Gas block
BCM Low Profile Gas Block (steel with set screws) 750
Bravo Company's low-profile gas block for a .750 in journal: steel, phosphate finish, its bore honed after finishing, held by two 10-32 x 3/16 knurled cup point set screws. The gas tube's roll pin isn't included.

- Weight
- 2.08 oz ± 0.005 oz Provisionalpublished: AR15Discounts, BCMGUNFIGHTER .750 Low Profile Gas Block (BCM-LGB-750), Additional information, a seller, read Oct 5, 2026
- Lowest price
- $44.95 at BCM, read Nov 21, 2026
- Maker's number
- BCM-LGB-750
- Colour
- Phosphate, black
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “BCM 16 in mid-length”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Bore (the journal it fits: .750 or .625)0.75 in ± 0.001 in 19 mmConfirmedPublished: Bravo Company USA, BCM® Low Profile Gas Block (steel with set screws) 750 (BCM-LGB-750), Description, the maker, read Oct 5, 2026
Published “Machined of steel, phosphate finish, for .750 barrels.” used
Bravo Company USA, BCM® Low Profile Gas Block (steel with set screws) 750 (BCM-LGB-750), Description, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Gas Seat Diameter .750”
Primary Arms, Bravo Company Manufacturing Low Profile AR-15 Gas Block - Set Screw - .750" (BCM-LGB-750), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
The maker's sentence; the seller's table says the same.
BCM: "Barrel ID honed after finish per USGI TDP." The .625 block is another product (BCM-LGB-625).
Height, the tube's boss's top to the set screws' flat1.34 in ± 0.005 in 34 mmCorroboratedPublished: Alexander's, BCM Low-Profile Gas Block .750 – Steel, Black Phosphate (BCM-LGB-750), Key Specifications, a seller, read Oct 5, 2026
Published “Height: 1.34 inches” used
Alexander's, BCM Low-Profile Gas Block .750 – Steel, Black Phosphate (BCM-LGB-750), Key Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Dimensions 1 × 1.34 × 1.34 in”
AR15Discounts, BCMGUNFIGHTER .750 Low Profile Gas Block (BCM-LGB-750), Additional information, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 1.306 in ± 0.035 in
Primary Arms BCM-LGB-750_00.jpg, 3ce1f7e276b9, an oblique view of the star face, turned square: its axis upright, its flat level, the bore's mouth as wide as tall: derived-04a45a69497d.manifest.json, harvested
Scale: the bore's mouth along the face's axis, 612.6 px (484.9 px in the photo, by the ellipse fitted to its rim), as journal_id (.750): 816.8 px/in. Read by the boss's top (row 295.5) to the tab's flat (row 1361.8): 1066.3 px. The ± covers the picked edges (±5 px), the perspective left in (about 3% across the face) and the mouth's edge break
Two sellers' pages state it; the photo by the bore's mouth is within its ± and reads small the way an edge break at the mouth would make it.
BCM gives none. Two sellers state 1.34 (AR15Discounts as two of three figures, so its table isn't the part's width). By the bore's mouth as the .750 it is honed to, the star face reads 2.5% less: the mouth's edge in the photo is the outside of the bore's edge break, so that scale reads small.
Length along the barrel1.008 in ± 0.012 in 25.6 mmCorroboratedPhoto: AR15Discounts BCM-LGB-750_01.jpg: the block's right side straight on, the star face at the right, 2200 x 1467
Published “Length: 1 inch”
Alexander's, BCM Low-Profile Gas Block .750 – Steel, Black Phosphate (BCM-LGB-750), Key Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
A whole inch beside a height to the hundredth: its ± is half its last digit. The same page's "Additional information" has "Length 6.9500", which is not the block's.
Published “Dimensions 1 × 1.34 × 1.34 in”
AR15Discounts, BCMGUNFIGHTER .750 Low Profile Gas Block (BCM-LGB-750), Additional information, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 1.008 in ± 0.012 in used
AR15Discounts BCM-LGB-750_01.jpg: the block's right side straight on, the star face at the right, 2200 x 1467, harvested
Scale: scale from bcm-750-gas-block.height = 1.34 in (y-extent 990 px → 738.8 px/in). Read by median row width in y [-0.33, -0.06] (1.006–1.008) of the traced outline (tools/trace.py); the boss's rows, clear of the ring's (the right edge bulges there by the end face's rim, 8 px); the ± covers the scale (the height's), the edges and the lens's distance (the boss's sides stand 0.14 in nearer than the top and bottom edges)
The sellers' figure is a whole inch; the side photo at the height's scale gives the hundredths, and agrees with it.
BCM gives none. The sellers' figure is to the inch; the side photo, at the height's scale, gives the hundredths.
Top above the bore axis0.785 in ± 0.03 in 19.9 mmProvisionalPhoto: Primary Arms BCM-LGB-750_00.jpg, 3ce1f7e276b9, an oblique view of the star face, turned square: its axis upright, its flat level, the bore's mouth as wide as tall: derived-04a45a69497d.manifest.json
Photo 0.785 in ± 0.03 in used
Primary Arms BCM-LGB-750_00.jpg, 3ce1f7e276b9, an oblique view of the star face, turned square: its axis upright, its flat level, the bore's mouth as wide as tall: derived-04a45a69497d.manifest.json, harvested
Scale: the face's height, 1066.3 px (the boss's top, row 295.5, to the tab's flat, row 1361.8), as height (1.34, two sellers): 795.7 px/in. Read by the boss's top above the mouth's centre (row 920): 624.5 px of the 1066.3. The ± covers the picked edges (±5 px), where the bore's centre is taken to be (the mouth's, as an ellipse fitted to its rim) and the perspective left in (the boss is nearer the lens than the tab)
Not published. The top of the tube's boss above the bore's centre, as the star face shows it, at the sellers' height.
The set screws' flat below the bore axis0.555 in ± 0.03 in 14.1 mmProvisionalPhoto: Primary Arms BCM-LGB-750_00.jpg, 3ce1f7e276b9, an oblique view of the star face, turned square: its axis upright, its flat level, the bore's mouth as wide as tall: derived-04a45a69497d.manifest.json
Photo 0.555 in ± 0.03 in used
Primary Arms BCM-LGB-750_00.jpg, 3ce1f7e276b9, an oblique view of the star face, turned square: its axis upright, its flat level, the bore's mouth as wide as tall: derived-04a45a69497d.manifest.json, harvested
Scale: the face's height, 1066.3 px, as height (1.34, two sellers): 795.7 px/in. Read by the tab's flat (row 1361.8, level within a pixel between its two corners) below the mouth's centre (row 920): 441.8 px of the 1066.3
Outside diameter of its ring about the barrel0.88 in ± 0.025 in 22.4 mmProvisionalPhoto: Primary Arms BCM-LGB-750_00.jpg (3ce1f7e276b9), the star face turned square (its axis upright, its flat level, the bore's mouth as wide as tall): derived-04a45a69497d.manifest.json, 1200 x 1600
Photo 0.88 in ± 0.025 in used
Primary Arms BCM-LGB-750_00.jpg (3ce1f7e276b9), the star face turned square (its axis upright, its flat level, the bore's mouth as wide as tall): derived-04a45a69497d.manifest.json, 1200 x 1600, harvested
Scale: frame from the reviewed holes top, flat (795.7 px/in, rms 0.000 in over 2 points). Read by width in y [-0.2, 0.2] of the traced outline (tools/trace.py); across the ring at the bore's height; the ± covers the picked edges (±5 px a side), the scale and how the face's widths are set against its heights (three gauges within 2%: the mouth's two chords 0.966, the star's proportions 0.971, the block's edges under a camera without perspective 0.949)
Not published. Across the ring at the bore's height in the rectified star face. How the face's widths stand against its heights in that photo has three gauges, within 2% of each other: the bore's mouth (round: its chord along the flat against its chord along the axis, 0.966, the one used), the star (a regular five-pointed star: 0.971) and the block's own edges (the flat, the axis and the long edges mutually perpendicular under a camera without perspective: 0.949, 0.92 to 0.97 between the two long edges). The first rectification, by the mouth's fitted ellipse taken whole, read 3% narrower (0.854) and left the face sheared: along its long axis the edge finder runs inside the rim.
Width of the gas tube's boss on top0.288 in ± 0.02 in 7.3 mmProvisionalPhoto: Primary Arms BCM-LGB-750_00.jpg (3ce1f7e276b9), the star face turned square (its axis upright, its flat level, the bore's mouth as wide as tall): derived-04a45a69497d.manifest.json, 1200 x 1600
Photo 0.288 in ± 0.02 in used
Primary Arms BCM-LGB-750_00.jpg (3ce1f7e276b9), the star face turned square (its axis upright, its flat level, the bore's mouth as wide as tall): derived-04a45a69497d.manifest.json, 1200 x 1600, harvested
Scale: frame from the reviewed holes top, flat (795.7 px/in, rms 0.000 in over 2 points). Read by median row width in y [0.52, 0.66] (0.279–0.313) of the traced outline (tools/trace.py); the boss's neck, its sides closest
Not published. Across the boss's neck, where its sides are closest, in the rectified star face.
The roll pin's cross hole behind the front (star) face0.315 in ± 0.008 in 8 mmProvisionalPhoto: AR15Discounts BCM-LGB-750_01.jpg: the block's right side straight on, the star face at the right, 2200 x 1467
Photo 0.315 in ± 0.008 in used
AR15Discounts BCM-LGB-750_01.jpg: the block's right side straight on, the star face at the right, 2200 x 1467, harvested
Scale: its height, 990 px, as height (1.34, two sellers): 738.8 px/in (the side trace's scale). Read by the hole's centre (column 1236.8, a circle through its outermost edge on 155 rays) to the front face's edge in the boss's rows (column 1469.5): 232.7 px
The star is on the face nearer the pin (both oblique photos), and the tube's pin is at the tube's front end: the star face is the muzzle end.
The roll pin's cross hole, diameter0.078 in ± 0.003 in 2 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145: the hole the gas tube's pin goes through; the tube's own is the same (8448567, PDF page 144)
Standard “.078 DIA +.003 THRU” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145: the hole the gas tube's pin goes through; the tube's own is the same (8448567, PDF page 144), from the site owner
The Army's sight, not this block: the block takes the same tube and pin (BCM: "for AR15, M16, M4, M4A1").
Photo 0.083 in ± 0.005 in
AR15Discounts BCM-LGB-750_01.jpg: the block's right side straight on, 2200 x 1467, harvested
Scale: its height, 990 px, as height (1.34): 738.8 px/in. Read by a circle through the hole's outermost edge (155 rays, 1.3 px spread): 61.4 px, its edge break included
The pin it takes is the Army's; the photo's hole, with its edge break, is 0.005 wider and within its ±.
The gas tube's pin hole to its gas hole0.418 in ± 0.002 in 10.6 mmConfirmedStandard: US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the .078 pin hole to the .125 gas hole; .605 REF from the tube's front end, the pin .187 ±.003 from it
Standard “.418 ±.002” used
US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the .078 pin hole to the .125 gas hole; .605 REF from the tube's front end, the pin .187 ±.003 from it, from the site owner
Its gas port ahead of its rear face0.275 in ± 0.02 in 7 mmProvisionalWorked out: {bcm-750-gas-block.length} - {bcm-750-gas-block.pin_hole_from_front} - {bcm-750-gas-block.pin_to_port}
Worked out 0.275 in ± 0.02 in used
{bcm-750-gas-block.length} - {bcm-750-gas-block.pin_hole_from_front} - {bcm-750-gas-block.pin_to_port}
Standard “.270 ±.002”
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145: the .125 gas port from the sight's rear face (and the pin's hole .688 ±.003 from it: .418 apart), from the site owner
The Army's sight, not this block.
The block's own, by its pin hole in the photo; the Army's sight has the same within the ±.
Not published. Where the standard tube's gas hole lands when its pin is in the block's cross hole: the block's length less the pin's place behind the front face less the tube's pin-to-port. The Army's own sight has its port .270 from its rear face (8448566), the same within the photo's ±.
The gas tube's hole, its axis above the bore (at the block)0.625 in ± 0.003 in 15.9 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145: the gas tube's hole above the barrel's hole
Standard “.625 ±.003” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145: the gas tube's hole above the barrel's hole, from the site owner
The Army's sight. The receiver takes the tube .780 above the bore (8448522) and the tube's bend drops it .156 (8448567): the same height at the block.
Photo 0.606 in ± 0.035 in
AR15Discounts BCM-LGB-750_01.jpg: the block's right side straight on, 2200 x 1467, harvested
Scale: its height, 990 px, as height (1.34): 738.8 px/in. Read by the roll pin's hole (the pin crosses the tube's hole), its centre (row 383.9) 132.1 px below the top edge there (row 251.8): 0.179 in below the boss's top, which is height_above_bore (0.785 ± 0.03) above the bore
The block takes the Army's tube; the pin's hole in the photo is at that height within the ±.
The gas tube's hole, diameter0.18 in ± 0.001 in 4.6 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145: the gas tube's hole, to .905 ±.015 depth
Standard “.1805 DIA +.0010” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145: the gas tube's hole, to .905 ±.015 depth, from the site owner
The Army's sight, not this block.
Not published, and no photo on file is scaled at the rear face. The Army's sight's hole for the same .180 tube.
How far the gas tube's hole runs on ahead of the pin's hole0.217 in ± 0.015 in 5.5 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145: the tube's hole's depth less the pin hole's distance from the same face
Standard “.905 ±.015 DEPTH; .688 ±.003” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145: the tube's hole's depth less the pin hole's distance from the same face, from the site owner
The Army's sight, not this block.
Not published. BCM's rear-face photo (dc4f60fefbd5) shows the hole entering the boss from the rear and the star face closed. The Army's sight: the hole .905 deep, the pin .688 from the same face.
The star on the front face, its centre above the bore axis0.552 in ± 0.015 in 14 mmProvisionalPhoto: Primary Arms BCM-LGB-750_00.jpg, 3ce1f7e276b9, an oblique view of the star face, turned square: its axis upright, its flat level, the bore's mouth as wide as tall: derived-04a45a69497d.manifest.json
Photo 0.552 in ± 0.015 in used
Primary Arms BCM-LGB-750_00.jpg, 3ce1f7e276b9, an oblique view of the star face, turned square: its axis upright, its flat level, the bore's mouth as wide as tall: derived-04a45a69497d.manifest.json, harvested
Scale: the face's height, 1066.3 px, as height (1.34, two sellers): 795.7 px/in. Read by the mean of its five tips ((585.0, 390.0), (676.6, 456.5), (647.0, 556.8), (539.2, 551.8), (503.1, 447.8): picked on the first rectification and carried here): row 480.6, 439.4 px above the mouth's centre (row 920). Their mean is 10 px to one side of the axis, as the boss's neck is
BCM's star, laser-marked on the boss's front face (every photo of that face shows it; the rear face has the tube's hole and no star).
The star on the front face, its centre to a tip0.115 in ± 0.006 in 2.9 mmProvisionalPhoto: Primary Arms BCM-LGB-750_00.jpg, 3ce1f7e276b9, an oblique view of the star face, turned square: its axis upright, its flat level, the bore's mouth as wide as tall: derived-04a45a69497d.manifest.json
Photo 0.115 in ± 0.006 in used
Primary Arms BCM-LGB-750_00.jpg, 3ce1f7e276b9, an oblique view of the star face, turned square: its axis upright, its flat level, the bore's mouth as wide as tall: derived-04a45a69497d.manifest.json, harvested
Scale: the face's height, 1066.3 px, as height (1.34, two sellers): 795.7 px/in. Read by the five tips' mean distance from their own centre, 91.2 px (87.6 to 95.1). Tip to tip across it is 1.058 of its height from the top tip to the lower two, where a regular star is 1.052
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Gas block journal
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $44.95 Nov 21, 2026, in stock that day
- Primary Arms $44.95 Nov 21, 2026, in stock that day
- AR15Discounts $44.95 Nov 21, 2026, in stock that day
- Alexander's Store $44.95 Nov 18, 2026, in stock that day
- Sportsman's Warehouse $32.92 Nov 21, 2026, out of stock that day