Muzzle device
VG6 Precision GAMMA 556
VG6 Precision's brake and compensator in one, now made and sold by Aero Precision under APVG200001A (Primary Arms calls it the GEN 2): two chambers, each with a large port through both sides and narrow slots under it, a slot over the top from the front face back over both chambers with three small holes either side, a three-lobed exit, and a rear section with wrench flats, two grooves and one hole on top. 17-4 PH stainless steel in black nitride, timed with the crush washer it comes with. Not a suppressor mount. The first generation, APVG100001A (no top slot, rows of round holes beside its side ports, a taper to the rear section; 1.75 in and 2.1 oz by Midwest Gun Works' page), is the older product, and not this one. Aero: "optimized to efficiently utilize gas from the muzzle on 10.5-18.5” barrel lengths", and it "virtually eliminates recoil and muzzle movement during firing": the maker's claim, with no figure behind it on file (LoadoutRoom's review, of a Gamma on a .300 Blackout: "no scientific testing was needed").

- Weight
- 2.22 oz Conflictpublished: Wing Tactical, VG6 GAMMA 556 Muzzle Brake by VG6 Precision (MPN "APVG200001A / APVG200010A"; its own photographs of the second generation), a seller, read Oct 28, 2026Its sources span 2.05 oz to 2.23 oz.
- Lowest price
- $80.99 at Wing Tactical, read Nov 21, 2026
- Made for
- For 5.56mm / .223 Rem
- Maker's number
- APVG200001A
- Colour
- Black nitride
- Drawn as
- modelled
- Maker's page
- aeroprecisionusa.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Mil-spec A2 flash hider, 1/2-28 (drawing 9349051).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (rear face to front face, the washer not included)1.83 in 46.5 mmConflictPublished: Wing Tactical, VG6 GAMMA 556 Muzzle Brake by VG6 Precision (MPN "APVG200001A / APVG200010A"; its own photographs of the second generation), a seller, read Oct 28, 2026
Published “Length: 1.83"” used
Wing Tactical, VG6 GAMMA 556 Muzzle Brake by VG6 Precision (MPN "APVG200001A / APVG200010A"; its own photographs of the second generation), a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Length: 1.75″”
AT3 Tactical, VG6 Gamma 556 AR-15 Muzzle Device - 1/2x28 - 5.56 NATO ("SKU: APVG200001A"), a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Dimensions 1.75 × 0.86 × 0.86 in”
AR15 Discounts, VG6 GAMMA 556 - APVG200001A, a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Length: 1.72 in”
Bear Creek Arsenal, VG6 GAMMA 556 Muzzle Brake ("SKU APVG200001A"), a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Its "Specifications for VG6 Precision VG6 Gamma Muzzle Device" block. The same page's overview says "Length 2.21"" (the next entry).
Published “Length 2.21"”
Bear Creek Arsenal, VG6 GAMMA 556 Muzzle Brake ("SKU APVG200001A"), a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
The overview's list on the same page, beside "Diameter 0.86"" and "Weight 0.18" (no unit). 2.57 times the diameter: no photo of the device is that long.
Photo 1.84 in ± 0.03 in
Aero's own gallery: the left side, the underside and the top, 1000 x 630), a935992d9bfd (Resilient Arms' top view, 450 x 820) and e392a62ddc82 (Primary Arms, APVG200001A_01: standing, from about 7 degrees above, harvested
Scale: the head's diameter in each, as od (0.86). Read by the silhouette's length over its head's width at a level of 200 of 255: 2.139 to 2.16 on Aero's three and Resilient's; 2.25 on Primary Arms', less the front face's ellipse seen from above (70 px of 565 across: 7.1 degrees), 2.15. The ± spans them and the black edge's thinning on white (up to 3% of the width)
The one seller whose figures are its own (its weight, diameter and bore are not the others' reprinted copy), and the length the maker's own photos and Primary Arms' give at the stated 0.86 diameter (1.84). 1.75 is the first generation's published length (Midwest Gun Works, APVG100001A), reprinted on second-generation pages with its weight; 1.72 and 2.21 are one page's two blocks.
wing and at3 differ by 0.08 in beyond what each states it is good to.
wing and ar15discounts differ by 0.08 in beyond what each states it is good to.
wing and bearcreek differ by 0.11 in beyond what each states it is good to.
wing and bearcreek_overview differ by 0.38 in beyond what each states it is good to.
at3 and bearcreek differ by 0.03 in beyond what each states it is good to.
at3 and bearcreek_overview differ by 0.46 in beyond what each states it is good to.
at3 and photo differ by 0.09 in beyond what each states it is good to.
ar15discounts and bearcreek differ by 0.03 in beyond what each states it is good to.
ar15discounts and bearcreek_overview differ by 0.46 in beyond what each states it is good to.
ar15discounts and photo differ by 0.09 in beyond what each states it is good to.
bearcreek and bearcreek_overview differ by 0.49 in beyond what each states it is good to.
bearcreek and photo differ by 0.12 in beyond what each states it is good to.
bearcreek_overview and photo differ by 0.37 in beyond what each states it is good to.
Crush washer, thickness (between the barrel's shoulder and the device's rear face)0.105 in ± 0.03 in 2.7 mmProvisionalPhoto: Primary Arms, APVG200001A_01: the device standing and its crush washer lying beside it, from about 7 to 16 degrees above, 2200 x 1467
Photo 0.105 in ± 0.03 in used
Primary Arms, APVG200001A_01: the device standing and its crush washer lying beside it, from about 7 to 16 degrees above, 2200 x 1467, harvested
Scale: the device's head in the same photo, 565 px across, as od (0.86). Read by the washer's silhouette row by row at a level of 200 of 255: its widest run (478 px) is its outside diameter; the rows at that width (66 px) are its outer face seen nearly side on, its height over the cosine of the view's angle (16 degrees, from its top ellipse: 134 px for 478 across)
"Includes crush washer" (Primary Arms; Aero's sellers the same). As read uncrushed in a photo: a crush washer is flattened some way as the device is timed, by an amount no source states, and the ± takes that in.
Length ahead of the barrel's shoulder, installed (to the front face; the crush washer's thickness included)1.935 in 49.1 mmProvisionalWorked out: {.washer_thickness} + {.overall_length}
Worked out 1.935 in used
{.washer_thickness} + {.overall_length}, harvested
The washer against the shoulder, the device against the washer.
Largest outside diameter (the head, and the rear section between its flats)0.86 in 21.8 mmCorroboratedPublished: AT3 Tactical, VG6 Gamma 556 AR-15 Muzzle Device - 1/2x28 - 5.56 NATO ("SKU: APVG200001A"), a seller, read Oct 28, 2026
Published “Diameter: .86″” used
AT3 Tactical, VG6 Gamma 556 AR-15 Muzzle Device - 1/2x28 - 5.56 NATO ("SKU: APVG200001A"), a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Dimensions 1.75 × 0.86 × 0.86 in”
AR15 Discounts, VG6 GAMMA 556 - APVG200001A, a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Diameter 0.86"”
Bear Creek Arsenal, VG6 GAMMA 556 Muzzle Brake ("SKU APVG200001A"), a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “Outer Diameter: 0.865"”
Wing Tactical, VG6 GAMMA 556 Muzzle Brake by VG6 Precision (MPN "APVG200001A / APVG200010A"; its own photographs of the second generation), a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Three sellers state .86; Wing Tactical's .865 is within its last digit. The photos read the side view's width the same from the front face to the rear one: one diameter, the rear section's narrower look from above being its flats.
Barrel thread length it takes, or is made forNo value yetMissingNo source yet
No page on file states how deep its threaded bore is, or what barrel thread it is made for: missing, and not given to the interface.
Threaded bore's depth from the rear face (as drawn)0.6 in ± 0.1 in 15.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the threaded bore's depth. It is drawn stopping short of the rear port, which begins 0.75 in ahead of the rear face, and it shows only from behind.
Worked out 0.6 in ± 0.1 in used
An assumption for the drawing, not a reading: no view on file shows the threaded bore's depth. It is drawn stopping short of the rear port, which begins 0.75 in ahead of the rear face, and it shows only from behind., harvested
Bore through the baffles and the front face, diameter0.27 in 6.9 mmProvisionalPublished: Wing Tactical, VG6 GAMMA 556 Muzzle Brake by VG6 Precision (MPN "APVG200001A / APVG200010A"; its own photographs of the second generation), a seller, read Oct 28, 2026
Published “Bore Diameter: 0.27"” used
Wing Tactical, VG6 GAMMA 556 Muzzle Brake by VG6 Precision (MPN "APVG200001A / APVG200010A"; its own photographs of the second generation), a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Front face's edge chamfer0.02 in ± 0.01 in 0.5 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.02 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
The width rolls off over 9 rows at the front face and over about as many at the rear; a corner that round is drawn as a 45-degree chamfer.
Rear face's edge chamfer0.02 in ± 0.01 in 0.5 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.02 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
Front side port, its rear edge (from the rear face)1.274 in ± 0.01 in 32.4 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 1.274 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
Rows 385 to 511 show backdrop through both side walls: 0.115 to 0.304 of the length from the front face. Aero's side view (9a99cc0f47f2): 0.114 to 0.300.
Front side port, its front edge (from the rear face)1.62 in ± 0.01 in 41.1 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 1.62 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
Front side port, its height (through the device from side to side)0.577 in ± 0.01 in 14.7 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.577 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
200 px of backdrop between 298 of dark over the port's middle rows. Aero's side view: 101 of 150, 0.579. The top views' notch there (0.765 of the diameter across) would make it 0.555 for a square-sided through cut: the side views, square on the port, are taken.
Rear side port, its rear edge (from the rear face)0.754 in ± 0.01 in 19.2 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.754 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
Rows 556 to 700: 0.372 to 0.588 of the length from the front face. Aero's side view: 0.372 to 0.589.
Rear side port, its front edge (from the rear face)1.149 in ± 0.01 in 29.2 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 1.149 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
Rear side port, its height0.631 in ± 0.02 in 16 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.631 in ± 0.02 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
220 px of backdrop between 300 of dark. Aero's side view reads 109 of 153, 0.613, and the top views' notch (0.71 of the diameter across) 0.608: the ± takes in all three.
Side ports' corner radius (in the side view)0.09 in ± 0.02 in 2.3 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.09 in ± 0.02 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
The backdrop through each port grows to its full height over 33 rows (front) and 39 (rear) from the port's edge: 0.09 and 0.107 in.
Wrench flats on the rear section, across (left and right sides)0.738 in ± 0.012 in 18.7 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 0.738 in ± 0.012 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
309 px of 360 from the rear port back to the rear face, but where the second groove cuts deeper: the rear section seen from above is narrower than the head by its flats, and the side views have it the head's width. Primary Arms' standing photo: 489 of 565 (0.744); Wing Tactical's top view 261 of 297 (0.756).
Front groove, its rear edge (from the rear face)0.489 in ± 0.01 in 12.4 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.489 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
Its edges' middles at rows 748 and 797: 0.660 to 0.733 of the length from the front face. Aero's side view: 0.661 to 0.733.
Front groove, its front edge (from the rear face)0.622 in ± 0.01 in 15.8 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.622 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
Front groove, diameter at its root0.786 in ± 0.012 in 20 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.786 in ± 0.012 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
275 px of 301. Aero's side view 139 of 153 (0.781). Larger than across the flats, so the flats run through it: from above it doesn't show in the outline.
Rear groove, its rear edge (from the rear face)0.258 in ± 0.01 in 6.6 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.258 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
Its edges' middles at rows 838 and 881: 0.795 to 0.859 of the length from the front face. Resilient's top view: 0.803 to 0.866.
Rear groove, its front edge (from the rear face)0.375 in ± 0.01 in 9.5 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.375 in ± 0.01 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
Rear groove, diameter at its root0.703 in ± 0.012 in 17.9 mmProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 0.703 in ± 0.012 in used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
246 px of 301. Aero's side view 125 of 153 (0.703); Resilient's top view 293 of 360 (0.700): under the flats, so it shows from above too.
Top slot, width0.263 in ± 0.012 in 6.7 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 0.263 in ± 0.012 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
Its two walls' lit edges 110 px apart, of the head's 360; the dark between them 102 (0.244). Centred 6 px right of the silhouette's middle: the photo is rolled about 2 degrees.
Top slot, from the front face to its rounded end0.718 in ± 0.012 in 18.2 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 0.718 in ± 0.012 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
Row 24 to row 326, the end's lit rim: over the front port and the web and into the rear port's length.
Top slot, its floor's height above the bore axis (as drawn)0.11 in ± 0.05 in 2.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the slot's floor. Primary Arms' photo from above shows the slot open into the front chamber and its end at the front face reaching the exit's upper lobe; it is drawn a little under the bore's top (0.135), so that it opens into the bore along its width through the web and the front ring, and into both chambers.
Worked out 0.11 in ± 0.05 in used
An assumption for the drawing, not a reading: no view on file shows the slot's floor. Primary Arms' photo from above shows the slot open into the front chamber and its end at the front face reaching the exit's upper lobe; it is drawn a little under the bore's top (0.135), so that it opens into the bore along its width through the web and the front ring, and into both chambers., harvested
The small holes either side of the slot, diameter0.052 in ± 0.008 in 1.3 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 0.052 in ± 0.008 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
22 px along the device on the crop's scale. Three each side, in a triangle, counted on Resilient's, Wing Tactical's and Aero's top views and on Primary Arms' three photos.
Small holes, the front one of each three (from the rear face)1.578 in ± 0.01 in 40.1 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 1.578 in ± 0.01 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
Centres at rows 130, 163 and 196 (front, middle, rear of each three), both sides.
Small holes, the middle one of each three (from the rear face)1.5 in ± 0.01 in 38.1 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 1.5 in ± 0.01 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
Small holes, the rear one of each three (from the rear face)1.421 in ± 0.01 in 36.1 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 1.421 in ± 0.01 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
Small holes, the front and rear of each three, off the slot's middle as seen from above0.272 in ± 0.01 in 6.9 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 0.272 in ± 0.01 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
115 and 113 px left and right of the slot's middle. On the round of the head that is 39 degrees off the top.
Small holes, the middle one of each three, off the slot's middle as seen from above0.215 in ± 0.01 in 5.5 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 0.215 in ± 0.01 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
91 and 89 px: 30 degrees off the top.
Narrow slots under the chambers, width0.055 in ± 0.01 in 1.4 mmProvisionalPhoto: Wing Tactical's three straight views: the left one, the underside
Photo 0.055 in ± 0.01 in used
Wing Tactical's three straight views: the left one, the underside, harvested
Scale: along, its own length, 670 px, as overall_length (1.83); across, its head, 297 px, as od (0.86). Read by slots placed by eye on a crop at 1.6 times size (± 3 px there, ± 0.005 in), the outline row by row at a level of 200 of 255
About 20 px of 297. Aero's underside view: 8.5 of 157 (0.047). Four under the front chamber, two under the rear, counted on both underside views and on Wing Tactical's photos from below the front.
The four slots under the front chamber, their rear ends (from the rear face)1.273 in ± 0.012 in 32.3 mmProvisionalPhoto: Wing Tactical's three straight views: the left one, the underside
Photo 1.273 in ± 0.012 in used
Wing Tactical's three straight views: the left one, the underside, harvested
Scale: along, its own length, 670 px, as overall_length (1.83); across, its head, 297 px, as od (0.86). Read by slots placed by eye on a crop at 1.6 times size (± 3 px there, ± 0.005 in), the outline row by row at a level of 200 of 255
0.121 to 0.304 of the length from the front face; Aero's underside: 0.121 to 0.305.
The four slots under the front chamber, their front ends (from the rear face)1.608 in ± 0.012 in 40.8 mmProvisionalPhoto: Wing Tactical's three straight views: the left one, the underside
Photo 1.608 in ± 0.012 in used
Wing Tactical's three straight views: the left one, the underside, harvested
Scale: along, its own length, 670 px, as overall_length (1.83); across, its head, 297 px, as od (0.86). Read by slots placed by eye on a crop at 1.6 times size (± 3 px there, ± 0.005 in), the outline row by row at a level of 200 of 255
The two slots under the rear chamber, their rear ends (from the rear face)0.76 in ± 0.015 in 19.3 mmProvisionalPhoto: Wing Tactical's three straight views: the left one, the underside
Photo 0.76 in ± 0.015 in used
Wing Tactical's three straight views: the left one, the underside, harvested
Scale: along, its own length, 670 px, as overall_length (1.83); across, its head, 297 px, as od (0.86). Read by slots placed by eye on a crop at 1.6 times size (± 3 px there, ± 0.005 in), the outline row by row at a level of 200 of 255
0.379 to 0.585 of the length from the front face; Aero's underside: 0.372 to 0.593.
The two slots under the rear chamber, their front ends (from the rear face)1.136 in ± 0.015 in 28.9 mmProvisionalPhoto: Wing Tactical's three straight views: the left one, the underside
Photo 1.136 in ± 0.015 in used
Wing Tactical's three straight views: the left one, the underside, harvested
Scale: along, its own length, 670 px, as overall_length (1.83); across, its head, 297 px, as od (0.86). Read by slots placed by eye on a crop at 1.6 times size (± 3 px there, ± 0.005 in), the outline row by row at a level of 200 of 255
The front chamber's inner two slots, off the middle as seen from below0.133 in ± 0.01 in 3.4 mmProvisionalPhoto: Wing Tactical's three straight views: the left one, the underside
Photo 0.133 in ± 0.01 in used
Wing Tactical's three straight views: the left one, the underside, harvested
Scale: along, its own length, 670 px, as overall_length (1.83); across, its head, 297 px, as od (0.86). Read by slots placed by eye on a crop at 1.6 times size (± 3 px there, ± 0.005 in), the outline row by row at a level of 200 of 255
45 and 47 px. Aero's underside: 0.123.
The front chamber's outer two slots, off the middle as seen from below0.272 in ± 0.01 in 6.9 mmProvisionalPhoto: Wing Tactical's three straight views: the left one, the underside
Photo 0.272 in ± 0.01 in used
Wing Tactical's three straight views: the left one, the underside, harvested
Scale: along, its own length, 670 px, as overall_length (1.83); across, its head, 297 px, as od (0.86). Read by slots placed by eye on a crop at 1.6 times size (± 3 px there, ± 0.005 in), the outline row by row at a level of 200 of 255
92.5 and 95.5 px. Aero's underside: 0.266.
The rear chamber's two slots, off the middle as seen from below0.206 in ± 0.012 in 5.2 mmProvisionalPhoto: Wing Tactical's three straight views: the left one, the underside
Photo 0.206 in ± 0.012 in used
Wing Tactical's three straight views: the left one, the underside, harvested
Scale: along, its own length, 670 px, as overall_length (1.83); across, its head, 297 px, as od (0.86). Read by slots placed by eye on a crop at 1.6 times size (± 3 px there, ± 0.005 in), the outline row by row at a level of 200 of 255
68.5 and 73.5 px. Aero's underside: 0.195.
Hole in the top of the rear section, its centre (from the rear face)0.119 in ± 0.008 in 3 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 0.119 in ± 0.008 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
Its centre at row 744 of 24 to 793; one hole, on top (none in either underside view).
Hole in the top of the rear section, diameter0.108 in ± 0.01 in 2.7 mmProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 0.108 in ± 0.01 in used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
45 px of the head's 360.
Hole in the top of the rear section, depth (as drawn)0.12 in ± 0.05 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file looks into the hole. Drawn blind, ending short of the threaded bore.
Worked out 0.12 in ± 0.05 in used
An assumption for the drawing, not a reading: no view on file looks into the hole. Drawn blind, ending short of the threaded bore., harvested
Exit's three lobes, how far each reaches from the axis on the front face (as drawn)0.2 in ± 0.05 in 5.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the exit is seen only obliquely (Primary Arms' APVG200001A_00, 7a565a7ca9cd), where three pointed lobes reach about halfway from the bore to the face's rim. Drawn at that.
Worked out 0.2 in ± 0.05 in used
An assumption for the drawing, not a reading: the exit is seen only obliquely (Primary Arms' APVG200001A_00, 7a565a7ca9cd), where three pointed lobes reach about halfway from the bore to the face's rim. Drawn at that., harvested
Exit's three lobes, how far each runs back from the front face (as drawn)0.12 in ± 0.06 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: in the oblique photo the lobes' walls run back into the front ring, which the front port opens behind 0.21 in from the face. Drawn a little over half that.
Worked out 0.12 in ± 0.06 in used
An assumption for the drawing, not a reading: in the oblique photo the lobes' walls run back into the front ring, which the front port opens behind 0.21 in from the face. Drawn a little over half that., harvested
Crush washer, outside diameter0.728 in ± 0.02 in 18.5 mmProvisionalPhoto: Primary Arms, APVG200001A_01: the device standing and its crush washer lying beside it, from about 7 to 16 degrees above, 2200 x 1467
Photo 0.728 in ± 0.02 in used
Primary Arms, APVG200001A_01: the device standing and its crush washer lying beside it, from about 7 to 16 degrees above, 2200 x 1467, harvested
Scale: the device's head in the same photo, 565 px across, as od (0.86). Read by the washer's silhouette row by row at a level of 200 of 255: its widest run (478 px) is its outside diameter; the rows at that width (66 px) are its outer face seen nearly side on, its height over the cosine of the view's angle (16 degrees, from its top ellipse: 134 px for 478 across)
478 px of the head's 565 in the same photo.
Crush washer, inside diameter0.5 in ± 0.03 in 12.7 mmProvisionalPhoto: Primary Arms, APVG200001A_00: the device and its crush washer lying beside it, 2200 x 1467
Photo 0.5 in ± 0.03 in used
Primary Arms, APVG200001A_00: the device and its crush washer lying beside it, 2200 x 1467, harvested
Scale: the washer's own outside diameter, as washer_od. Read by the washer's inside over its outside across the ellipse's long axis, 0.687 (about 230 of 335 px), by eye on the photo at 2000 px across
It goes over the 1/2-28 thread.
The thread it is cut for: major diameter0.496 in ± 0.0033 in 12.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A MAJOR DIA .4989/.4924” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
Its sellers: "1/2x28 RH" (Primary Arms), "Thread: 1/2-28 RH" (Rifle Supply). The Army barrel's 1/2-28, as the catalog's barrels are drawn.
The thread it is cut for: minor diameter0.455 in ± 0.002 in 11.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “MINOR DIA .4551 MAX” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
The thread it is cut for: pitch0.036 in ± 0.00005 in 0.9 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
Large ports through each side (counted)2ProvisionalPhoto: Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge
Photo 2 count used
Wing Tactical's three straight views of APVG200001A side by side, muzzle up, 1280 x 1280: the middle one, the left side, the ports to the lens, its top at the right edge, harvested
Scale: along the device, its own length, 667 px (rows 308 to 975), as overall_length (1.83): 364.5 px/in; across, its own width, 298 px at the head and 301 at the rear section, as od (0.86): 347 to 350 px/in. The composite's length over its width (2.24) is 4.5% over every other photo of the device, so the two directions are scaled apart. Read by the silhouette and what shows through it, row by row at a level of 200 of 255; stations are where an edge's run changes, to a pixel or two (0.005 in along), widths are runs of backdrop between dark (± 2 px, 0.006 in across)
Two, a front and a rear, backdrop through both in the side views (Wing Tactical's, Aero's); two a side from above in every top view (the notches either side); Resilient Arms' title: "2 Port Brake".
Small holes either side of the top slot (counted, both sides)6ProvisionalPhoto: Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820
Photo 6 count used
Resilient Arms' picture of APVG200001A from above, muzzle up, the slot and the logo to the lens, 450 x 820, harvested
Scale: along the device, its own length, 770 px (rows 24 to 793), as overall_length (1.83): 420.8 px/in; across, the head's width, 360 px, as od (0.86): 418.6 px/in (the two within 0.5%). Read by the silhouette row by row at a level of 200 of 255, and features inside it placed on a crop at 2.5 times size (± 3 px there, ± 0.003 in)
Three a side in a triangle: Resilient Arms', Wing Tactical's and Aero's top views and Primary Arms' three photos all show three.
Narrow slots underneath (counted)6ProvisionalPhoto: Wing Tactical's three straight views: the left one, the underside
Photo 6 count used
Wing Tactical's three straight views: the left one, the underside, harvested
Scale: along, its own length, 670 px, as overall_length (1.83); across, its head, 297 px, as od (0.86). Read by slots placed by eye on a crop at 1.6 times size (± 3 px there, ± 0.005 in), the outline row by row at a level of 200 of 255
Four under the front chamber, two under the rear: Wing Tactical's and Aero's underside views.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Muzzle thread
- Uppers
- Nordic Components 22RB .22 LR upper, 16", Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
- Barrels
- Taurus TX22 4.6 in Threaded Barrel
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Wing Tactical $80.99 Nov 21, 2026, in stock that day
- Aero Precision $90.00 Nov 21, 2026, stock not said
- AR15Discounts $72.99 Nov 21, 2026, out of stock that day
- Primary Arms $80.99 Nov 21, 2026, out of stock that day
- Aerospace Arms $80.99 Nov 19, 2026, out of stock that day
- Rifle Supply $90.99 Nov 21, 2026, out of stock that day