Gas tube
Aero Precision Gas Tube, Carbine Length
Aero Precision's gas tube for a carbine-length gas system, 9.75 in, with its roll pin: stainless steel, or the same tube in black Melonite. Aero: "Stainless Steel Gas Tube for AR15 & AR10 rifles".

- Weight
- 0.5 oz ± 0.05 oz Confirmedpublished: Aero Precision, Gas Tube, Carbine Length - Stainless Steel (APRH100017C), Specifications, the maker, read Oct 6, 2026
- Lowest price
- $19.00 at Aero Precision, read Nov 21, 2026 (Stainless Steel)
- Maker's number
- APRH100017C
- Colours
- Stainless Steel, Melonite
- Drawn as
- modelled
- Maker's page
- aeroprecisionusa.com
In “BCM 11.5 in carbine, suppressed”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length9.75 in ± 0.005 in 247.6 mmConfirmedPublished: Aero Precision, Gas Tube, Carbine Length - Stainless Steel (APRH100017C), Features, the maker, read Oct 6, 2026
Published “9.75"” used
Aero Precision, Gas Tube, Carbine Length - Stainless Steel (APRH100017C), Features, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Carbine length 9.8"”
Aero Precision, Gas Tube, Carbine Length - Melonite (APRH100281C), Features, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Pistol length 6.6875", Carbine length 9.8", Mid-Length 11.75”, Rifle length 15.125"”
Aero Precision, Stainless Steel Gas Tubes (APPG100027, the four lengths), Features, the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The same line is on the Melonite Gas Tubes page (https://www.aeroprecisionusa.com/gas-tube-melonite).
Published “Length: 9.8 Inches”
MidwayUSA, Aero Precision Gas Tube Carbine Length AR-15 Stainless (its number 924189, the maker's APRH100017C), the product's data on its page, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The same table says "Gas System Length: Carbine"; its melonite tube's (116459) says "Length: 9.8 Inches" too.
The figure on this tube's own page, and the one given to the hundredth; 9.8 is the same length to a tenth, on the other finish's page and in the lists. What the app draws by either differs by 0.05 in at the tube's rear end, inside the receiver.
Aero states it two ways: 9.75 on the stainless carbine tube's own page, 9.8 on the melonite tube's page and in both of its lists of the four lengths. To the digits given the two are one length (9.75 is 9.8 to a tenth). Sellers split the same way: Classic Firearms "9.75"" and AR15Discounts "Length: 9.75 inches"; Midwest Gun Works, Right to Bear and MidwayUSA "Carbine length 9.8"". Nothing says how it is measured; end face to end face along the tube is what the photos are scaled by. Other makers' carbine tubes: BCM "Length: Approximately 9 3/4""; Primary Arms' guide "Gas Tube Length: ~9.75”"; Wing Tactical "A carbine-length gas tube is 9.75 inches long".
Outside diameter0.18 in ± 0.002 in 4.6 mmConfirmedWorked out: {aero-mid-gas-tube.od}
Worked out 0.18 in ± 0.002 in used
{aero-mid-gas-tube.od}, from the site owner
The Army's drawing 8448567 (Gas Tube Assembly), ".1800 DIA REF" at both ends: the head at its rear and the plugged front end. Its sources are in the mid-length tube's ledger.
Aero gives none, and no seller's page does. The tube is the standard's: the carrier key's socket takes a .180 tube (std.ar15.carrier_key_bore_d, .1805), and Wing Tactical says of Aero's four stainless tubes "Made to Mil-Spec dimensions" (https://www.wingtactical.com/firearm-parts-accessories/ar-15-parts/gas-systems/gas-tubes/copy-of-aero-precision-melonite-gas-tubes/, a seller's sentence). The photos don't measure it: at the scale its length gives, the tube reads 0.15 to 0.17 in across by where the edge is taken (6 to 16% thin: a pixel is 0.011 to 0.013 in there, and bright metal and a black tube both lose their edges to a white ground).
How far the tube drops at its bend (its rear run above its front)0.156 in ± 0.01 in 4 mmConfirmedWorked out: {aero-mid-gas-tube.bend_offset}
Worked out 0.156 in ± 0.01 in used
{aero-mid-gas-tube.bend_offset}, from the site owner
The Army's drawing 8448567, ".156" (the rifle's tube): its sources are in the mid-length tube's ledger.
Photo 0.16 in ± 0.006 in
MidwayUSA's picture 924189.jpg: the stainless carbine tube whole and level on white, 880 x 660) and d4a9aa9610b2 (Aero's gallery: the same tube, 1000 x 630, harvested
Scale: its published length between the end faces: 867.1 px = 88.9 px/in and 749.4 px = 76.9 px/in. Read by a level run, a round, a straight slope, a round and a level run fitted to the centre line (each column's upper and lower edge at the 225 and 240 levels): the drop reads 0.1596 and 0.1592 in one and 0.1568 and 0.1616 in the other; the two runs fitted each as its own line stand 0.1625 to 0.1677 apart at the bend's middle, being 0.07 to 0.15 degrees out of parallel
Photo 0.14 in ± 0.02 in
Aero's gallery: the melonite carbine tube, 1000 x 630) and 25748a62f53b (MidwayUSA's 116459.jpg: the same photograph, larger, harvested
Scale: its published length between the end faces: 749.4 px = 76.9 px/in and 873.5 px = 89.6 px/in. Read by the two runs fitted each as its own line stand 0.143 and 0.139 in apart at the bend's middle
The two runs are 0.26 degrees out of parallel in this photograph (the tube's own bow, or how it lies): over the six inches between their middles that is 0.027 in, so where the drop is taken moves it by this ±.
The drawing's, which the receiver's and the block's holes go by; this tube's photos read 0.16 and 0.14, either side of it.
The standard's: it takes the tube from the receiver's hole down to the block's (std.ar15.gas_tube_above_bore), whatever the length of the gas system.
The radius of each of the bend's two rounds, at the tube's centre line3.6 in ± 0.4 in 91.4 mmConflictPhoto: MidwayUSA's picture 924189.jpg: the stainless carbine tube whole and level on white, 880 x 660) and d4a9aa9610b2 (Aero's gallery: the same tube, 1000 x 630
Standard “1.50 ±.50 R 2 PLACES”
US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the side view (the rifle's tube); user-supplied scan (Distribution Statement F, Colt proprietary notice), from the site owner
Photo 3.6 in ± 0.4 in used
MidwayUSA's picture 924189.jpg: the stainless carbine tube whole and level on white, 880 x 660) and d4a9aa9610b2 (Aero's gallery: the same tube, 1000 x 630, harvested
Scale: its published length between the end faces: 88.9 and 76.9 px/in. Read by a level run, a round, a straight slope, an equal round and a level run fitted to the centre line with the radius left free: 3.70 and 3.61 in the first photo (edges at the 225 and 240 levels; formal ± 0.15), 3.64 and 3.39 in the second (± 0.3), the slope between them 6.3 to 6.4 degrees and 1.0 in long
With the radius held at the drawing's 1.50 the fit is a quarter worse (1.3 to 1.4 thousandths rms against 1.1 in the first photo, a tenth of a pixel either way) and puts the bend from 3.80 to 5.44.
This tube's own picture, where the drawing is the rifle tube's; the fit with the radius free is the better one in both photos at every edge level. The bend's two ends below are read with it.
tdp and photo differ by 2.1 in beyond what each states it is good to.
The Army's drawing is of the rifle's tube; where and how a carbine tube bends is on no drawing on file, so this tube's own photo is the reading. The two differ by less than 0.004 in anywhere along the centre line.
Where the bend begins, from the tube's rear (receiver) end3.71 in ± 0.03 in 94.2 mmProvisionalPhoto: MidwayUSA's picture 924189.jpg: the stainless carbine tube whole and level on white, 880 x 660) and d4a9aa9610b2 (Aero's gallery: the same tube, 1000 x 630
Photo 3.71 in ± 0.03 in used
MidwayUSA's picture 924189.jpg: the stainless carbine tube whole and level on white, 880 x 660) and d4a9aa9610b2 (Aero's gallery: the same tube, 1000 x 630, harvested
Scale: its published length between the end faces: 88.9 and 76.9 px/in. Read by where the first round leaves the rear run in the fit of bend_radius (radius free): 3.700 and 3.715 in the first photo, 3.715 and 3.714 in the second; the plain end is the rear, the end with the cross hole the front
The rifle's tube bends at 4.16 ±.25 (8448567), the mid-length's photo read 3.86 by eye. The melonite photograph's fit: 3.74 to 3.76.
Where the bend ends, from the tube's rear (receiver) end5.53 in ± 0.03 in 140.5 mmProvisionalPhoto: MidwayUSA's picture 924189.jpg: the stainless carbine tube whole and level on white, 880 x 660) and d4a9aa9610b2 (Aero's gallery: the same tube, 1000 x 630
Photo 5.53 in ± 0.03 in used
MidwayUSA's picture 924189.jpg: the stainless carbine tube whole and level on white, 880 x 660) and d4a9aa9610b2 (Aero's gallery: the same tube, 1000 x 630, harvested
Scale: its published length between the end faces: 88.9 and 76.9 px/in. Read by where the second round joins the front run in the fit of bend_radius (radius free): 5.533 and 5.531 in the first photo, 5.530 and 5.542 in the second
The melonite photograph's fit: 5.55 to 5.57. The centre line is halfway down the drop 4.63 to 4.66 in from the rear end.
The gas hole's centre behind the tube's front end0.605 in ± 0.004 in 15.4 mmConfirmedWorked out: {std.ar15.gas_tube_hole_from_front}
Worked out 0.605 in ± 0.004 in used
{std.ar15.gas_tube_hole_from_front}, from the site owner
The Army's drawing 8448567, ".605 REF".
Photo 0.607 in ± 0.015 in
Aero's gallery: the melonite carbine tube, 1000 x 630), 25748a62f53b (MidwayUSA's larger copy of it) and d4a9aa9610b2 (Aero's stainless tube, harvested
Scale: its published length between the end faces: 76.9, 89.6 and 76.9 px/in. Read by the hole shows as a notch in one edge of the silhouette (the tube thinner there and its middle moved to the other edge): the notch's middle 0.607, 0.60 and 0.615 in from the end face nearest it
The notch is in the edge away from the rear run's side: the hole faces the barrel, as the drawing has it.
The drawing; this tube's photos put its hole there within a pixel.
Where this tube touches the block: its hole over the block's port. The part's frame is here.
The gas hole's diameter0.125 in ± 0.003 in 3.2 mmConfirmedStandard: US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the view from below and Section A-A (".125 DIA REF", ".100 MAX" deep); user-supplied scan (Distribution Statement F, Colt proprietary notice)
Standard “.125 DIA +.003 THRU THIS SIDE ONLY TO DEPTH SHOWN” used
US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the view from below and Section A-A (".125 DIA REF", ".100 MAX" deep); user-supplied scan (Distribution Statement F, Colt proprietary notice), from the site owner
The notch it makes in the photos' silhouette is 0.07 to 0.10 in long: a chord of it.
The roll pin's hole behind the tube's front end0.187 in ± 0.003 in 4.7 mmConfirmedStandard: US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the side view; user-supplied scan (Distribution Statement F, Colt proprietary notice)
Standard “.187 ±.003” used
US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the side view; user-supplied scan (Distribution Statement F, Colt proprietary notice), from the site owner
Photo 0.19 in ± 0.013 in
Aero's gallery: the melonite carbine tube, 1000 x 630) and 25748a62f53b (MidwayUSA's larger copy of it, harvested
Scale: its published length between the end faces: 76.9 and 89.6 px/in. Read by the white ground seen through the cross hole, a spot 4 and 7 px across on the black tube's middle: its centre 0.194 and 0.189 in from the front end face
Seen straight through from the side: the pin lies across the rifle, square to the plane of the bend, as the drawing has it.
The drawing; the photo agrees within a pixel.
The roll pin's hole, diameter0.078 in ± 0.003 in 2 mmConfirmedStandard: US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the side view; user-supplied scan (Distribution Statement F, Colt proprietary notice)
Standard “.078 DIA +.003 THRU” used
US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the side view; user-supplied scan (Distribution Statement F, Colt proprietary notice), from the site owner
Stated + .003 only. In the photo the hole is 0.05 to 0.08 in across (4 and 7 px).
The front groove round the plugged end, its middle from the front end0.08 in ± 0.015 in 2 mmProvisionalPhoto: Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it), 4e863297f463 (MidwayUSA's stainless tube) and d4a9aa9610b2 (Aero's stainless tube
Photo 0.08 in ± 0.015 in used
Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it), 4e863297f463 (MidwayUSA's stainless tube) and d4a9aa9610b2 (Aero's stainless tube, harvested
Scale: its published length between the end faces: 76.9, 89.6, 88.9 and 76.9 px/in. Read by where the tube reads thinnest, column by column, near its front end: 0.083, 0.057 to 0.068, 0.077 to 0.088 and 0.092 in from the end face
The tube is closed at the front by a plug (the Army's note 1: "MAKE FROM GAS TUBE AND PLUG ASSEMBLY - 8448568"), held by two grooves pressed round it, one each side of the pin's hole: the drawing shows them and gives them no figure.
The rear groove round the plugged end, its middle from the front end0.295 in ± 0.012 in 7.5 mmProvisionalPhoto: Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it), 4e863297f463 (MidwayUSA's stainless tube) and d4a9aa9610b2 (Aero's stainless tube
Photo 0.295 in ± 0.012 in used
Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it), 4e863297f463 (MidwayUSA's stainless tube) and d4a9aa9610b2 (Aero's stainless tube, harvested
Scale: its published length between the end faces: 76.9, 89.6, 88.9 and 76.9 px/in. Read by where the tube reads thinnest behind the pin's hole: 0.291, 0.280, 0.302 and 0.301 to 0.314 in from the end face
A groove's width along the tube0.035 in ± 0.015 in 0.9 mmProvisionalPhoto: Aero's melonite tube) and 25748a62f53b (MidwayUSA's larger copy of it
Photo 0.035 in ± 0.015 in used
Aero's melonite tube) and 25748a62f53b (MidwayUSA's larger copy of it, harvested
Scale: its published length between the end faces: 76.9 and 89.6 px/in. Read by the columns over which the tube reads thinner than beside the groove: three columns of 0.013 in and three to four of 0.011 in, at each groove
Two to four pixels: a groove this narrow is as wide as the photo's blur.
A groove's depth, as the diameter it takes off0.011 in ± 0.004 in 0.3 mmProvisionalPhoto: Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it) and 4e863297f463 (MidwayUSA's stainless tube
Photo 0.011 in ± 0.004 in used
Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it) and 4e863297f463 (MidwayUSA's stainless tube, harvested
Scale: its published length between the end faces: 76.9, 89.6 and 88.9 px/in. Read by how much thinner the tube reads at a groove's middle than on the ring beside it: 0.9 to 1.1, 0.6 to 0.7 and 0.6 to 1.2 px
Read where the groove meets the silhouette's two edges, so it is a groove and not a band. A pixel's blur fills a groove this narrow: it is at least this deep.
The head at the tube's rear end, its length0.1 in ± 0.02 in 2.5 mmProvisionalPhoto: MidwayUSA's copy of Aero's melonite photograph), 0b1df4671af0 (Aero's own), 4e863297f463 (MidwayUSA's stainless tube) and d4a9aa9610b2 (Aero's stainless tube
Photo 0.1 in ± 0.02 in used
MidwayUSA's copy of Aero's melonite photograph), 0b1df4671af0 (Aero's own), 4e863297f463 (MidwayUSA's stainless tube) and d4a9aa9610b2 (Aero's stainless tube, harvested
Scale: its published length between the end faces: 89.6, 76.9, 88.9 and 76.9 px/in. Read by the columns from the rear end face over which the tube reads as thick as its body before it thins: 0.08 to 0.09, 0.11, 0.09 and 0.10 in
The head reads as thick as the tube ahead of the relief (within half a pixel either way in the four photos): it is drawn at the tube's diameter.
The end that enters the carrier key. The drawing shows the head (its ".1800 DIA REF" is taken across it) and gives its length no figure.
The broken rim of each end face, along the tube and across it0.015 in ± 0.01 in 0.4 mmProvisionalPhoto: Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it) and 4e863297f463 (MidwayUSA's stainless tube
Photo 0.015 in ± 0.01 in used
Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it) and 4e863297f463 (MidwayUSA's stainless tube, harvested
Scale: its published length between the end faces: 76.9, 89.6 and 88.9 px/in. Read by how much thinner the tube reads in the first column from each end face than two columns in: 0.7 to 1.5 px at the front and 0.6 to 0.9 px at the rear a side, within 0.014 in of the face; and Wing Tactical's view of a front end (acec2a7c502e) shows a flat face inside a broken rim
A pixel: as large as the picture's blur. Drawn as a chamfer this size at both ends.
Both end faces have their rims broken, the rear one's (the head's, which enters the carrier key) the more; the Army's drawing shows both rounded and sizes neither.
Where the thinner stretch behind the head ends, from the tube's rear end2.27 in ± 0.03 in 57.7 mmProvisionalPhoto: Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it), 4e863297f463 (MidwayUSA's stainless tube) and d4a9aa9610b2 (Aero's stainless tube
Photo 2.27 in ± 0.03 in used
Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it), 4e863297f463 (MidwayUSA's stainless tube) and d4a9aa9610b2 (Aero's stainless tube, harvested
Scale: its published length between the end faces: 76.9, 89.6, 88.9 and 76.9 px/in. Read by the tube's thickness by tenths of an inch from the rear end steps up between the stations at 2.2 and 2.3 in in three of the photos and between 2.1 and 2.4 in the fourth; in Midwest Gun Works' enlargement of the fourth (de71b2b39a4d, 140 px/in) between 2.28 and 2.30
Between its head and this station the tube is thinner than ahead of it: a line across the tube in every photo, with a different sheen behind it.
How much thinner the stretch behind the head is than the tube ahead of it, on the diameter0.013 in ± 0.004 in 0.3 mmProvisionalPhoto: Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it), 4e863297f463 (MidwayUSA's stainless tube) and d4a9aa9610b2 (Aero's stainless tube
Photo 0.013 in ± 0.004 in used
Aero's melonite tube), 25748a62f53b (MidwayUSA's larger copy of it), 4e863297f463 (MidwayUSA's stainless tube) and d4a9aa9610b2 (Aero's stainless tube, harvested
Scale: its published length between the end faces: 76.9, 89.6, 88.9 and 76.9 px/in. Read by the median thickness over 0.5 to 2.0 in from the rear end against that over 2.5 to 4.0 in: 0.9, 1.25, 1.0 and 1.35 px less, which is 0.012, 0.014, 0.011 and 0.018 in
A difference of about one pixel, the same way in four photos of two finishes. Which of the two stretches is the drawing's .180 isn't read (the photos give no diameter): the head and the tube ahead of the relief are drawn at it, and the relief this much under.
The plug in the front end, its length from the front end face0.44 in ± 0.03 in 11.2 mmConfirmedStandard: US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the view from below, scaled between its own .187 (the pin's hole from the end: 0.415) and .605 (the gas hole from the end: 0.46), which differ by a tenth on the scan; user-supplied scan (Distribution Statement F, Colt proprietary notice)
Standard 0.44 in ± 0.03 in used
US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the view from below, scaled between its own .187 (the pin's hole from the end: 0.415) and .605 (the gas hole from the end: 0.46), which differ by a tenth on the scan; user-supplied scan (Distribution Statement F, Colt proprietary notice), from the site owner
It ends ahead of the gas hole's front edge (0.54 from the end), as it must.
Where the tube's bore ends. Not a callout: the plug's own drawing (8448568) isn't in the package.
The tube's bore0.134 in ± 0.006 in 3.4 mmConflictWorked out: The bore of a plain tube of this length (9.75 in) and diameter (.180) that weighs Aero's 0.5 oz as stainless steel at std.density.stainless_416 (127 g to the cubic inch): 14.17 g is 0.1116 cubic inches, a wall of 0.01145 square inches, which leaves a bore of 0.1335. By the weight's half digit (0.45 to 0.55 oz): 0.139 to 0.128. The plug, the relief and the holes are left out of it.
Worked out 0.134 in ± 0.006 in used
The bore of a plain tube of this length (9.75 in) and diameter (.180) that weighs Aero's 0.5 oz as stainless steel at std.density.stainless_416 (127 g to the cubic inch): 14.17 g is 0.1116 cubic inches, a wall of 0.01145 square inches, which leaves a bore of 0.1335. By the weight's half digit (0.45 to 0.55 oz): 0.139 to 0.128. The plug, the relief and the holes are left out of it., harvested
Aero names no grade of stainless; a seller says of gas tubes in general "Most AR-15 gas tubes are made from 304 stainless steel" (Wing Tactical, https://www.wingtactical.com/gas-tubes/), which is 3% denser and would make the bore 0.135.
Standard 0.091 in ± 0.008 in
US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: Section A-A, scale 10/1, scaled (the bore's circle is 0.503 of the tube's across, 180 px of 357 on the page's image: 0.503 of .180); user-supplied scan (Distribution Statement F, Colt proprietary notice), from the site owner
Not a callout, and the section is a sketch: its .125 hole reads .117 and its .100 depth .096 against the same .180. A tube with this bore would weigh 0.8 oz at this length; Aero says 0.5.
This product's own figure, where the section is the Army's tube drawn without a dimension. It shows only at the tube's open rear end, inside the receiver.
weight and tdp-section differ by 0.043 in beyond what each states it is good to.
No page and no callout gives it. Two readings that don't agree: what Aero's weight leaves of a .180 tube, and the Army's section as drawn.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Gas tube
- Gas blocks
- Aero Precision .750 low profile gas block, BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers, BCM Low Profile Gas Block (steel with set screws) 625, BCM Low Profile Gas Block (steel with set screws) 750, SLR Rifleworks Sentry 7 Set Screw Adjustable Gas Block, Superlative Arms .750" Adjustable Gas Block, Bleed Off - Set Screw
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Aero Precision $19.00 Stainless Steel Nov 21, 2026, stock not said
- Aero Precision $20.00 Melonite Nov 21, 2026, stock not said
- AR15Discounts $12.95 Stainless Steel Nov 21, 2026, out of stock that day
- Midwest Gun Works $16.99 Stainless Steel Nov 21, 2026, out of stock that day
- MidwayUSA $16.99 Stainless Steel Oct 30, 2026, out of stock that day
- MidwayUSA $17.99 Melonite Oct 30, 2026, out of stock that day
- Right To Bear $19.00 Stainless Steel Nov 21, 2026, out of stock that day