Gas block
BCM Low Profile Gas Block (steel with set screws) 625
Bravo Company's low-profile gas block for a .625 in journal, the journal of a pencil-profile barrel: steel, phosphate finish, its bore honed after finishing, held by two 10-32 x 3/16 knurled cup point set screws. The gas tube's roll pin isn't included.

- Weight
- 1.93 oz ± 0.12 oz Conflictworked out: (0.785398163 * ({.section_equivalent_d} * {.section_equivalent_d} - {.journal_id} * {.journal_id}) * {.length} - 0.785398163 * {.tube_hole_d} * {.tube_hole_d} * ({.length} - {.pin_hole_from_front} + {.tube_hole_past_pin})) * {std.density.steel}Its sources span 1.81 oz to 2.94 oz.
- Lowest price
- $44.95 at BCM, read Nov 21, 2026
- Maker's number
- BCM-LGB-625
- Colour
- Phosphate, black
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Aero M4E1 Enhanced, pencil barrel”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Bore (the journal it fits: .750 or .625)0.625 in ± 0.001 in 15.9 mmConfirmedPublished: Bravo Company USA, BCM® Low Profile Gas Block (steel with set screws) 625 (BCM-LGB-625), Description, the maker, read Oct 12, 2026
Published “Machined of steel, phosphate finish, for .625 barrels.” used
Bravo Company USA, BCM® Low Profile Gas Block (steel with set screws) 625 (BCM-LGB-625), Description, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Gas Seat Diameter .625”
Primary Arms, Bravo Company Manufacturing Low Profile AR-15 Gas Block - Set Screw - .625" (BCM-LGB-625), Specifications; its Features: ".625" gas seat diameter"; its Details: "This version is sized for a .625" gas block journal.", a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's sentence; the seller's table says the same.
BCM: "Barrel ID honed after finish per USGI TDP." The .750 block is another product (BCM-LGB-750).
Height, the tube's boss's top to the set screws' flat1.34 in ± 0.005 in 34 mmCorroboratedPublished: AR15.BUILD (a parts database, not a seller), Bravo Company AR-15/M16 .625 inch Low-Profile Gas Block (MPN BCM-LGB-625), SPECS, a page, read Oct 12, 2026
Published “Dimensions: 1.34" high, 1" long” used
AR15.BUILD (a parts database, not a seller), Bravo Company AR-15/M16 .625 inch Low-Profile Gas Block (MPN BCM-LGB-625), SPECS, a page, read Oct 12, 2026 the page, harvested Oct 12, 2026
No source is named for the figure, and what the height spans isn't said.
Photo 1.33 in ± 0.035 in
Primary Arms BCM-LGB-625_00.jpg: an oblique view of the star face, 2200 x 1466, harvested
Scale: the bore's mouth along the face's axis, 345.1 px, as journal_id (.625): 552.2 px/in. Read by by the bore's mouth alone: the mouth is a circle in the face's plane, so along any line in that plane a length is its length in the photo over the mouth's chord along the same line, times .625. On the face's axis (the mouth's centre to the boss's top) the boss's top is 431.9 px above the centre and the flat 301.6 below it where the mouth's chord is 345.1 px: 0.783 and 0.547 in. The ± covers the picked top (± 4 px), the mouth's rim (found on 48 rays, a conic fitted, rms 2.3 px: its edge break is in it) and the perspective left in
Worked out 1.34 in ± 0.005 in
{bcm-750-gas-block.height}, harvested
The .750 block's height, two sellers' figure for that number (data/ledger/bcm-750-gas-block.yaml). Not carried over on its name: this block's own photos show the same outside (the note above).
The one page that states it for this number; the block's own photo by its bore reads it within its ±, and the .750 block of the same outside has it from two sellers.
BCM gives none. One page states it for this number, a parts database that names no source; the block's own photo, scaled by its own bore's mouth as the .625 it is honed to, reads it within a hundredth; and it is the .750 block's height (two sellers'), whose outside this block has: by its own photos the boss's top is as far above the bore and the flat as far below it as the .750's within 0.01 in, the flat as wide (0.295 against 0.297), the star at the same height and size, the block as long and its roll pin's hole in the same place.
Length along the barrel1.011 in ± 0.012 in 25.7 mmCorroboratedPhoto: Primary Arms BCM-LGB-625_03.jpg: the block's right side straight on, the star face at the right, 2200 x 1467
Published “Dimensions: 1.34" high, 1" long”
AR15.BUILD (a parts database, not a seller), Bravo Company AR-15/M16 .625 inch Low-Profile Gas Block (MPN BCM-LGB-625), SPECS, a page, read Oct 12, 2026 the page, harvested Oct 12, 2026
A whole inch beside a height to the hundredth: its ± is half its last digit.
Photo 1.011 in ± 0.012 in used
Primary Arms BCM-LGB-625_03.jpg: the block's right side straight on, the star face at the right, 2200 x 1467, harvested
Scale: its height on the line across its middle, 964.4 px (the top edge at row 242.3 and the bottom at 1206.7 at column 1000, the silhouette at grey 235), as height (1.34): 719.7 px/in. Read by the block's width in the boss's rows, clear of the ring's (the front edge bulges there by the end face's rim, 8 px): 729.3 px over rows 270 to 480, 1.013 in; the other side's photo (ac5f36084b6e, BCM-LGB-625_02: 766.9 px where its height is 1019.7) gives 1.008, and this is their mean. The ± covers the scale (the height's), the edges and the lens's distance (the boss's sides stand 0.14 in nearer than the top and bottom edges)
The database's figure is a whole inch; the side photo at the height's scale gives the hundredths, and agrees with it.
BCM gives none. A database's figure is to the inch; the side photo, at the height's scale, gives the hundredths. Faxon, of the journal this block is for: "use a block 1″ long or shorter" on its 1.1 in journal. The .750 block reads 1.008 the same way.
Top above the bore axis0.789 in ± 0.03 in 20 mmProvisionalPhoto: Primary Arms BCM-LGB-625_00.jpg, 453104958d81, an oblique view of the star face, turned square by the block's own bore: the mouth round, the face's axis upright: derived-694b5d90ca1f.manifest.json, 1200 x 1600
Photo 0.789 in ± 0.03 in used
Primary Arms BCM-LGB-625_00.jpg, 453104958d81, an oblique view of the star face, turned square by the block's own bore: the mouth round, the face's axis upright: derived-694b5d90ca1f.manifest.json, 1200 x 1600, harvested
Scale: the face's height on its own axis, 1072 px (the boss's top at row 288.6 to the tab's flat at 1360.6), as height (1.34): 800 px/in. Read by the boss's top above the mouth's centre: 431.9 px of the 733.5 between the boss's top and the flat on the face's axis in the photo (row 288.6 above row 920 in the turned picture). The ± covers the picked top (± 4 px), where the bore's centre is taken to be (the mouth's, as a conic fitted to its rim) and the perspective left in
Not published. The boss's top above the bore's centre on the star face turned square by the bore's own mouth, at the height's scale. By the bore alone (.625) it reads 0.783; the .750 block's is 0.785.
The set screws' flat below the bore axis0.551 in ± 0.03 in 14 mmProvisionalPhoto: Primary Arms BCM-LGB-625_00.jpg, 453104958d81, an oblique view of the star face, turned square by the block's own bore: the mouth round, the face's axis upright: derived-694b5d90ca1f.manifest.json, 1200 x 1600
Photo 0.551 in ± 0.03 in used
Primary Arms BCM-LGB-625_00.jpg, 453104958d81, an oblique view of the star face, turned square by the block's own bore: the mouth round, the face's axis upright: derived-694b5d90ca1f.manifest.json, 1200 x 1600, harvested
Scale: the face's height on its own axis, 1072 px (the boss's top at row 288.6 to the tab's flat at 1360.6), as height (1.34): 800 px/in. Read by the tab's flat below the mouth's centre where the face's axis meets it: 301.6 px of the 733.5 (row 1360.6 under row 920 in the turned picture). The flat is the silhouette's lower edge against the white ground; it lies 1.7° from square to the axis in the turned picture, which is the perspective left in
By the bore alone (.625) it reads 0.547; the .750 block's is 0.555.
Outside diameter of its ring about the barrel0.854 in ± 0.025 in 21.7 mmProvisionalPhoto: Primary Arms BCM-LGB-625_00.jpg (453104958d81), the star face turned square by the block's own bore (the mouth round, the face's axis upright): derived-694b5d90ca1f.manifest.json, 1200 x 1600
Photo 0.854 in ± 0.025 in used
Primary Arms BCM-LGB-625_00.jpg (453104958d81), the star face turned square by the block's own bore (the mouth round, the face's axis upright): derived-694b5d90ca1f.manifest.json, 1200 x 1600, harvested
Scale: frame from the reviewed holes top, flat (800.0 px/in, rms 0.000 in over 2 points). Read by width in y [-0.2, 0.2] of the traced outline (tools/trace.py); across the ring at the bore's height; the ± covers the edge (the left side read against the white ground to a pixel or two, the right side its mirror: the face's own right edge reads 0.009 in further out at this height), the scale and the perspective left in the turned picture (its flat lies 1.7° off level)
Not published. Across the ring at the bore's height in the star face turned square by the bore. The .750 block's reads 0.88 ± 0.025 by its own photo: this one's ring is 0.03 narrower by its own, inside the two readings' ±, and whether the ring really is thinner on the .625 block isn't settled by them. The outline's left side is the face's edge against the white ground; its right side is that edge mirrored about the axis, and the face's own right edge, read at the bore's height where the block's side stands behind it, is 0.009 in further out.
Width of the gas tube's boss on top0.264 in ± 0.02 in 6.7 mmProvisionalPhoto: Primary Arms BCM-LGB-625_00.jpg (453104958d81), the star face turned square by the block's own bore (the mouth round, the face's axis upright): derived-694b5d90ca1f.manifest.json, 1200 x 1600
Photo 0.264 in ± 0.02 in used
Primary Arms BCM-LGB-625_00.jpg (453104958d81), the star face turned square by the block's own bore (the mouth round, the face's axis upright): derived-694b5d90ca1f.manifest.json, 1200 x 1600, harvested
Scale: frame from the reviewed holes top, flat (800.0 px/in, rms 0.000 in over 2 points). Read by median row width in y [0.52, 0.66] (0.251–0.299) of the traced outline (tools/trace.py); the boss's neck, its sides closest
Not published. Across the boss's neck, where its sides are closest, in the star face turned square. The .750 block's is 0.288.
Its section's area, as the diameter of the disc that has it0.976 in ± 0.015 in 24.8 mmProvisionalPhoto: Primary Arms BCM-LGB-625_00.jpg, 453104958d81, an oblique view of the star face, turned square by the block's own bore: the mouth round, the face's axis upright: derived-694b5d90ca1f.manifest.json, 1200 x 1600
Photo 0.976 in ± 0.015 in used
Primary Arms BCM-LGB-625_00.jpg, 453104958d81, an oblique view of the star face, turned square by the block's own bore: the mouth round, the face's axis upright: derived-694b5d90ca1f.manifest.json, 1200 x 1600, harvested
Scale: the face's height on its own axis, 1072 px (the boss's top at row 288.6 to the tab's flat at 1360.6), as height (1.34): 800 px/in. Read by the area inside the outline's 78 points in the turned picture, 478,400 px² (0.7475 in² at 800 px/in), as 2 √(area / π). The ± is the outline's ± 0.012 in round its 3.5 in
For the weight: the area inside its traced outline (profiles.front, the star face turned square by the bore, its right side the left's mirror) is 0.7475 square inches, the bore not taken out; a disc of that area is this far across. The .750 block's outline holds 0.7726 the same way.
The roll pin's cross hole behind the front (star) face0.317 in ± 0.008 in 8.1 mmProvisionalPhoto: Primary Arms BCM-LGB-625_03.jpg: the block's right side straight on, the star face at the right, 2200 x 1467
Photo 0.317 in ± 0.008 in used
Primary Arms BCM-LGB-625_03.jpg: the block's right side straight on, the star face at the right, 2200 x 1467, harvested
Scale: its height on the line across its middle, 964.4 px (the top edge at row 242.3 and the bottom at 1206.7 at column 1000, the silhouette at grey 235), as height (1.34): 719.7 px/in. Read by the hole's centre (column 1226.8: its rim's two sides on row 364, columns 1199.0 and 1254.5) to the front face's edge in the boss's rows (column 1454.7): 227.9 px
The star is on the face nearer the pin (the oblique photo), and the tube's pin is at the tube's front end: the star face is the muzzle end. The .750 block's is 0.315.
The roll pin's cross hole, diameter0.078 in ± 0.003 in 2 mmConfirmedWorked out: {bcm-750-gas-block.pin_hole_d}
Worked out 0.078 in ± 0.003 in used
{bcm-750-gas-block.pin_hole_d}, from the site owner
The Army's front sight's hole for the gas tube's pin (8448566: ".078 DIA +.003 THRU"), as read for the .750 block's ledger, where the drawing and its page are cited: the block takes the same tube and pin (BCM: "for AR15, M16, M4, M4A1").
Photo 0.077 in ± 0.006 in
Primary Arms BCM-LGB-625_03.jpg: the block's right side straight on, the star face at the right, 2200 x 1467, harvested
Scale: its height on the line across its middle, 964.4 px (the top edge at row 242.3 and the bottom at 1206.7 at column 1000, the silhouette at grey 235), as height (1.34): 719.7 px/in. Read by the hole's rim along the block, row 364: columns 1199.0 to 1254.5, 55.5 px. Up the block it shows 49 px (rows 339.5 to 388.5): the lens looks a little down through it (the ground shows through its upper part only)
The pin it takes is the Army's; the photo's hole is that size within its ±.
The gas tube's pin hole to its gas hole0.418 in ± 0.002 in 10.6 mmConfirmedWorked out: {bcm-750-gas-block.pin_to_port}
Worked out 0.418 in ± 0.002 in used
{bcm-750-gas-block.pin_to_port}, from the site owner
The Army's gas tube (8448567: ".418 ±.002"), as read for the .750 block's ledger, where the drawing and its page are cited.
Its gas port ahead of its rear face0.276 in ± 0.02 in 7 mmProvisionalWorked out: {.length} - {.pin_hole_from_front} - {.pin_to_port}
Worked out 0.276 in ± 0.02 in used
{.length} - {.pin_hole_from_front} - {.pin_to_port}, harvested
Not published. Where the standard tube's gas hole lands when its pin is in the block's cross hole: the block's length less the pin's place behind the front face less the tube's pin-to-port. The Army's own sight has its port .270 from its rear face (8448566); the .750 block comes to 0.275.
The gas tube's hole, its axis above the bore (at the block)0.625 in ± 0.003 in 15.9 mmConfirmedWorked out: {bcm-750-gas-block.tube_hole_above_bore}
Worked out 0.625 in ± 0.003 in used
{bcm-750-gas-block.tube_hole_above_bore}, from the site owner
The Army's front sight (8448566: ".625 ±.003", the gas tube's hole above the barrel's hole), as read for the .750 block's ledger: the block takes the Army's tube.
Photo 0.618 in ± 0.035 in
Primary Arms BCM-LGB-625_03.jpg: the block's right side straight on, the star face at the right, 2200 x 1467, harvested
Scale: its height on the line across its middle, 964.4 px (the top edge at row 242.3 and the bottom at 1206.7 at column 1000, the silhouette at grey 235), as height (1.34): 719.7 px/in. Read by the roll pin's hole (the pin crosses the tube's hole), its centre (row 364.0) 123.1 px below the top edge there (row 240.9): 0.171 in below the boss's top, which is height_above_bore (0.789 ± 0.03) above the bore
The block takes the Army's tube; the pin's hole in the photo is at that height within the ±.
The gas tube's hole, diameter0.18 in ± 0.001 in 4.6 mmConfirmedWorked out: {bcm-750-gas-block.tube_hole_d}
Worked out 0.1805 in ± 0.001 in used
{bcm-750-gas-block.tube_hole_d}, from the site owner
8448566: ".1805 DIA +.0010", as read for the .750 block's ledger.
Not published, and no photo on file shows the rear face. The Army's sight's hole for the same .180 tube.
How far the gas tube's hole runs on ahead of the pin's hole0.217 in ± 0.015 in 5.5 mmConfirmedWorked out: {bcm-750-gas-block.tube_hole_past_pin}
Worked out 0.217 in ± 0.015 in used
{bcm-750-gas-block.tube_hole_past_pin}, from the site owner
The Army's sight: the tube's hole .905 deep, the pin .688 from the same face (8448566), as read for the .750 block's ledger.
Not published. The star face is closed (the oblique photo); the hole enters from the rear as on the .750 block (BCM's photo of that block's rear face).
The star on the front face, its centre above the bore axis0.553 in ± 0.015 in 14 mmProvisionalPhoto: Primary Arms BCM-LGB-625_00.jpg, 453104958d81, an oblique view of the star face, turned square by the block's own bore: the mouth round, the face's axis upright: derived-694b5d90ca1f.manifest.json, 1200 x 1600
Photo 0.553 in ± 0.015 in used
Primary Arms BCM-LGB-625_00.jpg, 453104958d81, an oblique view of the star face, turned square by the block's own bore: the mouth round, the face's axis upright: derived-694b5d90ca1f.manifest.json, 1200 x 1600, harvested
Scale: the face's height on its own axis, 1072 px (the boss's top at row 288.6 to the tab's flat at 1360.6), as height (1.34): 800 px/in. Read by the mean of its five tips in the turned picture ((608, 386), (692, 450), (657, 553), (554, 551), (524, 448): the furthest bright pixel of the mark each way): row 477.6, 442.4 px above the mouth's centre (row 920). Their mean is 7 px to one side of the axis
BCM's star, laser-marked on the boss's front face (all three photos of that face show it). The .750 block's is 0.552 above its bore.
The star on the front face, its centre to a tip0.113 in ± 0.006 in 2.9 mmProvisionalPhoto: Primary Arms BCM-LGB-625_00.jpg, 453104958d81, an oblique view of the star face, turned square by the block's own bore: the mouth round, the face's axis upright: derived-694b5d90ca1f.manifest.json, 1200 x 1600
Photo 0.1125 in ± 0.006 in used
Primary Arms BCM-LGB-625_00.jpg, 453104958d81, an oblique view of the star face, turned square by the block's own bore: the mouth round, the face's axis upright: derived-694b5d90ca1f.manifest.json, 1200 x 1600, harvested
Scale: the face's height on its own axis, 1072 px (the boss's top at row 288.6 to the tab's flat at 1360.6), as height (1.34): 800 px/in. Read by the five tips' mean distance from their own centre, 90.0 px (88.1 to 91.6)
The .750 block's is 0.115.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Gas block journal
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $44.95 Nov 21, 2026, in stock that day
- Primary Arms $44.95 Nov 21, 2026, in stock that day
- KYGUNCO $44.95 Nov 21, 2026, in stock that day
- MidwayUSA $44.95 Oct 30, 2026, in stock that day
- GRITR Sports $38.99 Nov 21, 2026, out of stock that day
- Rifle Supply $50.99 Nov 21, 2026, out of stock that day