Barrel
Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System
Bear Creek Arsenal's 16 in 5.56 NATO barrel, the one Primary Arms lists as 1343-B556MM41617-P: 4150 chrome moly vanadium, parkerized, 1:7 twist, a mid-length gas system on a .750 in journal, M4 feed ramps, a 1/2-28 muzzle thread. Sold without a gas block or a gas tube.

- Weight
- 29 oz ± 0.5 oz Conflictpublished: Redcon1 Tactical, Bear Creek Arsenal 16" Contour 4150 Parkerized 5.56 Mid-Length 1:7 Barrel (Mfr Part 1343-B556MM41617(P)), a seller, read Oct 5, 2026Its sources span 27.92 oz to 31.2 oz.
- Lowest price
- $59.99 at Primary Arms, read Nov 21, 2026
- Made for
- Caliber 5.56 NATO
- Maker's number
- 1343-B556MM41617(P)
- Colour
- Parkerized, dark grey
- Drawn as
- modelled
- Maker's page
- bearcreekarsenal.com
In “Budget 16 in carbine”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Barrel length as its maker states it16 in ± 0.1 in 406.4 mmConfirmedPublished: Bear Creek Arsenal, BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System (1343-B556MM41617(P)), Specs, the maker, read Oct 5, 2026
Published “Barrel Length 16” used
Bear Creek Arsenal, BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System (1343-B556MM41617(P)), Specs, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Barrel Length 16”
Primary Arms, Bear Creek Arsenal 5.56 AR-15 Barrel - Mid-Length - M4 - 16" (1343-B556MM41617-P), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
The maker's page; the seller's is the same figure.
Nominal, and Bear Creek doesn't say between which points. Taken as the barrel's own length, breech face to muzzle, as the catalog's two other 16 in barrels are: a mid-length chart on file dimensions its barrel so (14.500 from the tenon's end). The Army's own convention is from the closed bolt's face, which stands 0.126 behind the breech face (bolt_face_behind_breech): its 20 in barrel is 19.884 ±.015 on drawing 8448549. By that convention this barrel would be 0.126 shorter; the ± is taken to cover it. Its photo favours the breech face: at the scale its .750 journal gives it reads 16.66 between its end faces, 1.0% over this reading's 16.50 (the 16 and the extension's 0.501 behind the breech face) and 1.7% over the other's 16.375. Primary Arms and Right To Bear state the same 16.
The gas block journal's diameter0.75 in ± 0.0005 in 19 mmConfirmedPublished: Bear Creek Arsenal, BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System (1343-B556MM41617(P)), Specs, the maker, read Oct 5, 2026
Published “Gas Block System 0.750” used
Bear Creek Arsenal, BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System (1343-B556MM41617(P)), Specs, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Gas Seat Diameter .750”
Primary Arms, Bear Creek Arsenal 5.56 AR-15 Barrel - Mid-Length - M4 - 16" (1343-B556MM41617-P), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
The maker's page; the seller's is the same figure.
Right To Bear ("Gas Block Journal - .750\""), Redcon1 ("Gas Block Size: 0.750\"") and AR15Discounts ("Gas Block Journal 0.75") say the same.
The barrel extension's rear face behind the barrel's breech face0.501 in ± 0.01 in 12.7 mmProvisionalWorked out: {std.ar15.barrel_extension_behind_breech}
Worked out 0.507 in ± 0.03 in
{.flange_front_x} - {.extension_rear_x} - {.tenon_length}, harvested
The flange's front face ahead of the extension's rear face, less the tenon: the rear face is the traced outline's, the flange's thickness the adopted one.
Worked out 0.501 in ± 0.01 in used
{std.ar15.barrel_extension_behind_breech}, harvested
The reference CAD set's Barrel_Extension.step, 1.121 from its front face to its rear end, less the .620 tenon: the readings and their sources are in the standard's ledger (std.ar15.barrel_extension_length, std.ar15.barrel_tenon_length).
One figure for every barrel on this extension (Aero's and BCM's use the same), read face by face off the CAD set; this barrel's own photo gives 0.507 with the flange at the CAD set's thickness, inside its ±.
One extension for the catalog's three 5.56 barrels (2026-10-05, the review of the catalog's models): the reference CAD set's, 1.121 long, less the .620 tenon (tenon_length), as BCM's barrel has it. No callout on the Army's sheets gives it: on the assembly drawing's Section A-A the extension is drawn broken off behind its locking face, its own drawing (8448550) isn't in the package, and Aero's barrel had 0.46 scaled off the 1/1 view, whose own callouts put its scale anywhere within 8% (that reading stays in that barrel's ledger). Until 2026-10-05 this barrel's own photo was adopted at 0.57, by a flange read 0.191 thick (flange_front_x): that put its breech 0.07 in ahead of BCM's and its muzzle 0.06 further out than a 16 in barrel on the same extension. The photo's reading is now made with the flange the CAD set's, and agrees.
The closed bolt's face behind the barrel's breech face0.126 in ± 0.007 in 3.2 mmConfirmedStandard: US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly), Section A-A: the .3300 DIA DATUM 1.6206 REF from the extension's locking face, the breech face .283 +.006 from it; with Pacific Tool's chamber print 8008, '5.56 Nato Military' (10/31/05, citing military prints 8448649, 8448549, 8448550; 5.56x45mm_Chamber_Schematic.jpg in the user's TDP folder), 1.4636 MIN from the bolt face to that datum; user-supplied scans, PDF page 212
Standard “1.6206 REF and .283 +.006 (8448548); 1.4636 MIN (the chamber print, bolt face to the .3300 datum)” used
US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly), Section A-A: the .3300 DIA DATUM 1.6206 REF from the extension's locking face, the breech face .283 +.006 from it; with Pacific Tool's chamber print 8008, '5.56 Nato Military' (10/31/05, citing military prints 8448649, 8448549, 8448550; 5.56x45mm_Chamber_Schematic.jpg in the user's TDP folder), 1.4636 MIN from the bolt face to that datum; user-supplied scans, PDF page 212, from the site owner
The datum is 1.6206 - .283 = 1.3376 ahead of the breech face, and 1.4636 ahead of the bolt's face.
Where a barrel's length is measured from by the Army's convention: not used for this barrel's own length (length's note), kept because it sizes the question.
The barrel's tenon: its breech face behind the shoulder the extension's front face seats on0.62 in ± 0.001 in 15.7 mmConfirmedWorked out: {std.ar15.barrel_tenon_length}
Worked out 0.62 in ± 0.001 in used
{std.ar15.barrel_tenon_length}, from the site owner
The Army's drawing 8448549, .620 ±.001: in the standard's ledger since 2026-10-05.
End to end: the extension's rear face to the muzzle face16.501 in ± 0.1 in 419.1 mmProvisionalWorked out: {.length} + {.extension_behind_breech}
Worked out 16.501 in ± 0.1 in used
{.length} + {.extension_behind_breech}, harvested
The length the photo's lengths are scaled to: the published 16 from the breech face, plus the extension behind it (16.57 until 2026-10-05, with this barrel's own reading of its flange). At the scale its .750 journal gives, the photo reads 16.66 between its end faces, 1.0% more: inside what the yaw's cosine and a pixel of the journal's width leave open, and the ± here covers it.
The diameter of the long section under the handguard, between the chamber's taper and the gas block's collar0.698 in ± 0.006 in 17.7 mmProvisionalPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.6976 in ± 0.006 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: its gas block journal's width on the same photo as the published .750 (journal_od), edges read at 235 of 255. Read by its width against the journal's, each column's scale taken from the line through this section's own widths (tools/trace.py, tube): the value at which the traced outline's journal (x 9.75 to 11.1 behind the collar) reads 0.750
The trace's tube. Its width along the photo is a line, 84.0 px at column 1100 to 85.2 at 1780 (the photo's yaw); the journal ahead of it reads 89.3 px where that line reads 82.9. Set so that the traced outline's journal reads the published .750: the journal is the scale, this section carries it along the photo.
The barrel extension's rear face, from the flange's rear face (negative: inside the receiver)-0.996 in ± 0.03 in -25.3 mmProvisionalPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo -0.996 in ± 0.03 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by −x_min in y [0.53, 0.6] of the traced outline (tools/trace.py); the flange's rear face, which seats on the receiver's front face, from the extension's rear face
The rear face is taken behind its rim's arc (0.036 in of sag: the silhouette's tip is the face's near rim). The reference CAD set's extension has 0.990 here; Aero's barrel reads 0.98 and BCM's 0.984 by their own photos.
The flange's front face, which is the extension's front end, from the flange's rear face0.131 in ± 0.005 in 3.3 mmConflictWorked out: {std.ar15.barrel_extension_flange_thickness}
Photo 0.19 in ± 0.023 in
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by (x_max in y [0.53, 0.6]) − (x_min in y [0.53, 0.6]) of the traced outline (tools/trace.py); the flange, rear face to front face
Worked out 0.131 in ± 0.005 in used
{std.ar15.barrel_extension_flange_thickness}, from the site owner
The reference CAD set's Barrel_Extension.step, its planes across its axis: the reading and its source are in the standard's ledger since 2026-10-05.
The photo's 0.19 spans the flange's two corners, each its rim's arc seen from off square, and the same outline's flat top is 0.09 to 0.12; the CAD set's faces are between the two readings. And it is the extension the three 5.56 barrels share (extension_behind_breech).
photo and model differ by 0.059 in beyond what each states it is good to.
The flange's thickness. Its front face seats on the shoulder of the barrel's tenon, .620 ahead of the breech face (tenon_length). The photo's reading is across the flange where the outline stands over 0.53 in from the axis, which takes in both of its corners: the lens sees this end from about 7° off square, so each corner is its rim's arc, and the outline's own flat top is 0.09 to 0.12 long (x 1.04 to 1.12 or 1.16 from the rear face). BCM's flange reads 0.095 between its corners the same way, Aero's 0.11 to 0.13; the CAD set's faces are 0.131 apart.
The barrel extension's flange, its diameter1.175 in ± 0.027 in 29.8 mmProvisionalPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 1.175 in ± 0.027 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by height of the traced outline (tools/trace.py); the silhouette's widest: the flange
The barrel extension's diameter behind its flange0.99 in ± 0.027 in 25.1 mmCorroboratedPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.99 in ± 0.027 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by height (tooth tops, max over 0.05 in windows) along x [0.25, 0.85] of the traced outline (tools/trace.py); the extension behind its flange
Standard “DIAMETER NOT TO EXCEED .9990 FOR THIS LENGTH AFTER ASSEMBLY AND BEFORE FINISH”
US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly); user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 212: the main view, from the site owner
A limit, on the Army's barrel: an extension is made just under it.
The outline's own reading, which is what is drawn; the Army's limit is 0.009 over it, inside the reading's ±.
It goes into the receiver's 1.000 bore. The photo reads it 0.9% under the Army's limit, inside its ±: a check of the photo's scale at the breech end, where the tube's line is carried 250 columns past its last station.
The diameter of the chamber section, ahead of the flange0.981 in ± 0.027 in 24.9 mmCorroboratedPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.981 in ± 0.027 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by height (tooth tops, max over 0.05 in windows) along x [1.25, 1.65] of the traced outline (tools/trace.py); the chamber section between the flange and its taper
Standard “.9800 ±.0005 ANGULAR DEVIATION CONTROL DIAMETER”
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 213: the main view, from the site owner
The Army's barrel behind its taper; a commercial barrel is turned to the same seat for the barrel nut and the handguard's cap.
The outline's own reading, which is what is drawn; the Army's figure is a thousandth under it.
The photo reads the Army's figure within a thousandth: the second check of its scale at the breech end, and independent of the first.
The diameter of the collar the gas block stops against0.979 in ± 0.027 in 24.9 mmProvisionalPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.979 in ± 0.027 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by height (tooth tops, max over 0.05 in windows) along x [9.15, 9.6] of the traced outline (tools/trace.py); the collar behind the gas block journal
The collar's front face, where the gas block journal begins, ahead of the flange's rear face8.846 in ± 0.095 in 224.7 mmProvisionalPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 8.846 in ± 0.095 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by (x_max in x [9.0, 10.6] in y [0.41, 0.47]) − (x_min in y [0.53, 0.6]) of the traced outline (tools/trace.py); the collar's front face, where the journal begins, ahead of the flange's rear face
A gas block stops against it. From the flange's front face (the tenon's shoulder) it is 8.72; a mid-length chart on file has 8.750 there (AR-15_M4_Barrel_Dimensions.jpg: a third-party illustration of a 14.5 in barrel).
The muzzle shoulder ahead of the flange's rear face14.911 in ± 0.151 in 378.7 mmProvisionalPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 14.911 in ± 0.151 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by (x_max in y [0.29, 0.35]) − (x_min in y [0.53, 0.6]) of the traced outline (tools/trace.py); where the silhouette drops to the thread, ahead of the flange's rear face
Where the thread begins and a muzzle device seats. An independent look at the same place on another 16 in barrel: Aero's photo of its complete upper (a copy on file), framed by its two lug holes and scaled by its rail's teeth (14.59 px a tooth at the receiver, 14.38 at the handguard's front), has its A2 flash hider's front face 16.83 ahead of the receiver's front face, so its shoulder 14.98 ± 0.1 (the device's 1.75 and a washer behind it, 0.10 allowed for it); that barrel's own photo has 14.89, and this barrel's is 14.91 (14.974 until 2026-10-05, when its length was scaled to an extension 0.07 longer behind the breech).
The muzzle thread's length, shoulder to muzzle face0.595 in ± 0.03 in 15.1 mmCorroboratedPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.595 in ± 0.03 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by (the max end's face: the silhouette's tip at 16.548 less its rim's arc, 0.046 in of sag at radius 0.19 (the end is seen from 13.5° off square; arc fitted over 121 rows, rms 0.004)) − (x_max in y [0.29, 0.35]) of the traced outline (tools/trace.py); the muzzle face, behind its rim's arc, ahead of the shoulder
Standard “.63”
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 213: the main view, the shoulder to the muzzle, from the site owner
The Army's barrel for the same 1/2-28 thread.
This barrel's own photo. A device's limit is compared with it: the A2's threaded bore is .68 deep, and either figure is inside it.
The photo's ± is set by hand: the tool sums each end's whole scale uncertainty, and the two ends are 0.6 in apart on one scale (two edges at ± 1.5 px, and the muzzle face behind its rim's arc: ± 0.03). The Army's barrel has .63; this one's photo reads 0.035 less, at the edge of its ±.
The diameter behind the muzzle thread0.744 in ± 0.026 in 18.9 mmProvisionalPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.744 in ± 0.026 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by height (tooth tops, max over 0.05 in windows) along x [15.0, 15.7] of the traced outline (tools/trace.py); the section behind the muzzle shoulder
The muzzle thread over its crests0.496 in ± 0.025 in 12.6 mmCorroboratedPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.496 in ± 0.025 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from bca-556-16-mid-barrel.handguard_section_od = 0.6976 in, the tube's own width column by column: 84.0 px over columns 1080–1200, 84.1 px over columns 1200–1400, 84.6 px over columns 1400–1600, 85.2 px over columns 1660–1790; a line through them (rms 0.19 px) changes +1.7% from column 1080 to 1790, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 120.1 px/in there. The axis is the tube's centre line (tilt +0.52°, rms 0.08 px). Lengths then scaled by 0.9904 so that the end faces are bca-556-16-mid-barrel.overall_length = 16.501 in apart: at the tube's scale they read 16.662 (+1.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.046 in over radius 0.190 (rms 0.004), the rear end's rim sags 0.036 in over radius 0.300 (rms 0.003). Read by height (tooth tops, max over 0.05 in windows) along x [16.0, 16.35] of the traced outline (tools/trace.py); the thread's silhouette over its crests
Standard “1/2-28 UNEF-2A MAJOR DIA .4989/.4924”
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 213: Section M-M, from the site owner
The middle of the two limits, ± half their spread.
The outline's own reading, which is what is drawn; it is inside the drawing's limits.
The check of the photo's scale at the muzzle end, 950 columns ahead of the tube's first station: the thread is 1/2-28 by its maker, and its silhouette reads inside the Army's limits for that thread.
The gas port ahead of the collar's front face0.295 in ± 0.005 in 7.5 mmConfirmedStandard: US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly); user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 212: the main view, the gas port from the shoulder the front sight stops against (datum A)
Standard “.295” used
US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly); user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 212: the main view, the gas port from the shoulder the front sight stops against (datum A), from the site owner
The Army's barrel: what a gas block's own port is placed for.
Photo 0.275 in ± 0.03 in
Primary Arms 1343-B556MM41617-P_01: three-quarter view, the breech at the top left, 2200 x 1467, harvested
Scale: two ways on that photo: the journal's width there (103 px, the published .750) with the view's angle from the collar's rim (an ellipse 23 by 65 px: 20.5 degrees), and the collar's own length there (88 px along the axis, 0.62 in in the side trace). Read by the port's centre (1234, 739) along the axis from the collar's front face on the port's own generator: 37 px. 0.288 by the journal's width, 0.263 by the collar's length; points picked by eye on a 5x crop
Published “0.300”
AR-15_M4_Barrel_Dimensions.jpg in the user's TDP folder (Spec_Sheets): a third-party illustration of a 14.5 in mid-length barrel, no drawing number, a page, from the site owner
The Army's drawing, which gas blocks are made to; this barrel's own photo reads 0.02 less, inside its ±, and the chart 0.005 more.
The side photo doesn't show the port (it is on the far side; the dimple opposite it shows on the lower edge, 0.23 ahead of the collar). Primary Arms' three-quarter photo does.
The gas port ahead of the flange's rear face9.141 in ± 0.1 in 232.2 mmProvisionalWorked out: {.journal_shoulder_x} + {.gas_port_ahead_of_shoulder}
Worked out 9.141 in ± 0.1 in used
{.journal_shoulder_x} + {.gas_port_ahead_of_shoulder}, harvested
The catalog's two other mid-length barrels have 9.17 ± 0.04 (Aero's) and 9.13 ± 0.05 (BCM's) by their own photos: a mid-length gas tube has to reach each. 9.178 until 2026-10-05 (overall_length).
The gas port's diameter0.075 in ± 0.015 in 1.9 mmCorroboratedPhoto: Primary Arms 1343-B556MM41617-P_01: three-quarter view, the breech at the top left, 2200 x 1467
Photo 0.075 in ± 0.015 in used
Primary Arms 1343-B556MM41617-P_01: three-quarter view, the breech at the top left, 2200 x 1467, harvested
Scale: the journal's width in that photo, 103 px, as the published .750 (journal_od). Read by the port's dark spot, 10 px across the barrel (11 by 7 px on a 5x crop, the longer way along the axis, which the view shortens by the cosine of 20.5 degrees)
Published “0.075"ø Gas Port”
AR-15_M4_Barrel_Dimensions.jpg in the user's TDP folder (Spec_Sheets): a third-party illustration of a 14.5 in mid-length barrel, no drawing number, a page, from the site owner
This barrel's own photo; the chart's figure is the same.
Not published. Read off Primary Arms' three-quarter photo, for the hole the model cuts; a mid-length chart on file has the same figure, and the Army's rifle-length barrel .092 (8448548).
The bore's diameter (across the lands)0.22 in ± 0.0005 in 5.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 2 of 2: Section U-U, rifling detail; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 211
Standard “.219 DIA +.001” used
US Army TDP drawing 8448549 (Barrel), sheet 2 of 2: Section U-U, rifling detail; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 211, from the site owner
Published “Bore Size 0.219”
Pacific Tool, chamber print 8008, '5.56 Nato Military' (10/31/05; 5.56x45mm_Chamber_Schematic.jpg in the user's TDP folder), the maker, from the site owner
The Army's drawing, at the middle of its limits; the reamer maker's print has its lower one.
The cartridge's, for the hole the model cuts: Bear Creek states "Caliber 5.56 NATO" and no bore.
The barrel indexing pin's diameter0.125 in ± 0.00025 in 3.2 mmConfirmedStandard: US Army TDP drawing 8448551 (Pin, Barrel Indexing), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 119
Standard “.1255 DIA -.0005” used
US Army TDP drawing 8448551 (Pin, Barrel Indexing), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 119, from the site owner
The pin in the top of the extension, which the receiver's notch takes: the Army's own part. The same drawing has it .185 -.005 long.
The barrel indexing pin's top above the extension's surface0.094 in ± 0.01 in 2.4 mmConfirmedStandard: US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly), Section A-A at 2/1; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 212
Standard “.094 MAX” used
US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly), Section A-A at 2/1; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 212, from the site owner
A limit, and the model draws the pin at it. In the side photo the pin stands about 30 degrees round from the upper edge and shows 4 px (0.035 in) of it.
The barrel indexing pin's axis behind the flange's rear face0.063 in ± 0.02 in 1.6 mmProvisionalPhoto: Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467
Photo 0.063 in ± 0.02 in used
Primary Arms 1343-B556MM41617-P_02: the barrel from the side on white, the muzzle at the left, 2200 x 1467, harvested
Scale: the trace's scale there, 121.6 px/in. Read by the upper edge stands above the lower one's radius from the flange's rear face (column 1973) to column 1981: the pin's rear half, begun at the face; its axis half its diameter (index_pin_d) behind the face
The pin stands against the flange, as the Army's Section A-A draws it and Primary Arms' three-quarter photos show it.
The muzzle thread's minor diameter (its roots)0.455 in ± 0.002 in 11.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2: Section M-M; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 213
Standard “MINOR DIA .4551 MAX” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2: Section M-M; user-supplied scan (Distribution Statement F, Colt proprietary notice), PDF page 213, from the site owner
The Army barrel's 1/2-28 thread, for the 1/2 x 28 Bear Creek states: the roots of the rings the model draws. Their crests are the photo's (thread_od).
The muzzle thread's pitch0.036 in ± 0.00005 in 0.9 mmConfirmedPublished: Bear Creek Arsenal, BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System (1343-B556MM41617(P)), Specs, the maker, read Oct 5, 2026
Published “Thread Pitch 1/2 x 28” used
Bear Creek Arsenal, BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System (1343-B556MM41617(P)), Specs, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
28 threads to the inch.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Barrel extension
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Muzzle thread
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake, HUXWRX Flash Hider-QD 556 1/2x28, Mil-spec A2 flash hider, 1/2-28 (drawing 9349051), Nordic Components 1/2-28 thread protector (ships on the 22RB), Otter Creek Labs Polonium, Otter Creek Labs Polonium K, Precision Armament M4-72 Severe-Duty® Compensator, SilencerCo Sparrow 22 (fit unchecked), SureFire ProComp 556 Muzzle Brake, SureFire SOCOM 3-Prong Flash Hider, SureFire SOCOM 4-Prong Flash Hider, SureFire WARCOMP Flash Hider, Taurus TX22 Thread Protector, VG6 Precision GAMMA 556
Gas block journal
- Gas blocks
- Aero Precision .750 low profile gas block, BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers, BCM Low Profile Gas Block (steel with set screws) 750, SLR Rifleworks Sentry 7 Set Screw Adjustable Gas Block, Superlative Arms .750" Adjustable Gas Block, Bleed Off - Set Screw
Gas system length
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $59.99 Nov 21, 2026, in stock that day
- Bear Creek Arsenal $62.93 Oct 26, 2026, in stock that day
- AR15Discounts $79.95 Nov 21, 2026, in stock that day
- Dirty Bird Industries $79.95 Nov 21, 2026, in stock that day
- Redcon1 Tactical $123.95 Nov 21, 2026, out of stock that day
- Right To Bear $124.99 Nov 21, 2026, out of stock that day