Muzzle device
Nordic Components 1/2-28 thread protector (ships on the 22RB)
The fluted stainless sleeve the 22RB kit ships with on its 1/2-28 muzzle thread, open at the front: the barrel's end shows in its mouth. It is the muzzle slot's part until a suppressor or a flash hider takes its place.

- Weight
- Counted in the weight of the Nordic Components 22RB .22 LR upper, 16", which it comes with
- Lowest price
- No price on file
- Colour
- Natural stainless
- Drawn as
- modelled
In “22RB .22 LR rifle”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length, from the barrel's shoulder (its seam with the barrel) to its face0.511 in ± 0.016 in 13 mmConflictWorked out: {nordic-22rb-upper.muzzle_thread_length} + {nordic-22rb-upper.muzzle_face_behind_protector}
Photo 0.47 in ± 0.02 in
left side, NC22RB-UPPER-16-KIT_3_HR, harvested
Scale: rail model from 01-2b348f6a5149.calib.json (0.0010 in rms, drift -0.99%), anchored at takedown lug (1853.5,1074.5) = frame x 0; 0.0118 in/px at the muzzle. Read by the seam's dark line to the face's silhouette on rows within 0.15 in of the axis (0.458–0.470)
Both ends are read on the near side of the part, at the axis's height, so the photo's perspective moves them alike (40 px between them, row by row).
Worked out 0.511 in ± 0.016 in used
{nordic-22rb-upper.muzzle_thread_length} + {nordic-22rb-upper.muzzle_face_behind_protector}, from the site owner
A sleeve seated on the barrel's shoulder with the muzzle face flush in its mouth is as long as the threaded end (0.506 on the user's own barrel, bare, by its thread's pitch) and the face's setback. The user's close photo of the muzzle (6d62ff2e1c20) has it 0.50 to 0.52; their far ones 0.48 ± 0.03.
The barrel's threaded end, measured bare on the user's own upper, and the flush face; the product photo's 0.47 ± 0.02 is read across a seam seen at an angle.
left and thread differ by 0.041 in beyond what each states it is good to.
OD0.736 in ± 0.01 in 18.7 mmCorroboratedPhoto: the user's own 22RB, each side, from 5 to 7 ft, the protector on its muzzle; 2026-10-03
Photo “about 0.73 in”
not yet archived, from the project brief
Scale: not recorded in brief. Read by calibrated photo measurement
Photo 0.717 in ± 0.012 in
left side, NC22RB-UPPER-16-KIT_3_HR via Aerospace Arms, harvested
Scale: top-rail Picatinny slots: 49 slots, 83.9 px/in, cubic fit rms 0.001 in. Read by silhouette plateau over the last 1.0 in (thread protector + barrel); cylinder silhouettes are unaffected by camera elevation. ± is 1 px
Photo 0.711 in ± 0.02 in
right side, Nordic NC22-16-Upper-V2, harvested
Scale: top-rail Picatinny slots: 37 slots, 50.0 px/in, rms 0.017 in. Read by silhouette plateau over the last 1.0 in
Photo 0.736 in ± 0.01 in used
the user's own 22RB, each side, from 5 to 7 ft, the protector on its muzzle; 2026-10-03, from the site owner
Scale: the rail's 49 slots and the two lug holes in one fitted camera pose (nordic-22rb-upper.rail_slot0_x#user). Read by across its silhouette: 0.732, 0.735, 0.737, 0.737, 0.739
The user's own protector in five photos, within 0.007 of each other.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Muzzle thread
- Uppers
- Nordic Components 22RB .22 LR upper, 16", Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
- Barrels
- Taurus TX22 4.6 in Threaded Barrel