Barrel
Taurus TX22 4.6 in Threaded Barrel
The T.O.R.O.'s barrel: alloy steel, matte black, 4.6 in, threaded 1/2x28 with a 1:10 right-hand twist (Taurus: "Thread Pitch: 1/2x28 • Twist Rate: 1:10 RH Twist"). Taurus sells it with the T.O.R.O. slide as the conversion kit for the newer TX22 frames.

- Weight
- 4.86 oz ± 0.8 oz Provisionalworked out: The model's steel, 1.0639 cubic inches (pipeline/blender/taurus_tx22_barrel_46.py's manifest), times std.density.steel (4.565 oz to the cubic inch; Gun Tests: "BARREL MATERIAL Alloy Steel"): 4.857 oz. The ± is mostly the round barrel's assumed diameter (0.55 ± 0.04: 15% of its section) and the block's assumed width and bottom. app/tests/taurus-tx22-barrel-46.test.ts holds the model's volume to it.
- Lowest price
- Sold in the Taurus TX22 Gen 2 T.O.R.O., 22 LR, 4.6 in, Hard Anodized Black, not by itself
- Made for
- Caliber: .22 LR
- Colour
- Phosphate, black
- Drawn as
- modelled
- Maker's page
- shoptaurus.com
In “Taurus TX22 T.O.R.O.”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Barrel length as its maker states it4.6 in ± 0.005 in 116.8 mmCorroboratedPublished: Shooting News Weekly, Gun Review: Taurus TX22 T.O.R.O. .22LR Pistol (its specifications list), a review, read Nov 5, 2026
Published “Barrel Length: 4.6 inches”
Taurus shop, Taurus TX22 T.O.R.O. Upper Assembly Kit (TX22TOROKIT), its specifications, the maker, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “Barrel Length 4.6in”
Sportsman's Warehouse, Taurus TX22 Gen 2 TORO 22 Long Rifle 4.6in Hard Anodized Black Pistol (MPN 1-2TX22P141), a seller, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “Barrel Length: 4.60 in. (threaded)” used
Shooting News Weekly, Gun Review: Taurus TX22 T.O.R.O. .22LR Pistol (its specifications list), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “BARREL LENGTH 4.60 In.”
Gun Tests, Taurus TX22 T.O.R.O. Model Accepts Red Dots (its specifications table), a review, read Nov 5, 2026 the page, harvested Nov 5, 2026
All four print 4.6; Shooting News Weekly's and Gun Tests' print it to the hundredth (4.60), and the maker's shop's to the tenth.
Four pages print it, three of them for the whole T.O.R.O. (1-2TX22P141) and Taurus's own shop for this barrel in its conversion kit.
The muzzle thread's pitch0.036 in ± 0.00005 in 0.9 mmConfirmedPublished: Taurus shop, Taurus TX22 T.O.R.O. Upper Assembly Kit (TX22TOROKIT), its specifications, the maker, read Nov 5, 2026
Published “Thread Pitch: 1/2x28” used
Taurus shop, Taurus TX22 T.O.R.O. Upper Assembly Kit (TX22TOROKIT), its specifications, the maker, read Nov 5, 2026 the page, harvested Nov 5, 2026
Published “Thread Pitch 1/2 x 28”
Sportsman's Warehouse, Taurus TX22 Gen 2 TORO 22 Long Rifle 4.6in Hard Anodized Black Pistol (MPN 1-2TX22P141), a seller, read Nov 5, 2026 the page, harvested Nov 5, 2026
The maker's own shop; the seller states the same thread.
28 threads to the inch: 1/2-28.
The muzzle thread's major diameter (its crests)0.496 in ± 0.0033 in 12.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_major_d}
Worked out 0.4957 in ± 0.0033 in used
{bcm-16-mid-barrel.thread_major_d}, from the site owner
A 1/2-28 thread's crests, for the 1/2x28 Taurus states: the Army barrel's 1/2-28 (8448549 sheet 1, Section M-M: "1/2-28 UNEF-2A MAJOR DIA .4989/.4924"), as read for BCM's barrel's ledger, where the drawing and its page are cited. Taurus names no class.
The muzzle thread's minor diameter (its roots)0.455 in ± 0.002 in 11.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_minor_d}
Worked out 0.4551 in ± 0.002 in used
{bcm-16-mid-barrel.thread_minor_d}, from the site owner
8448549 sheet 1, Section M-M: "MINOR DIA .4551 MAX", as read for BCM's barrel's ledger.
The thread's shoulder, ahead of the breech face4.133 in ± 0.06 in 105 mmProvisionalWorked out: {taurus-tx22-toro-slide.length} - {taurus-tx22-toro-slide.breech_x}
Worked out 4.133 in ± 0.06 in used
{taurus-tx22-toro-slide.length} - {taurus-tx22-toro-slide.breech_x}, harvested
The slide's front face, from the barrel's breech face: where the protector's rear face goes out of sight in both side views.
Where the protector's rear face bears: hidden in the photos at the slide's front face (the protector's silhouette runs at its full height right up to the slide's face in both side views, and a dark ring round it in the obliques is the face's own recess). Taken at the slide's front face.
Threaded end, shoulder to muzzle face0.467 in ± 0.08 in 11.9 mmProvisionalWorked out: {.stated_length} - {.shoulder_x}
Worked out 0.467 in ± 0.08 in used
{.stated_length} - {.shoulder_x}, harvested
On no page (the discovery's gap). Worked out: the maker's barrel length less where the shoulder stands.
The round barrel's outside diameter, through the slide's nose0.55 in ± 0.04 in 14 mmProvisionalWorked out: An assumption for the drawing, not a reading: a bull barrel between its thread's crests (0.496) and the thread protector's silhouette (0.59), whose rear face bears on its shoulder; the side vents show it filling their height (0.27 in) with its highlight under their top edge.
Worked out 0.55 in ± 0.04 in used
An assumption for the drawing, not a reading: a bull barrel between its thread's crests (0.496) and the thread protector's silhouette (0.59), whose rear face bears on its shoulder; the side vents show it filling their height (0.27 in) with its highlight under their top edge., harvested
American Rifleman: "The TX22 Black has a threaded bull barrel, which is the same barrel profile as the Competition model". Its full silhouette shows in no photo on file: the nose hides it, and the vents show its middle only.
The chamber block's top above the bore axis0.31 in ± 0.02 in 7.9 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 0.31 in ± 0.02 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame at the middle plane (158.8 px/in on the near face, 1.7% less on the middle plane). Read by the silhouette's top at row 249.5 to 250 between x 500 and 690 (the slide's walls below it) against the protector's middle at row 298.5
Photo 0.308 in ± 0.02 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, harvested
Scale: the pin frame (157.2 px/in), rolled 1.1 degrees. Read by the silhouette's top at row 259 to 262 between x 500 and 660 against the protector's middle carried back along the slide's lower edge (row 309 at x 580)
The two agree; the left view isn't rolled.
In the slide's open middle section the block stands above both walls: its top is the pistol's silhouette there in both black side views.
The chamber block's front end, ahead of the breech face1.467 in ± 0.06 in 37.3 mmProvisionalWorked out: {taurus-tx22-toro-slide.nose_rear_x} - {taurus-tx22-toro-slide.breech_x}
Worked out 1.467 in ± 0.06 in used
{taurus-tx22-toro-slide.nose_rear_x} - {taurus-tx22-toro-slide.breech_x}, harvested
The block's top silhouette runs from the slide's rear block to the nose's rear face in the left view; in the right-front oblique (7c0111a45816) its front step stands at the nose's rear face.
Where the block steps down to the round barrel, just inside the slide's nose: the right-front oblique shows the step at the nose's rear face.
The chamber block's width across0.58 in ± 0.08 in 14.7 mmProvisionalWorked out: An assumption for the drawing, not a reading: the block fills the slide's open channel between its walls in the right-front oblique (7c0111a45816), its right face ("22 LR") a little inside the port's rim.
Worked out 0.58 in ± 0.08 in used
An assumption for the drawing, not a reading: the block fills the slide's open channel between its walls in the right-front oblique (7c0111a45816), its right face ("22 LR") a little inside the port's rim., harvested
The chamber block's bottom below the bore axis0.3 in ± 0.08 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: the block's lower part is inside the frame and the slide ("the barrel is stabilized against the frame", American Rifleman); drawn down to the slide's lower edge.
Worked out 0.3 in ± 0.08 in used
An assumption for the drawing, not a reading: the block's lower part is inside the frame and the slide ("the barrel is stabilized against the frame", American Rifleman); drawn down to the slide's lower edge., harvested
The bore's diameter0.218 in ± 0.006 in 5.5 mmCorroboratedWorked out: {nordic-22rb-upper.bore_d}
Worked out 0.218 in ± 0.006 in used
{nordic-22rb-upper.bore_d}, harvested
Another .22 LR barrel's bore, as read for the Nordic 22RB's ledger: no page gives this one's. The thread protector's front face shows a hole a little larger.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
TX22 barrel in its slide
Muzzle thread
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake, HUXWRX Flash Hider-QD 556 1/2x28, Mil-spec A2 flash hider, 1/2-28 (drawing 9349051), Nordic Components 1/2-28 thread protector (ships on the 22RB), Otter Creek Labs Polonium, Otter Creek Labs Polonium K, Precision Armament M4-72 Severe-Duty® Compensator, SilencerCo Sparrow 22 (fit unchecked), SureFire ProComp 556 Muzzle Brake, SureFire SOCOM 3-Prong Flash Hider, SureFire SOCOM 4-Prong Flash Hider, SureFire WARCOMP Flash Hider, Taurus TX22 Thread Protector, VG6 Precision GAMMA 556