Barrel
Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16"
Geissele's 16 in cold-hammer-forged 5.56 barrel, stripped, in its taper profile: chrome lined, 1:7 twist, manganese phosphate, a mid-length gas port (.078) on a .750 in journal behind a collar with a dimple opposite the port, an M4 feed ramp extension, a 1/2 x 28 muzzle thread. Sellers' pages: "This cold hammer-forged 16\" barrel features a Geissele Taper Profile and mid-length gas system" (Primary Arms); its length is stated as 16 (Primary Arms) and as 16.25 (AR15Discounts' list), and the ledger keeps both. Its steel is stated two ways: "Chrome moly vanadium steel" (Primary Arms' features; AR15Discounts: "Material Chrome Moly Vanadium Steel") and "Barrel Material 4140 Chrome Moly Steel" (Primary Arms' table).

- Weight
- 27.2 oz ± 0.8 oz Corroboratedpublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 16" (05-2984), Specifications; its Features: "1.7 lbs weight", a seller, read Oct 28, 2026
- Lowest price
- $365.00 at Primary Arms, read Nov 21, 2026, out of stock that day
- Made for
- Chambered in 5.56 NATO
- Maker's number
- 05-2984
- Colour
- Geissele manganese phosphate (barrels)
- Drawn as
- modelled
- Maker's page
- primaryarms.com
In “Two-tone 16 in, Stealth Gray and soft-shooting”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The gas block journal's diameter0.75 in ± 0.0005 in 19 mmCorroboratedPublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 16" (05-2984), Specifications, a seller, read Oct 28, 2026
Published “Gas Seat Diameter .750” used
Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 16" (05-2984), Specifications, a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Gas Block Diameter: .750”
AR15Discounts, Geissele Automatics 16.25" CHF Government Phosphate 1:7 Midlengtrh Barrel - 05-2984, Specifications; its Additional information: "Gas Block Journal 0.75", a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Two sellers' pages state the one diameter; none is the maker's own page.
The gas port's diameter0.078 in ± 0.0005 in 2 mmProvisionalPublished: AR15Discounts, Geissele Automatics 16.25" CHF Government Phosphate 1:7 Midlengtrh Barrel - 05-2984, Specifications, a seller, read Oct 28, 2026
Published “Gas Port: .078” used
AR15Discounts, Geissele Automatics 16.25" CHF Government Phosphate 1:7 Midlengtrh Barrel - 05-2984, Specifications, a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
One seller's page (provisional). The 14.5 in sibling's sellers print .076 and the 13.9 in's .081: each barrel its own.
The barrel extension's rear end behind the barrel's breech end0.501 in ± 0.01 in 12.7 mmProvisionalWorked out: {std.ar15.barrel_extension_behind_breech}
Worked out 0.501 in ± 0.01 in used
{std.ar15.barrel_extension_behind_breech}, from the site owner
The standard's (the reference CAD set's extension less the Army's .620 tenon: std.ar15.barrel_extension_length, std.ar15.barrel_tenon_length), as the catalog's other 5.56 barrels take it: the sellers state an M4 extension (Primary Arms: "Feed Ramps M4"; AR15Discounts: "Barrel Extension: M4 Feedramps") and nothing of its size.
The barrel extension's body, its diameter (what goes into the receiver)0.999 in ± 0.001 in 25.4 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_od}
Worked out 0.999 in ± 0.001 in used
{bcm-16-mid-barrel.extension_od}, from the site owner
The Army's limit on the assembly drawing (8448548: "DIAMETER NOT TO EXCEED .9990 FOR THIS LENGTH AFTER ASSEMBLY AND BEFORE FINISH"), as read for BCM's barrel's ledger, where the drawing and its page are cited.
Not read off this photo: with the journal it is what the photo's scale is taken from (at the journal's scale alone it reads .974, which is how the photo's yaw shows: outline_extension_od).
The bore's diameter (across the lands)0.219 in ± 0.001 in 5.6 mmConfirmedWorked out: {bcm-16-mid-barrel.bore_d}
Worked out 0.219 in ± 0.001 in used
{bcm-16-mid-barrel.bore_d}, from the site owner
The Army's barrel drawing (8448549 sheet 2, Section U-U: ".219 DIA+.001"), as read for BCM's barrel's ledger, where the drawing and its page are cited.
The cartridge's, for the hole the model cuts: the sellers state "Chambered in 5.56 NATO" and no bore.
The barrel indexing pin's diameter0.125 in ± 0.00025 in 3.2 mmConfirmedWorked out: {bca-556-16-mid-barrel.index_pin_d}
Worked out 0.12525 in ± 0.00025 in used
{bca-556-16-mid-barrel.index_pin_d}, from the site owner
The Army's own part (8448551, Pin, Barrel Indexing: ".1255 DIA -.0005"), as read for Bear Creek's barrel's ledger, where the drawing and its page are cited.
The barrel indexing pin's top above the extension's surface0.094 in ± 0.01 in 2.4 mmConfirmedWorked out: {bca-556-16-mid-barrel.index_pin_protrusion}
Worked out 0.094 in ± 0.01 in used
{bca-556-16-mid-barrel.index_pin_protrusion}, from the site owner
The Army's assembly drawing (8448548, Section A-A: ".094 MAX"), as read for Bear Creek's barrel's ledger, where the drawing and its page are cited.
A limit, and the model draws the pin at it. In Primary Arms' side photo the pin is on the far side (the photo shows the journal's underside): it isn't on the silhouette.
The barrel indexing pin's axis behind the flange's rear face0.063 in ± 0.01 in 1.6 mmConfirmedWorked out: {.index_pin_d} / 2
Worked out 0.0626 in ± 0.01 in used
{.index_pin_d} / 2, from the site owner
The pin standing against the flange, as the Army's Section A-A draws it (Bear Creek's barrel's ledger, where the drawing is cited): its axis half its diameter behind the face. AR15Discounts' picture of this number from above (d8cb93933e36, a grey rendering, 700 px, about 38 px to the inch) has the pin's round top just behind the flange, in line with the gas port: too small a picture to read the station on.
The barrel extension's rear opening, its diameter at the rear face0.77 in ± 0.005 in 19.6 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_d}
Worked out 0.77 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_d}, from the site owner
The inside of a mil-spec M4 extension as the reference CAD set has it, for how the rear end looks (the sellers: "Feed Ramps M4", "Barrel Extension: M4 Feedramps"; AR15Discounts' pictures of this number's breech, 8c26bfec846f and cb50ea82427d, show the lugs and the ramps). Appearance only; the six figures of the opening are the readings made for BCM's barrel's ledger, where the file and the method are cited.
The rear opening's chamfer, its depth (at 45°, also how far it narrows the opening's radius)0.045 in ± 0.005 in 1.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_chamfer}
Worked out 0.045 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_chamfer}, from the site owner
The circle the extension's locking lugs leave between their tips0.572 in ± 0.003 in 14.5 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_bore_d}
Worked out 0.572 in ± 0.003 in used
{bcm-16-mid-barrel.extension_lug_bore_d}, from the site owner
The locking lugs' front faces, ahead of the extension's rear end0.214 in ± 0.005 in 5.4 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_depth}
Worked out 0.214 in ± 0.005 in used
{bcm-16-mid-barrel.extension_lug_depth}, from the site owner
The recess ahead of the lugs, which the bolt's lugs turn in: its diameter0.83 in ± 0.003 in 21.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_d}
Worked out 0.83 in ± 0.003 in used
{bcm-16-mid-barrel.extension_recess_d}, from the site owner
The recess's front end, ahead of the extension's rear end0.595 in ± 0.005 in 15.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_depth}
Worked out 0.595 in ± 0.005 in used
{bcm-16-mid-barrel.extension_recess_depth}, from the site owner
The muzzle thread's major diameter (its crests)0.496 in ± 0.0033 in 12.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_major_d}
Worked out 0.4957 in ± 0.0033 in used
{bcm-16-mid-barrel.thread_major_d}, from the site owner
8448549 sheet 1, Section M-M: "1/2-28 UNEF-2A MAJOR DIA .4989/.4924", as read for BCM's barrel's ledger.
The Army barrel's 1/2-28 thread, for the 1/2 x 28 the sellers state: what the model's thread is drawn at. The photo's silhouette of the thread is .494 through its distortion (59.86 px over columns 110 to 160).
The muzzle thread's minor diameter (its roots)0.455 in ± 0.002 in 11.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_minor_d}
Worked out 0.4551 in ± 0.002 in used
{bcm-16-mid-barrel.thread_minor_d}, from the site owner
8448549 sheet 1, Section M-M: "MINOR DIA .4551 MAX", as read for BCM's barrel's ledger.
The muzzle thread's pitch0.036 in ± 0.00005 in 0.9 mmCorroboratedPublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 16" (05-2984), Specifications; its Features: "Threaded 1/2x28", a seller, read Oct 28, 2026
Photo 0.03573 in ± 0.0004 in
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: the scale along the barrel at the thread (column 135), through the radial distortion its journal and its extension fix: 118.95 px/in. Read by the thread's face toward the lens, rows 720 to 740 over columns 104 to 165: a Fourier fit of the grey along it, 4.25 px a pitch (± 0.05); the edges' rows give 4.21 and 4.26
The check of the photo's distortion, not a reading the model uses: at the journal's scale alone it would be 0.0347.
Published “Thread Pattern 1/2 X 28” used
Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 16" (05-2984), Specifications; its Features: "Threaded 1/2x28", a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Muzzle Thread: 1/2 x 28”
AR15Discounts, Geissele Automatics 16.25" CHF Government Phosphate 1:7 Midlengtrh Barrel - 05-2984, Specifications; its Additional information: "Muzzle Thread Pattern 1/2×28", a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Two sellers' pages state the one thread; the photo's pitch agrees through the distortion its journal and extension fix.
28 threads to the inch, by the sellers' statement: not a measurement of this barrel.
Barrel length as its sellers state it for the maker16 in ± 0.05 in 406.4 mmConflictPublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 16" (05-2984), Specifications; its Features: "16\" cold hammer-forged barrel", a seller, read Oct 28, 2026
Published “Barrel Length 16” used
Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 16" (05-2984), Specifications; its Features: "16\" cold hammer-forged barrel", a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Length: 16.25″”
AR15Discounts, Geissele Automatics 16.25" CHF Government Phosphate 1:7 Midlengtrh Barrel - 05-2984 (MPN 05-2984, UPC 810081134903), Specifications; the same page's Additional information has "Barrel Length 16\"", a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
The figure two pages state (Primary Arms' table, features and title; AR15Discounts' own Barrel Length field), against one list on one page. The photo reads between the two and can't choose (see the note). Both make the barrel 16 in or more: a rifle's, under the Act, either way.
primary-arms and ar15discounts differ by 0.25 in beyond what each states it is good to.
The nominal length: what the site's federal-law line goes by. Stated two ways. Primary Arms' table and features, its title and its picture's alt text say 16; AR15Discounts says 16.25 in its title and in its Specifications list (the list in the maker's table's words: "Length:", "Rifling:", "Gas Port:", "Barrel Extension:", as Mile High copies them for the 14.5 in barrel) and 16 in its own filter field ("Barrel Length 16\""). No page says between which points; the Army's barrel drawing (8448549) dimensions a barrel from its breech end, inside the extension, and overall_length takes it so. The photo doesn't decide: through the lens distortion its journal and its extension fix (and its thread's pitch checks), its end faces are 16.614 in apart, 0.7% over 16.501 and 0.8% under 16.751 (the 14.5 in and 13.9 in barrels' photos read 0.6% and 1.2% under theirs), and its gas block's dimple lands at 9.08 ahead of the receiver's face at 16 and 9.22 at 16.25, either side of the mid-length ports on file (9.13 to 9.17). Either is 16 in or more.
End to end, the extension's rear to the muzzle16.501 in ± 0.07 in 419.1 mmProvisionalWorked out: {.length} + {.extension_behind_breech}
Photo 16.614 in ± 0.12 in
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (45.874 px of radius over columns 805 to 905, the silhouette at grey 235: 122.33 px/in) and its extension's body as the Army's .999 (59.543 px over columns 1990 to 2080), through a radial lens distortion about the journal's middle (column 855) that those two fix: k = -1.743e-8 per px², the scale across the barrel 1 + k r², along it 1 + 3 k r², r the distance from column 855 undistorted. Read by its two end faces, each behind its rim's arc (tools/trace.py's `ends`: the extension's rear at column 2088.9, its arc 0.119 in at 13.9° off square; the muzzle's at 99.9, 0.096 in at 21.8°), undistorted. Check: the thread's crests, 28 to the inch by the sellers, read 4.25 px a pitch over 62 columns (a Fourier fit of the thread's face, rows 720 to 740), where the model has 4.248
Worked out 16.501 in ± 0.07 in used
{.length} + {.extension_behind_breech}, harvested
Lengths at the published length's scale, as the catalog's other barrels: the photo is within its ± of it.
The photo, through the radial distortion its journal (.750, published) and its extension (.999, the Army's limit) fix about the journal's middle, has its two end faces 16.614 apart: 0.7% over the published length's 16.501 (and 0.8% under the 16.751 AR15Discounts' 16.25 would make it). At the journal's scale alone they are 16.259 apart, and the thread's 28 to the inch reads 2.7% off there; a straight yaw between the journal and the extension (the 13.9 in barrel's correction, which has both of those right) leaves it 4.4% off the other way, and puts the thread's crests at .482, under the Army's .4924. Through the distortion the crests' silhouette is .494 and the pitch within 0.05%. The published length is the scale for lengths, as the catalog's other barrels'.
The barrel extension's rear end, from the flange's rear face (negative: inside the receiver)-1 in ± 0.03 in -25.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo -1 in ± 0.03 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the rear end's face (column 2088.9, behind its rim's 17 px arc) to the flange's rear face (column 1975.0: the silhouette's step between the flange's rim and the extension's body at 0.93 of the flange's radius, column 1980.3, less its rear rim's ellipse there, the face seen from 12° off square)
The extension flange's front face, ahead of its rear face (the flange's thickness)0.155 in ± 0.025 in 3.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.155 in ± 0.025 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to its front face (column 1957.2: the step at 0.93 of its radius, column 1952.0, and its front rim's ellipse). The blur of a 122 px/in photo widens both corners: the reference CAD set's flange is 0.131 thick
The barrel extension's flange, its diameter1.166 in ± 0.008 in 29.6 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 1.166 in ± 0.008 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (45.874 px of radius over columns 805 to 905, the silhouette at grey 235: 122.33 px/in) and its extension's body as the Army's .999 (59.543 px over columns 1990 to 2080), through a radial lens distortion about the journal's middle (column 855) that those two fix (the extension's diameter 2.6% small, 1180 px off); the scale across the barrel at this station. Read by the silhouette's widest, columns 1962 to 1970: 69.73 px of radius
The chamber section's diameter, ahead of the flange0.982 in ± 0.008 in 24.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.982 in ± 0.008 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (45.874 px of radius over columns 805 to 905, the silhouette at grey 235: 122.33 px/in) and its extension's body as the Army's .999 (59.543 px over columns 1990 to 2080), through a radial lens distortion about the journal's middle (column 855) that those two fix (the extension's diameter 2.6% small, 1180 px off); the scale across the barrel at this station. Read by columns 1870 to 1945: 58.85 px of radius
Where the chamber section ends and the barrel begins to narrow, ahead of the extension's face0.937 in ± 0.03 in 23.8 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.937 in ± 0.03 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to where a line through the chamber section's radius (columns 1870 to 1945) meets a line through the cone's (columns 1725 to 1850)
Where the cone ahead of the chamber ends and the long taper begins, ahead of the extension's face2.32 in ± 0.04 in 58.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 2.32 in ± 0.04 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to where a line through the cone's radius (columns 1725 to 1850) meets a line through the long taper's (columns 1050 to 1650)
The long taper's diameter at its rear end (the Geissele Taper Profile's thick end)0.728 in ± 0.008 in 18.5 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.728 in ± 0.008 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (45.874 px of radius over columns 805 to 905, the silhouette at grey 235: 122.33 px/in) and its extension's body as the Army's .999 (59.543 px over columns 1990 to 2080), through a radial lens distortion about the journal's middle (column 855) that those two fix (the extension's diameter 2.6% small, 1180 px off); the scale across the barrel at this station. Read by the two lines' crossing (column 1704): 43.42 px of radius
Where the long taper ends and the barrel flares to the gas block's collar, ahead of the extension's face8.21 in ± 0.04 in 208.5 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 8.21 in ± 0.04 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to where a line through the long taper's radius (columns 1050 to 1650) meets a line through the flare's (columns 950 to 990): column 990
The long taper's diameter at its front end (the barrel's thinnest behind the gas block)0.665 in ± 0.008 in 16.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.665 in ± 0.008 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (45.874 px of radius over columns 805 to 905, the silhouette at grey 235: 122.33 px/in) and its extension's body as the Army's .999 (59.543 px over columns 1990 to 2080), through a radial lens distortion about the journal's middle (column 855) that those two fix (the extension's diameter 2.6% small, 1180 px off); the scale across the barrel at this station. Read by the two lines' crossing at column 990
The collar behind the gas block journal, its diameter0.842 in ± 0.008 in 21.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.842 in ± 0.008 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (45.874 px of radius over columns 805 to 905, the silhouette at grey 235: 122.33 px/in) and its extension's body as the Army's .999 (59.543 px over columns 1990 to 2080), through a radial lens distortion about the journal's middle (column 855) that those two fix (the extension's diameter 2.6% small, 1180 px off); the scale across the barrel at this station. Read by columns 921 to 930: 51.50 px of radius
Where the collar's full diameter ends, ahead of the extension's face8.678 in ± 0.03 in 220.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 8.678 in ± 0.03 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to the last column within 0.15 px of the collar's full radius
The gas block journal's rear shoulder (the collar's front face) ahead of the extension's face8.776 in ± 0.03 in 222.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 8.776 in ± 0.03 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to the collar's front face (column 920.4: the silhouette's step at 0.95 of the way from the journal's radius to the collar's, column 918.6, less the face's rim's ellipse there, the face seen from 8° off square; columns 915 to 917 are the dark relief at the face's foot)
The gas port ahead of the extension's face9.079 in ± 0.04 in 230.6 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 9.079 in ± 0.04 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to the dimple's centre: a circle through its rim on an eight-fold enlargement, columns 873.8 to 892.5 and rows 720 to 737 (2.5 px above the axis at row 731: it faces the lens), column 883.1
The gas block journal's front end (where the barrel begins to narrow) ahead of the extension's face9.793 in ± 0.03 in 248.7 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 9.793 in ± 0.03 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to where a line through the journal's radius (columns 805 to 905) meets a line through the cone's ahead of it (columns 715 to 780)
Where the cone ahead of the journal ends and the muzzle section begins, ahead of the extension's face10.5 in ± 0.04 in 266.7 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 10.5 in ± 0.04 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to where a line through the cone's radius (columns 715 to 780) meets a line through the muzzle section's (columns 240 to 690)
The muzzle section's diameter, between the cone ahead of the journal and the ring behind the shoulder0.667 in ± 0.008 in 16.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.667 in ± 0.008 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (45.874 px of radius over columns 805 to 905, the silhouette at grey 235: 122.33 px/in) and its extension's body as the Army's .999 (59.543 px over columns 1990 to 2080), through a radial lens distortion about the journal's middle (column 855) that those two fix (the extension's diameter 2.6% small, 1180 px off); the scale across the barrel at this station. Read by columns 240 to 690: 40.72 px of radius (± 0.2 px along it: a cylinder)
The rear end of the ring behind the muzzle shoulder, ahead of the extension's face14.67 in ± 0.03 in 372.6 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 14.67 in ± 0.03 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to the last column within 0.15 px of the ring's full radius (200: 42.61 px, 42.4 at 202 and falling)
Where the ring's rear chamfer meets the muzzle section, ahead of the extension's face14.508 in ± 0.03 in 368.5 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 14.508 in ± 0.03 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to the first column at the muzzle section's radius behind the ring (213: 40.86 px)
The muzzle shoulder ahead of the extension's face14.845 in ± 0.03 in 377.1 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 14.845 in ± 0.03 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the flange's rear face (column 1975.0) to the shoulder's face (column 178.4: the silhouette's step at 0.95 of the way from the thread's radius to the ring's, column 173.5, and the ring's front rim's ellipse there, the face seen from 21° off square: the rise from the thread's crests at column 169 is that ellipse)
The muzzle thread's length0.656 in ± 0.03 in 16.7 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.656 in ± 0.03 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces (columns 2088.9 and 99.9, each behind its rim's arc: outline_rear_face and outline_front_face, tools/trace.py), 16.614 in apart through the same distortion (its scale along the barrel falls three times as fast as across it, and the thread's 28 to the inch read 4.25 px a pitch where it gives 4.248), stretched by 0.99322 to overall_length (16.501). Read by the shoulder's face (column 178.4) to the muzzle's face (column 99.9, behind its rim's 12 px arc)
The diameter behind the muzzle thread0.705 in ± 0.008 in 17.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.705 in ± 0.008 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (45.874 px of radius over columns 805 to 905, the silhouette at grey 235: 122.33 px/in) and its extension's body as the Army's .999 (59.543 px over columns 1990 to 2080), through a radial lens distortion about the journal's middle (column 855) that those two fix (the extension's diameter 2.6% small, 1180 px off); the scale across the barrel at this station. Read by columns 180 to 196: 42.78 px of radius
The extension's body as the side photo has it at the journal's scale0.974 in ± 0.006 in 24.7 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.9735 in ± 0.006 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 45.874 px of radius over columns 805 to 905, 122.33 px/in). Read by the extension's body, columns 1990 to 2080: 59.543 px of radius (59.69 over its first 45 columns, 59.36 over its last 40)
Against extension_od (.999) this is how far the photo's scale across the barrel has fallen between the journal and the extension: 2.6% in 1180 px. The model takes it as a radial distortion about outline_journal_x (the scale along the barrel falls three times as fast), which puts the thread's pitch where the sellers' 28 to the inch has it.
The middle of the extension's body in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)0.576 in ± 0.02 in 14.6 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.576 in ± 0.02 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: the traced outline's scale: 122.33 px/in. Read by column 2035, the middle of the stretch outline_extension_od is read on, from the silhouette's rear tip (column 2105.5)
The middle of the gas block journal in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale): the centre of the photo's distortion10.222 in ± 0.02 in 259.6 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 10.222 in ± 0.02 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: the traced outline's scale: 122.33 px/in. Read by column 855, the middle of the stretch the journal's .750 is read on (805 to 905), from the silhouette's rear tip (column 2105.5)
Taken as the centre of the radial distortion: where the published .750 is read, the scale is the photo's own. The thread's pitch puts the centre within 75 px (0.6 in) of it.
The dimple on the journal for a gas block's set screw: its diameter at the journal's surface0.153 in ± 0.01 in 3.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.153 in ± 0.01 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal as the published .750 (122.33 px/in at its middle). Read by a circle through the dimple's rim on an eight-fold enlargement: columns 873.8 to 892.5, 18.7 px
A drilled spot under the port, opposite it (the sibling barrels' sellers: "There is one dimple machined in for a gas block set screw"; no page for 05-2984 says so). Not drawn: its depth isn't sourced (dimple_depth).
The dimple on the journal: its depthNo value yetMissingNo source yet
No source: the photos look into it. Not drawn until a figure or a view with its edge on the silhouette is on file.
The slot along the collar's top, in line with the gas port: its widthNo value yetMissingNo source yet
Primary Arms' three-quarter photo (f8d6141d8f0c) shows a notch in the collar's top in line with the port, a few pixels across; the side photo has it on the far side. Not read, and not drawn.
The flange as the side photo has it at the journal's scale: the traced outline's scale reference1.14 in ± 0.007 in 29 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 1.14 in ± 0.007 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 45.874 px of radius over columns 805 to 905, 122.33 px/in). Read by the silhouette's widest, columns 1962 to 1970: 69.73 px of radius against the journal's 45.874
Not the flange's size (flange_od, 1.166): at the journal's scale everything at the breech end of this photo reads 2.3 to 2.6% small (a radial distortion about the journal: overall_length). The traced outline is at this one scale throughout; the model corrects it by outline_extension_od, outline_extension_x and outline_journal_x.
The extension's rear face in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)0.136 in ± 0.017 in 3.5 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, 2200 x 1467
Photo 0.136 in ± 0.017 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from geissele-16-chf-barrel.outline_flange_od = 1.14 in (y-extent 139 px → 122.0 px/in). Read by the min end's face: the silhouette's tip at 0.017 less its rim's arc, 0.119 in of sag at radius 0.481023 (the end is seen from 13.9° off square; arc fitted over 121 rows, rms 0.012) of the traced outline (tools/trace.py); the extension's rear face in the outline's own frame (from its rear tip, at the journal's scale)
Where the outline is cut: the silhouette's tip is the rear rim's near side, which stands behind the face by the rim's arc.
The muzzle's face in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)16.395 in ± 0.101 in 416.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, 2200 x 1467
Photo 16.395 in ± 0.101 in used
Primary Arms' gallery, 05-2984_02: the barrel level on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from geissele-16-chf-barrel.outline_flange_od = 1.14 in (y-extent 139 px → 122.0 px/in). Read by the max end's face: the silhouette's tip at 16.492 less its rim's arc, 0.096 in of sag at radius 0.240949 (the end is seen from 21.8° off square; arc fitted over 121 rows, rms 0.002) of the traced outline (tools/trace.py); the muzzle's face in the outline's own frame (from its rear tip, at the journal's scale)
Where the outline is cut: the silhouette's front tip is the muzzle rim's near side.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Barrel extension
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Muzzle thread
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake, HUXWRX Flash Hider-QD 556 1/2x28 (fit unchecked), Mil-spec A2 flash hider, 1/2-28 (drawing 9349051), Nordic Components 1/2-28 thread protector (ships on the 22RB), Otter Creek Labs Polonium, Otter Creek Labs Polonium K, Precision Armament M4-72 Severe-Duty® Compensator, SilencerCo Sparrow 22 (fit unchecked), SureFire ProComp 556 Muzzle Brake, SureFire SOCOM 3-Prong Flash Hider, SureFire SOCOM 4-Prong Flash Hider, SureFire WARCOMP Flash Hider, Taurus TX22 Thread Protector, VG6 Precision GAMMA 556
Gas block journal
- Gas blocks
- Aero Precision .750 low profile gas block, BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers, BCM Low Profile Gas Block (steel with set screws) 750, SLR Rifleworks Sentry 7 Set Screw Adjustable Gas Block, Superlative Arms .750" Adjustable Gas Block, Bleed Off - Set Screw
Gas system length
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $365.00 Nov 21, 2026, out of stock that day
- AR15Discounts $365.00 Nov 21, 2026, out of stock that day