fitted to this photo by the part's own silhouette: f 6949 px, the rear face 13.1 in from the lens, the axis 51 deg off the line of sight. The rear face's plane then moved 0.035 in along the axis, so that the dark line round the thread's ring is a circle about the axis (235 points round 240 deg of it, rms 0.003 in). A published size in that plane as a check: the thread's mouth reads 0.478 in across, between the minor and major diameters of a 1/2-28 thread. Read by the rear face unwrapped through that camera, angle round the axis by distance from it in its plane: in the eight notches the flat ring's outer edge is a straight line 0.3525 to 0.359 in from the axis, mean 0.356. Drawn back over the photo with the flat's edge and its eight bites, the outline lies on the photo's (overlay-rear.png: looked at before the figure was used)
The ± is what the camera leaves open: fitted again with the point its axis meets the picture left free (camera.py free_pp: as good a fit of the silhouette, the lens 11.9 in off), the same floors read 0.010 in further from the axis and the flat's edge 0.006. That fit leaves the flat's edge less of a circle (it wanders 0.02 in round the far side, against 0.008), and the side view, which needs no camera, has this one's figures. The spread between the eight notches is 0.007 in across the pair.
Photo 0.71 in ± 0.02 in
Primary Arms SU75_01, straight side view, 2200 x 1467, harvested
Scale: for heights, the tube's diameter between its edges at the 200 level, 393.95 px, as od (1.06): 371.68 px/in; for depths toward the lens, the rear face's own rim, whose arc says the lens sees that end from 10.5 deg off square (rear_face_d's second reading: 68.7 px of outline to an inch toward the lens). Read by the rear end's outline row by row: where a notch has taken the rim away the outline stands 1.5 to 6 px inside the rim's arc, and over the notch 51 deg round from the top it is a straight line in the rear face's plane for 20 rows (rms 0.0014 in), 0.3548 in from the axis
One notch of the eight. A pixel of outline is 0.015 in toward the lens here, and the rear face's own column is known to 0.3 px: the ± is a pixel.
The photo that shows the rear face itself and all eight notches; the straight side view, read by its own scale, has the one notch it shows 0.002 nearer.
Each floor is flat across its notch and meets the rear face in a straight line; this is from one such line to the one opposite, twice its distance from the axis. The tube's surface is 0.53 from the axis and the rear flat's edge 0.426 (rear_face_d): a notch is 0.07 deep in the rear face and its floor 0.17 under the tube's surface there. Two photos and two methods, 0.002 apart. The reviewer of 2026-10-05 asked for this figure as the notches' depth; it was the one thing wanting to draw them.
Back cap, the rear flat's outer diameter (where its chamfer begins)0.852 in ± 0.016 in 21.6 mmCorroboratedPhoto: Primary Arms SU75_02, the mount end from an angle, 2200 x 1467
Photo 0.852 in ± 0.016 in used
Primary Arms SU75_02, the mount end from an angle, 2200 x 1467, harvested
Scale: a pinhole camera fitted to this photo by the part's own silhouette: f 6949 px, the rear face 13.1 in from the lens, the axis 51 deg off the line of sight. The rear face's plane then moved 0.035 in along the axis, so that the dark line round the thread's ring is a circle about the axis (235 points round 240 deg of it, rms 0.003 in). A published size in that plane as a check: the thread's mouth reads 0.478 in across, between the minor and major diameters of a 1/2-28 thread. Read by the rear face unwrapped through that camera (unwrap.py, edges.py, stats.py): on four teeth of the far side, where the flat's edge shows against the white ground, it is 0.4229, 0.4247, 0.4250 and 0.4307 in from the axis, mean 0.426
The ± is the spread between teeth (the centre is good to 0.004 in) and 1.2% for the camera's scale.
Photo 0.845 in ± 0.012 in
Primary Arms SU75_01, straight side view, 2200 x 1467, harvested
Scale: the tube's diameter between its edges at the 200 level, 393.95 px, as od (1.06): 371.68 px/in. Read by the rear end's outline row by row (side_fit.py): on the 207 rows clear of the notches it is the arc of one circle about the axis seen from off square, x = x_face - T sqrt(r^2 - y^2), with r 0.4223 ± 0.0010 in, the rear face at column 124.1 ± 0.3 and T 68.7 px to the inch (10.5 deg); rms 0.26 px
The ± is a pixel of the 200 level at each side, more than the fit's own.
Taken from the same photo and camera as the notches' floors, so that what the two differ by, the notch's depth in the rear face, carries no scale between photos. The side view agrees within 0.007 in.
The traced side outline has 0.81 here, and that is not the cap: the outline is cut 0.048 in inside the silhouette's rear tip (column 112.9), but the lens sees that end from 10.5 deg off square and the rear face is 0.078 in inside the tip (column 124.1), so the outline's last 0.03 in is the face's rim seen as an arc. The model's rear end is drawn from this figure and the three after it, not from the outline. The front end read the same way (side_front.py) has its face 0.052 in inside its tip, where the outline is cut: nothing to change there. Between the two faces the photo then reads 5.046 in at the tube's scale, 0.7% under the published 5.08, which the model keeps.
Back cap, the rear chamfer's forward end, from the rear face0.07 in ± 0.006 in 1.8 mmProvisionalPhoto: Primary Arms SU75_01, straight side view, 2200 x 1467
Photo 0.07 in ± 0.006 in used
Primary Arms SU75_01, straight side view, 2200 x 1467, harvested
Scale: the tube's diameter between its edges at the 200 level, 393.95 px, as od (1.06): 371.68 px/in. Read by the cap's upper and lower edges column by column, from the rear face at column 124.1 (rear_face_d's second reading): a line at 47 deg through columns 132 to 144 and a line at 15 deg through columns 156 to 174 meet at column 150.05, 0.0698 in ahead of the face; the steep line reaches the face 0.427 in from the axis, where the rim's arc has 0.4223
The ± is two pixels of where two fitted lines cross.
The cap's rim is two cones: a steep one from the rear flat's edge, then a shallow one up to its full diameter (rear_break_x).
Back cap, its diameter where the rear chamfer ends1.006 in ± 0.008 in 25.6 mmProvisionalPhoto: Primary Arms SU75_01, straight side view, 2200 x 1467
Photo 1.006 in ± 0.008 in used
Primary Arms SU75_01, straight side view, 2200 x 1467, harvested
Scale: the tube's diameter between its edges at the 200 level, 393.95 px, as od (1.06): 371.68 px/in. Read by where the same two lines cross (column 150.05): 0.503 in from the axis
Back cap, where its rim reaches the cap's full diameter, from the rear face0.149 in ± 0.008 in 3.8 mmProvisionalPhoto: Primary Arms SU75_01, straight side view, 2200 x 1467
Photo 0.149 in ± 0.008 in used
Primary Arms SU75_01, straight side view, 2200 x 1467, harvested
Scale: the tube's diameter between its edges at the 200 level, 393.95 px, as od (1.06): 371.68 px/in. Read by the 15 deg line through columns 156 to 174 reaches the cap's cylinder (0.524 in from the axis over columns 180 to 210) at column 179.6
The ± is three pixels: a shallow line meeting a level one.
The cap's own cylinder is 0.524 from the axis in this photo, 0.006 under the tube's 0.53: the traced outline has that step as a slow taper.
Back cap, the seam where it meets the tube, from the rear face0.445 in ± 0.02 in 11.3 mmProvisionalPhoto: Primary Arms SU75_01, straight side view, 2200 x 1467
Photo 0.445 in ± 0.02 in used
Primary Arms SU75_01, straight side view, 2200 x 1467, harvested
Scale: the tube's diameter between its edges at the 200 level, 393.95 px, as od (1.06): 371.68 px/in; the rear face at column 124.1 (rear_face_d's second reading). Read by the seam's dark line found on 73 rows across the tube and fitted as a circle about the axis seen from off square, column = plane - T sqrt(r^2 - y^2): the plane at column 286.3 with T free (51 px to the inch) and at 294.5 with the rear face's own 68.7; taken where the lens's 13.5 in puts it for this station (T about 58): column 289.5
The ± is the spread of the plane between the two values of T, and the fit's scatter (6 px a row: the line is faint).
For the colours (2026-10-06): the two caps are black oxide and the outer tube magnesium phosphate (Capitol Armory: "Black Oxide, Magnesium Phosphate (Outer Tube)"), and the photos show the difference: the model's caps are their own pieces from this seam and front_cap_seam_behind_face. The seam is a circle about the axis: on the near surface it shows as an arc, bowed toward the rear by how far the lens sees that end from off square.
Front cap, the seam where it meets the tube, behind the front face0.07 in ± 0.02 in 1.8 mmProvisionalPhoto: Primary Arms SU75_01, straight side view, 2200 x 1467
Photo 0.07 in ± 0.02 in used
Primary Arms SU75_01, straight side view, 2200 x 1467, harvested
Scale: the tube's diameter between its edges at the 200 level, 393.95 px, as od (1.06): 371.68 px/in; the front face at column 1999.6 (side_front.py, as rear_face_d's note has it), seen from 6 deg off square (39 px to the inch toward the lens). Read by the seam's dark line on 88 rows, each taken back to the seam's own plane by the near surface's depth at its row: 0.056 to 0.086 in behind the face, median 0.074
The ± covers the wave (0.015 in either way) and the angle the end is seen from (0.062 to 0.081 for 30 to 45 px to the inch).
The seam is waved (eight waves round the tube, as the photos show); this is the middle of the wave, and the model draws the seam straight there.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Muzzle thread
- Uppers
- Nordic Components 22RB .22 LR upper, 16" (fit unchecked), Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length (fit unchecked), BCM Standard 11.5" Carbine Barrel, Stripped (fit unchecked), BCM Standard 14.5" Mid Length Barrel, Stripped (fit unchecked), BCM Standard 16" Mid Length Barrel, Stripped (fit unchecked), Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System (fit unchecked), Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3" (fit unchecked), Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel (fit unchecked), Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9" (fit unchecked), Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5" (fit unchecked), Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16" (fit unchecked), Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO (fit unchecked), Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO (fit unchecked), Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO (fit unchecked)
- Barrels
- Taurus TX22 4.6 in Threaded Barrel (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Silencer Shop $296.00 Nov 21, 2026, stock not said
- Scheels $299.99 Oct 1, 2026, in stock that day
- Capitol Armory $349.00 Nov 21, 2026, in stock that day
- Primary Arms $296.65 Nov 21, 2026, out of stock that day
- KYGUNCO $296.65 Nov 21, 2026, out of stock that day