Barrel
Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
Rosco's 12.5 in Bloodline barrel: 4150 chrome moly vanadium steel, a 5.56 NATO chamber, 1/7 twist, nitrided inside and out with its M4 extension, a carbine-length gas port on a .750 in journal with one dimple under it, a 1/2 x 28 muzzle thread behind an 11 degree crown.

- Weight
- 21.79 oz ± 0.005 oz Confirmedpublished: Rosco Manufacturing, Bloodline 12.5" M4 5.56 NATO (BL-125-M4-556-7-C), Description: the specification list, the maker, read Oct 6, 2026
- Lowest price
- $154.80 at MidwayUSA, read Oct 30, 2026
- Made for
- Bloodline 12.5” M4 5.56 NATO
- Maker's number
- BL-125-M4-556-7-C
- Colour
- Black nitride
- Drawn as
- modelled
- Maker's page
- roscomanufacturing.com
In “BCM 11.5 in carbine, suppressed”, a build on the start page, in place of its BCM Standard 11.5" Carbine Barrel, Stripped.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Barrel length as its maker states it12.5 in ± 0.05 in 317.5 mmConfirmedPublished: Rosco Manufacturing, Bloodline 12.5" M4 5.56 NATO (BL-125-M4-556-7-C), Description: the specification list, the maker, read Oct 6, 2026
Published “Barrel Length 12.5″” used
Rosco Manufacturing, Bloodline 12.5" M4 5.56 NATO (BL-125-M4-556-7-C), Description: the specification list, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Barrel Length 12.5”
Primary Arms, Rosco Manufacturing Bloodline 5.56 AR-15 Barrel - Carbine - Government - 12.5" (BL-125-M4-556-7-C), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “"name":"Length","value":"12.5 Inches"”
MidwayUSA, Rosco Manufacturing Bloodline AR-15 Barrel 5.56x45mm NATO 12.5" M4 Contour 1:7" Twist Black Nitride (product 407128, BL-125-M4-556-7-C), the page's product data, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own; two sellers repeat it.
The nominal length. Rosco's page doesn't say between which points; the Army's barrel drawing (8448549) dimensions a barrel from its breech end, inside the extension, to its muzzle, and overall_length takes it so (as the catalog's other barrels do).
The gas block journal's diameter0.75 in ± 0.0005 in 19 mmConfirmedPublished: Rosco Manufacturing, Bloodline 12.5" M4 5.56 NATO (BL-125-M4-556-7-C), Description: the specification list, the maker, read Oct 6, 2026
Published “Gas Block Size .750” used
Rosco Manufacturing, Bloodline 12.5" M4 5.56 NATO (BL-125-M4-556-7-C), Description: the specification list, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “We currently machine the “journal” or seating area to accommodate a .750 diameter gas block for all our barrels.”
Rosco Manufacturing, FAQ's: What is the size of the Gas Block seating area for your barrels?, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “.750" gas seat diameter”
Primary Arms, Rosco Manufacturing Bloodline 5.56 AR-15 Barrel - Carbine - Government - 12.5" (BL-125-M4-556-7-C), Features, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own, on this barrel's page; its FAQ says the same of every barrel, and the seller repeats it.
The gas block dimple's centre ahead of the journal's rear shoulder0.295 in ± 0.0005 in 7.5 mmConfirmedPublished: Rosco Manufacturing, FAQ's: Do you dimple your barrels for Gas Blocks?, the maker, read Oct 6, 2026
Published “Yes we do, but we only machine one dimple that is perfectly centered and matched to a backspace of .295.” used
Rosco Manufacturing, FAQ's: Do you dimple your barrels for Gas Blocks?, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Rosco's FAQ, of every barrel it makes: one dimple, under the journal, "perfectly centered": taken as centred on the gas port opposite it (a buyer on Primary Arms' page for the 11.5: "Index pin is in line with the gas port"; Primary Arms' photos have the port on the marked side and the dimple, bare steel, opposite it at the same place). The one published figure for where the port is: gas_port_x is the shoulder as read plus this.
The barrel extension's rear end behind the barrel's breech end0.501 in ± 0.01 in 12.7 mmProvisionalWorked out: {std.ar15.barrel_extension_behind_breech}
Worked out 0.501 in ± 0.01 in used
{std.ar15.barrel_extension_behind_breech}, from the site owner
The standard's: the reference CAD set's extension less the Army barrel's tenon (std.ar15.barrel_extension_behind_breech), the one figure the catalog's 5.56 barrels take their breech from. Primary Arms, for this number: "nitride-finished M4 barrel extension".
The bore's diameter (across the lands)0.219 in ± 0.001 in 5.6 mmConfirmedWorked out: {bcm-16-mid-barrel.bore_d}
Worked out 0.219 in ± 0.001 in used
{bcm-16-mid-barrel.bore_d}, from the site owner
The Army barrel's, as BCM's barrel's ledger read it off the drawing (8448549 sheet 2: .219 DIA): a 5.56 NATO bore. Rosco publishes none.
The barrel indexing pin's diameter0.125 in ± 0.002 in 3.2 mmProvisionalWorked out: {bcm-16-mid-barrel.index_pin_d}
Worked out 0.125 in ± 0.002 in used
{bcm-16-mid-barrel.index_pin_d}, from the site owner
The reference CAD set's pin, as BCM's barrel's ledger read it: a mil-spec extension's.
The barrel extension's rear opening, its diameter at the rear face0.77 in ± 0.005 in 19.6 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_d}
Worked out 0.77 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_d}, from the site owner
The inside of a mil-spec M4 extension as the reference CAD set has it, read once for BCM's barrel, for how the rear end looks. Appearance only.
The rear opening's chamfer, its depth (at 45°)0.045 in ± 0.005 in 1.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_chamfer}
Worked out 0.045 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_chamfer}, from the site owner
The circle the extension's locking lugs leave between their tips0.572 in ± 0.003 in 14.5 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_bore_d}
Worked out 0.572 in ± 0.003 in used
{bcm-16-mid-barrel.extension_lug_bore_d}, from the site owner
The locking lugs' front faces, ahead of the extension's rear end0.214 in ± 0.005 in 5.4 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_depth}
Worked out 0.214 in ± 0.005 in used
{bcm-16-mid-barrel.extension_lug_depth}, from the site owner
The recess ahead of the lugs, which the bolt's lugs turn in: its diameter0.83 in ± 0.003 in 21.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_d}
Worked out 0.83 in ± 0.003 in used
{bcm-16-mid-barrel.extension_recess_d}, from the site owner
The recess's front end, ahead of the extension's rear end0.595 in ± 0.005 in 15.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_depth}
Worked out 0.595 in ± 0.005 in used
{bcm-16-mid-barrel.extension_recess_depth}, from the site owner
The muzzle thread's major diameter (its crests)0.496 in ± 0.0033 in 12.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_major_d}
Worked out 0.4957 in ± 0.0033 in used
{bcm-16-mid-barrel.thread_major_d}, from the site owner
The Army barrel's 1/2-28 thread (8448549 sheet 1, as BCM's barrel's ledger read it), for the 1/2 x 28 Rosco states: what the model's thread is drawn at.
The muzzle thread's minor diameter (its roots)0.455 in ± 0.002 in 11.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_minor_d}
Worked out 0.4551 in ± 0.002 in used
{bcm-16-mid-barrel.thread_minor_d}, from the site owner
The muzzle thread's pitch0.036 in ± 0.00005 in 0.9 mmConfirmedPublished: Rosco Manufacturing, Bloodline 12.5" M4 5.56 NATO (BL-125-M4-556-7-C), Description: the specification list, the maker, read Oct 6, 2026
Published “Barrel Thread 1/2 x 28” used
Rosco Manufacturing, Bloodline 12.5" M4 5.56 NATO (BL-125-M4-556-7-C), Description: the specification list, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “5.56 are threaded to ½ X 28”
Rosco Manufacturing, FAQ's: What thread pattern do you use for your barrels?, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
This barrel's own page; the FAQ says the same of every 5.56 barrel.
28 threads to the inch, by the maker's statement.
The muzzle crown's angle (its face's cone, from square to the bore)11° ± 0.5°ConfirmedPublished: Rosco Manufacturing, Bloodline 12.5" M4 5.56 NATO (BL-125-M4-556-7-C), Description: the specification list, the maker, read Oct 6, 2026
Published “Barrel Crown 11 Degree” used
Rosco Manufacturing, Bloodline 12.5" M4 5.56 NATO (BL-125-M4-556-7-C), Description: the specification list, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Threaded 1/2x28, 11-degree crown”
Primary Arms, Rosco Manufacturing Bloodline 5.56 AR-15 Barrel - Carbine - Government - 12.5" (BL-125-M4-556-7-C), Features, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own; the seller repeats it.
Rosco's FAQ: "For the Bloodline barrels we use a 11 degree “service” crown." How far out across the muzzle's face it reaches isn't published.
The gas port's diameter0.073 in ± 0.01 in 1.9 mmProvisionalPublished: A buyer's review on Primary Arms' page for the 11.5 in barrel, BL-115-M4-556-7-C (2021-11-02), a review, read Oct 6, 2026
Published “.073 gas port Concentric threads Index pin is in line with the gas port” used
A buyer's review on Primary Arms' page for the 11.5 in barrel, BL-115-M4-556-7-C (2021-11-02), a review, read Oct 6, 2026 the page, harvested Oct 6, 2026
Rosco withholds it (FAQ: "Unfortunately, we cannot disclose more seeing as these measurements are proprietary production information."), and says it is sized to each barrel. The one figure on file is a buyer's for the 11.5 in barrel, in a review on Primary Arms' page for that one, no instrument named: this 12.5 in barrel's own port isn't known, and the model cuts a hole of that size so that there is one.
The straight section between the chamber and the collar, its diameter0.666 in ± 0.004 in 16.9 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.666 in ± 0.004 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: its gas block journal's diameter, 114.61 px (the median over the journal's columns, the silhouette at grey 235), as the published .750 (journal_od). Read by the straight section's width as a line along the photo, fitted over columns 1069 to 1339 (101.69 px) and 1399 to 1653 (101.53 px), rms 0.16 px, carried on to the journal's columns: 101.71 px there, 0.8875 of the journal's
The scale of the traced outline: this section, a cylinder, is what each column of the photo is scaled by (`calibrate: tube`). Its own diameter is read against the journal's published .750 on the same photo. That it is a cylinder is taken, and checked by what it predicts at the two ends of the barrel: the extension's body 1.010 (the Army's limit .999), the flange 1.186 (the reference CAD set's 1.170), the thread's crests 0.486 (the Army's 1/2-28: .4924 to .4989). The three Bloodlines' photos, each read on its own, give this section 0.662 (10.5), 0.665 (11.5), 0.666 (12.5).
End to end, the extension's rear to the muzzle13.001 in ± 0.06 in 330.2 mmProvisionalWorked out: {.length} + {.extension_behind_breech}
Photo 13 in ± 0.06 in
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`). Read by its two end faces, each behind its rim's arc, at the tube's own scale with the lens's axis taken at the image's middle (tools/trace.py: read 13.005)
Worked out 13.001 in ± 0.06 in used
{.length} + {.extension_behind_breech}, harvested
Lengths at the published length, as the catalog's other barrels have them, so that barrels of different makers stand on one breech; the photo's own scale agrees with it within what the photo leaves open.
The published length from the barrel's breech end, and the extension's half inch behind that. The photo at its own scale (the journal's .750, through the straight section) reads +0.0% of it between its end faces: within what the end faces, the yaw's cosine and the lens's place leave open. The outline's lengths are set to the published figure, as the catalog's other barrels' are.
The barrel extension's body, its diameter (what goes into the receiver)0.999 in ± 0.001 in 25.4 mmConflictWorked out: {bcm-16-mid-barrel.extension_od}
Worked out 0.999 in ± 0.001 in used
{bcm-16-mid-barrel.extension_od}, from the site owner
An upper limit: it goes into the receiver's 1.000 bore.
Photo 1.01 in ± 0.006 in
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`). Read by the extension's body, the median of its height from a quarter to three quarters of an inch ahead of its rear face
An extension over 1.000 doesn't go into a receiver: the photo reads its breech end 1% large, and the drawing's limit is what an M4 extension is made to.
tdp and photo differ by 0.011 in beyond what each states it is good to.
The photo reads this barrel's breech end 1% large: over the Army drawing's limit for an extension (8448548, as BCM's barrel's ledger read it: not to exceed .9990), as its flange is over the reference CAD set's (1.186 against 1.170) and its chamber section over its two siblings' (0.99 against 0.98). The straight section's own width doesn't show a yaw in this photo, but the breech end is nearer the lens all the same; the model takes the drawing's limit here and brings the outline behind the straight section's middle down in proportion.
The barrel extension's flange, its diameter1.186 in ± 0.007 in 30.1 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 1.186 in ± 0.007 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`). Read by the flange's greatest height, on the lower of the two edges at each column (the pin, where it shows, is on one)
The reference CAD set's flange is 1.170 across: this photo reads its breech end 1% large (see extension_od), and the model brings it down with the rest of that end.
The chamber section ahead of the flange, its diameter0.992 in ± 0.006 in 25.2 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.992 in ± 0.006 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`). Read by the median of its height over a third of an inch, a quarter inch ahead of the flange
The cylinder ahead of the flange, before the cone down to the straight section.
The collar behind the gas block journal, its diameter0.857 in ± 0.006 in 21.8 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.857 in ± 0.006 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`). Read by the median of its height over its cylinder
A gas block's rear face comes back to its front face. A curved ramp leads up to it from the straight section.
The diameter behind the muzzle thread0.72 in ± 0.006 in 18.3 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.72 in ± 0.006 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`). Read by the median of its height from a third to an eighth of an inch behind the muzzle shoulder
The section between the journal's front end and the muzzle shoulder: a little under the journal's .750, so a gas block slides on over it.
The barrel extension's rear end, from the flange's rear face (negative: inside the receiver)-1.02 in ± 0.02 in -25.9 mmConflictPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo -1.02 in ± 0.02 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the rear end's face, behind its rim's arc (the tool's end_face: the silhouette's tip at column 2105, the face 0.103 in ahead of it: that end is seen from 12° off square), to the flange's rear face (column 1934.0: the flange's rim fitted as an ellipse between the body's radius and its own, seen from 15° off square)
Worked out -0.99 in ± 0.007 in
{std.ar15.barrel_extension_flange_thickness} - {std.ar15.barrel_extension_length}, from the site owner
A mil-spec extension as the reference CAD set has it: the standard's, not this barrel's.
This barrel's own photo, which the outline is cut and placed by; it stands 0.03 from the standard extension's, and the note says why it is doubted.
photo and model differ by 0.03 in beyond what each states it is good to.
The photo reads this extension 0.03 longer behind its flange than the reference CAD set's (0.990) and 0.04 to 0.05 longer than its two siblings' photos read the same M4 extension (0.972 and 0.980). The rear rim's arc is what is in doubt: the tool reads that end as seen from 12° off square where the flange an inch ahead of it is seen from 15°, and the feed ramps' cuts take the top of that rim out of the silhouette; with the flange's angle the face would be 0.03 further forward. The outline is cut and placed by the photo's reading all the same (the whole of it hangs together by that face), and the difference, hidden inside the receiver, stays visible here: with it the muzzle stands 0.05 in short of a whole inch ahead of the 11.5 in barrel's.
The extension flange's front face, ahead of its rear face (the flange's thickness)0.081 in ± 0.015 in 2.1 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.081 in ± 0.015 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the flange's rear face (column 1934.0) to its front face (column 1921.7), each where its rim's ellipse, fitted on the silhouette between the neighbour's radius and the flange's, comes to the flange's full radius
The reference CAD set's flange is 0.131 thick; BCM's barrel read 0.095. At mid-height the silhouette is twice this wide: each face's rim is an ellipse, the rear one's near half standing behind its face and the front one's far half ahead of it.
Where the cone ahead of the chamber section begins, ahead of the extension's face0.791 in ± 0.03 in 20.1 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.791 in ± 0.03 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the flange's rear face (column 1934.0) to where the line through the cone's middle (between a fifth and four fifths of its drop) meets the chamber section's diameter (column 1813.4)
The cone is straight: a line through its middle meets the chamber section's cylinder here.
Where that cone ends and the straight section begins, ahead of the extension's face1.649 in ± 0.03 in 41.9 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 1.649 in ± 0.03 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the flange's rear face (column 1934.0) to where the same line meets the straight section's diameter (column 1682.8)
Where the ramp up to the collar leaves the straight section, ahead of the extension's face5.932 in ± 0.04 in 150.7 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 5.932 in ± 0.04 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the flange's rear face (column 1934.0) to where the height first stands 0.006 over the straight section's (column 1029.0)
The ramp is curved: shallow where it leaves the straight section, steeper into the collar. The model follows the outline along it.
Where the ramp reaches the collar's cylinder, ahead of the extension's face6.313 in ± 0.03 in 160.4 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 6.313 in ± 0.03 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the flange's rear face (column 1934.0) to where the height comes within 0.006 of the collar's (column 970.9)
The gas block journal's rear shoulder (the collar's front face) ahead of the extension's face6.932 in ± 0.03 in 176.1 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 6.932 in ± 0.03 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the flange's rear face (column 1934.0) to the collar's front face (column 876.3): the collar's rim fitted as an ellipse on the silhouette between the journal's radius and the collar's (seen from 13° off square, rms 0.001 in)
A gas block's rear face comes back to this shoulder, and Rosco places the dimple, and with it the port, from it (dimple_backspace). The three Bloodlines' own photos put it 6.91 (10.5), 6.94 (11.5), 6.93 (12.5) in ahead of the receiver: one carbine port.
The gas block journal's front end (where the barrel steps down) ahead of the extension's face8.928 in ± 0.03 in 226.8 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 8.928 in ± 0.03 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the flange's rear face (column 1934.0) to where the height is midway between the journal's and the next section's (column 568.2), less its rim's arc there (0.018)
The journal is 2.00 long; ahead of it the barrel is 0.720 across to the muzzle shoulder. The step is a short cone, a tenth of an inch long.
The gas port ahead of the extension's face7.227 in ± 0.03 in 183.6 mmProvisionalWorked out: {.journal_rear_x} + {.dimple_backspace}
Worked out 7.227 in ± 0.03 in used
{.journal_rear_x} + {.dimple_backspace}, harvested
The shoulder as the photo has it, and the maker's figure from there.
Rosco gives no distance from the receiver; its FAQ gives the dimple's from the journal's shoulder (dimple_backspace, .295), and the dimple is opposite the port. From the barrel's breech end this port is 7.75 in. This photo doesn't show the dimple (it is turned away from the lens); Primary Arms' other views of this barrel show the port and the dimple on the journal just ahead of the collar, and aren't measured.
The muzzle shoulder ahead of the extension's face11.389 in ± 0.04 in 289.3 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 11.389 in ± 0.04 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the flange's rear face (column 1934.0) to the muzzle shoulder's face (column 194.1): where the thread's edge meets the shoulder's silhouette and up to 0.035 under its rim, the silhouette is the rim's arc, an ellipse about the face at the obliquity its neighbours give (14°); 10 points agree on the face to 0.002 in. The ± is the obliquity's and the length's scale
Where the thread begins: a muzzle device or its washer seats here. The lens sees it from well off square: at mid-height the silhouette stands ahead of the face by its rim's arc.
The muzzle thread's length0.592 in ± 0.04 in 15 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.592 in ± 0.04 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the shoulder's face (column 194.1) to the muzzle's face, behind its rim's arc (the tool's end_face: the tip at column 94, seen from 14° off square)
The Army barrel's is .63 (8448549); BCM's barrel read 0.50.
The barrel indexing pin's axis behind the flange's rear face0.095 in ± 0.015 in 2.4 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.095 in ± 0.015 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`); lengths by (u − 1099.5)/width, then by 0.9997, which puts the two end faces the published 12.5 in and the extension's 0.501 apart (overall_length). Read by the pin's rear edge on the lower silhouette (column 1958; the barrel lies with its pin down in the photo) to the flange's rear face (column 1934.0): 0.157, less half index_pin_d
The reference CAD set has the pin's axis 0.0765 behind the flange's rear face (0.2075 behind its front face).
The barrel indexing pin's top above the bore's axis0.594 in ± 0.008 in 15.1 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.594 in ± 0.008 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the straight section between the chamber and the collar as barrel_od (0.666), its width a line along the photo (101.69 px over columns 1069 to 1339, 101.53 px over 1399 to 1653): each column scaled by that line (tools/trace.py's `calibrate: tube`). Read by the pin's end on the lower silhouette, columns 1943 to 1958: its greatest distance from the axis
A little under the flange's radius, as on BCM's barrel (0.584).
The extension's rear face in the traced outline's own frame (from the silhouette's rear tip)0.103 in ± 0.01 in 2.6 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.103 in ± 0.01 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from rosco-bloodline-125-barrel.barrel_od = 0.666 in, the tube's own width column by column: 101.7 px over columns 1069–1339, 101.5 px over columns 1399–1653; a line through them (rms 0.16 px) changes -0.1% from column 1069 to 1653, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 152.6 px/in there. The axis is the tube's centre line (tilt -0.01°, rms 0.07 px). Lengths then scaled by 0.9997 so that the end faces are rosco-bloodline-125-barrel.overall_length = 13.001 in apart: at the tube's scale they read 13.005 (+0.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.077 in over radius 0.236 (rms 0.002), the rear end's rim sags 0.103 in over radius 0.501 (rms 0.003). Read by the min end's face: the silhouette's tip at -0.000 less its rim's arc, 0.103 in of sag at radius 0.501251 (the end is seen from 11.6° off square; arc fitted over 119 rows, rms 0.003) of the traced outline (tools/trace.py); the extension's rear face in the outline's own frame (from its rear tip)
The muzzle's face in the traced outline's own frame (from the silhouette's rear tip)13.104 in ± 0.091 in 332.8 mmProvisionalPhoto: Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 13.104 in ± 0.091 in used
Primary Arms' gallery, BL-125-M4-556-7-C_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from rosco-bloodline-125-barrel.barrel_od = 0.666 in, the tube's own width column by column: 101.7 px over columns 1069–1339, 101.5 px over columns 1399–1653; a line through them (rms 0.16 px) changes -0.1% from column 1069 to 1653, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 152.6 px/in there. The axis is the tube's centre line (tilt -0.01°, rms 0.07 px). Lengths then scaled by 0.9997 so that the end faces are rosco-bloodline-125-barrel.overall_length = 13.001 in apart: at the tube's scale they read 13.005 (+0.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.077 in over radius 0.236 (rms 0.002), the rear end's rim sags 0.103 in over radius 0.501 (rms 0.003). Read by the max end's face: the silhouette's tip at 13.181 less its rim's arc, 0.077 in of sag at radius 0.236069 (the end is seen from 18.1° off square; arc fitted over 118 rows, rms 0.002) of the traced outline (tools/trace.py); the muzzle's face in the outline's own frame (from its rear tip)
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Barrel extension
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Muzzle thread
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake, HUXWRX Flash Hider-QD 556 1/2x28, Mil-spec A2 flash hider, 1/2-28 (drawing 9349051), Nordic Components 1/2-28 thread protector (ships on the 22RB), Otter Creek Labs Polonium, Otter Creek Labs Polonium K, Precision Armament M4-72 Severe-Duty® Compensator, SilencerCo Sparrow 22 (fit unchecked), SureFire ProComp 556 Muzzle Brake, SureFire SOCOM 3-Prong Flash Hider, SureFire SOCOM 4-Prong Flash Hider, SureFire WARCOMP Flash Hider, Taurus TX22 Thread Protector, VG6 Precision GAMMA 556
Gas block journal
- Gas blocks
- Aero Precision .750 low profile gas block, BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers, BCM Low Profile Gas Block (steel with set screws) 750, SLR Rifleworks Sentry 7 Set Screw Adjustable Gas Block, Superlative Arms .750" Adjustable Gas Block, Bleed Off - Set Screw
Gas system length
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- MidwayUSA $154.80 Oct 30, 2026, in stock that day
- Rifle Supply $129.99 Nov 21, 2026, out of stock that day
- AR15Discounts $149.95 Nov 21, 2026, out of stock that day
- Primary Arms $154.80 Nov 21, 2026, out of stock that day